Lian Li - SL Infinity [L-Connect 3]
Вставка
- Опубліковано 28 чер 2024
- I have one word for this newly release SL Infinity 120. "WOW" and I will like to share my experience with you.
Download L-Connet 3 app to controll these SL Infinity lian-li.com/l-connect3/
Info on SL Infinity 120 lian-li.com/product/uni-fan-s...
Credits and with thanks!
===================
- Lian Li for providing these SL Infinity 120
- BlkSoda who did all the coordination and to ship them.
Timestamp
=========
00:00 | Intro
00:44 | Detailed specification
01:12 | Unboxing & accessories (Individual Pack)
01:53 | Unboxing & accessories (3 Set Pack)
02:36 | In-depth intro & the controller (3 Set Pack)
05:55 | Info about the splitter
07:02 | Dos and Dont's on using the splitter
07:55 | In-depth info on Fan & aRGB cables provided
10:32 | The specification and safety operating guidelines
13:56 | Mouning on radiator & cable management tips & tricks
16:29 | aRGB effects on SL Infinity fans
17:30 | Introduction of the L-Connect 3 application
17:54 | Illustration of the L-Connect application
21:31 | Build-In Issue submission interface
23:35 | Updates and end credits
SG Gaming Community
=====================
Casual streamer having fun with friends. Building a community to have fun together! Join us in our daily epic nonsense!
UA-cam - / @kritikalgaming9331
Facebook - / kritikalgaming93 - Наука та технологія
![Lian Li ARGB Products (How to make it work?) [L-Connect 3]](http://i.ytimg.com/vi/CgvuUFeff8U/mqdefault.jpg)
![Lian Li ARGB Products (How to make it work?) [L-Connect 3]](/img/tr.png)
If anyone of you have the issues with L-Connect 3 app, below are some troubleshooting steps
Basic Troubleshooting steps
Disclaimer : Though the chances are very low to brick firmware updates on motherboard and to any controllers. I will not be responsible if you have brick your motherboard or controller.
1) Make sure your motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there are, kindly update those bios firmware version.
2) Make sure your chipset driver for your motherboard is up to date! For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html
3) Remove all argb apps (Asus Armory Crate / MSI Dragon Center / Giga Fusion / Asrock Polychrome). If the brands which I have mentioned, do have a uninstall tool like the Asus Armory Crate, use that, else use Revo uninstaller ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller ua-cam.com/video/uMgUYiakpxM/v-deo.html
4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second
5) While waiting, please do not use KVM switches. Disconnect all devices that are connected to your motherboard (front / back IO). Leave only your Keyboard, Mouse , Monitor and Ethernet (If you have) connected directly to your motherboard.
If your monitor has a KVM build-in, remove the USB cable from your monitor to your motherboard USB socket. If your mouse and keyboard are connected to your monitor, please remove them and plug them directly to your motherboard instead.
6) Plug only one Uni controller or Strimer Plus V2 controller. If its for Uni Fan (SL/AL) use only 3 fans to an output of the uni controller.
7) Plug the power cable and turn on your PC
8) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni / strimer plus V2 controller.
9) Install the L-Connect 3 app only lian-li.com/l-connect3/ (current version 1.3.16)
10) After installation, run L-Connect 3, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON.
11) Reboot your system.
12) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed.
13) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 14) and proceed step 16)
14) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again.
15) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses)
16) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file.
Eventually LL will get over these teething problems but they need to do it quickly, they're making such great products but these sort of problems scare off buyers that are not power users. After having to update my firmware for L2 for my no-mark SL controller with Ene ISP Tool, I was impressed that L3 updated straight to the latest firmware rather than having to manually flash the controller like before avoiding alot of the risk of bricking it but it really should've been implemented that way earlier. I already know a friend who has put LL in the "too hard" basket and gone back to Corsair which is a shame because theres likely alot of other users out there like that but its great to see them slowly getting it together.
@@xZephYx Hello and welcome back. I partially agree with you. Not everyone is tech savy, in that case, it would be best to engage a SI to do the build. If wanting to build a PC, these are the challenges, not everything is perfect. I did have a fair share or problems but had it narrow down and resolved it. going through the pain with Lian Li tech support via email. nevertheless I got my issues fix. Now as what you have mentioned, I totally agree with you. Maybe should release beta testing on the L-Connect 3 to the public, instead of just 30 person. As you can't be sure those 30 person will give feedbacks or providing issues, globally it does. This will help consolidate the errors and to prepare a better application before releasing it.
Hi Kleo i have with my new Uni Fans Sl 120 Rattling noise brand new i Return the fans to the seller. Have you that Problem often or its that a rare case that brand new lian li fans a defective. So i have now L-connect 3 and all my old Sl 120 fans quiet mode. Butt Pvm Funtion its not here by now. thank you
@@Patrick-pv4ud Hello welcome to my chanel, be it SL , AL or SL inf fans, I do not have this issue. I believe is a rare case. all is needed is a replacement, since it's under warranty.
as for the PWM on L-Connect 3. make sure the application of L-Connect 3 is reading your CPU or GPU temperature. else it will not work.
@@KleoYan yes it read cpu yeah i get a replacement. But its rare but impossible that brand new fans a defective. Can you make a video when you have a solution or rattle fan noise thanks best regards Kleo
Oh man, just watched a couple of your videos obout Lian Li products and I must thank you for the in depth explanations. It's so helpful, thank you so much for making these!
Hello ObscenePizza, welcome to my channel and you are most welcome.
Since I just want to put together a new case and a new fan setup based on Lian Li, I am very grateful for your videos.
Hello Morganatic Chaos, welcome to my channel and you are most welcome.. all the best with your new build too. 👍
I have stop commenting but truly enjoyed every single video you have created. You always place us "the user/PC bulider" as your priority. That's what I like about you. I have watched other videos on these fans, but none talk about the safety operation. On top of it every single details you've mentioned is what we wanted to know. Thank you Kleo. You are pitch perfect.
Hi Nox, I am glad you are still supporting me. how are you my friend? By the way am flattered. Thank you for the compliment and I am still trying to perfect my video taking. it still looks horrible compared to other UA-camrs.
@@KleoYan oh really, I didn't notice that as I care is your content details. That is more important. Keep up the good work Kleo 👍
@@noxmu4715 thank you as always 😊
Finally someone made a detailed video about these fans and the differences between the single and the 3 pack. Thank You.
Hi Rui Sousa, welcome to my channel. If you need other Lian Li ARGB eco system. You can always refer to this playlist, just need to take note of the sub title which has [L-Connect-3] which is the current application ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html&si=S_hODBlqF98Girtm
Great job explaining it. Glad Lian Li helping you make this videos.
Hi Conicrick66, welcome back and thank you for the support. yup all thanks to them, infact without them, I would not have done so much content about these uni fans ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html 😉
Great video, very informative as always!
Hi Emil -, welcome back and thank you for your valuable feedback.
Thank you so much. I am just about to purchase these amazing fans for my build and you have sealed the deal. New sub from me.. So easy to follow and understand. Thank you.
Hi X-CON-X, welcome to my channel, if you run into issues, there is another video that goes in-depth on how the L-Connect works ua-cam.com/video/CgvuUFeff8U/v-deo.html, all the very best with your build too and thank you to have visit.
These look insane!
Hi SanteeNL, welcome to my channel. Yes they are insanely good hahha. Far more better as compared to the AL and SL, in terms of it’s flexibility on cable connections and functions. These fans are well engineered which I appreciate most.
very informative mate. now im gonna order this fan. and max out every cable 4 fans. thanks man.
Hello Dexter Gilapay, welcome to my channel and Happy New Year. Am glad you like my content. If you ever run into issues you can watch this vid too ua-cam.com/video/CgvuUFeff8U/v-deo.html
very illustrative. good job
Hi David sun, thank you for the feedback. You might want to watch the series which have the subtitle [L-Connect-3] ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html
Thank you for taking the time to do this. I like Lian LI products. Since 2020, i bought: The 011 dynamic XL, 2 days ago i changed to the o11 dynamic evo. I own 10 SL Uni 120mm fans, 2 140 uni fans, galahad aio, 6 sl infinity fans. I'm a tad disappointed with the EVO 011, motherboard stand off didn't align with an E-ATX Z790 gigabyte master mounting holes by a tad. i had to push the edge of mainboard to align and the opening for the cpu back plate is not fully open. Meaning if you change a cpu cooler the main board has to come out.
Hello birdsoup777, welcome back. So sorry to hear the minor mishaps and thank you for the feedback. This is good piece of info you've shared. Hopefully it will help someone having the same issue as yours.
Thanks for a good in depth review of the infinity fans. Going to buy 3, 3pk and a single fan very soon so that i can put 10 fans in total in my new Lian Li O11D EVO 😍👍
hello IX GOODSPORT XI, welcome to my channel, if you are new to these uni fans and to save all the trouble to troubleshoot. btw am not saying they are difficult to install as majority of them just hurry to install or to plug these fans and they have issues which were fix by some of my troubleshooting guide. Before you plug and install, it will be good if you can watch this video and I hope it will help you out too. ua-cam.com/video/CgvuUFeff8U/v-deo.html .. thank you to have visit and to leave your valuable feedback. All the very best with your build 😉
Thanks for the video. Since this is the first one I believe 2.0 version would be amazing. Even I didn’t like the SL series. As soon as the AL series released I got it. Anyway LianLi took it to the next level, fans casings rgb cables. 👌👌👌
Hello Heran Buddhika, welcome back and yup Lian Li did took sometime to refine this product but there are some whom might not like these fans too but I guess is up to individual preferences. Thank you my friend for visiting and to leave your valuable feedback 😉
@@KleoYan BTW do you know any good place to buy Lian Li products in Singapore? I recently moved to Singapore
@@heraNbUdDHikA hi you change either shop at Sim Lim Square and to compare prices on pc part, or hop on to online platform like shopee or Lazada (please check on the credibly of the online shops before purchasing and make sure is of a reputable Singapore shop).
