Mount a TV on your wall, Sanus Simplicity 22-55" Full Motion
Вставка
- Опубліковано 2 сер 2024
- Install your TV and Sanus Simplicity 22-55" Full Motion TV Mount in 4 steps.
I go over the tools needed and the process that can will give you the confidence to install a small to medium size TV on a wall.
Subscribe and be notified of new how-to's and reviews.
San Diego and SoCal contact info for TV and Home theater installation needs:
Phone -858-519-6333
Website - www.socalinstalls.com
Yelp - yelp.to/qTKq/MjwFLahu22
Get your Sanus Simplicity 22-55" TV Mount
geni.us/wgt12jS [Amazon]
#btheinstaller #tvmountinstall #installhowto - Навчання та стиль
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
Sorry you got a bunch of negative comments. Thank you for showing and explaining what you did, I am stuck as to how the bracket attaches to the mount, but I’ll check for another video. Thanks again 👊🏼👍🏼
Did u ever find out?
Excellent video!!! It helped me easily install and mount a 40" TV using this exact model, thank you! 🙏🙏🙏
Hey , just use this video to mount a 55” LG CX and it was extremely helpful I appreciate it thank you
I’m gonna get the c1
Great video...easy to follow. Thank you 😊
Great instructional video, thanks!
Great view of the tension screw
Great video. Thanks so much for posting it.
Thank you
Thank you man! this was very helpful and I was able to mount my TV.
Yep...you the man. Very helpful..
Thanks for video having trouble w the leveling screws for this mount any tips?
Gracias me ayuda mucho señor
Thanks! Perfect help....
Much better than the previous Sanus installation video by the woman whose video, in my view, is not nearly detailed enough.
Excellent although at the end I was hoping u moved the TV to demonstrate it's mobility
We had a little more to the video that was cut out. I'm sorry. We will be making more, faster moving install videos. Thanks for the input.
On the final step of hanging the tv, is the only thing securing the tv to the wall mount gravity( hook)?. Also, tension screw... that's it? Worried about tv falling
They’ve added a template to the wall mount bracket. A lot easier for centering the holes and the leveling of the bracket.
Good to know.
Great video. Just wondering if tightening the top bolt to the wall, one should level and then tighten the lower bolt.
I normally tighten the top bolts yes and then just drill, and bolt the bottom.
Great video. Thanks for sharing.
Tips on hiding the power cord and connected cords?
Omg the dustpan under the drill is so smart. I never thought to do that.
Overhead angle would have been nice
I was wondering if the sanus 2964 is compatible with the 55” LG tv I put the brackets on back of tv. Hopefully I got the brackets on the right side
Good video
I have the same wall mount and a 55” Samsung that I’m trying to mount..my stud finder is giving me false alarms! When I put the lag screws in where it initially said there was a stud, the screws were starting to come out as soon as I tested it by moving the mount side to side like it suggested.. so now I’m looking for other studs in my wall, located them, but when I drill the bit in, I am not hitting wood or anything hard like I was told I should hit. I’m at a loss and now I’m regretting trying to do this on my own entirely...ahhh!!!
You gotta find a stud with this bracket. I have a stud finding video. There are studs left or right of power outlets and normally 16 or 24 inches each way from there
B The Installer thanks so much for responding..I’m still drilling holes searching for studs..I think I may have finally found a stud?? It was a little harder drilling with the bit..so I’m now going to attempt to mount my mount with the lag screws and see if it does the same thing or not..
Use a magnet to find the drywall screws and then to be extra sure drill little pilot holes so you can find the edges of the studs
Hi, i recently bought the same model but I'm having problems installing it. Your video made the frame that is on the wall easier to install but I'm having problems with the TV frame. I was wondering if you had another video where you better explain the installment for the screws and such.
Yeah that was first ever video. You just place the 2 u shaped bars on the tv, find the screws that match, and then set the rectangle over that and screw it in to the u's. .... its similar to this bigger mount where I show how but not exactly the same. ua-cam.com/video/uPMm_qcGjhU/v-deo.html
would you recommend the sanus 22-55 or sanus 37-90 for the LG oled C1 55” ??? or other option that’s better?
