Hey guys! Thank you so much for stopping by and watching the video! Give it a like rating if you enjoyed and drop me a comment. I absolutely love how this build came out, especially with all of the custom wrapped cables inside the PC! @hytebrand was nice enough to send me out their new Y70 (Non-touch) PC case and @superflower sent out their Leadex Vii 1000w PSU in white for the build. Everything included in the build is listed below, including what I used for the cable wraps: PC: Case: amzn.to/3JodHVt CPU: amzn.to/3J5ig7f GPU: amzn.to/3PS9Aoh Motherboard: amzn.to/49rUj4z PSU: www.newegg.com/super-flower-l... CPU Cooler: amzn.to/3U6UJZE Storage: amzn.to/3TNg3Cc RAM: amzn.to/3UbmsZy Fans (Side and bottom): amzn.to/3W7rPdF (x6) Fans (Top): amzn.to/3U6TDx3 Fan (Rear): amzn.to/4aC0nJm Cable Wrap (Outer): amzn.to/4ao188t - 1 pack should be enough for all cables but I would probably do 2. Cable Wrap (Inner): amzn.to/3VVWXfI - Get 1/4", 1/2", and 3/4" for different size cables. - 1/4" was used for smaller cables like front panel connectors, fan, and AIO cables. 10ft is probably OK but I did 25ft, and had some extra. - 1/2" was used for all PSU cables and AIO tubes. I also did 25ft of this but had extra. -3/4" was only used for the SATA PSU cable. I didn't use very much of this and 10ft was fine. You will also need a pair of scissors to cut wrap to length, and a lighter for the inner wrap, to prevent fraying on the inner cable once it is cut. I also used some white electrical tape. Thanks for your support, Danny
Pc build looks great can you get Hyte y70 non touch in black because my setup is black and i already have the black y60 and the y70 non touch is so much nicer
I wanna edit and fix the grammatical mistakes I looked over so badly that I don't get the "AcShAuLLy 🤓". But don't wanna lose the heart at the same time
@@Gamcoasterbro I read this comment, finished the video, saw Kratos, giggled and came back to like this comment, re-read it again while doing so, and all these times I never noticed the mistake until I read THIS comment of yours. No need to change the errors friend, our human monkey brains fill in the gaps for us :)
@@DanKamYouKnow How is the pc holding up till now? Does this combo of the 7950x3d paired with the 4080 run cool? I'm about to build a similar setup but only difference is I'll be using the 7800X3D.
My mom watches your channel, we are building a pc soon. Thank you for all your videos and thank your mom for making you in the first place! (also the videos are extremely satisfying)
Best PC master race channel on YT , love it ! I just built basically the same white rig with a 4090 and 7800x3d but went with the icue h150 link system. Loving it. I wasn’t going to build but I’ve been watching all your videos lately after finding you on YT and you inspired me lol. I upgraded from my aging 2019 build with a 9700k/2080. I need those cable wraps now darnit !!
I’m so glad I found this video cause I was gonna do the 3 120mm fans on bottom and side and a 140mm on the back and 3 120mm on my AIO and wasn’t sure how to run the intake and exhaust!! Now I do!! THANK YOU!! You’re the absolute best when it comes to gaming PC’s!!
9:21 "'white power' supply" whoops! But seriously, impressive build, I'm ordering the wraps to mimic this on my own because I really like the clean cable management. My y70 is a mess in the back right now.
I have to admit that this build looks smooth and it has a space station vibe I would love to see the build perform with high gaming and fresh rate gameplay? I love your calming PC videos. Thanks Dan
im super proud of the inside of my pc, just did my first major upgrade not long ago. but the back side is a rats nest of wires. i needed this video lol
I’m in love! Action Figure enhancement, white clean look. Amazing cable management! I bought a Clx PreBuilt because I have much to learn before feeling safe to build. You’re videos are funny!
oh my god i follow u on tiktok and i stumbled upon ur yt channel 😭 im actually completely new to pc builds and such but im getting the hyte y70 touch and this already boosted my excitement for when it arrives
this video was so good I just built my pc(well I haven't finished it) because all your videos have helped me and inspired me to build my own instead of buying a pre built
now here's a unique and cool way to do some cable management without spending a fortune on custom cables :D (even though the build itself costs about a fortune and a half) great job and awesome build!