Thank you, for the longest time my fans been running on default.
Hello Luong Time, welcome to my channel. I am glad you like this content and thank you for your feedback. 😉
@@KleoYan To your point at 7:30, I have 5 fans therefore i am assuming it will need to connect to another port on the controller?
@@luongtime5364yes it is best to have only 4 fans max to a port.
Very beautiful !
Hello Dimitrios laokeim, welcome to my channel and yup, they are indeed beautiful to look at. A combination of both SL and AL. 😉
You got a new subscriber, coz the way you explain is top notch i was actually looking for a video on how to install these fans and found this very helpful.
Would actually love if you can also show step by step connecting methods untill to make fan perform and I found that part is missing.
Hi ABHIJIT PN, welcome to my channel and thank you for your valuable feedback,. this playlist might aid you. ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html&si=VezmbuMTkYJFLyiS
very good explanations keep the good work ;)
Hi IPJR S, welcome back and thank you for your valuable feedback .
Fantastic! May have to sell my AL'S now but will wait till your air flow comparison first hehe.
Nice one!!
Hello Tremor flow, welcome back again and oh no. These fans have attracted you 😱 but it’s of a good cause. They are very well build and with lots of features. Will need to test out their airflow with another video. 😬
I got my infinity's today and I can tell u they move even more air and are quieter than the SL and Al fans
The infinitys are awesome
@@JJ-gk5tn nice. Thanks for the feedback buddy 👍
What a beauty
Hi Vincent welcome to my channel and yup they are beautiful. 😬
Awesome video, Kleo - answered almost all my questions!
1) when you use the 7-pin splitter to add a back fan to the channel as three others, does the controller recognize it as a 4th fan, or is it basically treated as a "duplicate" (e.g. for something like Runway Sync)? If the former, that's a huge win. If the latter, it's a missed opportunity.
2) have you tested out any software to control the fans, either with the controller or from the ARGB header directly (like signalRGB or OpenRGB)? If so, do you have a recommendation on ones that work?
3) how many LEDs total on each fan?
Overall, I think these fans look absolutely beautiful. It is unfortunate that the new connector is proprietary and doesn't allow one to use the controller for RGB and the mobo for direct fan control. Perhaps a new accessory cable pack is planned (who knows?!). Also, it's unfortunate the white fans still ship with cables with black wire and sleeves (for those with white builds). It's small things like this that can turn the dial to 11, but I guess that's something easily remedied with some white braided loom (if you can find it) and white electrical tape.
HI LJR, welcome to my channel, let me try to answer most of your questions.
Q1) when you use the 7-pin splitter to add a back fan to the channel as three others, does the controller recognize it as a 4th fan, or is it basically treated as a "duplicate" (e.g. for something like Runway Sync)? If the former, that's a huge win. If the latter, it's a missed opportunity.
A1) nope it will recognizes your rear fan as individual. therefore it breaks the rgb flow.
Q2) have you tested out any software to control the fans, either with the controller or from the ARGB header directly (like signalRGB or OpenRGB)? If so, do you have a recommendation on ones that work?
I have not tested with other application but I heard they are good. You can give it a try, and if you are connecting it directly to your motherboard, do make sure to check the ampere specification of your motherboard and to do the calculations on how many fans can you daisy chain.
3) how many LEDs total on each fan?
Based on the Media Kit provided by Lian Li for my open view. Each SL Infinity 120 features a total of 40 fully addressable LEDs for maximum brightness.
Kindly note that if you get an individual pack, it has the cable for connecting it directly to your motherboard argb and fan header. I have spoken of it in this video. Hope all these answer to your questions and all the best with your build.
They look B E A utiful
Hello Haies, welcome to my channel and indeed these inf fans are beautiful😉
The white one 😍
Hi ya, I guess is up to personal preference. I myself like the black ones as the effect pops out better.
Thank you for the very comprehensive video! at 5:40 you mention switching to motherboard mode. At that point, can we uninstall L-Connect? Does the "use the motherboard mode" setting persist across shutdowns/reboots or does it need to be set every single boot? Thanks!
Hi Tz2001, welcome to my channel as these uni fan heavily depends on their uni controller, you can't just switch and uninstall the L-Connect 3 app. so sorry about this.
my EVGA z490 dark all mobo fan are 2 amps. I like that quality was not overlook.
Sonicrick66, welcome back. yup I do agree that EVGA are good motherboards, no doubt about it, but if you are to use the controller and not directly connected to your motherboard argb, that will not be an issue. As the power drawn for the argb are directly from the controller. Unless you got individual package that does not have the controller, then will need to take note of the ampere load, provided on your motherboard argb header.
@@KleoYan I will be using Lian Li controller better. it does not interfere with my mobo at all so is good.
@@Uglylizard66 am gald everything work out fine for you. 👍
So, I suppose if I bring the 3 fan pack may I install 2 on the side of chassis and 1 in the back with no issues? Or shall I bring 3 packs of 1 fan?
Hello Math, welcome to my channel. It greatly depends on you. Both will work, the only difference is, with a 3 pack set, you have the controller which make use of L-Connect 3 app. If individual, you will need to hook those fans to your motherboard and to control by your motherboard argb app.
10:40 Thanks for the warnings. We would not think about these things.
I do love the infinity fans, but they need to be used in the right place. For me the AL fans are better, stylish, discreet, yet still there. The only issue I have with the L-connect software, and the only reason I still use the MSI mobo controls is that there is no temperature setting for the lighting effects. I use the lights as a discreet warning system if my CPU gets too warm. So Green is cool... yellow is warm and red is Hot. It would be great if Lian Li added this functionality to an otherwise superb product.
Hi Julie, welcome back and thanks for your valuble feedback and you do have a point there. it will be nice if they do have the feature on the LEDs that act accordingly to the CPU temperature.
The load current is one thing but generally a machanical devices will also have a startup current. Thiis ka always higher then max operating current. So please factor that in.
Hello Down Under Garage, welcome to my channel. Thank you for your feedback, Do pardon me as I have no clue of what you have mentioned, do you mind to pass your valuable feedback to the actual Lian Li tech support here? lian-li.com/faq/ . Once again, thank you to have vist and pardon me of the ignorance.
Another insightful video my friend. The controller that comes with the 3 fans is a proprietary connection? I'm still not sure what to get. These Lian Li SL Infinity fans or the Light Wings. Any chance of a comparison on performance and noise especially? PS It seems that Lian Li has a lot of hartdware/software issues.
Hello Be Mindful, if you get the single pack, you can use them directly to your motherboard fan and argb header, the only issue is, you need to get splitters for both. Also you have to be careful on the limits as try not to connect 4 fans to the a fan header or argb header to the motherboard. As for the Light wing fans. Let me see what I can do to do the comparison and to do the airflow test. As for the L-Connect 3 issues. I have pin up a comment for some basic troubleshooting guide to fix it. Hopefully this will help majority of the people having this issue.
@@KleoYan The aim is to buy 3x triple packs and maybe one single pack for the rear side as exhaust, so the controllers will come in handy. And like you explained, one 4 fans are ok to use as a chain. Checked the websites of several vendors, they're not yet visible to pre-order, need to wait for that.
@@bemindful924 yup that’s correct 👍all the best in your build😉
Very nice video ✌🏻 I bought the same set on white but dosent have that controller :/ just a regular 4 port controller and I can't plug my Galahad and the leds of the EVO case
Hello Eduardo Bologna. If your controller does not have the sync 2 and sync 4 port. That is the older version which are the SL120.
Hi, I just found your channeel and its very helpful. I bought a LIan Li Galahad with SL120 Unifans and aslo bought 2x 3 pack of SL Unifan infinity. Can I connect the SL120 Unifan to the same controller as the unifan infinity or do I need to use the other controller?
hello lolo lolaso, welcome to my channel and thank you for the feedback. unfortunately no, as each uni fan argb effect paterns depend on their individual controller which I've explained here. ua-cam.com/video/CgvuUFeff8U/v-deo.html. Once again thank you to have visit and to leave your valuable feedback. All the best with your build.
very nice
Hi JB Villegas, welcome to my channel. They are not only nice but super functional.
I’m wondering if you can use this controller provided in the 3 pack infinity fans with the strimer plus v2
hi, welcome back, if it's strimer plus v1, yes you can.. but for strimer plus V2, you can too but it defeat the purpose as the L-Connect 3 app has more argb effects to play with, thats why the Strimer Plus V2 has a new controller that enable you to plug the USB cable between the controller to your motherboard. example here of the Strimer Plus V2 ua-cam.com/video/uWNZO2HVgxE/v-deo.html
hi! it's possible to by-pass just the RPM of the fans (and let the motherboard to manage it), and manage the RGB functions with the L-connect? thanxs
Hi Sebastian Alejandro, welcome to my channel. by default, it's not possible even if you get a single pack where you have the 4pin PWM cables as your argb, you will need a coverter to plug to the inf controller / hub (which is 7 pin connector). It will only be possible if you mod your cables.
