Resin heats up as it cures. The Copic marker details likely evaporated because you added such a thick layer after. If you try a thinner layer like the one on your test pieces you should be fine!
Yeah I was thinking it was because such a thick layer caused the problem as well. the test ones worked cause it was a lot thinner. it still turned out looking so pretty though~
I didn't test it myself but that's what I trought too. °^° A tinier layer will perhaps worked better. ^^ It's a pitty that everithings didn't turn out okay, but it was a first time after all, and mistakes can appended all the time. Well even so, it turn out pretty cute, I think. :3
Ya thats what i was thinking she could have just added a thin layer then wait for it to cure and then add a thick layer and that wont affect the Coptic marker
I really respect you for admitting when things don't go according to plan, and opening up about what went wrong. My daughter watches you, and by you being vulnerable about the fails as well as showing your wins, it helps her to see that even the artists she looks up to aren't perfect. Keep being awesome ♥
So I recommend doing thinner layers with the resin, I have done large resin projects before and got really concerned when you did a thick layer since in my experience too thick of a layer and resin can yellow, which I am very glad that didn't happen to you here. Liquid resin produces heat when curing, so your markers probably got messed up on the thick layer due to the heat and large chemical reaction. if you were to use copics on a resin project like this I'd recommend doing a thin layer before doing a thicker layer. It's still a very nice piece.
for the 1st try it looks amazing, I love the mermaid... for the next try I would love to see u try painting on more layers... I think (if I remember the video correctly) nerdforge actually added details after details in multiple layers, so if u loose details just add a layers and add them again :) at least thats how I would do it... also I can't believe how expensive Resin is in Japan... I live in Germany and definitely pay maybe half the price for, probably, the same amount... I, for one, did not mind the camera angle if it means u get better quality in the painting :D
I'm inclined to agree with this take...I think the key for this kind of project would be thinner layers of resin, and more of them...that way you can have the flat colors on a different layer from the shading, and the finer details on a different layer from that etc. I still think the final piece was lovely, though, and it was very cool to see it come together!
That is basically the idea yes. This sort of art within the resin is supposed to give a 3D effect. So while i already commented this separately, the jellyfish and the mermaid should have been their own layers. All the small details she added also should have been their own layers. But people who aren't versed with using Resin don't realise how time consuming it is with his curing time. So if Minori only had a week to make, film and edit that's not enough time. It would take weeks to do the art and layers properly to begin with, and would likely take a good week to edit all that filming down to her normal length video.
@@DandisDen this is true. In any case, I still maintain that she should have used thinner layers of resin…I felt the ones she was pouring were a lot thicker than what she needed, but that probably would not have lowered the cure time by much.
@@bardicfeline8360 Oh 100%. I agree with you there. Also, UV resin is also NOT meant for a project like this, at least not on that scale. Chloe Rose Art did it in UV and you can see why its not. It warped, and didn't properly cure, and was just a horrible mess. The art she did looked fantastic, and she did it right, just she should've used AB resin, not UV. I admit when Chloe pulled out the UV resin, i died a little on the inside.
Hey, I love this video.. I work with resin a lot as I make tumblers and other projects. 1st thing please invest in a respirator and nitrile gloves!!! 2nd you can use your paint pens you just missed a step. When you paint over epoxy you need to seal it we all use rustoloum clear spray add a few coats before adding the next layer of resin. If you want any other tips just holla x
Love this design! I have a lil tip for if you use resin again ☝🏻 When making a large layer, the resin heats up pretty significantly, which is probably why your details washed out. My tip is to work in small layers, and you only have to wait 12 hours to pour another layer if you’re not painting on it 🤘🏻
@@chaoticfrog8097 sister I myself am an Asian and I know that mostly Asian woman are really not too tall but I meant it as a compliment like. She is so cute and pretty like a doll. But yeah sorry if it offend anyone 😅
Maybe using acrylics over the dried poscas instead of the copics? I’m not sure but that’s such a cool project though!!!! And real bubbles sort of make it match the theme so it’s not the worst outcome!!! ❤️
This was still amazing, I love the 3d resin art people are making. Your mermaid was super cute/beautiful! Her hair was definitely a good length and style! If you try it again, for example, you could try doing a layer just for the jellyfish and for some bubbles etc, then do a new layer and do the girl on top, since you wanted her sitting on the jellyfish. It might turn out pretty neat that way.