I'm following you since a month and I recently took a new pc case to change my old pc case. I tried to do two days, and it took all day, but I couldn't. Then I gave up, and I bring my computer to the mechanic. Now it is all good. Now I watched your video, and I'm laughing my luck because the video released after I finished my pc case
That is CLEAN! And maybe it's just me,but it also looked like putting in that little bit of extra effort with the cables in the beginning made other tasks during the build easier to do when the time came. Very nicely done!
This appeased every ounce of my OCD for wires. Cables, spreading thermal paste...and the black fan controller on H for contrast, matching low tone LED! 💯 on everything! If cables allowed, I'd have that on a constantly rotating platter 😍 but then I would get nothing else done because I'd stare at it all day 😅
First time I’ll be building my own PC and I chose the Hyte Y70 for the open concept to display figures and such. This video is informative, methodical, and is very pleasing to see really nice cable management Build: -Ryzen 7 7800X3D -Gigabyte Gaming OC 4070Ti Super -MAG A750GL PCIE5 MSI PSU -MSI Tomahawk B650 mobo -2TB Samsung 990pro SSD -32GB Ram DDR5 Vengeance 6000 -Arctic Liquid Freezer III (swapping fans for Lian Li Uni for the top, repurposing the fans for bottom intake) -x6 120mm Lian Li Uni fans (3 for vertical intake and 3 for swapping on the AIO top exhaust) -1x 140mm for Rear Exhaust -*** Repurposing the 3 Arctic fans that came with the AIO as the bottom intake fans -Hyte Y70 -***I also purchased the cable recommendations too, thank you for providing that info! Will be gaming on a TUF Gaming 27" 4k 144hz Monitor too! Love you content and how smooth you are with it man, keep up the hard work!
Such a beautiful build sir, love it! Been watching your videos for inspiration and finally building my own, so thank you! I tried following all of the fan cable connections but lost track of the rear exhaust cable. Is that plugged into the motherboard? And then the 3 other sets (top/bottom/side) are plugged into the controller? Stay blessed sir! ❤
good build, its great to see hardware enjoyers becoming "famous" you deserve it its the best thing when you are send and can buy a bunch of hardware, i love hardware but i dont have a lot of money so i'm happy when i see a guy that really likes it and have the chance to test out a lot of things
$1500 GPU and the most impressive piece of this build is the extra $30 invested into cable management. Bravo man, that's super clean. Definitely gonna try this out on my next build. 👌
i actually want to build a pc but i have no idea where should i start i've used only laptops so far so thats going to be the first setup i build. i have some budget and i would really appreciate your reccomendations
Man I am a big fan of you and watching your content for a long time. good to see you build a new Pc. Can I get a heart ? please I am just 17 years old !!
Absolutely beautiful creation! I WAS planning on upgrading to a 3090 and doing a case swap to a black h9 flow but this build inspired me so much i think im gonna go with a y70 and try your cool cable wraps! Anyways love the build 🔥🔥
Thanks! Can’t go wrong with the H9 or the Y70! My last build was the H9 Flow and I loved it. Although similar, both cases are so different. Good luck with yours!
Amazing! I just made my first computer build (white) this week and was watching your videos and saw how good the custom cable management was but didn't know how you did it!!
