Right. Really not worth arguing about. It has decayed to about .025% of the original amount produced, not a 100% "gone", just the functional equivalent as we are not talking uranium here. The room may smell a bit like after a lightning storm, but that is about it. What we were really concerned about was getting the level down below the ppm that Osha determined was unsafe. You are technically correct...sorry if I was misleading,
In my experience, yes on all odor issues I was addressing ... but ... careful ... take it in stages is my advice. Just hammering an area with a chemical that essentially oxidizes things can be hard on various products including plastic. My point, gradually work your way up to where you want to be and get a feel for how it works. Lastly, I remember one lady used this machine as she burned a whole chicken and it pumped the smoke through the ductwork and the hole house stank bad like burned meat. Used it for a couple of days and got the odor under control but the final bit just took time. Remember to agitate the air with fans so the Ozone molecules get everywhere and not just around the machine. Good luck.
In my opinion, I think so. It is all about exposing the surface area to the ozone molecules to bond too. The point is your oxidizing i.e. bonding an unstable oxygen molecule to things, be it mold, molecules etc
Great vid, The are selling similar types of these generator , Ireland for €2,400 : for cleaning cars / I drive a 8 seater mim bus , I saw a ozone generator on Amazon ; Cycuny 200000 mg/hr , do anybody think this generator would do the job ; thank you /
Right. Really not worth arguing about. It has decayed to about .025% of the original amount produced, not a 100% "gone", just the functional equivalent as we are not talking uranium here. The room may smell a bit like after a lightning storm, but that is about it. What we were really concerned about was getting the level down below the ppm that Osha determined was unsafe. You are technically correct...sorry if I was misleading,
Should I be able to see the sparks when I look into the machine when it first starts up?
Not sure where you are seeing them but I have seen sparks as well ... which is the crackling noise, which is what is making ozone....
The more time you leave the machine running the better results?
In my experience, yes on all odor issues I was addressing ... but ... careful ... take it in stages is my advice. Just hammering an area with a chemical that essentially oxidizes things can be hard on various products including plastic. My point, gradually work your way up to where you want to be and get a feel for how it works. Lastly, I remember one lady used this machine as she burned a whole chicken and it pumped the smoke through the ductwork and the hole house stank bad like burned meat. Used it for a couple of days and got the odor under control but the final bit just took time. Remember to agitate the air with fans so the Ozone molecules get everywhere and not just around the machine. Good luck.
Is it possible to sterilize personal clothes with ozone?
In my opinion, I think so. It is all about exposing the surface area to the ozone molecules to bond too. The point is your oxidizing i.e. bonding an unstable oxygen molecule to things, be it mold, molecules etc
YOU DONT Understand Half Lifes
Four (4) Hours Does Not Mean its 100 % Gone
Thigs are creepy sounding. Hard to get rid of.
The sound is a bit weird but amazingly effective.
Great vid, The are selling similar types of these generator , Ireland for €2,400 : for cleaning cars / I drive a 8 seater mim bus , I saw a ozone generator on Amazon ; Cycuny 200000 mg/hr , do anybody think this generator would do the job ; thank you /