Great video and so very easy to follow. It's so difficult to find info for 2015 Aygos to present, I've been struggling to find the internal fuse box to change the fuse for the Output/Cigarette lighter - not only how to access it but safely take the panel off if necessary. Tricky wee devil, but I refuse to take it to a garage if I can do it myself.
Thx for the video; have recently bought a C1 and wanted to upgrade the radio to the one with the touchscreen, but couldn’t find the partnumber of the radio, finally have it and how to remove the radio.
OMG been putting off buying a new city bug until I find away to replace that horrible thing with a CD player. Thanks for this video. Only thing missing is a recommendation for a replacement unit.
I’m afraid not…the problem with third party radios and the wiring is that you lose all the things like steering wheel controls as the accessories that claim to work with them don’t.
Hi there, excellent video, thank you!! I have just got a 2015 Aygo and am looking to add some rear speakers. Before I go tearing the car apart, do you know if the head unit have 2 channels or 4 channels of speaker power, please? Thank you!
How did u deal with the new unit needing any programming? My citroen dealer says they wouldn't fit a used unit as wouldn't be able to update it & I see ebay sellers advising units may need a code
Great video thanks. Straight to the point. I just have two questions … how do i unclip the hazard connector… where do I press? And secondly, how do I unclip the connectors going into the rear of the radio? Thankyou and happy new year.
Hey, 1. You don't actually need to unclip the hazard connector, just lean the plastic to the left so it's out the way, the hazard cable is long enough 2. Most of the connectors at the rear have a push down clip on the top in the centre, you just hold this down and wiggle the cable out...they can be a bit stiff
I've just picked up a 2015 Citroen C1, and I want to add some rear speakers -- do you know if this head unit supports four channels, or would I need to change the unit / add an amp?
Hi thanks for the video. Any thoughts as to why the touch screen element wont work C1 Flair Puretech (2014) ? radio works fine but is not functioning as a touchscreen. All comments welcomed !
Hi Brian, I'm not too sure to be honest, if you can get to any of the settings to factory reset it I'd try that, if not I'd check all the cables are still connected behind the stereo, otherwise it sounds like it might be a hardware issue
Hi, great informative video! We have a 2014 C1 and the seatbelt warning/passenger airbag display block (in a recess between the touchscreen and windscreen) has somehow been pushed in and is now in the guts of the dash. Is it possible to push it back in from the inside if the bits of trim and air vent are removed as shown in this video? Many thanks, Ben
Hi, I got Peugeot 108 ( 2016 model and Sat Nav ), I want to upgrade 2019 model Apple CarPlay head unit, Is just simple unplug socket then just only replug in new unit ? Thanks
You can try but if the radio turns on and the touch screen doesn’t work I think it’s unlikely to be a dodgy connection. If it doesn’t turn on at all it could be a connection or a fuse
Hi Mark, do you know if the unit's gloss black fascia can be removed from the screen unit itself? So you're left with the plastic trim with button holes in it?
Video was great and straightforward. Although I have a question that I'm really hoping you can answer. I own a Peugeot 108 Access 2016 (the entry model) and I don't have a touch screen, rather a radio. I'm really looking to replace the radio I have with the Peugeot touch screen (found in the same model), but I have so many questions, with the main one being if it's even possible. I'm in desperate help, as I've been looking everywhere asking people and no one knows. And in case you don't know, can you suggest me where I can find someone who can help answer my questions about this installation?
Hey, I think you should be able to switch them out. The best way to tell is going to be to take your existing radio out to check the connections at the back
Yeah, an easier approach might be to find pictures of the back of your existing radio and the touchscreen one online (eBay is a good starting point). You won’t need all the same connectors as some relate to optional extras such as digital radio and rear cameras but you’ll want to make sure ports look the same
@@MarksTechVlogs Alright, thank you so much I'm gonna start researching. Its also really difficult to have my questions answered because there is not much content online, atleast to my knowledge, as far as the whole touch screen thing is concerned.