This is so helpful, I’m gonna save this video because I have a white build but my pcie cables are black and it will help keep with the white build and organize my cables
In my case, I do not recommend using electrical tape because over time it becomes sticky. It might be better to use some thermal insulation for cables and with a heat gun or even a lighter, make it shrink to fit the size of the cables. Btw. Nice video I love your shorts 😎
Hey Dan, I was inspired by your build and planning on building a pc similar to this, I am using the exact same case, aio, and fans but, I am a bit confused on the aio cooler and replacing its fans with the SL V2. I see on the video you had two wires from each side of the fans on the aio. Would you mind explaining to me what cables you used? Also, I was going to plan on using the fans that came with the cooler but putting it in the bottom to cut costs of buying more fans. But, after looking at the manuals, I am getting more confused and wondering if it is even possible?
I have the y70 touch (Not a Flex Just Don't Know If The Back Of The Case Is The Same Or Similar) and was wondering with the power supply, since it is mounted vertically should the fan be facing the back of the case where the meshed design is or towards the motherboard where it is just flat and solid, don't want to risk making a mistake and the power supply overheating???
I literally just finished my Y70 WC build and now I have to cut off all my stupid zip ties and wrap all my cables because this looks amazing. Also, I ordered a Luke Skywalker action figure too. 😝 Clean build man. Very clean.
I just realized.. You and Kratos look like 😮❤️🔥 from God of War. 😢 Thank you for step by step video (edit) you did put a GOD OF WAR FIGURE AT THE END 😭😭❤️🔥✊🏼
Do you have a video on your channel for first time users making their computer ready for gaming? Like all the stuff you gotta do such as turn off mouse accel and disable background apps and other stuff I keep forgetting?🥺
Thanks! I used to post straight forward tutorials and reviews, but then started doing my skit style short form content, and was really focused on that. Now I’m trying to blend a good mix of both when I have time!
Wow, that feels clean, whatever i buy a pc case and the components, i would love to manage the cables more in the back of the pc case so it won't become a pile of something that gets the component in it's way.
Hey dan, i need help with my pc, i need to know how much my pc in cad, its specs are 128 gigs of ram EVGA founders edition 1080ti, Intel xeon E5 2699 v4 cpu and 9 tb storage
@@krispydreams6262 alr, so would 32bg of ram fix my stuttering? I have rlly bad stuttery fps, it get around 400fps in fortnite 200fps in cod, but it drop to like 25 sometimes.
Would be nice if the Lian-Li fans were actualy white. I bought 6 of the SL V2's for my all white build and well they look kinda grey compared to the other parts.
![Yin Yang HYTE Y70 Touch PC Build [RTX 4070 super | Ryzen 5 7600X]](http://i.ytimg.com/vi/inUTapQMOfU/mqdefault.jpg)
![Yin Yang HYTE Y70 Touch PC Build [RTX 4070 super | Ryzen 5 7600X]](/img/tr.png)
Hey guys! Thank you so much for stopping by and watching the video! Give it a like rating if you enjoyed and drop me a comment. I absolutely love how this build came out, especially with all of the custom wrapped cables inside the PC! @hytebrand was nice enough to send me out their new Y70 (Non-touch) PC case and @superflower sent out their Leadex Vii 1000w PSU in white for the build.
Everything included in the build is listed below, including what I used for the cable wraps:
PC:
Case: amzn.to/3JodHVt
CPU: amzn.to/3J5ig7f
GPU: amzn.to/3PS9Aoh
Motherboard: amzn.to/49rUj4z
PSU: www.newegg.com/super-flower-l...
CPU Cooler: amzn.to/3U6UJZE
Storage: amzn.to/3TNg3Cc
RAM: amzn.to/3UbmsZy
Fans (Side and bottom): amzn.to/3W7rPdF (x6)
Fans (Top): amzn.to/3U6TDx3
Fan (Rear): amzn.to/4aC0nJm
Cable Wrap (Outer): amzn.to/4ao188t
- 1 pack should be enough for all cables but I would probably do 2.