My wall has metal studs. How do I install SMF421-B1 bracket? What drill bits, etc. Thanks.
I have a 50-inch Samsung with a Sanus and I'm installing it outside on stucco and cinder block wall. Also, I need about an inch off the wall do the TV will extend completely flat. Is it OK to mount a 2x4 or other wood to the wall 1st then the bracket? And if so what type of screw or hardware is used going into stucco a d blocks?
Can you comment on the likelihood of hitting cinder block if trying to hang the mount on a wall that is a corner room? I am having trouble getting the drill bit to the recommended depth.
Well what I can say is that you need at least 1 inch depending on the kind of mount. Any arm mount needs a typical 2x4 to sink into. So over 2 inches. When drilling, you should have a good idea of what is behind the wood. If there is space between studs, drill though drywall and check the depth. Even 1 5/8 drywall screws can be used to secure mount with washers... so maybe I'll make a video
The issue I'm having is... Home built in the 70s, where my TV mount was, the studs are 8in apart where I need the mount, but then they're 16in apart but where I can't mount it.
This made it so much easier than the damn manual
That was one of my worst videos as it was my first, but I really appreciate the view. I hope you subbed for more to come. The Samsung frame video from March is quite enjoyable. Thanks
What good is it to show that installation having the tv laying flat
Great video. For 40 inch and other mid size TVs do you prefer to go with single stud mounts like this one or two stud mounts like the sanus slf226? For my install I have a stud centered on where I want the TV.
Either will work. If you get a dual stud type you can pin the middle still. And add toggle bolt top left and right and its plenty strong. Many don't have that perfectly centered stud. I don't use these single stud mounts often, I normally use one with range so I can hit the stud where needed and center tv.
@@BTheInstaller do you think a single stud tv mount with 3 lag bolts can hold a 55in LG CX? Mounting Dream says it holds up to 99lbs Nd the CX weighs about 50lbs. Thanks in advance
Definitely. I have the tvs on my wall alp on single stud and they're all 55
@@BTheInstaller sweet ordering the mount now. Thank you!
@@SourPatchKid562 which mount did you go with? Did it work?
Can you mount this horizontally?
Im mounting 43 inch tv outside in a palapa bar, I need the mount to be horizontal to mount to wood beam. Is it possible to use this mount horizontally?
No, it will just slam down. You can get a ceiling mount to hang from a beam or any normal flat mount with downward tilt can be hung off the bottom of the side of the beam and the tv, depending on the brand.. i have done this, I don't have image but both can be done
NEED HELP! The instructions say I need a 1/8th 3mm drill and that the hole needs to be 2 3/4 or 70mm deep well my drill bit only goes about 1in deep do i need a longer drill bit or what? Im so confused. I thought i had the same mount in this vid but u said urs said u needed a 1/4 bit?
You need to drill as deep as the bolt goes and the bit size would be the same as the bolt not including the threads. So the bolt and bit same size less the thread diameter.
Mmm im lost i tried all night to get this tv up. Will try again tomorrow thanks for your help. U would think the drill bit size would just be clearly described in the instructions? also is there a sure fire way to know i hit a stud? My top bolt became loose after trying to readjust to better level and now i am not sure if its stud im pretty sure i see wood but the bolt just wont stay on. Maybe too much readjusting?
Studs are very solid. If loose it could just be plywood which is thin and then bolts will not stay tight. Also the hole drilled could be too large. Needs to be exact. 3/16 and 1/4 are common. Be safe.
B The Installer well my instruction manual says 1/8 why do u keep dodging that? I am using the same mount in the video and my instruction manual says 1/8 why are you saying 1/4?? Should i be using 1/4?? Thanks for replying i appreciate it
Use the 1/8" bit then. I have no idea what your mount says. They change hardware and instructions over time. That was a video from nearly a year ago... should have info in the instructions.
I don't the you need the lines to the lower hole. You just need to put the top hole in, at the right height, and on the stud. Then for the lower hole, just put your level on the side of the mount, and screw in the screw.