I'm so happy you posted again and I don't mind that the canera angle is bad and I live how it turned out, also I hope your arms don't hurt for how many times you had to lift that up, it looks really heavy and thick as well, oh and I wanted to ask if you could do some art project with like tanjiro and nezuko or anything related with demon slayer bc I finally turned 13 and watched it and I love it! So I want you to do an art project about it 😊
Minori, u r so extremely talented. Even when u think u have messed up...it still comes out so beautiful 😍....I love this mermaid resin art. Beautiful 😍
I love it!💕Despite the colors fading and the wiggly lines inside( they actually gives it the water ripple effect) I would love to see more resin are and layers in the resin too.
You did really well on the resin art for a first time. A few critics that i've got, is the jellyfish and the mermaid should have been separate layers, and the details of the tail should have been its own layer. The point of the resin art like this, is to get a 3D effect. That's why many small layers are required.
I LOVED THIS!!! 💕The mermaid looks so adorable!!! The colours, concept, and art look amazing as always. The texture really adds to the underwater look. Great job Minori!!!💕💕💕💕
Hi Minori! I loved this video...🥰🥰I am loving your resin art more than any of your videos !? Will LOVE...to see you doing this again and yup! Was disappointed when the shading and all..faded away...🥺I was watching how you put the details and all it looked so.. awesome and was really looking forward when you put the top layer but then...NO WORRIES!! You taught us that we always learn from our experience and mistakes so...I am sure we are going to have another Masterpiece next time 👍👍👍
hi Minori! even though you were disappointed with how the details weren’t very visible, I think the whole resin painting turned out great! loved the video! ❤️:)
I love Nerdforge and I'm so happy you're a fan of them as well!! I can't wait to finish watching the video, I can tell it will be super fun and come out amazing!!
Wowwwww the mermaid is so pretty! And the extra textures definitely makes it so cool! Now we just need a name for the mermaid :D Thanks Minori you vids are super interesting and all of your hard work just makes your vid super cool!
This has been one of the most beutifull thing ive seen all my life!! I looooove the mermaid and her chunky tail. Everything was so perfect!! Loved this one!!❤👍❤👍❤
I really liked seeing you do this !! I hope when youre able you will redo this and maybe it wont fade the way it did here .. I felt sad when you said that not only b/c of your hard work but also b/c of the time & effort you put into it.. Not to mention the cost. If you want I think using some flakes of silver or gold (prefferably silver) would look awesome in your next try using resin. I think of dimension & texture. It could look more real with some sparkly accents and of course Amazon has all this for us. Thanks for sharing Minori !! Youre so artistic!
I would love to see you try this again, I actually really love your results! I know you were disappointed in your details disappearing, but be proud that you did something so inspiring and cool!!
The camera angle struggle is so real! There are so many times where I have to be bent at weird angles so I can see what I'm doing and keeping everything in frame. Sorry you lost the details of your drawing, it still looks amazing though! I'd love to see you make more of these in the future. You are going to get better and better with each one, just like your glass paintings!
For a first try, it looks great! Really lovely piece of art. You should proudly display that on your shelves behind so that we can all continue to enjoy it in your future videos!
Love your art piece. It's so good❤️❤️I'm not an expert but to make the mermaid pop even more,maybe you could've made the jellyfish a layer and the mermaid sitting on it an other. It would've look even more 3d❤️,not saying it's bad or anything. Love your art as always
OMG THIS IS SO BEAUTIFUL! You must have been so committed and patient while doing this. You are really amazing. It really made me sad to know that all the details you have put in this drawing with the copic marker is gone, but as you said we learn from our mistakes. Also l really like how Bay-max turned out. He is so cute. Keep doing what you do and l hope you are having a nice day. I love you Minori❤️❤️❤️.
Absolutely beautiful piece and honestly, I don't really mind the camera angle! I was still able to see you work, so I'm pretty happy with that! I love the idea you had going, and the final piece turned out so pretty! I do agree that if the finer details had shown up, it would have a more impactful piece, but I think the subtleties of your final version was just as cute. That said, when that full piece was on the turnstile, I was like lowkey panicking since I was afraid it was going to fall! It looks so heavy!! Actually, how much does it even weigh?!!