Thanks for the vid! I have exactly the same radio. Found nothing on Google, very resourcefull! The thing i'm wondering is what you do with the two holes for the standard audio's buttons. I am looking to replace the radio and install my old sub in the back, but the (Sony) radio's I was looking at seem to be shaped differently, leaving the two holes. Is there a solution to cover this? Like a lid/cap for the new radio?
I’m not sure I completely know which holes you’re talking about but you can by fascia kits which essentially add the rounded edges back in (does that make sense?)
@@MarksTechVlogsMy bad! I did not know that you could buy these shapes, but this makes sense! I was not aware you could replace the frame which fits another radio. Therefore I thought you would be left with two holes (two buttons of the original radio). I'm going to find a frame and build in a Sony radio. Most radio's have a universal size right?
Good day, Mark. My name is Roman. I have a Peugeot 108 produced in 2018. Radio 7 inches. The radio has 2 buttons. Model: 86140-0H010 ID: 13TPDAEU-EA01 Audio: 0840 OS: 0621 Android Auto and Apple Car Play does not start. There is a button "connect to phone" in the menu, but only charging is in progress. My phones in other cars work with Android Auto and Apple Car Play. Is it really not there and you need to buy another radio tape recorder? There is a video on UA-cam where the radio with 2 buttons and they have Android Auto and Apple Car Play. Is there a problem with USB? Can you say something? I'll be very thankful.
Hey, I’m afraid if the radio only has two buttons then it doesn’t have CarPlay. It’ll have something called AppInCar which doesn’t work anymore. You can switch the radio out for one that does support CarPlay (which is what I did), the easiest way to do it is to get hold of the updated model. I wrote a blog on how to find one and the model number here: marktiddy.co.uk/posts/adding-carplay-into-a-2014-upwards-toyota-aygo
@@MarksTechVlogs Hi Mark, handy video thanks, (it's the Pegeot 107/108 by the way, not the 106 as mentioned in the title). Do you have an updated link to your blog by any chance? That appears to be going to an archive page now,
I haven’t but if you get the factory unit rather than a third party one it’s as simple as just plugging everything into the new radio and as every port is a different shape it’s super easy to work out
Great video! Just to ask, if I were to hook up an underseat subwoofer, what would I need to do exactly, and inside which port can I connect it? Thanks!
@@dtchremix i didnt do it myself, but i took it to a shop where they spliced the cables and connected a high to low converter which I had bought (speaker wires to rca cable) and it sounds pretty good. It's not prefect as the bass is overpowering at lower volume and doesn't really seem to adjust much to volumen control, but I set it up to the level I usually hear my music at and it sounds fine :)
I have a c1 2015. I’m just about to buy a 2019 android auto system from a c1 in a scrapyard(the one with 3 bottoms) is it as simple as a straight swap like your video? Will the new one work as it’s ment too? Also will the new one need a code?
@@andrewobrien2749 Hi Andrew, can you send me a link to the one you purchased? Was it just a standard c1 head unit from a newer model? Mine is a 15 plate and I'd love android auto.
@@joew961 I got it from a breakers yard(scrapyard) most of them will post for u. I just made sure it was a new model from 2018 or 19 onwards(they have the 3 buttons with android auto or apple) just google breakers around u. I payed about 260euros and 10 postage. It was really easy to install just like this video. Take 5 mins. Good luck
I've damaged my screen on my multi media I stuck my sat nav to it and it's left a horrible mark can I just replace the plastic covering without having to get the whole player
I don’t think they are, the one I picked up came from Poland and is branded for Peugeot but works fine in my Toyota and didn’t require a code or anything
Yeah and it's not a standard USB in the back as it (I think) also connects to the built in headphone jack that's next to the USB at the bottom of the central column. The input looks like this: www.blog.marktiddy.co.uk/wp-content/uploads/2020/09/Screenshot-2020-09-12-at-13.57.45.png
Can you recommend or point me in the right direction for a new stereo. I have this one and want CarPlay. I don’t know where to start. But now I know how to get this one out lol great thanks
I can. I ended up getting the updated Toyota radio form Poland. There are third party radios that work but you have to buy all sorts of adapters and can lose things like steering wheel control functionality. I wrote a blog including the part numbers to look for here: marktiddy.co.uk/posts/adding-carplay-into-a-2014-upwards-toyota-aygo
@@TiNiB This is the updated link bestsmarthomereviews.com/how-to-get-apple-carplay-in-your-toyota-aygo/ and the site I got it from was allegro.pl - I am actually currently selling mine as I sold my car. The eBay link is www.ebay.co.uk/itm/304669548951
I have an old version of this radio, similar to this one, it does not have mirror link, linking my mobile android phone to the display to access from there. Does anyone know where I can buy a similar radio that has android on it, or just the exact specs for the radio?
