I have this unit and the Salus EP210 programmer with an electric combi boiler (Thermaflow). Can you please do a video setting the programmer? The programmer is the master heat control (?). Many thanks.
Hi Allen - I asked help from Salus themselves but they said it wasn't their thermostat but a boiler problem & that I needed a engineer to come out to check the boiler Well they got that completely wrong - it was a loose wire in the thermostat receiver that was making the boiler erratic. I thought I would let you know as you might like to add it to your other problem solving ideas. Thanks for all your help.
Hi, if the hand symbol is on it means it's in Manual mode, so it won't follow the schedule, oyu can just turn it up and down as required. While in this mode you could also press the +Hr button (and select how many hours you want) it will then ask for a temperature and the thermostat will stick to this temperature for however many hours you selected. Many thanks
Morning Allen & yet another question as boiler is still very erratic. It fired up okay but after a couple of hours the rads went cold & when I put the temp up a lot higher, the boiler wouldn't fire up again. I did this 3 times but still no luck. By the way where is the +Hr button? Many thanks as always.
Hi, if the hand symbol is on it means it's in Manual mode, so it won't follow the schedule, oyu can just turn it up and down as required. While in this mode you could also press the +Hr button (and select how many hours you want) it will then ask for a temperature and the thermostat will stick to this temperature for however many hours you selected. Many thanks
Hi - thanks for that but unfortunately the numbers just kept flashing & then stopped & the thermostat just turned off. Can you show me how to stop them flashing & keep on the number I want. Many thanks & a happy New Year
@@LaviniaHigginson Hello, if you're pressing the arrows up and down to select a set temperature, the numbers will flash for a few second. It will then go back to showing you the room temperature. eg. if it says 20 and you then turn it up to 22, it will go back to showing 20 but with the flame symbol on, which will then fire the boiler until the room reaches 22. Hope that helps
Hi & thanks for your answer. I still cant make the boiler work, so wonder if the boiler is broken rather than the thermostat. It does everything you say, but after you have selected the temp, it flashes, there is a hand & flame symbol and it goes back to the room temp and nothing happens & the boiler doesn't fire up. Any thoughts? Many thanks
Hi Allen, just installed this thermostat to my Baxi boiler, wish I'd done it sooner, now I can turn the fish tank heaters off and save on the leccy! Just one question, when in manual mode, will the temperature stay the same as what you set it to and over ride any schedule settings? Thanks Aaron
I set my Salus up as explained and the timing looks correct but the heating does not kick in unless we do it manually when we come home, is there a certain setting it needs to be on. Thanks
Hi Allan I ave purchased a Salus DT600Rf. I have read the attached instructions regarding programming the thermostat. I have no idea how to programme the thermostat as the instructions are vague. Any help would be appreciated.
I have the same device but when I set the heating to come on at certain times (7am for example) it doesn't. It only works when I manually select the temperature I want. Any ideas? Thanks.
Hi wonder if you can help i have set the timer to come on in morning and night but heating comes on in middle of night sometimes any ideas what im doing wrong do i need the temperature higher or lower any help is grateful 🙏
If it is coming on because the room temperature is lower than the set point temperature, you can make the set point temperature lower. However, sometimes a boiler in a garage or loft (or another unheated room) will have frost protection, which can turn on the heating overnight in winter when it is very cold outside (look for a thermostat with no dial near the boiler and/or a thermostat clamped to the return pipe). If.frost protection is turning the heating on this is normal and cannot be prevented using the room thermostat.
Hi, if you press the Hand button the hand symbol will come on the screen, this means it's in Manual mode, so it won't follow the schedule, you can just turn it up and down as required. . Many thanks
Hi, if you press the Hand button the hand symbol will come on the screen, this means it's in Manual mode, so it won't follow the schedule, you can just turn it up and down as required. . Many thanks
#SalusSmartHome #SmartHome #Salus ua-cam.com/play/PLTjtaS435JQ97o53OiPcSqL4PLxQdnAiu.html
You explain to me much better than the engineer who came to instal the thermostat
Thank you so much.
Honestly this is the most helpful video about this dammed thermostat thank you 🙏🏼
Thanks very much for your comment, please consider subscribing to support the channel 🙂
I have one of these for ages. Now I know how to get it installed thanks to you buddy. Appreciate your help and knowledge
Thank You
Many thanks& have a very happy Christmas
Thanks very much for your comment, please consider subscribing to support the channel 🙂
How do you get it to stay on constant? Thanks for the video, mate.
I have this unit and the Salus EP210 programmer with an electric combi boiler (Thermaflow). Can you please do a video setting the programmer? The programmer is the master heat control (?). Many thanks.
I will see what i can do. Thanks.
Excellent explanation , thank you 😊
Hi Allen - I asked help from Salus themselves but they said it wasn't their thermostat but a boiler problem & that I needed a engineer to come out to check the boiler Well they got that completely wrong - it was a loose wire in the thermostat receiver that was making the boiler erratic. I thought I would let you know as you might like to add it to your other problem solving ideas. Thanks for all your help.
Thank you for the feedback.