Do you have a video about the infinity fans and the uni infinity hub in combo with the strimer v2 cables/hub ? How do you let everything work ? I have bought 10 infinity fans 1 3 3 3 setup and 24pin strimerv2 and 3x8 strimer v2 ! how do i get the best set up ?
Hello Benny Thomas, welcome to my channel, maybe this might help you ua-cam.com/video/CgvuUFeff8U/v-deo.html
Yo kleo I totally forgot to ask
What are the spare foils for Wich are in the package ??
Hello J J, those are for you to tape at both sides of the fans to protect from scratches.
Hi Kleo. Love how in depth your videos are! I plan on getting the SL Infinity fans. I want to connect the fans on my AIO radiator. I will be purchasing 3x single pack SL INF 120mm fans and 1x 3 pack SL INF 120mm. For the fans on the AIO radiator, I will connect the PWM to the CPU_Fan header on the motherboard. But I want my RGB to be controlled by the controller/L-connect. I read that you can plug the ARGB cable into sync 2 or sync 4 ports on the controller. But you will need the Lian Li ARGB cable kit to convert the ARGB cable so that it can plug in the sync 2 or sync 4 ports. Can you confirm this is correct?
Hello Tony Tran, welcome to my channel. If you are using the SL inf 120 single
Pack, you don’t have to get the lian li argb kit. You can plug to sync 2 or 4 without issues.
@@KleoYan Strange. I was reading online that the ARGB cable that the single pack comes with won't plug into the sync 2 and sync 4 so you need the ARGB kit to convert it. Lian Li also just confirmed this as well.
@@bigdoublet Hi Pardon me.. my bad. I got mixed up. yes you will need the argb kit.. so sorry.
Not sure if you have done this before or have interest in the topic but will you review the different m2 ssd heatsinks sometime in the future? I bought the msi z690 force recently and found the temperature of the SSD much higher than when I was using the x570 system. Not sure if a 3rd party heatsink will help.
Hi Yaoz, based on experience. So long your m.2 does not hit 55 degrees. You should be fine if it’s above 58 to 60. Then you should be worrying. Btw which gen m.2 are you using? For me I just use the amour plate that comes with my ASRock x570 taichi board. There are also other factors that might cause heat. Case airflow is one of them.
I'm using the gen 4 SSD (WD SN770). I think the controller goes as high as 67C based on the hwinfo64 readings and it is not even my main drive (currently it's below my GPU). The firecuda 530 (my main drive) under load is still below 60 (above GPU m2 ssd slot). Not sure of the reason as I currently have 3 140mm intakes running at 1k rpm on a phanteks p500a case.🤔
@@Mew77778 hi ok now I see what’s the issue. I use to have this issue when my rtx 3080 is right above my 2nd m.2 slot in a lancool II case. Then I place two fans at the bottom of the case and it improves. You see when you are gaming or so. Your gpu will generate heat and the heat from the bottom hits the motherboard armour plate. Therefore causing heat to accumulate. Try to see if you can place two 120mm fans or to vertically mount your gpu. That will help.
Out of curiosity, do you have the ability to control the sides and the blades individually with motherboard control? Say if I wanted to turn the RGB off on the blades while leaving the sides on?
Hello Shinsej Taizen, welcome to my channel, unless your motherboard argb program have that function, else will not be able to. The uni fan family will work with the controller as there are specific burn in chip to follow the instructions from the L-Connect 3 application.
Nice video. Please where can I find the new cable that allows to plugg the AL120 fans to an Octo aqua-computer controller ? I have issues with the Lian-li Connnect-3 .. I prefert the aquacomputer software.. thanks 😊
Hi redady, welcome to my channel. Let me see what I can find out about your controller and allow me to get back to you later. I am off to bed as it’s my bed time 12:30am here. Will talk to you later. Once again thank you to have visit.
@@KleoYan thank you for your quick response. ua-cam.com/video/ZDlMYwuWZCc/v-deo.html
shop.aquacomputer.de/product_info.php?products_id=3832
there is also the Farbwerk 360 controller, it is good but it does not manage the speed of the fans.. it is made for A-RGB..
shop.aquacomputer.de/product_info.php?products_id=3798
@@redady4855 Thanks for the info, I have gone through your controllers. those controllers be it fan or argb, you can't daisy chain, even if you find a converter ( you can get this converters and select green www.ebay.com/itm/255209413090 ) . I don't think is a good idea to use AL on your controllers with them daisy chain. If you want to take the risk then go ahead. cos the load is at 8A and I am unsure how this 8A is distributed to each port.
Hi Kleo, check with you, if I am using Lancool ii Mesh case, do i connect the case stock fans to the SL Infinity Controller or Direct to the motherboard instead? Apologies if this question have been asked previously, thanks!!
Hello derrick cheng, welcome back. You can do either.
@@KleoYan hi kleo, apologies for the late reply, missed your message notifications, thanks a lot for ur advice, appreciate it!
@@derrickcheng2834 you are most welcome.. all the best with your build.
Good video!! Whats the name of the splitter cable?
Hi Rafael A Rodriguez Estronza, welcome to my channel. I have no idea the actual name for it as you can't get this cable individually. It comes with the 3 fan pack set.
But I ask for the RGB Splitter. That one not come with the fans.
Hi I just plugged in my infinity fans but can’t update controlller or change rgb
Hello Commitedexile, welcome to my channel. Maybe go through the baby troubleshooting steps from this video ua-cam.com/video/jz7bSRVT6r4/v-deo.html might help you. Have to be patience and to narrow down the issue you are facing.
Is it possible to turn off the mirror rgb on the sides but leave the rgb on the blades and the lines on?
Hello OG GigaChad, welcome to my channel. Nope as it does not have individual control for the side infinity mirror. The L-Connect 3 only able to control the blade or the frame at the top. Unless u set brightness to the frame to zero then only then blade will hade the lights on.
I really need help with mine. Everything works including operating fan speed using l connect 3 but my sl infinity rgb are not working. I have the hub plug as intended. X2Sata and USB header. Please help
Hello Adam Cramer. Welcome to my channel. You might want to try the steps below. Best to do from the very basic up.
Basic Troubleshooting steps
Disclaimer : Though the chances are very low to brick firmware updates on motherboard and to any controllers. I will not be responsible if you have brick your motherboard or controller.
1) Remove all argb apps (Asus Armory Crate / MSI Dragon Center / Giga Fusion / Asrock Polychrome). If the brands which I have mentioned, do have a uninstall tool like the Asus Armory Crate, use that, else use Revo uninstaller ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller ua-cam.com/video/uMgUYiakpxM/v-deo.html
2) Make sure your motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there are, kindly update those bios firmware version.
3) Make sure your chipset driver for your motherboard is up to date! For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html
4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second
5) While waiting, please do not use KVM switches. Disconnect all devices that are connected to your motherboard (front / back IO). Leave only your Keyboard, Mouse , Monitor and Ethernet (If you have) connected directly to your motherboard.
If your monitor has a KVM build-in, remove the USB cable from your monitor to your motherboard USB socket. If your mouse and keyboard are connected to your monitor, please remove them and plug them directly to your motherboard instead.
6) Plug only one Uni controller or Strimer Plus V2 controller. If its for Uni Fan (SL/AL) use only 3 fans to an output of the uni controller.
7) Plug the power cable and turn on your PC
8) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni / strimer plus V2 controller.
9) Install the L-Connect 3 app only lian-li.com/l-connect3/ (current version 1.3.16)
10) After installation, run L-Connect 3, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON.
11) Reboot your system.
12) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed.
13) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 14) and proceed step 16)
14) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again.
15) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses)
16) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file.
Here is another video explaining how L-Connect 3 should be in order to have it work perfectly. ua-cam.com/video/CgvuUFeff8U/v-deo.html
Can you control your pwm pump with the LC3?
Hello Boogie Mane. welcome back, I dont think you can as you can't plug the pump header to the SL-Infinity controller. even if you have the SL or AL controller, I would advise you to plug your pump header to it. what if the controller mulfunction? your pump will stop to work.
Lian Li or corsair software ? and ty for vedio :)
Hi Nader-sama, welcome to my channel. I will just use only the L-Connect 3 app from Lian Li if you are using these uni fans.
Great video! I have a total of 11 infinity fans on one controller. My fan header on my motherboard is 1amp only. I believe I'm exceeding the max current for the mobo fan header. Should I install another controller and attach it to a separate fan header? And then put 6 fans on one controller and 5 on the other controller?
Hi Lance Snead, welcome to my channel. If you are using the uni controller to plug your fans, you do not have to worry as the power drawn of your fans are from the controller. Unless you do not use the controller but to plug your fans directly to the motherboard. In your case, I believe you are using the controller which draws power directly from your PSU and not from your motherboard fan header.
@@KleoYan That is correct, I'm using the controller. Makes sense now. Thank you!
@@lancegsnead you are most welcome and all the best with your build.
Hi ! I bought two kits of 3 SL120 infinity fans and I am unable to operate two sets from the controller. when I plug the second wire into the controller nothing happens. however when I try each of these fans in the series that works it works wonderfully ?? do you a a tips for me please !!!
Hi THE PanzerBoy, welcome to my channel. Just to check, in windows, on the device management, under Universal Serial Bus Devices, do you see two SL-Inf device listed? if you only have 1, you should check the usb conntection of the SL-INF controller which you can't control.
Legend, SL-INF-1 controller and SL-INF-2 controller.
1) Check to ensure both uni controller shows under device manager under Universal Serial Bus Devices
2) If its only showing you one. Lets say SL-INF-1 controller is detected, check and reset SL-INF-2 controller's USB cable or to reseat it to your motherboard USB Header.