I had the same old one that looked the same and had AppInCar that was useless and no longer supported. I picked up the new one from Allegro.pl (a Polish eBay) and I had it shipped using Shippn as it wouldn’t directly ship to the UK. The model number you need is: 86140-yv010 (that’s the one with Apple and Android CarPlay but no DAB)
Try have a look at an upgrade from Pioneer: www.pioneer-car.eu/dk/da/products/sph-evo62dab-uni and, a front cover: www.amazon.de/-/en/Double-Adaptor-Citroen-Peugeot-108-2014/dp/B0148RQ0TA/ref=sr_1_41?dchild=1&keywords=aygo&qid=1607208645&quartzVehicle=111-1336&sr=8-41
Great video and so very easy to follow. It's so difficult to find info for 2015 Aygos to present, I've been struggling to find the internal fuse box to change the fuse for the Output/Cigarette lighter - not only how to access it but safely take the panel off if necessary. Tricky wee devil, but I refuse to take it to a garage if I can do it myself.
Eventually found it and after mastering the art of body folding, got the fuse changed, what a palaver!!
I also used to have an aygo, exact same issue with the fuse box, 3 hours and nearly 3 slipped disks I got the cigarette lighter back working 😂
Thx for the video; have recently bought a C1 and wanted to upgrade the radio to the one with the touchscreen, but couldn’t find the partnumber of the radio, finally have it and how to remove the radio.
I want to do the same. Was it plug and play? Did the wires connect exactly as the old radio?
OMG been putting off buying a new city bug until I find away to replace that horrible thing with a CD player. Thanks for this video. Only thing missing is a recommendation for a replacement unit.
I’m afraid not…the problem with third party radios and the wiring is that you lose all the things like steering wheel controls as the accessories that claim to work with them don’t.
Brilliant guy!! Great video
Hi there, excellent video, thank you!! I have just got a 2015 Aygo and am looking to add some rear speakers. Before I go tearing the car apart, do you know if the head unit have 2 channels or 4 channels of speaker power, please? Thank you!
Sorry, I have no idea at all!
How did u deal with the new unit needing any programming? My citroen dealer says they wouldn't fit a used unit as wouldn't be able to update it & I see ebay sellers advising units may need a code
The touch screen units with Apple CarPlay require no programming, you just plug and play. I ordered mine from Poland, fitted it and it worked!
good job my sunday is now complete !!!
Great video thanks. Straight to the point.
I just have two questions … how do i unclip the hazard connector… where do I press? And secondly, how do I unclip the connectors going into the rear of the radio? Thankyou and happy new year.
Hey,
1. You don't actually need to unclip the hazard connector, just lean the plastic to the left so it's out the way, the hazard cable is long enough
2. Most of the connectors at the rear have a push down clip on the top in the centre, you just hold this down and wiggle the cable out...they can be a bit stiff
Hi Mark. Quick question about removing the red dash trim. Is it simply a case of carefully pulling out ...no screws etc? Many thanks.
That's right, no screws, all clips...it's actually pretty easy to remove
@@MarksTechVlogs nice 1 👍😊 Thanks for the response 👍
I've just picked up a 2015 Citroen C1, and I want to add some rear speakers -- do you know if this head unit supports four channels, or would I need to change the unit / add an amp?
I’m afraid I’m not sure, it’s probably worth finding an owners group on Facebook and asking there, people in those groups are usually pretty helpful
Hi guys,
I've updated my 2015 citroen c1 car stereo for a 2021 toyota aygo. All works perfectly apart from the volume control. Any advice please?
