After a long struggle trying to get Ubuntu running on VirtualBox-and a lot of frustration-I finally made it work thanks to UTM and ProgrammingKnowledge! This was, by far, the most helpful video I’ve ever followed. Ubuntu is now running smoothly. Thanks a million!
Thank you so much for this video, was getting frustrated because i got a lot of errors and got into uefi shell with Virtual Box, then i found your Video and just did everything like you did and worked 100%. Thank you Sir !!!
Awesome video! - everything worked Thank you very much! One note for those who install Ubuntu UTM on corporate networks - by default the installed VM uses Shared network mode. It didn't work for me so I switched to Bridged mode and it worked like a charm
All I have to say is thank you SO MUCH for this video. You just saved me so much time and pain trying to figure this out on my own. Worked perfectly for me!!!!
Thank you so much for the detailed instructions. I came here with little hope after multiple hours spent on installing virtualbox on my mac M1 unsuccessfully. It took much longer for my pc to finish the installation in 11:44, the whole night and another two hours the next day. However, now it seems to work fine. Only one question, the time shown on my linux is ten hours behind, not sure why it's this way. Hope I will figure it out!
Thanks a lot!!! the only thing is that whenever I open UTM it takes few minutes showing "DISPLAY NOT ACTIVE" I will appreciate a lot if you know how to solve this issue
The only issue I had was installing the Spice guest tools. After trying to just install them individually, the installation was successful with no issues.
I have install ubuntu successfully on UTM watching your video. Really appreciate it. Extremely helpful. Thanks for making our lives easy. I do have a problem that I am looking for solution. I would like to access application that I am able to access within host machine VPN. At this moment I cannot access web application from my ubuntu vm, even-though I changed network config to Bridge network. If you know any steps I can try, would really appreciate it.
🤠 Hi, great tutorial. Questions: 1. Can Ubuntu be installed as a replacement OS on a M1? 2. DO I need to do other tweaks to plug an external HD as a default HD? Thank you 👍
@ I just tried installing everything again from scratch and when I saw the “display output is not active” again, I just left it running and went to the other room. When I came back about an hour later it was on the Ubuntu login screen. 🫢
I am trying to install linux with disk space of 400gb to 500gb but disk space is not getting allocated above 100gb. it's hardly taking 90gb memory space for utm. I need linux with minimum 400gb disk space and now getting erros for low space. How to handle this..? Where to add such disk space so that i can access large amount of memory.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
After a long struggle trying to get Ubuntu running on VirtualBox-and a lot of frustration-I finally made it work thanks to UTM and ProgrammingKnowledge! This was, by far, the most helpful video I’ve ever followed. Ubuntu is now running smoothly. Thanks a million!
Everything worked well the first time. That's rare for these kinds of videos. Thank you, I needed this for a university project.
how much memory did you alloted ...and how many cores ? mine is 256gb variant
How much it took for " installing system" step ?
@@riteshranjan4938 8 cores (after installing), and the installation took at least an hour. Maybe two hours, I didn't keep track of it.
How much did you allotted?@@riteshranjan4938
same
Thank you so much for this video, was getting frustrated because i got a lot of errors and got into uefi shell with Virtual Box, then i found your Video and just did everything like you did and worked 100%. Thank you Sir !!!
Thanks buddy, I was searching daily for a week to find the right video.
Awesome video! - everything worked Thank you very much! One note for those who install Ubuntu UTM on corporate networks - by default the installed VM uses Shared network mode. It didn't work for me so I switched to Bridged mode and it worked like a charm
Perfect instruction! Perfectly paced and everything worked right away! Thanks a lot!
All I have to say is thank you SO MUCH for this video. You just saved me so much time and pain trying to figure this out on my own. Worked perfectly for me!!!!
well presented and simple to follow. Many thanks for this tutorial.
Amazing. It worked on my M1 Max!
16:46 the problem is that after overloading, the car does not move on. It hung stupidly. What to do?
Same here
Omg it worked.. wait for few more minutes … I bet you did that
The video I was looking for. Thank You for your efforts. Everything goes well in first attempt itself.
Thank you so much for the detailed instructions. I came here with little hope after multiple hours spent on installing virtualbox on my mac M1 unsuccessfully. It took much longer for my pc to finish the installation in 11:44, the whole night and another two hours the next day. However, now it seems to work fine. Only one question, the time shown on my linux is ten hours behind, not sure why it's this way. Hope I will figure it out!
Wow. Seriously such a good video. Well done! It worked perfectly and was very clear and concise. Thank you!
Life saver thank you bro 👍
Hi Bro installation issue. It's not showing reboot now. 11:44 help me out.
shutdown the UTM and try again. Try not to change screens while installing
Thanks for this. I had downloaded the desktop amd64 iso image unknowingly.
How long does it takes to finish installing ? Mines been running forever 😭
did it finish? I m having same issue as well right now
@@nb788-j4ysame issue with me also
2-3 hours depends at how your pc's performance
Same here
@@ArindomPratimBorah-dc6mm restart your utm and try again, it should work
Thank you for having this tutorial posted!! step by step you are my hero!!
Thank you so much!! Each and every step was executed flawlessly!!
Best tutorial I ever seen Thank you
Thank you very much for this video 😀
Great tutorial, nicely paced. Appreciate your efforts
Thanks a lot!!! the only thing is that whenever I open UTM it takes few minutes showing "DISPLAY NOT ACTIVE" I will appreciate a lot if you know how to solve this issue
Thank sooooo much for this video, it helped me with my homework!!
Thanks for the wonderful explanation!
