Not my error, element it good. But thanks for posting a good diagnostic video, I think I've got a fault with one of the micros. Saved me a bit of time before I pull it from service. Much appreciated! 👍👌
howsit Jan, thanks for the great video, it really helped me in a tight situation here, to be able to find out what the problem is and repair it instead of tossing it. Quick question, how much did the new element cost you? i got a quote of R1600, just want to check if its ball park or not.
Jan - great videos, just a quick question.... Im working on diagnosing the exact same dishwasher... wont complete a cycle and I think its got something to do with heating - - starts fine on a 28 minute cycle but then freezes at 19 minutes - water inside is cold and nothing happens.. checked everything!!! new thermostat... element bells out fine... any advice or notes? any help would be appreciated...
Hi Jan... I have a dishwasher just like the one you was fixing ...and I tested the micro switch and the heating element and both were working properly ... so what els should I test to fix the F5 problem ... Thanks
Good day People.. Any info for me regarding the f5 error code? Test the thermostat 25ohs test the thermostat working fine but still f5 error no warm water.. Thanks
Hi Jan. Please help. Same F5 error. Element tests ok. As do all the switches. Still not working. Is pumping on rince and dry as per your previous video but that’s it. Nothing else.
Hi Jan. Please can you advise me where you managed to source and purchase the ELE300 SAMSUNG DISHWASHER ELEMENT in your video. I've been quoted a ridiculous price of R1700.00
Hi Jan Ek het presies dieselfde masjien Werk vir so 6 quick 40 grade suklis Dan gee dit E3 error Ek die control panel al vervang en die drain pomp Werk maar dan kom die E3 kode terug Enige raad of advies Asb
How could you access it it is too narrow it is impossible. I have the a same model it has leakage but I can't reach the whole stuff it is complicated and not easy to be accessed.
well i changed it last year, worked 100% and now im getting an E3 Error lol, bought a new dishwasher after the wife played her boycott card. but i still can not let it go, so i changed the inlet valve after checking online and thats not it, also checked the door switch and not it, so im going to check the element again and the stepper motor, see whats cutting there
@Michael Thurman yes! I did actually sort it out. Check the heater housing, there is a limit switch under a rubber trigger pad, test that limit switch, mine was broken, I just replaced it, R22 from builders. Sorted!
The machine is not getting water, or the water pressure is low. Can also happen when supply hose has a kink or obstruction. If the supply hose has a crack or perished washer (seal) but the water supply is fine you may see a leak. Sometimes the failure lies at the stopcock or tap.
Just got this error on my dishwasher. Thanks for the tutorial man. Im going to attempt to fix it now.!!!!! Great video.
Thanks for video, my element is damaged. But I can't find any online. Where did you buy this?
Not my error, element it good. But thanks for posting a good diagnostic video, I think I've got a fault with one of the micros. Saved me a bit of time before I pull it from service. Much appreciated! 👍👌
I had an F3 code, but this video series helped nonetheless. Dankie Jan.
howsit Jan, thanks for the great video, it really helped me in a tight situation here, to be able to find out what the problem is and repair it instead of tossing it. Quick question, how much did the new element cost you? i got a quote of R1600, just want to check if its ball park or not.
Thank you Jan, i have followed step by step and my dishwasher is working again !
Thx buds apresiated good video am going to attempt tomorrow 🎉
Thanks Jan. I have one like this, but suddendly no power on the display. Is there a fuse or control board?
Dankie vir die video Jan. By watter winkel het jy n nuwe element gekry?
Dit was Tecsa, maar Van Biljoens sal ook hê.
@@JanDuToit Baie dankie, sal gaan kyk.
Jan - great videos, just a quick question.... Im working on diagnosing the exact same dishwasher... wont complete a cycle and I think its got something to do with heating - - starts fine on a 28 minute cycle but then freezes at 19 minutes - water inside is cold and nothing happens.. checked everything!!! new thermostat... element bells out fine... any advice or notes?
any help would be appreciated...
Neil I have the same problem where it stops on 19 minutes do you know maybe what was the issue with your machine ?
Same here. Element and micro switch is good but F5 error
was this error resolved , and what was the fix
@@jp1274 was this resolved and what was the fix
@@siryousaf was this resolved and what was the fix
Hi Jan... I have a dishwasher just like the one you was fixing ...and I tested the micro switch and the heating element and both were working properly ... so what els should I test to fix the F5 problem ... Thanks
Good day People.. Any info for me regarding the f5 error code? Test the thermostat 25ohs test the thermostat working fine but still f5 error no warm water..
Thanks
@@ebenkoen3422 I had the same problem, replaced switch, closed cap one about 5.33 min in the video. not sure what it's function.
Great Video Jan 💯
Hi Jan. Please help. Same F5 error. Element tests ok. As do all the switches. Still not working. Is pumping on rince and dry as per your previous video but that’s it. Nothing else.
Jan, was it a fix?
Hi Jan. Please can you advise me where you managed to source and purchase the ELE300 SAMSUNG DISHWASHER ELEMENT in your video. I've been quoted a ridiculous price of R1700.00
Sorry..... Just read further down the line and got the replies.....blonde moment.
hi, i have the same dishwasher but i have No Power, No Lights , what can i do thank you
My dishwasher is vestel and I have the same issue F5 showing after the wash could it be the sam
Hay Jan how are you please can you help i replaced the element but now i have a e3 issue please help i live in the uae and there is no help here
Hi Jan Ek het presies dieselfde masjien Werk vir so 6 quick 40 grade suklis Dan gee dit E3 error Ek die control panel al vervang en die drain pomp Werk maar dan kom die E3 kode terug Enige raad of advies Asb
Здравствуйте. У вас получилось решить проблему ошибки Е3?
How could you access it it is too narrow it is impossible. I have the a same model it has leakage but I can't reach the whole stuff it is complicated and not easy to be accessed.
Very very thanks
thank you my frind
hi Jan waar kry ek so n element myne lees 1.3 m ohms en hy lyk siek
Van Biljoens of Tecsa.
well i changed it last year, worked 100% and now im getting an E3 Error lol, bought a new dishwasher after the wife played her boycott card. but i still can not let it go, so i changed the inlet valve after checking online and thats not it, also checked the door switch and not it, so im going to check the element again and the stepper motor, see whats cutting there
@Michael Thurman yes! I did actually sort it out. Check the heater housing, there is a limit switch under a rubber trigger pad, test that limit switch, mine was broken, I just replaced it, R22 from builders. Sorted!
The Error E2 what the problem please
The machine is not getting water, or the water pressure is low. Can also happen when supply hose has a kink or obstruction. If the supply hose has a crack or perished washer (seal) but the water supply is fine you may see a leak. Sometimes the failure lies at the stopcock or tap.
The washing machine doesn't work at all.
haha Can you fix mine for me...