Cable Wrap (Inner): amzn.to/3VVWXfI
- Get 1/4", 1/2", and 3/4" for different size cables.
- 1/4" was used for smaller cables like front panel connectors, fan, and AIO cables. 10ft is probably OK but I did 25ft, and had some extra.
- 1/2" was used for all PSU cables and AIO tubes. I also did 25ft of this but had extra.
-3/4" was only used for the SATA PSU cable. I didn't use very much of this and 10ft was fine.
You will also need a pair of scissors to cut wrap to length, and a lighter for the inner wrap, to prevent fraying on the inner cable once it is cut. I also used some white electrical tape.
Thanks for your support,
Danny
Pc build looks great can you get Hyte y70 non touch in black because my setup is black and i already have the black y60 and the y70 non touch is so much nicer
@@AussieVR27 Yes, the Y70 non touch is also available in black as well: amzn.to/3QaI3yO
@@DanKamYouKnow oh thank you so much
The build is amazing
My next build will be white. With hard tubes, 'cause I sway that way. Look forward to more vids.
Can we just appreciate the facr that he the extra effort to have his own custom figurine make with his face on it and made it look even better?
😎😎😎😎😎😎😎😎
I wanna edit and fix the grammatical mistakes I looked over so badly that I don't get the "AcShAuLLy 🤓". But don't wanna lose the heart at the same time
@@Gamcoasterbro I read this comment, finished the video, saw Kratos, giggled and came back to like this comment, re-read it again while doing so, and all these times I never noticed the mistake until I read THIS comment of yours. No need to change the errors friend, our human monkey brains fill in the gaps for us :)
But isn’t it Kratos
@@DanKamYouKnow How is the pc holding up till now? Does this combo of the 7950x3d paired with the 4080 run cool? I'm about to build a similar setup but only difference is I'll be using the 7800X3D.
This man has the best relaxing voice lol. He gives the "everything will be alright" vibe
I appreciate that!
Right?!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I love the ingenuity, especially behind the fan controller placement, absolute genius!
Thank you! The fan controller placement was totally last minute too, I had planned for another location but it didn't work out.
Man is literally the Bob Ross of PC builds
I miss when all PC channels were like this. Now it's just a bunch of millionaires pushing sponsors. This channel makes me super happy.
I have never seen such a clean cable management! These cable wrappers are a big hacks!
Also the nice music and calming voice, super well done video!
Loving your PC build shorts. Posting here to say TY for the lols and the excellent builds. :)
Gotta love the y70 case. Such an awesome case to build in. Ive got a open loop setup in a red y70 and i love it!
My mom watches your channel, we are building a pc soon. Thank you for all your videos and thank your mom for making you in the first place! (also the videos are extremely satisfying)
Yoooo that cable management is almost as clean as that beard bro 😎 👊
Thank you! 😎🤝😎
Best PC master race channel on YT , love it ! I just built basically the same white rig with a 4090 and 7800x3d but went with the icue h150 link system. Loving it. I wasn’t going to build but I’ve been watching all your videos lately after finding you on YT and you inspired me lol. I upgraded from my aging 2019 build with a 9700k/2080. I need those cable wraps now darnit !!
I’m so glad I found this video cause I was gonna do the 3 120mm fans on bottom and side and a 140mm on the back and 3 120mm on my AIO and wasn’t sure how to run the intake and exhaust!! Now I do!! THANK YOU!! You’re the absolute best when it comes to gaming PC’s!!
came from tiktok! absolutely beautiful build man. i bet you're super proud.
Yes I am! Thank you so much!!!!
9:21 "'white power' supply" whoops! But seriously, impressive build, I'm ordering the wraps to mimic this on my own because I really like the clean cable management. My y70 is a mess in the back right now.