Great video,really helpful. luckily, I got this video. Thank you
Thank you for such an excellent video. To the point, precise instructions and the guide. Great effort and such videos are rare. Keep up the good work.
Is it similar like virtual box?
Awesome video and instructions everything was spot on, thanks for sharing the knowledge.
This tutorial really helped; great video
Thanks for an excellent video! Your instructions are very clear and easy to follow.
Great Tutorial. Thanks man.
thank u so much! I've got it succesfully :)
Appeared a curtin bug during installation kernel.
it took for me more than 10 minutes... I think you just have to wait because it will probably works after a long time !
Dude, You are a life saver. THANK YOU SO VERY MUCH. You saved me hours.
PERFECT!!! REALLY PERFECT EVERYTHING THANK YOU! I WILL RECOMMEND
A very very very useful video....thanks a lot..✨
clear explanation, thank you so much.
Thats a great video its working very smoothly in M1 mac thank you so much!
how much memory did you alloted ...and how many cores ? mine is 256gb variant
can you run every program or are you limited by the arm cpu? is it fast?
@@albertoeffe8524 yes we can run every program....it does not depend on arm cpu since it is only used to virtualise on ARM cpu
Thanks man , this was really helpful
I am very thankful to you this video is very helpful for me
The only issue I had was installing the Spice guest tools. After trying to just install them individually, the installation was successful with no issues.
thanks bro, for this video it's work for me.
I have QEMU error when i click on Run button at 7:10. Please help
Did you figure it out??
@@RashmikaSatish no not yet
@@RashmikaSatish nope not yet
thank you bro
Thank you very much everything went smoothly
thanks a lot you helped me out here !
Absolutely incredible!
the mirror links do not seem to work at all. is there any work around for this?
everything worked. Thank you
I have install ubuntu successfully on UTM watching your video. Really appreciate it. Extremely helpful. Thanks for making our lives easy. I do have a problem that I am looking for solution. I would like to access application that I am able to access within host machine VPN. At this moment I cannot access web application from my ubuntu vm, even-though I changed network config to Bridge network. If you know any steps I can try, would really appreciate it.
does the installing the kernel takes time 11:32 ? for me its taking forever
It takes long time .Wait for the result
🤠 Hi, great tutorial. Questions: 1. Can Ubuntu be installed as a replacement OS on a M1? 2. DO I need to do other tweaks to plug an external HD as a default HD? Thank you 👍
thanks, this was life saving
is any thing happens by downloading amd
that's really cool, thanks man
What a lad!🙏🙏🙏🙏
a big thanks ! very hepful
how can we use webcam on ubuntu in utm on macbook ?
display ouptuput isnot active problem
Thanks, You save my day.
Thank you for your instruction. I installed successfully. Why I did not see the software center?
thanks for this video, it helped a lot
Thank you so much.
Wow awesome 🎉🎉🎉
i am getting "Display output is not active" using m3 pro, could any one provide solution for this ?
I'm also getting this. I've been getting it ever since I recently updated UTM. Did you manage to solve it?
@@sololololos no still issue is there, so dropped the plan and using Mac environment instead
@ I just tried installing everything again from scratch and when I saw the “display output is not active” again, I just left it running and went to the other room. When I came back about an hour later it was on the Ubuntu login screen. 🫢
The GUI is not coming up after the reboot now command. It's showing 'Display output is not active'. How to resolve this? Please help.
you are a hero man
How to get a letters and number more more bigger in UTM?
How do I get rid of the top toolbar? (white UTM bar on the top).
thanks work smoothly
is there any way to make vm load faster ? My ununtu takes like 10 minutes to open everytime
Having the same issue
Same here. Any luck so far, pls?
Thank you so much nice video
how to install chrome in this arm64 image please do a tutorial for this
Thank you so much!!
thanks! works as of 2024
Thank you!
hii I followed every step correctly but I am having this issue as I am opening the VM it's showing display output is not active
thanks but i can not more use command tab to switch between apps :(
mirror address failed to connect. how to solve it
I am all black on this topic but still want to ask why do i need to install UTM, what purpose it will serve?
UTM will serve as virtual Box and it will let us emulate/virtualize the Ubuntu OS ...which won't be possible without UTM or any virtual machine/Box
THANK YOU!!!
Thank you my friend i love you you are my hero
Ubuntu is the best🎉🎉🎉🎉
Thanks a lot!
why is it diffrent for me, when i start the ubuntu it show UEFI Interactive shell and i dont knwo hot configure it
sir my last step is not working i am unable to copy paste files in ubuntu to mac?
Me too
right click away from any files that are shown on the page otherwise you will not see 'paste' option.
thanks man working well, if someone struggling with UTM, try VMware Fusion!
but my ubuntu is open in shell instead of UI
What if I want to permanently replace mac os with Ubuntu? How to do this. Please make a video on this.
thank you so much
13:10 login incorrect why?
What is the problem? Reply to me please
Thank you...
How can i install Ubuntu in external ssd ?
I like the installation guide but there was alot of unnecessary steps if you just got the regular amd. it cuts out all the additional steps.
I am facing problem at last i am not gating option of reboot
13:16 , why am I not able to enter the password?
I also have this same problem
I found out, the password won’t show. Just type your password and hit enter
De mucha ayuda. Gracias.
We want it to replace mac os. Not in the vm but in real things
I am trying to install linux with disk space of 400gb to 500gb but disk space is not getting allocated above 100gb. it's hardly taking 90gb memory space for utm. I need linux with minimum 400gb disk space and now getting erros for low space. How to handle this..? Where to add such disk space so that i can access large amount of memory.