3) If no reaction, swap the USB cable of SL-INF-1 and SL-INF-2 controller. this is to narrow down if it's a USB Cable issue. Lets say before swaping, SL-INF-1 is working, after swap, SL-INF-1 controller does not work, instead SL-INF-2 controller works. This tells you that your USB Header are working fine, both controllers are fine but one of your USB Cable faulty.
4) even after swaping at step 3. still SL-INF-2 controller not working. swap the controllers. Lets say SL-INF-1 controller is working well on motherboard USB 2.0 port A, swap the SL-INF-2 Controller to Port A and SL-INF-1 controller to Port B. this way it will narrow down if it's a port issue.
Test these out. It can be cable issue, controller issue or even motherboard USB 2.0 Header issue.
Hi,
2 questions:
Can we use the fan connector (that splits the PWM and ARGB) in the 1 individual fan on a cluster?
What do you do with the plastic protector?
Hi David Teo, welcome back. Pardon me, I don’t understand your first question, mind to elaborate more?
The plastic protector is meant to stick on both sides of the fan where the mirror effect is. It’s to prevent scratches. Sorry that I miss out on that.
@@KleoYan In the individual SL INF fan package, the fan connector/cable was similar to SL and AL series (with separate PWM and ARBG connectors). I am asking if this fan connector/cable also be use for a cluster of SL infinity fans instead of the new 7 pin cable?
@@en0n Oh. The individual pack even if u cluster 3 to on, that cable you can’t use it on the uni controller.
Nice, now give us the 140 version LL!
Welcome to my channel Alex Wong, yup it will be nice to have the SL Inifinty 140. I believe there will be in near future. Once again thank you to have visit my channel and to leave your valuable feedback.
Hi! Thank you so much for your video, I have one question and I hope you can give me an answer, I have 10 lian li sl infinity fans, all of them are connected to one HUB and the hub is connected to System fan 2, what do you recommend me?
Hello Carlos Bermudez Diaz, welcome to my channel. the choice is yours, you can either bypass L-Connect 3 and make use of your motherboard fan controller to control the fan speed or to use L-Connect 3 to control the fan speed. I personally will use motherboard PWM to control radiator fans and the rest, I will just use L-Connect 3 to controll the rpm of the fans.
@@KleoYan what I did was to connect the 3 radiator fans (TOP) to the cpu fan header and the rest 7 to the hub and from the hub to sys fan 2, everything is OK instead my pc is shutting down when I play fornite for some reason, after I reset there's no issue
@@ValtrX Hi, welcome back, what about if you play other games, does that do the same too? I would advise you to monitor the CPU temperature while playing fornite. I doubt are the fans that is causing the problem. It might be driver issue, it might be physical hardware issue. maybe can you list down your system specs and OS used in your system. thank you!
Hey man, wanted to ask you about the fan sound profile. Is it still the same as the original sl120 where the motor noise is loud above 1200rpm? Comparable with the silence of the arctic p12 Argb?
Hello Sevsnk, welcome to my channel or are you here before, I forgot. As for the sound, I havven't really got the time to test them out properly. I will be doing comparision test on some argb fans with these uni fans in a video.. do allow me sometime to get back to you. do pardon me.
Ive used the SL-INF for 3 days now. Corsair 7000D Front intake with mesh at 1700rpm and there is no noise except for the air pull through the mesh.
With the mesh off the noise itself is nearly gone.
My AIO, Arctic LF II 360 presumably uses p12 ARGB and at max 2000rpm is about equal in noise when the SL-INF is set to 1700-1800RPM.
@@vara4584 welcome and thank you for the reply. Greatly appreciate it.
Wait which one is exhaust, the mirror side or the logo side?
Hello iNZeL, welcome to my channel. Mirror end is where the air goes in and the logo side is where the air goes out.
I have a problem pleas help me what do i need for lian li infinity 120 fans what conector do i need ?
Hi Jan Dremelj, welcome to my channel, I believe this will help you out ua-cam.com/video/ngj5pGQbt_Y/v-deo.html
Kept replaying and very helpful video! It's gonna be first time be going deep into the Lian li ecosystem. :) Apologies if you did mention somewhere in the vid/comments and I may have missed..
Re: Infinity 120. Just bought a 3-pack and 4 X single fans. And the strimerr (24-pin+8-pin) with the V2 controller.
Qn 1: Shld the strimer controller be on a separate header? Or can it be connected to the main controller hub? (Sync 4 or Sync 5)? Can the app distinguish/recognize between the strimmer and the fans with regards to lighting effect?
Yes, I noted from your other vids that shld give sata power to the Strimer V2 hub and ensure overall usb power consumption is still within limit for the motherboard with other usb devices.
Qn2: I prefer to have the fans on a curve at bios/uefi instead of software (L-connect). If I were to connect say 3 x fans to port 1. And another 3 x fans to port 2 at the controller hub and also connect the hub to a fan header.
Can I, at the app/L-Connect 3, transfer the power/pwm to the motherboard? And correct to say my motherboard will recognize all 6 as a single "unit"? Which means if I want the 3 fans and the other 3 fans to have their own separate fan curve, I will need to 2 controllers - to 2 seperate fan headers? :)
Hello flatwhite79, welcome back.
Qn 1: Shld the strimer controller be on a separate header? Or can it be connected to the main controller hub? (Sync 4 or Sync 5)? Can the app distinguish/recognize between the strimmer and the fans with regards to lighting effect?
Ans1 : For Strimer plus V2, plug the strips to the controller and plug the usb cable from the controller to your motherboard, please dont forget to plug the sata power to the strimer plus v2 controller. you can ignore the argb cable to your motherboard, unless you want to control the argb effects from your motherboard argb application. the L-Connect 3 app will only show the strimer plus v2 dashboard if you use the strimer plus v2 controller. Kindly do not use the uni fan controller for your strimer plus v2, it will not work
Qn2: I prefer to have the fans on a curve at bios/uefi instead of software (L-connect). If I were to connect say 3 x fans to port 1. And another 3 x fans to port 2 at the controller hub and also connect the hub to a fan header.
Ans2 : If you set by pass to motherboard mode in L-Connect 3, your Port 1 and 2 fans will follow the motherboard fan header to which you have plug to.
Can I, at the app/L-Connect 3, transfer the power/pwm to the motherboard? And correct to say my motherboard will recognize all 6 as a single "unit"? Which means if I want the 3 fans and the other 3 fans to have their own separate fan curve, I will need to 2 controllers - to 2 seperate fan headers? :)
I am kind of confuse of what you are saying. can you give a full illustration like the below example
Top - 3 Fans to port 1
Front - 3 Fans to port 2
Bottom - 3 Fans to port 3
and etc.
thank you!
@@KleoYan thank you for your replies.. appreciate it..
Front: 3 Inf Fans -> Port 1
Bottom: 3 Inf Fans -> Port 2
Was asking if I could bypass to motherboard for the PWM only (RGB still under L-Connect 3 app). If so, I believe motherboard will recognise the 2 ports (3+3=6 fans) as 1 whole thing? Coz I am thinking of doing the front intake set (Port 1) as a more aggressive curve and the bottom ones (Port 2) more steady quiet..
@@KleoYan on qn 1: In your other video, you are able to connect the strimer plus controller to the main controller hub.. you are saying we cannot do it for the Strimer V2 Controller into the Infinity Controller Hub (that comes with the 3-pack) ie: into one of the top 2 ports (Sync 4 or Sync 5) using a converter/adapter SM3 female?
@@stylerz79 if you want to do that. Your strimer plus effects will not show in l-connect 3.
@@KleoYan got it.. thank you!
by they way this latest model got no daisy chain cable hey? it got but you need to connect to the controller also rather than connecting it to the other fan it doesnt
Hi Dester, all this while there are no daisy chain cable on uni fans as the fans themselves can chain to one another.
hello kleo, planning to get sl120 v2, i was wondering how do i connect with my ekwb aio d-rgb elite, cuz that also comes with its controller box....
Hello anooymous84, welcome to my channel, you can dont use the controller and replace the SL120 V2 fans to your EK Elite, plug the fans as per normal to the uni controller and use L-Connect 3 application to control both Fans RPM and ARGB. as for the EK pump, plug it to the motherboard pump header and for the argb 3pin connector, you can plug to your motherboard argb 3pin 5v argb header, use your mothernoard argb software to control the argb effects of your EK pump.
@@KleoYan thanks for the quick reply! all ur videos are really infomative!
@@anooymous84 you are most welcome and all the best with your build 😉
Is it possible to connect 2 controllers to 1 motherboard?
Will 2 controllers be displayed in the L-Connect3 app?
Hi Железный, welcome to my channell, yes you can do that. here is an illustration of what I did. ua-cam.com/video/uMgUYiakpxMo/v-deo.htmlf this ua-cam.com/video/a6uYGAcbY_Q/v-deo.html
Great video! I bought 2 x 3 pack and 3 x single pack. Can the 3 x single pack connect to the uni controller? Also, will it work with 2 controllers? I have other RGB items EKWB FLT 360, LED in the front case of EVO, and my 3080 hydrocopper. Can those items connect to the controller and be controlled with L connect 3?
Would love to see a video to connect other RGB items to this new controller and see if L Connect can control those RGB
Hello Dawson Nguyen, welcome to my channel, there four cables that come with the 3 set pack where you can daisy chain the individual pack (make sure is up to 4 fans and not more), then use the cable that is with your 3 set pack to connect it to the infinity controller. as for other argb connection. Yes you can use two infinity controller but you need enough sata source as each controller needs 2 sata source. Also, you will need another USB Header from your motherboard.