Cable wrapping as smooth as the head 😎
Brruuuhhhhh
I have to admit that this build looks smooth and it has a space station vibe I would love to see the build perform with high gaming and fresh rate gameplay? I love your calming PC videos. Thanks Dan
im super proud of the inside of my pc, just did my first major upgrade not long ago. but the back side is a rats nest of wires. i needed this video lol
I’m in love! Action Figure enhancement, white clean look. Amazing cable management! I bought a Clx PreBuilt because I have much to learn before feeling safe to build. You’re videos are funny!
Im so excited to build in this case. thank you very much for this guide.
This is a fantastic build and it convinced me to go for this type of build, thank you so much! That cable trick is awesome :)
Thank you for this. I bought this case as well and will be building in it. I love the cable management.
oh my god i follow u on tiktok and i stumbled upon ur yt channel 😭 im actually completely new to pc builds and such but im getting the hyte y70 touch and this already boosted my excitement for when it arrives
when the back looked that good you know you have perfect cable management and take you time to make sure it ends up like that
this video was so good I just built my pc(well I haven't finished it) because all your videos have helped me and inspired me to build my own instead of buying a pre built
ur room is SOOO cool i love the aestetic and i love the build ur living the dream man! congrats♥
Thank you! Really appreciate you saying that.
now here's a unique and cool way to do some cable management without spending a fortune on custom cables :D (even though the build itself costs about a fortune and a half) great job and awesome build!
Build came out great! Love the space station vibe and the green light really pops.
Thank you!! 😊
Mark!!!! Suuuuuuuuuuuuuuuuuu!!!
@@DanKamYouKnow what up homie?! Oh, you know!!!
I'm following you since a month and I recently took a new pc case to change my old pc case. I tried to do two days, and it took all day, but I couldn't. Then I gave up, and I bring my computer to the mechanic. Now it is all good.
Now I watched your video, and I'm laughing my luck because the video released after I finished my pc case
Dude...absolutely loving the dad energy!
Dan over here living my dream with the all white build. Looks fantastic my guy!!
That is CLEAN! And maybe it's just me,but it also looked like putting in that little bit of extra effort with the cables in the beginning made other tasks during the build easier to do when the time came. Very nicely done!
This appeased every ounce of my OCD for wires. Cables, spreading thermal paste...and the black fan controller on H for contrast, matching low tone LED! 💯 on everything! If cables allowed, I'd have that on a constantly rotating platter 😍 but then I would get nothing else done because I'd stare at it all day 😅
Appreciate it! It was a really fun build to do!
This man should get more views and subs lo your content❤
First time I’ll be building my own PC and I chose the Hyte Y70 for the open concept to display figures and such. This video is informative, methodical, and is very pleasing to see really nice cable management
Build:
-Ryzen 7 7800X3D
-Gigabyte Gaming OC 4070Ti Super
-MAG A750GL PCIE5 MSI PSU
-MSI Tomahawk B650 mobo
-2TB Samsung 990pro SSD
-32GB Ram DDR5 Vengeance 6000
-Arctic Liquid Freezer III (swapping fans for Lian Li Uni for the top, repurposing the fans for bottom intake)
-x6 120mm Lian Li Uni fans (3 for vertical intake and 3 for swapping on the AIO top exhaust)
-1x 140mm for Rear Exhaust
-*** Repurposing the 3 Arctic fans that came with the AIO as the bottom intake fans
-Hyte Y70
-***I also purchased the cable recommendations too, thank you for providing that info!
Will be gaming on a TUF Gaming 27" 4k 144hz Monitor too!
Love you content and how smooth you are with it man, keep up the hard work!
showing techtubers how it should be done, good job :) love the non biased theme, never go full biased and you will grow to millions soon
bro is the master of cable management
I love ur content this is just amazing ❤
Such a beautiful build sir, love it! Been watching your videos for inspiration and finally building my own, so thank you!
