Can recomend them, we measured runout of about 2 microns and im not sure if that is the holder or spindle :) Only downside is the collets are abit expensive.
@@MTDCNC if you have a radial engagement of .003 per tooth then your "off center" would need to be more than .003 in order for one flute to be cutting all the load correct?
Do you have to use an intermediate sleeve
Thanks for watching.
@@MTDCNC I can confirmed you can attach tools directly if your with in the tolerance
Very impressive - expected way more cost 👍
A very well priced system Richard.. Would you like more info from Schunk?
@@MTDCNC Thanks but I am a former machinist- I just keep up an interest :)
Best holders on the market!
Glad you enjoyed the video !
Can recomend them, we measured runout of about 2 microns and im not sure if that is the holder or spindle :)
Only downside is the collets are abit expensive.
Thank you for your input !
The most common thing that happens after I introduce shops to these tools? They try them, and then they call to ask to get more.
Glad you enjoyed the video !
Hes wrong about one flute cutting on ER. He must mean an end mill holder
You will find on many ER's that the cutter is 'off centre' and essentially cuts on 33-50% less flutes.
@@MTDCNC if you have a radial engagement of .003 per tooth then your "off center" would need to be more than .003 in order for one flute to be cutting all the load correct?