I see what I can do on my next video. As currently busy at work. once again thank you to have visit and to leave your valuable feedback.
Thank you for responding so quickly! I'm very new to Lian Li's ecosystem and your videos have helped me a lot! I look forward to your next videos 👍
@@dawsonnguyen7259 you are most welcome, if you do have time, have a look at the video on the dos and donts of these uni controller. though the dos and donts are based on the SL uni controller, they apply the same concept with their AL and this Infinity controllers. you can find that video in this playliste ua-cam.com/play/PLEW-b-2vYDdPo0NzHyeksx012c-nkDapm.html
Great videos man, super helpful! But had a question. I have a custom cooling loop. Is it possible to control all fan speeds based of the CPU temp, like if it was plugged into the CPU pmw fan header, but still control all the RGB through the L-connect software? Like using the cable provided with the three pack at 5:00, plugged into the cpu fan header, but the ARGB one left unplugged so the software l-connect controls it instead of the MB? Or what would be the best way to accomplish that?
Hi Ares, welcome to my channel and do pardon me for the late reply. As for your question, if you are getting a 3 pack set that comes with the uni inf controller. It's not possible to do so as the cable is not separated from fan load and argb load. unless you do some self modification to split out the fan load connection to be a 4pin connector. If you purchase a individual pack which does come with the split. you can control the fans through the motherboard fan header and the argb header, you have to make use of the motherboard argb utlitlity as the only connection point is to your motherboard argb header.
@@KleoYan Thanks for the reply, no worries about respond time bro! Sorry I'm just a little bit confused, this is my first build so I'm still learning. But don't you have to have a fan plugged into the cpu fan header for the computer to post? I much rather control speed and rgb through L-connect plugged into a USB header, I was just under the impression something had to plugged into the cpu fan header to work. I have the AL 120s now, and I have the top rad fans plugged into the cpu header and the rgb plugged into the controller with all the other fans. Just wasn't sure how it would work now since they changed the plugs.
@@ares628 Hi, I see, ok if it's the AL120. This will be a different story, as I thought you were having the SL infinity 120. Now for AL120, you can leave your fan load to your motherboard fan header (total control on the RPMs) and leave the fan argb connected to the Uni AL controller. As for the Uni AL Controller. Just plug the USB cable and the sata will do. you can ignore the Fan PWM & Argb cable.. Reason to do this.. in the event of the uni controller fails, at least is the argb lightening is failing and not your fan from performing it's rpm assigned by your motherboard settings.
@@KleoYan Well I was looking to upgrade from the AL's to the SL Infinity's, but noticed the plugs were different, that's how I came across your video.. So if I plug all SL Inf. into the controller, and plug the controller into the usb header then everything should work? I don't have to have anything plugged into the cpu fan header for the computer to operate? That basically where I'm getting confused.
@@ares628 I see. ok, let me see if I can clear your confusion. There are few ways to do this as listed below :-
Option 1 - Be it SL, AL or SL infinity 120.
1) If you intend to use only L-Connect 3 to control the fan rpm and argb effects, plug the fan load and argb directly to the uni controller. on the uni controller itself, only plug the usb cable and sata cable
2) If you intend to use either L-Connect 3 or Motherboard utility, connection are the same as 1) but you will need to connect the Fan PWM & argb cable from the uni controller to your motherboard. Take note, if you want to control through motherboard utility, on L-Connect 3app, you will need to select Motherboard mode.
Option 2 - Only on SL and AL but not SL inifinity fans
1) If you intend to use L-Connect 3 app to control argb effects and to let your motherboard utility / UEFI to control the fan RPM.
connect the fan argb connector to the uni controller. plug your fan load connector directly to the motherboard fan header.
In this way, you controll the fans argb through L-Connect 3 and your fans RPM via motherboard utility or UEFI. You do not need set motherboard mode in L-Connect 3 app.
Will I have any issues putting these on my kraken Z73 aio?
Hello Antonio Arango, if you are talking about argb, so long your uni inf fans are plug to the control unit from the controll unit to your NZXT controller, it's fine.
Hi I bought the Lian Li - SL Infinity 3 pack and 4 single packs. I'm having a problem How do I connect the the 3 single fans as my front fans and 1 single fan as my rear fan in the Controller. The 3 pack is for my AIO and I don't have any problem on it. Thanks
Hi Regil Calmba, welcome to my channel. you can use the spare cables (7pin) which comes with your 3 set pack (there should be total of 4 x 7 pin cables) use that when you daisy chain your single pack fans together.
Are these compatible with the Arctic liquid freeze II AIO?
Hello Michael Hefferman, welcome to my channel. you can plug these fans to an Arctic LF2 aio not an issue, but you need to take note of the thickness of the radiator. Reason I say this is, though you can place this to your LF2, will there be enough clearance for you to mount into your case. is best to check for clarance. the LF2 aio has a 38mm think rad and plug these fans which is at 27mm, the total thickness will be at 65mm thick.
Is it possible to connect the PWM fans to another controller like the commander core XT for PWM fan speed control while still utilizing the RGB of the L3 connect software that the fans are designed for? Or once I bypass the PWM control I cannot access the RGB options for the software?
Hi David, welcome to my channel, the uni controller accpet a 7 pin connection from the fan which includes both PWM and ARGB cable. if you set bypass to motherboard, you lose control over the argb, unless you find a way to remove the fan connection from the 7 pin and to self crimp the fan cables to a 4pin pwm connector, then that's possible. even if you purchase the individual package, you can plug the fans directly to your commander core XT but you can't plug the argb connect to the uni controller as it's using a 3pin JST03 connector.
@@KleoYan ah I see! great video great content Thank you
@@David-nm4bx you are most welcome, all the very best with your build too.
Does SL Infinity 120 fit to Arctic Liquid Freezer 360?
Hello Al ex, welcome to my channel. Yes it does fit.
Nice planning on building new PC white build . is it ok to buy X3 pack and 6pieces of single X1 pack and connect the 3 single pack to port 2 and another 3 single pack to port 3 of a hub include from the
3 pack3x1
Hi Day if peace, welcome to my change and yes, it’s all good of what you’ve mentioned. All the best with your build 😉
@@KleoYan thank you so much your Channel Is so helpful .
@@whatthefact2423 you are most welcome and just incase if you are having issues on installing the L-Connect 3 application, this might help you out ua-cam.com/video/CgvuUFeff8U/v-deo.html
If I don’t want to control the fans with the motherboard do I still need to plug the smaller cable that makes it do that? Or I don’t need to connect it if I’m going to use L connect
Hello swift, welcome to my channel. If you are only using the L-Connect 3 app to control both fan rpm and argb effects, you don’t need to. Just plug the usb cable between the uni controller and to your motherboard usb 2.0 header will do.
@@KleoYan thank you, I plan on running 10 of these fans. x3 on the top, x3 on the bottom, & x4 on the side of my case. Will one controller be enough to power all of them?
@@swifted yes it’s enough. The uni contoller each port is up to max 4 fans.
Hello Kleo. I was also on that L-Connect 3 beta program. Now I'm looking to mix my Uni Fans SL120 with the SL Infinity. Do you have in mind if is it possible to use the 3-pin adapter to L-Connect plug to connect the SL Infinity (single pack) into the L-Connect 3? I want to start with only two Infinity fans connected on my system mixed with mine Uni Fans SL120. Thanks for the video and any help you can share.
Hi Multiverse, welcome to my channel, if you are thinking to connect the SL Inifinity fans (individual set) to the SL uni controller, that will not work. though is of a JST03 socket, the issue is.. the controller has a chip that will only reflect as SL on L-Connect 3. It will not recognise the SL Infinity which will show in L-Connect 3 app. This video will explain more ua-cam.com/video/CgvuUFeff8U/v-deo.html
@@KleoYan Thanks, Kleo . So, to use the two types of fan models I need to have their respective controllers working, is that the only way?
@@multiversetechub yes correct.
I am planning to use 6 SL Infinity 120 fans. 3 in front for intake, 2 to replace the fans on my AIO, and 1 in rear exhaust. Should I buy 1 triple pack and 3 single packs or 2 triple packs in order to have the right amount of cables?
hello Azmalguthek, welcome to my channel. It really depends on you. for me if total of 6.and to save cost, I will go for a 3 pack and 3 x individual pack. If have dont really have restriction on budget, then get a 2 x 3pack, reason being, it will be good as you have two controller. Incase one is down, you have another while you can sent the faulty unit for RMA with Lian Li, the choice is yours.
@@KleoYan Thank you. I will order the two x three pack in order to have a spare controller, as I am not overly worried about saving the $10. Liked and subscribed!
@@azmalguthek4502 you are most welcome and thank you to have subscribe and all the best with your build.
Hi Kleo,
Do u pref this fans or the UNI FAN AL V2?
Im gonna full white build inside o11d evo rgb, and Galahad II SL-INF 360 (I don't mind replacing the fans).
Thanks for the explanations and your videos!
Hi Varo Go, welcome to my channel. Both AL and infinity is almost identical. But I choose the AL V2 for the infinity. It look sleek on the ARGB effects. Not overdose over the infinity.
@@KleoYan Thank you very much for the answer, Kleo. In terms of noise and performance, are they similar?
@@Varowo If you are using these fans as case fans. both noise are almost identical. If you use it on AIOs then the ALV2 will be abit louder. This is due to the ALV2 are 28mm thick as compared to the SL Inf with is at 25mm thick.