I would love to see you try this again, and you did amazing for your first try! It's truly so pretty, and even with the Copic marker issue, it still turned out really amazing!
edit: lol i just got a set of those jelly gouache paints too !! they’re so fun completely off topic but your care bears sweater is so cute!!!! so is the finished piece!!
The result turned out pretty cute, but I think maybe next time you could try making more layers of drawing between thinner layers of resin. You could've had one layer for background bubbles, then a layer with rocks or sand, then the jellyfish, and the mermaid's hair, then the mermaid, and maybe one more layer for additionnal bubbles, algae etc. Thinner layers allow you to repaint details if they vanish, and to have more control over the little bubbles in the resin. I saw someone mention Nerdforge's video, they did a great job with the resin painting! Other than that it's a great first try, your designs are lovely and I love your videos!
That was so cute!!! I think it turned out great, maybe you should do like a varnish to protect the paint next time!!! But I think it turned out great!!! I want to do something like that so bad but I just don’t have the space or time right now so I haven’t got to do anything my resin yet but Mabel during the summer! You are such a inspiration and gave me many good ideas for art!
Resin heats up as it cures. The Copic marker details likely evaporated because you added such a thick layer after. If you try a thinner layer like the one on your test pieces you should be fine!
Yeah I was thinking it was because such a thick layer caused the problem as well. the test ones worked cause it was a lot thinner. it still turned out looking so pretty though~
I didn't test it myself but that's what I trought too. °^°
A tinier layer will perhaps worked better. ^^
It's a pitty that everithings didn't turn out okay, but it was a first time after all, and mistakes can appended all the time.
Well even so, it turn out pretty cute, I think. :3
Yea when she was pouring on so thick i was cringing
@@Jjangbunbun but that marmaid drawing was good tho like when she didn't put a risen on that drawing but every one make mistakes soo it alright
Ya thats what i was thinking she could have just added a thin layer then wait for it to cure and then add a thick layer and that wont affect the Coptic marker
I totally understand the camera angle struggle. It's so hard to get a good angle and not have my head blocking the art, haha! Amazing video Minori!
yup
also! nice seeing you here again
Lol
Zzzz
i am avery big fan😄😄😄😄😄😄😆😆😆
I really respect you for admitting when things don't go according to plan, and opening up about what went wrong. My daughter watches you, and by you being vulnerable about the fails as well as showing your wins, it helps her to see that even the artists she looks up to aren't perfect. Keep being awesome ♥
Well hello their, fellow cal
So I recommend doing thinner layers with the resin, I have done large resin projects before and got really concerned when you did a thick layer since in my experience too thick of a layer and resin can yellow, which I am very glad that didn't happen to you here. Liquid resin produces heat when curing, so your markers probably got messed up on the thick layer due to the heat and large chemical reaction. if you were to use copics on a resin project like this I'd recommend doing a thin layer before doing a thicker layer. It's still a very nice piece.
for the 1st try it looks amazing, I love the mermaid... for the next try I would love to see u try painting on more layers... I think (if I remember the video correctly) nerdforge actually added details after details in multiple layers, so if u loose details just add a layers and add them again :) at least thats how I would do it... also I can't believe how expensive Resin is in Japan... I live in Germany and definitely pay maybe half the price for, probably, the same amount... I, for one, did not mind the camera angle if it means u get better quality in the painting :D
I'm inclined to agree with this take...I think the key for this kind of project would be thinner layers of resin, and more of them...that way you can have the flat colors on a different layer from the shading, and the finer details on a different layer from that etc. I still think the final piece was lovely, though, and it was very cool to see it come together!
Agreed
That is basically the idea yes. This sort of art within the resin is supposed to give a 3D effect. So while i already commented this separately, the jellyfish and the mermaid should have been their own layers. All the small details she added also should have been their own layers. But people who aren't versed with using Resin don't realise how time consuming it is with his curing time. So if Minori only had a week to make, film and edit that's not enough time. It would take weeks to do the art and layers properly to begin with, and would likely take a good week to edit all that filming down to her normal length video.
@@DandisDen this is true. In any case, I still maintain that she should have used thinner layers of resin…I felt the ones she was pouring were a lot thicker than what she needed, but that probably would not have lowered the cure time by much.
