These wagons are very old, made by Tri-ang in England. They are shorter than they should be to scale, but I like these shortened models, they are ideal on a tiny layout such as mine (1x1,5 meter). Thanks for watching 🙏👍
Hi Martin, yes that 4-axle diesel was running super smooth, pleasant to see after all these faltering 2-axle locomotives. 😄 Thanks for watching 🙏 Greetings, Erik 🙋♂️
That TGK2 is a great runner, sometimes it can stall at points, but usually it gets over them without problems, even on a low speed. Thanks for watching 🙏👍
Hi Alexander, yes, it often needs a push. The wheelbase is only 2,5 cm, so it easily looses contact. I clean my rails before every running session, but even that is not enough to have a smooth run. But it is so beautiful that I don’t mind pushing it 😄 Thanks for watching 🙏👍 Greetings, Erik 🙋♂️🇧🇪
Hi Erik, there are a few issues that can make these small 0-4-0 locos stall on points. Can I suggest trying to slightly loosen the screws holding the base plated to the chassis, I have 2 Hornby Locos that stalled easily on points and I found by allowing the axles to move a little more really helped as the wheels and axles in the chassis are very rigid. I f any of your track is slightly deformed then one of the wheels can loose contact and stall the loco. The other solution is to fit pick ups to a small wagon and wire it to the loco making it 6 or 8 wheel pickup. I did this to my tiny Hornby Pug and now it runs very slowly over all my points. The wagon can be made to disconnect by wiring plugs and sockets or permanently wired. Cheers, Paul.
Hi Paul, these are very good advices. Thanks 🙏 I will maybe try to get a Peckett B2, these are also cute and are 0-6-0 which should make them great runners, I think. On the other hand, I must try to moderate my passion for Hornby products, because collecting soviet rolling stock ánd British rolling stock all together could become a bit expensive 😁😄🙃🙂 Thanks for watching 🙏👍 Greetings, Erik 🙋♂️
Интересный тест! Насчёт Hornby мне кажеться что правильнее 0-2-0 чем 0-4-0 , если не ошибаюсь то среднее число указывает количиство рабочих осей, а их у модели(и наверно у прототипа) только две...может я ошибаюсь.. но етот паровозик очень подходит к вашему макету, жаль что нужно его подталкивать!)
Да, в Союзе указывали количество осей: 2-осиный паровоз 0-2-0. А в Англии указывают количество колёс то есть 0-4-0. Лучше бы одна система бы было конечно… 🤔😳🙃 Да, Peckett очень красивый 😍🤩 ну приходится толкать его… 🚂🤏 😄 Спасибо за просмотр 🙏👍
Я пылесошу и чищу с ваткой с исопропанололом , раз в неделю. У меня много вагонов с пластиковыми колёсами, оставляют чёрные грязи 🤢 Спасибо за просмотр 🙋♂️👍
@@petrovichhrom9760 Да, очень хорошие там продают, ну Евросоюз поставил высокие налоги на импорт… Колёсики из Алиекспресс стали 3х дороже чем раньше… 😥 буду побольше чистить дорогу 🙂
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Beautiful video! Very nice locomotive! 👌
Thanks 🙏 🚂👍🙋♂️🇧🇪
Hi Erik, nice video again. Thumps up.
Greetings Andre. 😃😃👍🙋♂️🙋♂️🙋♂️
Hi Andre, I am glad you like it. Thanks for watching 🙏👍 Greetings, Erik 🙋♂️
Супер! Эрик, классные маневры!
Спасибо большое 🙏👍
Like 12 Excellent, have a great week, best regards
Спасибо за лайк и просмотр 🙏 🙋♂️🇧🇪
Cool! And very interesting
Thanks Ivan 🙏👍🙋♂️🇧🇪
Super 🛤️🚆👍 pozdrawiam
Thanks 🙏
Love it!
Thanks 🙏
Good test. I really enjoyed watching this video. Thank You Erik
Hi Dave, I enjoyed making the video too 🙂 thanks for watching 🙏 Greetings, Erik 🙋♂️
Nice loc and super stop motion with water crane. And you added a driver, I forget the driver in some of my locs😞.