@KleoYan yeah, ill go full sl-inf/al v2 build hehe. It's helped me a lot. Thank you!
@@Varowo you are most welcome and all the best with your build.
Great video thank you for making it. When connecting the cable to the fans the cable connection has a cap on it that can be removed so you can change the orientation of the cable. Noticed that the center mirror is not even centered it wobbles when spinning LOL!!!!! Looks cheesy So did they steal the design from the Antec Infinity Mirror fans or the Zalman ZM-IF120 fans?
Hi Jose Davila, welcome back, I still have not forgotten your question about the Light wing 3. Will be doing that in further vids. As what you’ve mentioned about these fans, yes it’s pack with features as for the center mirror. Looking at it while doing the video. Yes one or two might get offset but give and take regardless if you are viewing from far. As for the infinity mirror on other fans. I have yet to see how they look like. I wouldn’t say is a steal. Is just like fashion. Back in the sixties, there are bell bottom pants and till date, there are still designs on them. Nevertheless thank you to have visit and to have given feedbacks 😉
Hello Kleo,
I have a question!
I bought a triple pack of the SL-INF with the controller and so on and i also bought a single pack one. Are you able to use the fan cable from the triple pack to the single pack?
Hi Akumu, welcome to my channel. Yes I am able to use the single pack with the triple pack controller. all is needed is to use the triple pack cables and to apply on the single pack fan.
@@KleoYan thank you for the answer!
@@akumu7140 you are most welcome 😉
What if you plug 2 by 4 daisy chained fans to the controller, for example port one and port two? Would it be alright for the aRGB? As a side note I always run my PWM on the Mobo for better sensor control, but would it be good if you connect them to L-connect controller in that case as well as well?
Hello Anzhel Tupareev, welcome to my channel. you can plug maximium of four fans to either port. I guess what you are saying is to plug 4 fans to sync port 2 and another at sync port 4 (which are just to control the argb from L-Connect 3) and to plug both daisy chained fans to the PWM header on your motherboard. Yes you can do that no issue. You just need to remember that for sync 2 port, it will follow the argb effects on port 2 and for sync 4 port will follow port 4. then you will have total control on both ARGB and PWM on your fans. (This will be my preferred setup as in the event if controller fails, at least the fans are running accordingly to your motherboard settingd.)
@@KleoYan Marvelous answer, thanks a bunch ^^
@@4etri you are most welcome and all the best with your build 😉
If want to use an 3rd party fan and pump pwm rpm control, do I need to use the bypass cable?
HI Boogie Mane, welcome to my channel, yes you will. need to bypass, but you might face an issue with the argb settings or you can purchase individual pack where you can connect the fan header of these fans to your 3rd party controller but you again you will face argb issues where you dont have a controller to control the effect. unless you plug it to your motherboard argb and to use the motherboard argb to control the effect. please becareful if you do this. there is a limit on the ampere. if overloaded, your mobo argb header might melt or damage.
@@KleoYan What if I use an Aquaero 6LT for the pump, fan and argb control?
Or have LC3 control the argb
@@JunglistPrefection hi I am not sure if the load capacity of that controller. All I can fell u is that each uni fan is with a 0.65a to 0.67a on argb and 0.18a to 0.22a fan load. As for strimer plus v2 that’s about 1.35a to 1.65a or more, depending on dual 8 pin or triple 8pin. So sorry can’t answe ur question.
@@JunglistPrefection that’s the tricky part as the cables on a 3 pack set is of a 7 pin plug. Unless you know how to do crimping to separate the fan load (4pins) and argb load (3pin)
Great video, thank you! So... there' isn't a safe way to connect a total of 9 fans on 2 argb headers on a motherboard. I really don't wanna use the fan controller/software. I'm basically having a 3x3 fans setup (O11 Dynamic, 3 on top, 3 on backside, 3 on bottom), so i could only connect 3 fans on one argb header and the other 6 (2x3) on the other because of the daisychain nature of these fans (having a stack of 3 with only one argb cable). Greetings
Hello Contaminated, welcome to my channel. you are absolutely correct by doing so, as the argb load of these fans are high but it's safe to connect the way you did. that's really good. once again thank you for your visit and to share your method on connecting these fans directly to your motherboard. 👍
can i connect with control box old ver ?
Hello lililiililil, welcome to my channel. if you are referring to use old controllers like the SL and AL in L-Connect 3 yes. but if you are referring to using the SL Inifinity fans to older controller like SL or AL, no you can't.
Tips on buying? Do I only need to buy 1 pack (3 pack) and use the controller then the rest of fan is 1 by 1 to spend less money?
Hello KDF Teddy, welcome to my channel. Yup you can do that as in to have one controller in a 3 Pack and the rest to get individual. For some, just incase, they might get 2 set of 3packs, just to have an additional controller, just incase if 1 is faulty, there is a spare.
Thanks for the Idea you earned my sub! I'll buy 2 (3packs) and the rest is individually
@@kdfteddy2677 you are most welcome and all the best with your build.
So if my motherboard header is 1 amp and the 4 daisy chained Lian li fans are connected to the controller and powered by a sata cable then will it run fine or will it still be bad for the motherboard and also do I still need to connect a cable to the motherboard?
Hi Rodnie Torres, welcome to my channel. They are of different entities. If you plug to the controller. It has power supplied via the psu sata cable to the controller, even if you plus to your motherboard fan header. Unless you are getting individual pack, then you will need to take note of your motherboard ampere. For fan load on the motherboard fan header. Stick to max 3 fans per fan header. As for argb so long is max at 4 fans.
@@KleoYan ok thanks a lot. I was really confused on this but I understand now. I love your videos they are very informative.
@@rodnietorres3082 you are most welcome. Glad you enjoyed the content and all the best with your build too.
My motherboard manual does not specify the amperage of the fan headers, and it also does not mention anything about ARGB, only RGB
Hello Rusty Waldron, welcome to my channel. If your motherboard does not have those argb or rgb header. You can plug only the usb and sata to your uni controller. Make use of L-connect application to control the argb effects.
@@KleoYan It does have I think 1 or 2 RGB headers, just not ARGB
@@rewalston hi. You should not use those, Infact you can’t plug the 3pin argb connector to it. Plus those rgb header on your motherboard are 12volts and not 5volts. As mentioned plug only the usb cable and the sata cable to the contoller and make use of the L-Connect 3 app. You will be fine 😉
Hello. How did you get your Strimer plus v2 cables to work with your infinity fans? I connected the controller that came with the v2 cables and also kept the controller that came with the infinity fans but now the L connect 3 software isn’t finding the fans. Is there something I have to do differently? Do I have to connect the fans or cables to the same controller? They have different connections so I didn’t see how to do that . Can you help me plz?
Hi Miguel, welcome to my channel, this migth aid you. ua-cam.com/video/CgvuUFeff8U/v-deo.html
@@KleoYan the video didn’t help with what I needed but I definitely appreciate you replying to my question, I actually just unplugged everything and plugged everything back the same way I did it and the L connect software started working again with the fans lol weird. I couldn’t find anything on the problem I was having so I just reconnected everything and it finally worked. Thanks again
@@miguelp619 Oh ok.. at least you got your set working, that''s good
Love their fans but the software often freezes my pc
Hello wastedspace, welcome to my channel. how many controller are you using and are you using any KVM switches, like monitor kvm? if you are, that might be the issue of the freeze, sames goes to too many USB devices plug in your system or too many controller but not using proper powered usb hub spliter. you might want to watch this which gives you some idea why your system is freezing. ua-cam.com/video/CgvuUFeff8U/v-deo.html
Hi bro, I have encounter some issues. L-Connect 3 was working fine for a day or two showing the SL Infinity settings. The n all of sudden it disappeared from the L-Connect 3. And the L-Connect seems to be lagging. U have any idea how to solve this issue?
hellow The_pinkfreak231, welcome to my channel. I do not encounter the issue you have. you might want to unplug and replug it back. make sure you power it down before you do that.
can you please help me kleo yan? my l connect 3 app dont see my controller cause its all blank ive done everything checked all cables use different ports check bios settings reinstalled the app but nothing work i think my controller is faulty or blown or anything like that
Hi Dennis V B, welcome to my channel. I have pin up a troubleshooting guide which you might want to follow. anyway i will list it for you, also at the meantime before you troubleshoot, you might want to fully understand how L-Connect 3 works ua-cam.com/video/CgvuUFeff8U/v-deo.html I do understand it's frustrating but once you get it right, you will be enjoying using L-Connect 3.
Basic Troubleshooting steps
Disclaimer : Though the chances are very low to brick firmware updates on motherboard and to any controllers. I will not be responsible if you have brick your motherboard or controller.
1) Make sure your motherboard bios is up to date, please check on your motherboard manufacture website, under support > bios and drivers. See if there are issues with USB and do they have a fix. If there are, kindly update those bios firmware version.
2) Make sure your chipset driver for your motherboard is up to date! For AMD will be at www.amd.com/en/support for Intel will be Intel Driver & Support Assistant Intel DSA www.intel.com/content/www/us/en/support/detect.html
3) Remove all argb apps (Asus Armory Crate / MSI Dragon Center / Giga Fusion / Asrock Polychrome). If the brands which I have mentioned, do have a uninstall tool like the Asus Armory Crate, use that, else use Revo uninstaller ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller ua-cam.com/video/uMgUYiakpxM/v-deo.html
4) Shutdown your PC, unplug the PSU cable from your AC outlet. Press the power switch twice to discharge all current that your motherboard is holding. Leave it for 45 second
5) While waiting, please do not use KVM switches. Disconnect all devices that are connected to your motherboard (front / back IO). Leave only your Keyboard, Mouse , Monitor and Ethernet (If you have) connected directly to your motherboard.
