Thank you bro I do my best to try n deliver truthful and most assuredly factual information for the 1/5 hobby and two stroke gas engines. I appreciate you🤝
Another informative video. Great you are doing these videos cause it has to be helpful. The good Lord has blessed you with a wealth of knowledge and a whole lot more.
God, guns, and rc cars, not much more a man can ask for. I just picked up my first baja and have learned alot. Very informative channel! Nice to find other God fearing souls making family friendly content.
Dakota thank you very much brother! What a great comment! This channel is to help people spiritually and mechanically haha! I love this stuff! Thanks again bro and congratulations on your baja! That as you have learned is my favorite platform! I appreciate the support and Im more than happy to help! I hope you are having a blessed week brother! 🙏🇺🇸🤝
HI BROTHER AS USUAL GOOD ADVICE STILL APPLIES TO ALL ENGINES!! WHAT DOES THE FIRECRACKER DO ON YOUR COUNTERTOP!!!! your change of profession... Good luck 🤣🤣🤣🤣🤣💯💯💯💯💯
Hey brother Jeff great tip. Have not had a phone for a while just got a new one. I have a stupid question for you dos the hole in the gasket line up with the hole on the engine and the intake manifold my old engine that I cud not get to run right wos not it was upsidedown pretty sure that's wrong. Rebuilding the 30% north 38cc that came out of the DTT-7s v2 please let me know and sorry no comments last 2 or 3 video no phone and thay were really good videos have a blessed one see you on the next one brother Mike is out oh happy late Thanksgiving I hope it was good
Hey brothers Mike that hole is the pulse hole for the carb and absolutely the gasket hole needs to line up with the intake hole or it will simply not run or idle but wont move as soon as you go to give it gas it will die immediately because the diaphragm needs the pulse to pump the fuel but the engine will run without a pulse just most likely die. And dont ever worry about not being able to comment bro! Its totally cool and very understandable! God bless you brother!! And my Thanksgiving was a blessing thank you brother🙏!
Hi ! Very good video ! It’s similar for Rovan 45cc ?? Because I will soon order a baja rovan 45cc and I would like to know if I should open it before starting? Thank you!
Hey buddy its different for the .45 I have a video for that too. Its called indexing the plug. You want to index the plug for the .45 the depth into the cylinder is okay that is not the issue there. Its much different
I wouldnt do it. It will change the port timing. That cylinder already has a bit of free porting. The engine has 15:1 compression already. You will highly highly benefit from removing the lower ring if you have a dual ring 36. That will really wake the engine up. As it drastically removes heat and friction
@@frosty7154 you aint kidding man the holidays seem to fly by. Ill be sure to drop a service time near Christmas for sure! Gotta offer up Jesus to people you never know maybe one person will decide to accept Him! I hope you have super blessed rest if your week bro.
I will be looking forward to watching your service time and I really enjoyed watching your service times and plus God wants us to spread the gospel to everyone and God is looking for that one lost sheep and I am getting to realize we can't save everyone because even Jesus couldn't save everyone and I can tell I am changing a little bit each day because I don't swear like I used to and I am still struggling with my porn addiction in my lust but I have faith God will break my chains and I am getting a real lies I love my sin more than I love God and is it true more you read the Bible more it changes you
No sir its already a single ring! Your good with the Rovan 30.5. Only issue I have heard with them is a bad tune and over revving can break the connecting rod. Other than that its a decent engine!
Yes bro and if you remove the lower ring on the piston the 36 will have a lot more power. Same With the dual ring 45. The dual ring was a bad Chinese idea.
Hey Rick not all vids just the last few. I ve been cleaning on them and I just wanted to show my 1911 collection because the guys seemed to like it. Thats all I got now . I turned more than half of my collection into RCs haha. It also signifies our freedom here in the USA 🇺🇸 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
@@eastsiderc ... Yes just a few videos had the pistols in them. Coming from you ,I was quite surprised to see them . "People seem to like them " then do a video about them I have a few myself. Happy Holidays
Thank you brother! You don’t find content like this anywhere else!!
Thank you bro I do my best to try n deliver truthful and most assuredly factual information for the 1/5 hobby and two stroke gas engines. I appreciate you🤝
Another informative video. Great you are doing these videos cause it has to be helpful. The good Lord has blessed you with a wealth of knowledge and a whole lot more.
Thanks mom and blessed us with an awesome engine builder too!
God, guns, and rc cars, not much more a man can ask for.
I just picked up my first baja and have learned alot. Very informative channel! Nice to find other God fearing souls making family friendly content.
Dakota thank you very much brother! What a great comment! This channel is to help people spiritually and mechanically haha! I love this stuff! Thanks again bro and congratulations on your baja! That as you have learned is my favorite platform! I appreciate the support and Im more than happy to help! I hope you are having a blessed week brother! 🙏🇺🇸🤝
nice tip after all, the 36cc Rovan always has the washers I'm going to do this on mine thank you for the information big hug from Portugal 🇵🇹🇵🇹
Big hug back bro! 🤝🙏 thank you!!
Any improvement? I will do mine soon. This video is great.
Keep the videos coming, sir. May the Lord bless you.
Thanks brother will do. I enjoy making UA-cam vids
Great video, especially for the 38cc motor.