Hi Arnaud, yes I like to add a little bit of stop motion 😁 Thanks for watching 🙏👍 Greetings, Erik 🙋♂️
Hello Erik, a nice presentation of your 0-4-0 locomotives, Greetings Kai👍😊👌
Hi Kai, thanks for commenting & watching 🙏 Greetings, Erik 🙋♂️
👌👌👍👍
Thanks 🙏
Great video as always, i like the little cars. Great review on the different locos and testing. 😊👍
These wagons are very old, made by Tri-ang in England. They are shorter than they should be to scale, but I like these shortened models, they are ideal on a tiny layout such as mine (1x1,5 meter). Thanks for watching 🙏👍
👍🤩🤩🤩
🙏👍🙋♂️🇧🇪
Hello Video klesse 👍👍👍👍👍👍👍👍👍 Thanks. Fim 🚂👮♂️✋
Hi Fim, thanks for watching 🙏👍🙋♂️🇧🇪
🤩🤩🤩👍
🙏🙏👍🙋♂️
Great run by Erik, i especially liked the red big diesel shunter scene. Cheers mate
Hi Martin, yes that 4-axle diesel was running super smooth, pleasant to see after all these faltering 2-axle locomotives. 😄 Thanks for watching 🙏 Greetings, Erik 🙋♂️
Hi Erik,
interesting! Thanks for sharing your loco exam and exploring!
Many regards
Brian
Hi Brian, it was great fun doing this test 😁 thanks for watching 🙏 Greetings, Erik 🙋♂️🇧🇪
I have a W4 Peckett myself. Also I love the TGK2! Next Russian loco I need to get!
That TGK2 is a great runner, sometimes it can stall at points, but usually it gets over them without problems, even on a low speed. Thanks for watching 🙏👍
Excellent video, interesting test, that’s a pity the locomotive needs to push
Hi Alexander, yes, it often needs a push. The wheelbase is only 2,5 cm, so it easily looses contact. I clean my rails before every running session, but even that is
not enough to have a smooth run. But it is so beautiful that I don’t mind pushing it 😄 Thanks for watching 🙏👍 Greetings, Erik 🙋♂️🇧🇪
Hi Erik, there are a few issues that can make these small 0-4-0 locos stall on points. Can I suggest trying to slightly loosen the screws holding the base plated to the chassis, I have 2 Hornby Locos that stalled easily on points and I found by allowing the axles to move a little more really helped as the wheels and axles in the chassis are very rigid. I f any of your track is slightly deformed then one of the wheels can loose contact and stall the loco. The other solution is to fit pick ups to a small wagon and wire it to the loco making it 6 or 8 wheel pickup. I did this to my tiny Hornby Pug and now it runs very slowly over all my points. The wagon can be made to disconnect by wiring plugs and sockets or permanently wired. Cheers, Paul.
Hi Paul, these are very good advices. Thanks 🙏 I will maybe try to get a Peckett B2, these are also cute and are 0-6-0 which should make them great runners, I think. On the other hand, I must try to moderate my passion for Hornby products, because collecting soviet rolling stock ánd British rolling stock all together could become a bit expensive 😁😄🙃🙂 Thanks for watching 🙏👍 Greetings, Erik 🙋♂️
Интересный тест! Насчёт Hornby мне кажеться что правильнее 0-2-0 чем 0-4-0 , если не ошибаюсь то среднее число указывает количиство рабочих осей, а их у модели(и наверно у прототипа) только две...может я ошибаюсь.. но етот паровозик очень подходит к вашему макету, жаль что нужно его подталкивать!)
Да, в Союзе указывали количество осей: 2-осиный паровоз 0-2-0. А в Англии указывают количество колёс то есть 0-4-0. Лучше бы одна система бы было конечно… 🤔😳🙃
Да, Peckett очень красивый 😍🤩 ну приходится толкать его… 🚂🤏 😄 Спасибо за просмотр 🙏👍
@@railway187 Спосибо за обяснение, не знал что в англии стандарт другой!
What brand of points/turnouts do you have on your layout? I find that my Peckett does not stall on Peco Electrofrog turnouts.
I have Trix C-track. Thanks for watching!
Добрый день!!!
А Вы рельсы чем чистите?
Думаю если почистить пути и колпары на локах все будет бегать без потери контакта
👍👍👍
Я пылесошу и чищу с ваткой с исопропанололом , раз в неделю. У меня много вагонов с пластиковыми колёсами, оставляют чёрные грязи 🤢 Спасибо за просмотр 🙋♂️👍
@@railway187 пластиковые колёса -беда
На алиэкспресс можно купить норм металические
@@petrovichhrom9760 Да, очень хорошие там продают, ну Евросоюз поставил высокие налоги на импорт… Колёсики из Алиекспресс стали 3х дороже чем раньше… 😥 буду побольше чистить дорогу 🙂
Отличное видео!!
Спасибо большое 🙏