I tried following all of the fan cable connections but lost track of the rear exhaust cable. Is that plugged into the motherboard? And then the 3 other sets (top/bottom/side) are plugged into the controller? Stay blessed sir! ❤
This is great cable management. I’m building a new rig and will definitely be using this technique. Thanks my man
good build, its great to see hardware enjoyers becoming "famous" you deserve it its the best thing when you are send and can buy a bunch of hardware, i love hardware but i dont have a lot of money so i'm happy when i see a guy that really likes it and have the chance to test out a lot of things
Looking amazing man! Enjoy it
thats amazing clean and the mummy description was a perfect way to describe it!
That case is really cool lookin, like a fish tank and I love those custom wrapped cables
Holy! An 11 minute skit! I'm down😊
😎😎😎😎
Great video I can't wait to build my new PC in this case.
Came from instagram , i like your content keep it going mahnn YOU ROCK !!💜✨
Thank you so much!! Appreciate the support across platforms!
$1500 GPU and the most impressive piece of this build is the extra $30 invested into cable management. Bravo man, that's super clean. Definitely gonna try this out on my next build. 👌
Thanks a ton!
i actually want to build a pc but i have no idea where should i start i've used only laptops so far so thats going to be the first setup i build. i have some budget and i would really
appreciate your reccomendations
Cable wrapping is smooth as his Head and Voice✨Good Job, Keep it up...
Mate , this cable management idea is great, this is the next step for my computer after I purchase these cable accessories, thanks .
No problem 👍 Thought it would be cool to experiment!!
Fantastic
A lot of products don't ship to Korea, That's a shame.
Thanks for the great video
That's really a clean build, I love the idea floating storage sleds that can easily to remove. Very convenient to change driver
Man I am a big fan of you and watching your content for a long time. good to see you build a new Pc. Can I get a heart ? please I am just 17 years old !!
Thanks for the support! ❤️
Absolutely beautiful creation!
I WAS planning on upgrading to a 3090 and doing a case swap to a black h9 flow but this build inspired me so much i think im gonna go with a y70 and try your cool cable wraps!
Anyways love the build 🔥🔥
Thanks! Can’t go wrong with the H9 or the Y70! My last build was the H9 Flow and I loved it. Although similar, both cases are so different. Good luck with yours!
I really love your videos and the way your talk, its soo chill.♥
Thank you so much!!
Gorgeous and the case looks nice as well :P
I thought the fans on top are the same as the CPU cooler, but there's a link for the CPU fans and the "top" fans, are there two sets of fans up there?
Chillest Man on UA-cam. Great videos btw
Appreciate it!
I'm sure it's gonna be a great video!
Thanks!!!
was waiting for another video like this forever....love it ❤
Thanks! My full time job makes it difficult to do as much content creation as I would like!
@@DanKamYouKnow whatever it is man , we are always with you !
Thank you for sharing your cable management. It gave me some new ideas for running my cables.
Nice one looks awesome funny I just comment on another video about how annoying cable management is and then I found this video great idea 😁
😎😎😎😎
The Y70 really is such a gorgeous case
Amazing! I just made my first computer build (white) this week and was watching your videos and saw how good the custom cable management was but didn't know how you did it!!
Thank you!!
white builds always look great IMO, i just have yet to do one. Looks great BTW. Keep the videos coming!
I wanna do a pc building now because of you!! Ty for your videos and that unforgettable chill vibe
Had to come and watch! Thanks for all the great content Dan!
Thanks for watching!
@@DanKamYouKnow of course!
that i have to go to the bathroom ad cut was so smooth. Instant sub.
❤️❤️❤️
Cable management to perfection 😮👍🏽
This is so helpful, I’m gonna save this video because I have a white build but my pcie cables are black and it will help keep with the white build and organize my cables
That’s a really unique way to cable manage, incredible build I must say!
Appreciate it!!!
In my case, I do not recommend using electrical tape because over time it becomes sticky. It might be better to use some thermal insulation for cables and with a heat gun or even a lighter, make it shrink to fit the size of the cables. Btw. Nice video I love your shorts 😎
I love your channel, you speak so clearly that I can understand easily, I'm Brazilian btw...