Hi great video you showed how to set for Monday is the settings the same for the rest of the orther days many thanks
Hi can you explain what the hand sign is for and what if I don’t wanna programme it but just put it on for an hour when I choose to . Thanks 😊
Hi, if the hand symbol is on it means it's in Manual mode, so it won't follow the schedule, oyu can just turn it up and down as required. While in this mode you could also press the +Hr button (and select how many hours you want) it will then ask for a temperature and the thermostat will stick to this temperature for however many hours you selected. Many thanks
I cant able to adjust the temperature in manual mode@@JosephSalus-ni7hw
Hi. i have a rt520tx model which is showing E2, any ideas what that means? thank you
Morning Allen & yet another question as boiler is still very erratic. It fired up okay but after a couple of hours the rads went cold & when I put the temp up a lot higher, the boiler wouldn't fire up again. I did this 3 times but still no luck. By the way where is the +Hr button? Many thanks as always.
Hi - could you let me know how to turn this on & off when I come in. I don't want to programme this. Many thanks
Hi, if the hand symbol is on it means it's in Manual mode, so it won't follow the schedule, oyu can just turn it up and down as required. While in this mode you could also press the +Hr button (and select how many hours you want) it will then ask for a temperature and the thermostat will stick to this temperature for however many hours you selected. Many thanks
Hi -
Hi - thanks for that but unfortunately the numbers just kept flashing & then stopped & the thermostat just turned off. Can you show me how to stop them flashing & keep on the number I want. Many thanks & a happy New Year
@@LaviniaHigginson Hello, if you're pressing the arrows up and down to select a set temperature, the numbers will flash for a few second. It will then go back to showing you the room temperature. eg. if it says 20 and you then turn it up to 22, it will go back to showing 20 but with the flame symbol on, which will then fire the boiler until the room reaches 22. Hope that helps
Hi & thanks for your answer. I still cant make the boiler work, so wonder if the boiler is broken rather than the thermostat. It does everything you say, but after you have selected the temp, it flashes, there is a hand & flame symbol and it goes back to the room temp and nothing happens & the boiler doesn't fire up. Any thoughts? Many thanks
How do we turn on heating manually
I don't know how to cancel the mannual control of the thermostat, I have press the mannual button twice , but it can't cancel, please advise
Hello, just hold the hand button down for around 5 seconds. Many thanks
Thanks very much for your comment, please consider subscribing to support the channel 🙂
Hi, when I try to schedule it I can only get it down to 18°C, how do I get it lower?
Hi I have the Salus RT520TX how do I get it to turn the boiler on and off in the mornings and evenings only?
Just set the timer to come on in the morning for however long you want. and then the same in the evening.Thanks.
@@AllenHart999 Do I just set program 1,2,5 & 6 and leave 3 & 4 blank?
@@deonmansleyYou need to set 3 and 4 to the same low temperature to keep the boiler off for these intervals.
Mine switches heating on but wont switch it off at desired temp any idea why? Rt520 rf wireless
Thank you! 🎉
Hi Allen, just installed this thermostat to my Baxi boiler, wish I'd done it sooner, now I can turn the fish tank heaters off and save on the leccy!
Just one question, when in manual mode, will the temperature stay the same as what you set it to and over ride any schedule settings?
Thanks
Aaron
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@@AllenHart999 do you have answer for the manual mode question bud?
THANKS FOR YOUR EMAIL ALAN. I HAVE GOT IT ALL SET UP NOW .
Thanks very much for your comment, please consider subscribing to support the channel 🙂
I set my Salus up as explained and the timing looks correct but the heating does not kick in unless we do it manually when we come home, is there a certain setting it needs to be on. Thanks
Same problem for me, can't get the schedule to work!
Thank you do these instructions apply to the RT520TX model ?
Full list of stats here. Thanks. ua-cam.com/play/PLTjtaS435JQ97o53OiPcSqL4PLxQdnAiu.html
Hi Allan I ave purchased a Salus DT600Rf. I have read the attached instructions regarding programming the thermostat. I have no idea how to programme the thermostat as the instructions are vague. Any help would be appreciated.
ua-cam.com/video/aTkNXXhR2ug/v-deo.html
Hello, is it possible to get off cwu in rt520rf?
I have the same device but when I set the heating to come on at certain times (7am for example) it doesn't. It only works when I manually select the temperature I want. Any ideas? Thanks.
Think I've figured it out, the receiver must be set to manual at the moment (will check in the morning, boiler in kids room).
Is your temperature set incorrectly? Thanks.
Ive just renewed the batteries but the time is now wrong. How to reset the time please.
Hi wonder if you can help i have set the timer to come on in morning and night but heating comes on in middle of night sometimes any ideas what im doing wrong do i need the temperature higher or lower any help is grateful 🙏
If it is coming on because the room temperature is lower than the set point temperature, you can make the set point temperature lower. However, sometimes a boiler in a garage or loft (or another unheated room) will have frost protection, which can turn on the heating overnight in winter when it is very cold outside (look for a thermostat with no dial near the boiler and/or a thermostat clamped to the return pipe). If.frost protection is turning the heating on this is normal and cannot be prevented using the room thermostat.
Hi...i do have the same but i dont know how to switch it off manually without any programmables..
Hi, if you press the Hand button the hand symbol will come on the screen, this means it's in Manual mode, so it won't follow the schedule, you can just turn it up and down as required. . Many thanks
Why did you set off temperature 12 degrees? I dont understand that
How do i turn the programming mode off, it's come on by accident and i just want to only set it manually
Hi, if you press the Hand button the hand symbol will come on the screen, this means it's in Manual mode, so it won't follow the schedule, you can just turn it up and down as required. . Many thanks