It says no drilling. What do i find? Drilling.
⚓🔥landed🔥⚓
Instructions say it requires M5 screws but there are no screws these size to install TV Bracket Vertical. What should I do?
I am having the same issue
What is the determend hight of the tv from the ceiling?
I use what's under the tv, keep it within 8-12 inches from bottom of tv and then if nothing to use, I rarely put the top of a tv higher than 6ft.
Would be great if we could actually see what your doing😒😒
Check out... literally ANY other video, lol This was the first install video recorded by a lazy editor.
Nice video, but leveling part was what I was most interested in seeing, but you hid all that from the camera.
Is it just me or did he say use a 1/4” to drill the pilot holes? Manual says to use 1/8” and that worked great.
It depends on the size of the lag screw
Great video only thing is don’t touch the screen
Good video, but you often stand too far away from the camera for the viewer to see what you are doing or you stand in the way. An instructional video should show all steps clearly for even the novice to see what needs to be done.
Hi, Just wondering for 65 inch TV. If the mount can't stand on the stud, is it possible for the mount just stand on the drywall with special bolt? Any suggestions?
This guy looks like a young Kurt Russell
I got it and it didn’t include bolts
This mount has 2 black bolts with 7/16 head. Any bolts will do. Even large headed wood screws.
I'm here cause my husband and I F@#$ up!!
If I had a Manual I wouldn't be here
Great until the end, shot of your back at completion.
Right? Dude was fired pretty fast. I do the videos myself now.
I can't see qhat ur doin
Vertical “level” = plumb
We couldn’t see some of your work
Yeah it didn't work well with this video guy. Sorry. Many other videos
Good, but you blocked us viewing you connecting the bracket to the back of the TV with your back!
Terrible videogrpaher and editor prior to me taking over.
@@BTheInstaller videographer? You had your camera on a tripod.
@@zguitarmaster negative. Some dipshit filmed my first 2 videos
We are truly amateurs and you did not show which way to put the first brackets on, ridge up or down, you did not explain what to do if the brackets covered the power source plug in, which ours did and when you did the final tension adjustment you had your back to us and we had no idea what you were doing.
Sorry, the editor didn't know what he was doing and I hadn't picked up the skills yet. They come with directions too.
When you work on table no one can see
Guy, show what your doing, top view, top view... Can't see anything but you with the angle used.
Ha, tell it to the shitty editor man. He shot and edited it and bailed on the effort. I do my own videos now. Watch.... any other video.
@@BTheInstaller good move on your behalf
@@unknownanonymous9459 think about it, 2k for 3 videos to be shot and edited, and as a noob I didn't know what to expect... or now, $150 to clean up my already edited videos that I shoot with my $1500 worth of gear I bight 35 videos ago, lol. I'd be on pace for like $25,000 at this point ? Yeah right. It was bad.
too bad your back was blocking the leveling process...
Thanks for the non tutorial. You don’t show when your attaching the brackets on the back of the tv nor do you show what your talking about when hanging the tv on the bracket. There are a lot of people who are visual and seeing the steps your talking about makes it easy. Your camera person should have known. Looking at the top of your head or your back does not help.
Can't see at the angle! This video is to make it look more hard than it is. Must be good for business.
Hexagonal all the one word not hexa-gonal
Todo iba bien hasta que perforaste la pared.... no pudiste taquetes... Esa chingadera se te va a caer cuando pongas la tv
Terrible, didn’t even show how he put the second part of the bracket in
This was horrible, did not have view of him putting the brackets on the tv.
Whats the point of making these videos if your not going to show us how to actually do it." Just put the mount on, follow the manual"......we wouldnt be here if we could do that
WTF? He doesn't even show us WHICH PARTS he's using before he starts screwing them in.. I'm finding a better video... who produced this? D'oh.
Academy award winning director/producers, obviously. This was my first video. Suck an 🥚
Why not just mount it and then tell us how easy it was. You literally talked and showed none of the work.
Too long
Too much bullshit.