Thank you bro. I appreciate it! 🤝
Good catch dude. Makes a difference for sure 👍
Hey thank you brother hope you’re having a blessed weekend
HI BROTHER AS USUAL GOOD ADVICE STILL APPLIES TO ALL ENGINES!! WHAT DOES THE FIRECRACKER DO ON YOUR COUNTERTOP!!!! your change of profession... Good luck 🤣🤣🤣🤣🤣💯💯💯💯💯
Thanks bro. I didn’t change professions I just like guns too and those are the couple I have!!
Never enough power , always gotta have more !!! 💥💥💥💪
More is better too much is awesome hahaha!
Love it 7:29 gonna try this on my z320!!
Try it bro!! It certainly will not hurt a thing
Great tip. Thanks ror the video
Thanks Robert I appreciate it brother! Any little bit of power we can add is a plus! Especially for those racers
Wow great info! Any insight on CY engines regarding that plug? I have the 23cc for now but saving for that 30degnorth 38cc.
I can have my engine builder check that for ya brother on the 23 cc engine. Because Im unsure of CY
@@eastsiderc that’ll be interesting to know as well!
Hey brother Jeff great tip. Have not had a phone for a while just got a new one. I have a stupid question for you dos the hole in the gasket line up with the hole on the engine and the intake manifold my old engine that I cud not get to run right wos not it was upsidedown pretty sure that's wrong. Rebuilding the 30% north 38cc that came out of the DTT-7s v2 please let me know and sorry no comments last 2 or 3 video no phone and thay were really good videos have a blessed one see you on the next one brother Mike is out oh happy late Thanksgiving I hope it was good
Hey brothers Mike that hole is the pulse hole for the carb and absolutely the gasket hole needs to line up with the intake hole or it will simply not run or idle but wont move as soon as you go to give it gas it will die immediately because the diaphragm needs the pulse to pump the fuel but the engine will run without a pulse just most likely die. And dont ever worry about not being able to comment bro! Its totally cool and very understandable! God bless you brother!! And my Thanksgiving was a blessing thank you brother🙏!
Hey brother good tip gonna try it do u have to take the crush washer off first or does it stay in place
Leave the crush washer on the plug brother!! Just make sure you crush it first in the head before you add the washers.
Great tip brother
Thanks Tony appreciate you my brother!
Hi !
Very good video !
It’s similar for Rovan 45cc ??
Because I will soon order a baja rovan 45cc and I would like to know if I should open it before starting?
Thank you!
Hey buddy its different for the .45 I have a video for that too. Its called indexing the plug. You want to index the plug for the .45 the depth into the cylinder is okay that is not the issue there. Its much different
Hello bro, what do you think of taking the head gasket out of the Rovan 36 cc 4 bolt engine to make more compressors and power?
I wouldnt do it. It will change the port timing. That cylinder already has a bit of free porting. The engine has 15:1 compression already. You will highly highly benefit from removing the lower ring if you have a dual ring 36. That will really wake the engine up. As it drastically removes heat and friction
do you have any research paper about the distance of spark plug should be parallel with the combustion chamber? let me know if there is
I dont have any paper work bro I have just learned from professional long time engine builders
Hey... would you happen to know how many washers for the rovan 45cc engine?
None that requires plug indexing I have a video on it titled Indexing the 45 or something like that. Check it out bro! Have a great night
Nice work
Thanks bro
Hey and how was your Thanksgiving with your family
Hey Phillip great brother! I hope your thanksgiving was great to bro! I can’t believe Christmas is right around the corner !!!
that's great to hear and my Thanksgiving was great and These days are going by fast and Most people these days celebrate Christmas wrong
@@frosty7154 you aint kidding man the holidays seem to fly by. Ill be sure to drop a service time near Christmas for sure! Gotta offer up Jesus to people you never know maybe one person will decide to accept Him! I hope you have super blessed rest if your week bro.
I will be looking forward to watching your service time and I really enjoyed watching your service times and plus God wants us to spread the gospel to everyone and God is looking for that one lost sheep and I am getting to realize we can't save everyone because even Jesus couldn't save everyone and I can tell I am changing a little bit each day because I don't swear like I used to and I am still struggling with my porn addiction in my lust but I have faith God will break my chains and I am getting a real lies I love my sin more than I love God and is it true more you read the Bible more it changes you
Does this work for the 29cc and if so how many washers
I have not checked the 29 so I cannot give you a valid answer.
Does this apply to the Rovan 30.5cc
No sir its already a single ring! Your good with the Rovan 30.5. Only issue I have heard with them is a bad tune and over revving can break the connecting rod. Other than that its a decent engine!
Does this work for the 2 ring 36cc motor?
Yes bro and if you remove the lower ring on the piston the 36 will have a lot more power. Same
With the dual ring 45. The dual ring was a bad Chinese idea.
Why show a pistol each in your videos ?
Hey Rick not all vids just the last few. I ve been cleaning on them and I just wanted to show my 1911 collection because the guys seemed to like it. Thats all I got now . I turned more than half of my collection into RCs haha. It also signifies our freedom here in the USA 🇺🇸 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
@@eastsiderc ... Yes just a few videos had the pistols in them. Coming from you ,I was quite surprised to see them . "People seem to like them " then do a video about them I have a few myself. Happy Holidays
Does this work with the 30.5cc rovan
I think the 30.5 cylinder is fine bro. And does not need one. I will double check with engine building brother.
Nice 1911 I believe
And it’s a Kimber 😏
Thanks bro it shoots really well! Has a nice kick!