Real MVP right here ! Thank you
Hi thanks for the video. Any thoughts as to why the touch screen element wont work C1 Flair Puretech (2014) ? radio works fine but is not functioning as a touchscreen.
All comments welcomed !
Hi Brian, I'm not too sure to be honest, if you can get to any of the settings to factory reset it I'd try that, if not I'd check all the cables are still connected behind the stereo, otherwise it sounds like it might be a hardware issue
Hi! Is it possible to do this swap with an original radio? So no screen, but it does have bluetooth function etc.
I’m afraid I’m not sure, I think the best way to check would be to find pictures of the back of both online and see if the cables look the same
Hi, great informative video! We have a 2014 C1 and the seatbelt warning/passenger airbag display block (in a recess between the touchscreen and windscreen) has somehow been pushed in and is now in the guts of the dash. Is it possible to push it back in from the inside if the bits of trim and air vent are removed as shown in this video? Many thanks, Ben
Hey Ben, I’m afraid I have no idea...I know relatively little about cars!
I have this exact issue. Did you manage to fix it somehow? thanks
Hi, I got Peugeot 108 ( 2016 model and Sat Nav ), I want to upgrade 2019 model Apple CarPlay head unit, Is just simple unplug socket then just only replug in new unit ? Thanks
Yes, all the sockets are exactly the same
@@MarksTechVlogs ok thanks
Thanks for your help
Can I attach reverse camera cable to this
The default aygo reverse camera attaches but I don’t think it’s a standard connector
Nice video. My touchscreen is unresponsive. Should I do this and look for dodgy connection? Thanks.
You can try but if the radio turns on and the touch screen doesn’t work I think it’s unlikely to be a dodgy connection. If it doesn’t turn on at all it could be a connection or a fuse
Hi Mark, do you know if the unit's gloss black fascia can be removed from the screen unit itself? So you're left with the plastic trim with button holes in it?
I don’t think so, I think only the outer trim I show in the video can be removed
@@MarksTechVlogs I'll try remove mine and see, but massive thanks for your reply. Your video helped me out brilliantly previously 👍
very helpful - thanks
Video was great and straightforward. Although I have a question that I'm really hoping you can answer. I own a Peugeot 108 Access 2016 (the entry model) and I don't have a touch screen, rather a radio. I'm really looking to replace the radio I have with the Peugeot touch screen (found in the same model), but I have so many questions, with the main one being if it's even possible. I'm in desperate help, as I've been looking everywhere asking people and no one knows.
And in case you don't know, can you suggest me where I can find someone who can help answer my questions about this installation?
Hey, I think you should be able to switch them out. The best way to tell is going to be to take your existing radio out to check the connections at the back
@@MarksTechVlogs Check what exactly? Cross reference the cables needed for the touch screen with those in my car?
Yeah, an easier approach might be to find pictures of the back of your existing radio and the touchscreen one online (eBay is a good starting point). You won’t need all the same connectors as some relate to optional extras such as digital radio and rear cameras but you’ll want to make sure ports look the same
@@MarksTechVlogs Alright, thank you so much I'm gonna start researching. Its also really difficult to have my questions answered because there is not much content online, atleast to my knowledge, as far as the whole touch screen thing is concerned.
Thanks for the vid! I have exactly the same radio. Found nothing on Google, very resourcefull! The thing i'm wondering is what you do with the two holes for the standard audio's buttons. I am looking to replace the radio and install my old sub in the back, but the (Sony) radio's I was looking at seem to be shaped differently, leaving the two holes. Is there a solution to cover this? Like a lid/cap for the new radio?
I’m not sure I completely know which holes you’re talking about but you can by fascia kits which essentially add the rounded edges back in (does that make sense?)
@@MarksTechVlogsMy bad! I did not know that you could buy these shapes, but this makes sense! I was not aware you could replace the frame which fits another radio. Therefore I thought you would be left with two holes (two buttons of the original radio). I'm going to find a frame and build in a Sony radio. Most radio's have a universal size right?