@@bardicfeline8360 Oh 100%. I agree with you there. Also, UV resin is also NOT meant for a project like this, at least not on that scale. Chloe Rose Art did it in UV and you can see why its not. It warped, and didn't properly cure, and was just a horrible mess. The art she did looked fantastic, and she did it right, just she should've used AB resin, not UV. I admit when Chloe pulled out the UV resin, i died a little on the inside.
Hey, I love this video.. I work with resin a lot as I make tumblers and other projects. 1st thing please invest in a respirator and nitrile gloves!!!
2nd you can use your paint pens you just missed a step. When you paint over epoxy you need to seal it we all use rustoloum clear spray add a few coats before adding the next layer of resin. If you want any other tips just holla x
Love this design!
I have a lil tip for if you use resin again ☝🏻
When making a large layer, the resin heats up pretty significantly, which is probably why your details washed out.
My tip is to work in small layers, and you only have to wait 12 hours to pour another layer if you’re not painting on it 🤘🏻
the pink strands in ur hair look really fun and cute!!
Her design is so cute! I don’t know how you design such cute characters every time, but you do!
minori your so talented , if you even make a stroke IT IS ART
Yeah she is so talented
Yes true
Exactly! I completely agree....anything u makes comes our so cute 😍
aww thx guys for all the comments n likes❤
I think it's definitely worth a round 2. Also, I hope to see more of this new character in the future! She's lovely ❤
Woow! I really don't know what to say ....I am SPEECHLESS!! Like minori is so talented and he voice is sooo calming ! I love her!!! REALLY!!!
I agree, minory is really talented and she has a beautyfull and calming voice, i love listening to her
@@katriencreatief9056 I know right!!! 😍And she is sooo cute!!like a doll!! 🥰😂
@@drawingpanda1881 uhh that's not really something you should say to someone... Especially someone who's Asian
@@chaoticfrog8097 sister I myself am an Asian and I know that mostly Asian woman are really not too tall but I meant it as a compliment like. She is so cute and pretty like a doll. But yeah sorry if it offend anyone 😅
Maybe using acrylics over the dried poscas instead of the copics? I’m not sure but that’s such a cool project though!!!! And real bubbles sort of make it match the theme so it’s not the worst outcome!!! ❤️
I love the character design of the mermaid and the colour gradient of the water
It is the BEST thing you've ever done. I loved it!! Please do it again!! It is PERFECT!! I'm sure everyone loved it💖❤
I love resin layered art.
In yours the 'cloud/foam' part came out very nice with the texture or clear resin and white.
This was still amazing, I love the 3d resin art people are making. Your mermaid was super cute/beautiful! Her hair was definitely a good length and style!
If you try it again, for example, you could try doing a layer just for the jellyfish and for some bubbles etc, then do a new layer and do the girl on top, since you wanted her sitting on the jellyfish. It might turn out pretty neat that way.
I really liked this one thank you Minouri for once again spending your time and money on us
めちゃめちゃ可愛い！人形ちゃんのお顔がいつものみのりんの絵柄より少し大人っぽくてすごく好み✨
This video deserves WAY MORE than 37k
I subscribed 💜
Congrats on 1 Million Minori! We love you!!!
That’s so magical! The textured pieces are perfect placed to look like the character is using magic to control the water around her! 😍
I'm so happy you posted again and I don't mind that the canera angle is bad and I live how it turned out, also I hope your arms don't hurt for how many times you had to lift that up, it looks really heavy and thick as well, oh and I wanted to ask if you could do some art project with like tanjiro and nezuko or anything related with demon slayer bc I finally turned 13 and watched it and I love it! So I want you to do an art project about it 😊
Sameee!!
Minori repainted a Nezuko claw machine prize not too long ago :)
💯
Camera but I agree to you!
Yeah
I love ur vids u are the artist I adore and u are my inspiration thank you for ur effort u put in ur vids.
みのりんの絵、とっても可愛いくて好き…♪☺
I Love the Artwork its so beautiful !💙
Minori, u r so extremely talented. Even when u think u have messed up...it still comes out so beautiful 😍....I love this mermaid resin art. Beautiful 😍
I love it!💕Despite the colors fading and the wiggly lines inside( they actually gives it the water ripple effect) I would love to see more resin are and layers in the resin too.