If your monitor has a KVM build-in, remove the USB cable from your monitor to your motherboard USB socket. If your mouse and keyboard are connected to your monitor, please remove them and plug them directly to your motherboard instead.
6) Plug only one Uni controller or Strimer Plus V2 controller. If its for Uni Fan (SL/AL) use only 3 fans to an output of the uni controller.
7) Plug the power cable and turn on your PC
8) Go to your Device Manager, look under Universal Serial Bus Devices, make sure you see the Lian Li uni / strimer plus V2 controller.
9) Install the L-Connect 3 app only lian-li.com/l-connect3/ (current version 1.3.16)
10) After installation, run L-Connect 3, check under Setting > General > make sure Auto-Run on Boot and Minimized L-Connect 3 to system tray at close are ON.
11) Reboot your system.
12) First thing you need, go to device manager and see if the Lian Li controller is listed, next open up the L-Connect 3 app. Check if there is a need to update firmware to your controller. Go to Settings > Update, under Device F/W version, click on Update Check, download and install the firmware. Make sure the firmware is completed. Do a check on device manager and make sure the Lian Li controller is listed.
13) On L-Connect 3 dashboard, check if the CPU and GPU readings are reacting, you might want to test it using some benchmark programs. If there are reaction, play with the PWM and argb functions. If it does not work, skip step 14) and proceed step 16)
14) If Single controller works, shutdown your pc, connect uni fan set of 3 to your output of your uni controller. Do it small steps at a time to hook up your sets of fans. do not do all in one go. If successful and you have a second controller, proceed small step at a time again.
15) Slowly plug back your USB devices (Headset, Microphone, Printer, USB Capture Card and etc). At any point of time as you add those devices one at a time, if L-Connect 3 become unresponsive. This tells you that there power is insufficient to power up more USB Devices. Whatever USB port on your motherboard, there is a limitation as the current are shared across the board, be it front or back I/O and the internal USB Header. You might need to get a Internal USB Hub that comes with a Sata Power source to the Internal USB Hub. (Disclaimer, buying a internal usb hub might or might not resolve this issue, purchase at your own expenses)
16) If it does not work, report your issues to Lian li Tech Support. There is a in build log ticketing system in L-Connect 3 app. this is what you need to do. Go to Settings > Support > Click on “Download log” place a filename and choose a destination drive to save the log file. Next click on “Report” it will take you to Lian Li Tech Support FAQ. Fill up the form and upload the log which is a zip file.
Hi, i have a question, i have the 3 pack lian li infinity, bt my motherboard doesnt have the 5v 3 pins conection. If i use the box to Connect them all, and no the argb cable to the MB , could i control anyway the light effects ?? I a little dificult for me to write in english, Hope you understand my question. And Hope i can Connect and sync my light effect some way
Hi Carlupi CLIPS, welcome to my channel. You do not need to plug the argb cable, make use of the controller to set the argb effects will do.
@@KleoYan oooh you save my life, thanks so much for answer. !!
@@carlupiclips2567 you are most welcome and all the best with your build too.
will lian li make a 140 variant
Hi BrutalDabs, welcome to my channel. that will be awesome if they do. I suggest if you can raise your suggestion at Lian Li Reddit at www.reddit.com/r/lianli/ . Thank you to have visit and to leave your feedback.
my motherboard has no rgb connector. any solution?
Hi David Sim, welcome to my channel. If you have purchase the 3fan pack set. It comes with a uni controller. You do not need to connect the argb cable from the controller to the motherboard argb. All is needed is just the sata to your controller and follow by the usb cable between your controller to your motherboard usb 2.0 header. Afterwhich, install the L-Connect-3 application and to make use of it to control the argb effects.
Hi so i bought one 3 pack of the sl infinity and 9 single packs... reason is avaliablity for the 3 pack is very limited is it still possible to connect majority of the single packs to the controller? If not whats the best way to go about
Hello Adrian Guiao, welcome to my channel. Yes you will be able to connect all to the controller as the 3 pack set should have four cables that has a 7pin plug. Therefore each cable you can daisy chained up to 4 fans and to be plug to port 1 2 3 and 4.
@@KleoYan thank you for the reply brother. So the 3 pack comes with extra 7 pins
@@dopeboiiage yes, the three pack have total of 4 7pin cables which you can daisy chain four fans to 1 cable. so that is total of 12 fans to your controller which are to be plug to port 1 to 4. no issue.
Hey Kleo
Nice video
I have 2 questions
1: can I connect and control the rpm of my water pump from my custom watercooling Wich has a 4 pin pwm connector Wich l connect 3 ?
2: can I connect and control the A-RGB from the same water pump with the controller and l connect 3 ?
Hi J J , welcome back. thanks for the compliment. now if you are using the SL Inf Controller, you will only be able to plug your pump argb to the Sync 2 or Sync 4 port, else for your pump 4pin pwm is not able to house to the controller, as it's using a 7 pin connector.. here is an illustration of the controller imgur.com/gallery/fSbPEFl (look at the controller and the plugs / connectors ) . Therefore you only be able to control the argb of your pump with the L-Connect 3 application.
@@KleoYan but I need the A-RGB cable kit from lian LI right ?
@@JJ-gk5tn yup, that's correct.
@@KleoYan thanks Kleo
Can't wait to see your next inf SL video with the airflow and static pressure tests
@@JJ-gk5tn ok dokie. will try.. as am kind of busy at work at the moment.. but will do that as am curious too.. thanks buddy for the encouragement and to have waited for that video.
So I am actually building a custom case out of wood that is going to house 18 lian fans. I was planning on using 2 controllers and putting 3 fans on each port on the controller. Would I still be able to successfully connect all of this to my motherboard without any problems?
hello Refinald Brown, welcome to my channel. if you intend to control the two uni controller, you will need two USB port on your motherboard. if not you will need to get a internal usb hub. Also if you intend to control your fans via the motherboard argb and pwm (rpm) you can too but with different header on your motherboard. as in argb and fan header.
@@KleoYan I do plan on getting an internal usb hub and will also most likely be controlling the fans with the lconnect software. Do you still think I will be able to manage 18 fans after doing that though?
@@reginaldbrown7879 yes you will be able to as the power source is from your psu to you uni controller and then to those fans. It’s more than enough to supply those fans. Just make sure the usb internal is powered by a sata cable an not just a usb splitter. All the best with your build 😉
Hello, can I connect the Strimer Plus V1 controller to the SL Infinity controller? Will it work? Or i still need the Strimer Plus V2 controller?
Hello Kevin Lim, welcome to my channel, you can do with a converter and to plug your strimer V1 controller to the Sync 2 or 4 in the SL inf controller. but you wont be able to make use of the strimer plus effects from the L-Connect 3. if you want that, you should get the Strimer plus controller v2.
Just built my PC and I tried using a converter from Strimer V1 to Sync2/4 in the SL Inf Uni. Just to share the result incase some will also have the same question, there were 2 LEDs in the 8pin(gpu side) that is just randomly flickering. Didn't made time to fix lol. Much better to use the L Connect 3 controller to avoid hassle.
@@kevinlim3891 Hi, thank you for the feedback. hmm.. yup it's better to have the V2 controller, at least you get to use the full argb function..
To make sure I have the connections right to use one controller to control six 140mm Infinity fans that I'd like the Motherboard to control fans speed on, but use L connect for rgb can I do as follows.... Run both groups of three into the controller using the 7pin connectors, use the Motherboard cable plug in the header to motherboard for fan speed, and then leave the argb connector unplugged so I can use L connect to control? As the controller will have all the 6 fans plugged in it won't overload the one MB header correct?
Hi Nucl3ar, welcome back, if you are having the 3 pack set on both your SL-Infinity. this is how I will plug if you want to controll separately of the fan load and argb effects.
1) 3 x SL Inf fans to controller (example port 1)
2) 3 x SL Inf fans to controller (exmaple port 2)
3) plug the sata source from your psu to the sata cable which connects to the controller (this is where the power is supplied to both fan load and argb lightings)
4) as usual, plug the usb cable between the motherboard and the controller
5) plug only the PWM cable between the controller and your motherboard fan header
6) you do not need to plug the argb cable between then controller and your motherboard argb header.
In L-Connect 3 app, under Fan / Pump dashboard, enable sync with motherboard (Then you will be able to control your fans rpm, using your motherboard utlity)
As for the argb, use the L-Connect 3 app to control the effects you wanted.
@@KleoYan Perfect exactly how I thought it should work again I can't thank you enough for what you do for the community! Only sad thing I got 10 x 140mm LL Infinity's and didn't realize the Corsair 7000d case has a front fan cage/shroud that covers the side mirrors of the fans.
Good looking fans, i still prefer SL ones though. So does this mean SL fans arent going to be continued anymore? Been looking for 120 whites for about a month now and still no stocks. Sucks if Lian Li would discontinue them. These new line of fans are great but SL’s lighting design is what i liked not the kind of inner glow ones. Theres countless of other brands if id choose inner glow designs. Also, thanks for the video, always!
Hi trashboat, welcome back, 🤔 hmm I understand what’s your concern. Let me check with Lian Li if they are to discontinue the SL which I doubt so. Over here in my country. They are still available.