Thanks for this video . very helpful
Hi, I got 2016 model but no Apple CarPlay , so Can direct upgrade got Apple CarPlay one pls ? Thanks
Apparently they are just a straight swap to the newer head units with Apple/Android support
Good day, Mark. My name is Roman.
I have a Peugeot 108 produced in 2018.
Radio 7 inches.
The radio has 2 buttons.
Model: 86140-0H010
ID: 13TPDAEU-EA01
Audio: 0840
OS: 0621
Android Auto and Apple Car Play does not start. There is a button "connect to phone" in the menu, but only charging is in progress.
My phones in other cars work with Android Auto and Apple Car Play.
Is it really not there and you need to buy another radio tape recorder?
There is a video on UA-cam where the radio with 2 buttons and they have Android Auto and Apple Car Play.
Is there a problem with USB?
Can you say something?
I'll be very thankful.
Hey, I’m afraid if the radio only has two buttons then it doesn’t have CarPlay. It’ll have something called AppInCar which doesn’t work anymore. You can switch the radio out for one that does support CarPlay (which is what I did), the easiest way to do it is to get hold of the updated model. I wrote a blog on how to find one and the model number here: marktiddy.co.uk/posts/adding-carplay-into-a-2014-upwards-toyota-aygo
@@MarksTechVlogs Thank you so much. I read it, everything is clearly written. I will search the same way as you were looking for. Thanks again.
@@MarksTechVlogs Hi Mark, handy video thanks, (it's the Pegeot 107/108 by the way, not the 106 as mentioned in the title). Do you have an updated link to your blog by any chance? That appears to be going to an archive page now,
Really helpful and straight forward video - thank you. Have you done a video of fitting the new stereo?
I haven’t but if you get the factory unit rather than a third party one it’s as simple as just plugging everything into the new radio and as every port is a different shape it’s super easy to work out
Cheers butty worked lovely!
If you change this radio will a code be needed?
No…mine didn’t
Great video! Just to ask, if I were to hook up an underseat subwoofer, what would I need to do exactly, and inside which port can I connect it? Thanks!
I have no idea if that’s even possible with the built in head unit. I suspect it’s not
@@MarksTechVlogs ahh ok, thanks very much! Then I guess the only way would be to splice the speaker cables and attach wires to that. Thanks!
@@CoolFoxification I'm going to try the same, were you able to connect the subwoofer to the radio without spitting the audio cables?
@@dtchremix i didnt do it myself, but i took it to a shop where they spliced the cables and connected a high to low converter which I had bought (speaker wires to rca cable) and it sounds pretty good. It's not prefect as the bass is overpowering at lower volume and doesn't really seem to adjust much to volumen control, but I set it up to the level I usually hear my music at and it sounds fine :)
I have a c1 2015. I’m just about to buy a 2019 android auto system from a c1 in a scrapyard(the one with 3 bottoms) is it as simple as a straight swap like your video? Will the new one work as it’s ment too? Also will the new one need a code?
It should be a straight swap and I don't believe they have security codes...mine certainly didn't
@@MarksTechVlogs nice one. I’ll give it a go
@@MarksTechVlogs I changed it. Very easy took 5 mins. Now got apple car play. Thanks
@@andrewobrien2749 Hi Andrew, can you send me a link to the one you purchased? Was it just a standard c1 head unit from a newer model? Mine is a 15 plate and I'd love android auto.
@@joew961 I got it from a breakers yard(scrapyard) most of them will post for u. I just made sure it was a new model from 2018 or 19 onwards(they have the 3 buttons with android auto or apple) just google breakers around u. I payed about 260euros and 10 postage. It was really easy to install just like this video. Take 5 mins. Good luck
Hi! Is it hard to remove the plastic part around the gearknob / handbrake? I really can't find a good manual on it. Thanks!
I’m afraid I’ve not removed that before but I’d imagine it’s just held on by clips
@@MarksTechVlogs That's alright, thank you for the response and video! :)
Hi, can replace 2019 Apple CarPlay unit one in 2014 pls ? Thanks
Yes, they’re the same size so interchangeable
@@MarksTechVlogs ok so need unplug 1 cable from black module then plug in new unit ? Thanks
can mk2 aygo stereo fit into a mk1 aygo using the double din fascia?