🤝🤝🤝🤝
Hey Dan can you pls tell me where u got those wrap from? And the size 😁
They are all linked in the pinned comment and description.
planning a hyte build, my first build. this helped me a lot thank you.
will be doing this cable sleeving with a spiral wrap, looks very neat
I want to wrap my cables like that now, great video!
Go for it!
Extremely clean build ! Nice job
thats lv 99999 Cable managment i ve seen so far !
Hey Dan, I was inspired by your build and planning on building a pc similar to this, I am using the exact same case, aio, and fans but, I am a bit confused on the aio cooler and replacing its fans with the SL V2. I see on the video you had two wires from each side of the fans on the aio. Would you mind explaining to me what cables you used? Also, I was going to plan on using the fans that came with the cooler but putting it in the bottom to cut costs of buying more fans. But, after looking at the manuals, I am getting more confused and wondering if it is even possible?
I have the y70 touch (Not a Flex Just Don't Know If The Back Of The Case Is The Same Or Similar) and was wondering with the power supply, since it is mounted vertically should the fan be facing the back of the case where the meshed design is or towards the motherboard where it is just flat and solid, don't want to risk making a mistake and the power supply overheating???
I literally just finished my Y70 WC build and now I have to cut off all my stupid zip ties and wrap all my cables because this looks amazing. Also, I ordered a Luke Skywalker action figure too. 😝 Clean build man. Very clean.
Congrats on your new build! I think I’m going to add a Moon Knight figure to mine, someone said it reminds them of Moon Knight and it totally does!
I love your videos and different personalities 😂😂😂
wow, that cleanest and most beautiful build i`ve ever seen, greetings from ukraine!)
I just realized.. You and Kratos look like 😮❤️🔥 from God of War. 😢 Thank you for step by step video (edit) you did put a GOD OF WAR FIGURE AT THE END 😭😭❤️🔥✊🏼
I didn't think I would like those wraps, I was wrong! Nice job sir! =)
Do you have a video on your channel for first time users making their computer ready for gaming? Like all the stuff you gotta do such as turn off mouse accel and disable background apps and other stuff I keep forgetting?🥺
I like how wide the case is. I wonder if that helps with temp cooling.
Cooling is fantastic with this build! They made a lot of improvements over the Y60 with this new Y70
what a beautiful build mate, for a bit I though you were cheating just before you unscrewed the drive caddy :D absolutely love it!
Mega 🤩 Looks really great
Thank you 😋
clean man, so clean
I try, thank you!
Can you benchmark God Of War?
Love your vids bro keep it up!!
Looks amazing. Great job with the build
I know you from shorts but I also saw that you're not posting longer videos so I watched your old stuff.
Glad that you make a comeback.
Thanks! I used to post straight forward tutorials and reviews, but then started doing my skit style short form content, and was really focused on that. Now I’m trying to blend a good mix of both when I have time!
love it.... very clean setup indeed.. ❤❤❤
Wow, that feels clean, whatever i buy a pc case and the components, i would love to manage the cables more in the back of the pc case so it won't become a pile of something that gets the component in it's way.
Hey dan, i need help with my pc, i need to know how much my pc in cad, its specs are 128 gigs of ram EVGA founders edition 1080ti, Intel xeon E5 2699 v4 cpu and 9 tb storage
You could change the gpu u could get the 4060 or 4070 depending on your budget and for the cpu i will take the i5 13600k
And need 32 gigs of ram
@@krispydreams6262 alr, so would 32bg of ram fix my stuttering? I have rlly bad stuttery fps, it get around 400fps in fortnite 200fps in cod, but it drop to like 25 sometimes.
Would be nice if the Lian-Li fans were actualy white. I bought 6 of the SL V2's for my all white build and well they look kinda grey compared to the other parts.