@@KleoYan im wondering if your online shops do offer overseas shipping, i am just from SEA. I have been circling around numbers of pc shops in my area and have no ETA for SLs. It's been frustrating seeing my pc not complete because of SLs lol. Thanks for responding. Have a nice day!
@@winterume you might want to get intouch with my to go shop and I am not sure if you are able to order through this shopee.sg/product/692746462/18901775406?smtt=0.213109193-1655517326.9 if you unable to, send an email to general@cybercyphercomp.com as I do know this shop do ship to some overseas in Asia.
@@KleoYan Thank you very much for keeping in touch. Hope they do. :-D Always appreciate how detailed and through your videos are, even adding some troubleshoots for possible issues.
@@winterume you are most welcome and thank you for your support too. 😉
Hey Kleo very nice videos I am glad i found your channel.
I would have a question for my future build.
I am planning to use a arctic liquid freezer II 360 aio or a be quiet silent loop 2 360 aio with 3 lian li sl infinity 120.
I heard that it would be better to have the fans of the aio directly connected to the mainboard. But i am not sure how I will be able to do that wit the lian li fans.
I can connect all 3 of them with the 7 pin cable to the hub but can I also use the cable form the one pack to connect all 3 fans together to the mainboard? Or is it only possible to connect all 3 together with the 7 pin cable? And if I can only use the 7 pin cable what advice would you give me to connect all 3 aio fans to the mainboard?
It would be also great if you could give me your opinion on which aio I should take. Do you prefer the arctic liquid freezer II or the be quiet silent loop 2?
Thank you very much
Hello nickelback96, welcome to my channel. Either AIO will work. infact I am more infavor of Arctic Liquid Freezer II due to the thick radiator but make sure that your case do fit a thick radiator with fans and also to consider the top mounting clearance (the side vrm heatsink and the rear I/O shroud)
If you intend to replace fans from the liquid AIO, I would do this. I will use the individual pack cables where you can connect your fans (PWM) directly to the motherboard CPU_FAN and the argb to the SL Infinity controller Sync 2 or Sync 4. the rest of the SL infinity fans, just use the 7pin cables directly to the SL Inifinity controller port 1 to 4. Please note that for Sync 2 to work, you need Port 2 to be filled and for Sync 4 to work, you need Port 4 to be filled.
@@KleoYan Thank you very much for your fast answer!
Yeah i will use the Lian Li dynamic evo, so the arctic liquid freezer II should work.
I am not sure if i get your instructions right. Can I use only one idividual pack cable to connect all three aio fans to the motherboard? And what do you exactly mean with Sync 2 and Port 2 or Sync 4 and Port 4? Sorry I am a bit new to that topics.
@@batenickelback96 Hi I see, if you look at your uni controller. There are total of 6 port, which 4 of them are labeled as 1 to 4 (7pin socket) and 2 are labeled as sync 2 and sync 4 (3pin socket). As I have mentioned to you, for your radiator fans, use the SL Inf 120 individual pack where the cable is split to 4pin (pwm) and 3pin (argb). Connect the 4pin to your motherboard fan header (CPU_FAN) then the 3pin to the uni controller Sync 2 or 4. This way, you control the PWM using the motherboard instead of the uni controller and control the argb using the L-Connect 3. and to control the argb in L-Connect 3. You will need to have fans connected to port 2 which sync 2 will response to / port 4 which sync 4 will response to.
For the rest of your SL Inf 120 (case fans), use the 7pin cable to connect from the fans to the uni controller. So both PWM and ARGB is controlled by the uni controller using L-Connect 3.
As why doing this. In the event if the uni contoller malfunction. The radiator fans will only affect the argb effects but not stopping the fans from spinning accordingly to your motherboard pwm settings. This is just a safety measure.
@@KleoYan Ahh I see okay thank you very much for your help!!!
@@batenickelback96 you are most welcome. All the best with your build too.
Is the mirror effect to take air out or to put air in? Because the idea is to put them on the side where you can see the mirror effect.
Hi lain, welcome to my channel. If it’s of the standard version of the SL Inf, the face where is shows the mirror effect is drawing air in (example the mirror effect is facing you. The air will not blow to your face)
Now if it’s of the reverse version. It will be pulling air in. Which the air will blow to your face.
@@KleoYan Do I need the lian li controller to connect and control the fan or can I connect it directly to the board without needing that controller?
@@lain1178 you can do either both. For controller you need to get a triple back. For direct connection to the motherboard, you will need to get the single pack. Reason for this the cable in the single pack will allow you to do so but for triple pack, you can’t do direct connection to your motherboard fan headers nor the ARGB 3pin 5volt headers
@@KleoYan I want to put 3 fans but separately, one in the rear, and the other two on the right side of the motherboard. Even with that distribution, I can't connect them directly to the board or to some universal fan hub?
@@lain1178 why not? You can get 3 x individual pack. Daisy chain 2 fans. Where the end goes to your motherboard 1. Your fan header and 2. ARGB header , then your rear fan again plug to your motherboard another fan header and another ARGB header.
How come I only see the system info and setting option when I downloaded the software?
hi@virul_ftw1398, welcome to my channel and you might want to watch this to have a proper understanding. you can skip according to timestamp too. ua-cam.com/video/CgvuUFeff8U/v-deo.html
@@KleoYan Thank you! I will give it a try
@@Virul_FTW ok. All the very best 😉
Hi thanks for the vids. Can i use the cable that comes with the single case (rgb/pwm split) to daisy chain 3 fans and connect to nzxt aio? So the pwm plug go in the aio splitter fan cable that comes with aio and then the rgb plug go in the lian li controller (sync). That way my rad fans are controlled by aoi software and rgb by lL connect.
Hi rigo vital, welcome to my channel, yes you can do that and I do have a diagram for you as a reference. imgur.com/gallery/zEKCkRf
@@KleoYan thanks for the reply I appreciate it. That diagram however says I can’t plug to the aio fan splitter. To plug fans to lian li controller. Are you still saying that i can do it? or should i stick with the diagram? Im just worried the fans on rad wont change rpm when cpu heats up. Thanks again.
@@rigovital1755 oops my bad. I should have alter it abit. Your SL infinity fan load connect can go to your aio fan spliter but your fan argb goes to sync 2 or sync 4 port.
@@KleoYan yes. This is what I wanted to make sure i could do. Thank you much appreciate your time. Keep it up amazing work
@@rigovital1755 you are most welcome and all the best with your build too.
@kleoyan, hi i'm getting 10 of those fans and will do 3 times 3 fans and 1 for the back, i'll be able to add them all to the controller. but how much power will come from the controller? i don't want it to burn my mobo and to which input do you propose i install it? thanks for helping a first time builder out
Hi Gumme LE Grand, welcome to my channel. you need not have to worry about the power to your fans. just make sure that 1) all sata source are plug to your uni controller 2) do not exceed more than 4 fans to each port. (Port 1, 2, 3 and 4, max fan is up to 4).
you will be fine and if you intend to use L-Connect 3 to control the argb effects, you dont need to plug the argb cable from the uni controller to your motherboard argb header, unless you want to use your motherboard argb effect. same apply to the PWM cable.
@@KleoYanthank you for responding this fast, so if i get it right i just have to make sure the sata cable and usb are connected to the motherboard and i'm good to go? (if i want to use the controller for the arg)
@@GummeLeGrand hi, you are most welcome. What I meant is. Make sure the uni controller is powered by the sata cable. Maybe watch this and take note of what I have mentioned in this video ua-cam.com/video/CgvuUFeff8U/v-deo.html
@@KleoYan i watched the video, thank you for your help, it was very clear
@@GummeLeGrand you are most welcome. all the best with your build too! 😊
So you cannot connect single pack fans to fan hub? I just ordered 13x lian li single packs and fan hub. My situation is that I gonna use 6x fans for top push&pull configuration, 1 rear exhaust, 3 bottom intake, side intake. I'm trying to find a way how to connect all of them to be able to control them separately, ,maybe you have any ideas? Would help me a lot bro
Hi Chuck Norris, welcome to my channel. If you have gotten all 13 SL Inifinity fans without the SL Infinity uni controller which are included in a 3 pack set. It will be an issue where you are not able to use the L-Connect 3 app. As for the fan hub you are refering to, I am not sure which hub you've gotten and I have no clue if there is a separate SL Infinity uni controller sold out there, plus if there is a separate unit, I have no idea what's provided in this unit. Let me know which fan hub did you get, if not I am not able to suggest or to help you with. thank you!
@@KleoYan Found that aliexpress has uni hub seperately sold woth all cables that comes with 3x pack but I tried to bypass that and find an aftermarket hub which is razer argb hub. Reason behind this is signalrgb program which allows custom effects and a lot of customization but lian li firmware is really messy so its not supported. Also it offers lower cpu usage and multiple devices sync
@@ChuckNorris-ei2mk Hi, let me have sometime to answer you as currently busy. sorry to keep you waiting.
Hello, I have a question about these fans, a few days ago I put together my new configuration, then I ran it and noticed that the bios detects the fans but I can't control them
their speed, do you think I will be able to control them after I install the fan software and note that I want them to be bios controlled or is the problem more serious I don't have Windows installed yet and I haven't done anything in the bios everything is still fresh
Hi Atanas Beinov, welcome to my channel, yes you will be able to after you've installed the L-Connect 3app, reason that you can't do it at UEFI / Bios, your fans are connected to the uni controller. you will need the L-Connect 3 app to set to sync with motherboard mode, if not you are not able to controller the RPM via your motherboard Bios/UEFI.
@@KleoYan Thanks
@@atanasbeinov1109 you are most welcome, all the best with your build too.😉