Does the MK2 one look the same?
I've damaged my screen on my multi media I stuck my sat nav to it and it's left a horrible mark can I just replace the plastic covering without having to get the whole player
I’m not sure….I’ve not seen anyone take these apart
My neice wants to upgrade hers to the touchscreen version
Do you know if they are coded to the vehicle?
I don’t think they are, the one I picked up came from Poland and is branded for Peugeot but works fine in my Toyota and didn’t require a code or anything
@@MarksTechVlogs thank you mate
Is the USB port connected behind the head unit? Need to check the connection.
Yeah and it's not a standard USB in the back as it (I think) also connects to the built in headphone jack that's next to the USB at the bottom of the central column. The input looks like this: www.blog.marktiddy.co.uk/wp-content/uploads/2020/09/Screenshot-2020-09-12-at-13.57.45.png
Mark's Tech Vlogs thanks 👍🏻
The usb isn’t working in my aygo so want to check the connection.
must the battery be disconnected to do this?
No, just make sure the ignition is off
thanks, great video. mission accomplished!
Hi m8. Do you know radio code by any chance please
Hey, these radios don’t have codes
Can you recommend or point me in the right direction for a new stereo. I have this one and want CarPlay. I don’t know where to start. But now I know how to get this one out lol great thanks
I can. I ended up getting the updated Toyota radio form Poland. There are third party radios that work but you have to buy all sorts of adapters and can lose things like steering wheel control functionality. I wrote a blog including the part numbers to look for here: marktiddy.co.uk/posts/adding-carplay-into-a-2014-upwards-toyota-aygo
@@MarksTechVlogs This link no longer works - could you tell me where in Poland you bought the new unit from?
@@TiNiB This is the updated link bestsmarthomereviews.com/how-to-get-apple-carplay-in-your-toyota-aygo/ and the site I got it from was allegro.pl - I am actually currently selling mine as I sold my car. The eBay link is www.ebay.co.uk/itm/304669548951
Hey I brought a screen with 3 buttons on it but can’t get apple CarPlay to work at all any suggestions
Does your phone prompt you or anything when you plug it in?
@@MarksTechVlogs no nothing at all
Phone doesn’t even start charging?
@@MarksTechVlogs yes it all charges but no apple CarPlay
@@harrisonspencer7440 I'm guessing if you press the button with the 4 squares on to get the grid of input options you don't see CarPlay?
Hi I need a new usb cable for this radio, where can i find it? thank you
I think your best bet would probably be to talk to your local Toyota dealer
Thank you very much
Thanks!,
Where can I find a new screen and does it need coding
I got one from allegro.pl and they don’t have any security codes you just unplug the old one and put the new one in
I have an old version of this radio, similar to this one, it does not have mirror link, linking my mobile android phone to the display to access from there. Does anyone know where I can buy a similar radio that has android on it, or just the exact specs for the radio?
I had the same old one that looked the same and had AppInCar that was useless and no longer supported. I picked up the new one from Allegro.pl (a Polish eBay) and I had it shipped using Shippn as it wouldn’t directly ship to the UK. The model number you need is: 86140-yv010 (that’s the one with Apple and Android CarPlay but no DAB)
@@MarksTechVlogs Thank you, I will attempt that. What do you mean by DAB?
It’s a type of higher quality radio (can’t remember what DAB stands for). As I use my phone for music in the car not having it didn’t bother me
Try have a look at an upgrade from Pioneer: www.pioneer-car.eu/dk/da/products/sph-evo62dab-uni
and, a front cover: www.amazon.de/-/en/Double-Adaptor-Citroen-Peugeot-108-2014/dp/B0148RQ0TA/ref=sr_1_41?dchild=1&keywords=aygo&qid=1607208645&quartzVehicle=111-1336&sr=8-41
Just to let you know you've put Peugeot 106 in the title where it should say Peugeot 108.
Thank you 🙏 have corrected it now