Thanks. Would you nice if you tested after replacing the coils, so we know if the FPC connector was ok or not. Also would be nice if you can let us know of you hot air temp.
Hi bro ,can you recommend a course to learn how to repair iPhone up to your levels, I can replace small chips such as the iPhone 7 audio chip or even tristar, what I am missing is to know the basics to identify the fault and then perform a diagnosis independently .
My phone is working, I can charge it wirelessly, but not with cable. I have bought new port, but it still doesn't work. Would it be faulty chip or fuse?
I got problem with XR, when wireless is used it's disabling the CABLE. So when I want to use the cable I have to disconnect the COIL and the battery, then connect cable and battery. Maybe the WIRELESS CHARGING IC is thinking that WIRELESS Charing is on all the time or something. Will try new charging coil, maybe there is something wrong with old one as the rear glass was broken.
Now days I see you bro @ben you show us the alot of secrert never seen before about swap now I see the secret and tested works perfect hhaha iphoe 7/7 plus swap I failed most of the time but after to se your secret now BOOM back to life again after reball power ic when i remove cpu always I wasn't reball power ic that's why i failed no current but now I'ma master iphone swap I gotta the secret BOOOOOOOM Thnaks bro @BEN for secret we need people like you @secret share with others god bless you BOOM A10 AND A11 SUCCESS AFTER PMU REBALL BOOM
Hallo guten Tag ich habe eine Frage tschuldigung meine Handy ist iPhone XR Probleme aktivierst nicht Möglichkeit ich habe möchte repariert machen ich helfen Sie bitte mir
Can I mail my X in for the same job? What would this cost please? It shows green in charging but is not actually charging. All other aspects of the phone board is good. No water damage.
You make it look so easy. Your work is amazing. Every time I’ve tried to replace a chip I bump the capacitors and make a mess trying to get them back on or lose them I apply too much pressure to my tweezers holding them in place.
Thanks. Would you nice if you tested after replacing the coils, so we know if the FPC connector was ok or not. Also would be nice if you can let us know of you hot air temp.
Hi Ben, can I ask why you replace the 4 coils with 8? Thanks
Yes what are those coils? they look different
Not same caracteristics so i guess 2 of them egal 1 original, its just that
great job bro.👋👋 what temperature did you use to take down the fpc, 380 or less?
Hi bro ,can you recommend a course to learn how to repair iPhone up to your levels, I can replace small chips such as the iPhone 7 audio chip or even tristar, what I am missing is to know the basics to identify the fault and then perform a diagnosis independently .
It’s always nice to see videos of you Ben. Love to see your work art it’s truly amazing
Which component did u use to change coil boss
Dear
Your personality is very high and you are fantastic
Great work as always Ben 👏
I’ve got a an IPhone XR ,with wireless charging dosn’t have problems but with wire no charge. Any idea ?!
Great Work done
My phone is working, I can charge it wirelessly, but not with cable.
I have bought new port, but it still doesn't work. Would it be faulty chip or fuse?
hi where can i get these coils
charging is ok but what could be problam when charging bettry showing 0% reamain
What is the heat temperature you use to remove fpc?
Ben. YOU SAVED MY DAY! Thank you so much!
Hi! very nice video! which coil are you using to replace th old ones?
If u used one capacitor Can it cause any damages
I got problem with XR, when wireless is used it's disabling the CABLE.
So when I want to use the cable I have to disconnect the COIL and the battery, then connect cable and battery.
Maybe the WIRELESS CHARGING IC is thinking that WIRELESS Charing is on all the time or something.
Will try new charging coil, maybe there is something wrong with old one as the rear glass was broken.
from which iPhone can I put
Hi Mr Ben, Can u please send us link to buy theses COIL please
Now days I see you bro @ben you show us the alot of secrert never seen before about swap now I see the secret and tested works perfect hhaha iphoe 7/7 plus swap I failed most of the time but after to se your secret now BOOM back to life again after reball power ic when i remove cpu always I wasn't reball power ic that's why i failed no current but now I'ma master iphone swap I gotta the secret BOOOOOOOM Thnaks bro @BEN for secret we need people like you @secret share with others god bless you BOOM A10 AND A11 SUCCESS AFTER PMU REBALL BOOM
Hallo guten Tag ich habe eine Frage tschuldigung meine Handy ist iPhone XR Probleme aktivierst nicht Möglichkeit ich habe möchte repariert machen ich helfen Sie bitte mir
Bro plz help me my iphone XR charging problem can you fix this plz
How much does it cost!?
Your an expert. I hope to one day be as good as you.
i'm become crazy with XR charging only with wireless charge and 0A on with cable. What can do?
Good job master👍
Great work Ben.
Ben u are my mentor
Can I mail my X in for the same job? What would this cost please?
It shows green in charging but is not actually charging. All other aspects of the phone board is good. No water damage.
For sure. No problem. It’s 149 euro.
I love how Ben's microscope is always not focused haha
Very good,i have an iPhone X with the Same problem. I’m Going to change the coils,because i got the 5.1v pp_vbus_e75
Thanks bro 🤝👍🏼
More Phones Swapping Plz Ben Uncle
my Phone XR is like this, it does not want to charge or turn on?
Thanks sir
You make it look so easy. Your work is amazing. Every time I’ve tried to replace a chip I bump the capacitors and make a mess trying to get them back on or lose them I apply too much pressure to my tweezers holding them in place.
Me too.
Good djob
please spil u hot air sir
Bro plz help 🙏 I'm poor man
Wow, your work is good but you work too fast. Wish i could be at this level but dont have enough practice.
Why you don't like to show all of your job?
He takes the xr shield off with no problem... I blast them with 450 heat and max air and they don’t even budge lol wtf
Sometimes shields are glued ans u need to take it off or try to focus heat while turning around to not overheat
Take a little extra time to mix with leaded on both sides of the shield
I'm from Pakistan
🐐🐐🐐
You talk in English why can't you write in English for people to read? Or are you trying to balance it for everyone???