You did really well on the resin art for a first time. A few critics that i've got, is the jellyfish and the mermaid should have been separate layers, and the details of the tail should have been its own layer. The point of the resin art like this, is to get a 3D effect. That's why many small layers are required.
The fact that there's so many drawing materials In the background makes me wanna draw
I LOVED THIS!!! 💕The mermaid looks so adorable!!! The colours, concept, and art look amazing as always. The texture really adds to the underwater look. Great job Minori!!!💕💕💕💕
Minori looks so cutee and she is so talented
シェリーちゃんみたいなマーメイド姿の子がめちゃくちゃ可愛いー！！レジンのこのプロジェクトもまた見たいです😳😍
Hi Minori! I loved this video...🥰🥰I am loving your resin art more than any of your videos !? Will LOVE...to see you doing this again and yup! Was disappointed when the shading and all..faded away...🥺I was watching how you put the details and all it looked so.. awesome and was really looking forward when you put the top layer but then...NO WORRIES!! You taught us that we always learn from our experience and mistakes so...I am sure we are going to have another Masterpiece next time 👍👍👍
hi Minori! even though you were disappointed with how the details weren’t very visible, I think the whole resin painting turned out great! loved the video! ❤️:)
I totally agree with you, on camera angles, my husband builds models and he agrees with you. Love from shinjuku.
The kuromi hoodie from the sanrio video is so cute!!! It looks amazing on you
I love Nerdforge and I'm so happy you're a fan of them as well!! I can't wait to finish watching the video, I can tell it will be super fun and come out amazing!!
The pink strands are cute 😍
Omg Minori it turned out SO CUTE! I love it! Great job 💖
The character is so cool!! She needs a name for sure!! ❤️❤️Loved the resin piece ❤️❤️
I love the way you draw eyes, all of your characters and drawings are so gorgeous!
Yayyy another upload!! :D
Yay!!!
NEIGH!!!!
i am a big fan of your channel!!! :D
also i really like the pink bits in your hair!
Wowwwww the mermaid is so pretty! And the extra textures definitely makes it so cool! Now we just need a name for the mermaid :D Thanks Minori you vids are super interesting and all of your hard work just makes your vid super cool!
Ohh!!
And minori have coloured her hair pink☆☆☆😘
She is soo cute☺☺☺😊🤗
I really love the way you explain the video and then say the title . You are the best love your art .💜💜💜🤗🤗😊
This has been one of the most beutifull thing ive seen all my life!! I looooove the mermaid and her chunky tail. Everything was so perfect!! Loved this one!!❤👍❤👍❤
wow minori ! it looks incredible!i really love how you moulded the resin almost , ( to create the water texture) It looks so lively!
Wow! It looks so good! I think minori's art always turns out good and she always continues no matter what and thats why i love her!
@𝙲𝚑𝚎𝚎𝚔𝚢 𝚜𝚒𝚜 what?
You amaze me minori!! this is sooo beautiful!♡ I didn't think it would be this beautiful
I really liked seeing you do this !! I hope when youre able you will redo this and maybe it wont fade the way it did here .. I felt sad when you said that not only b/c of your hard work but also b/c of the time & effort you put into it.. Not to mention the cost. If you want I think using some flakes of silver or gold (prefferably silver) would look awesome in your next try using resin. I think of dimension & texture. It could look more real with some sparkly accents and of course Amazon has all this for us. Thanks for sharing Minori !! Youre so artistic!
I would love to see you try this again, I actually really love your results! I know you were disappointed in your details disappearing, but be proud that you did something so inspiring and cool!!
This was so so cute! Resin is expensive so this is like an all in project. I love all your art so much.
Minori , you design is so beautiful , lovely .
Remember.. Mistake is not a failure, it's just a practice! You did amazing I love it! And the most important thing is that you had fun!!! :D
The effort you put into your videos 😭 we don't deserve you queen
As a fan of yours, I definitely love that artwork! And you as an artist, i know you can make it more better on your next project
The camera angle struggle is so real! There are so many times where I have to be bent at weird angles so I can see what I'm doing and keeping everything in frame. Sorry you lost the details of your drawing, it still looks amazing though! I'd love to see you make more of these in the future. You are going to get better and better with each one, just like your glass paintings!
😍😍😍Love it🦋❤
I think it’s so cool and beautiful, would love to see more resin art
Gosh I think this is my favorite project and design of yours ever 😍
Minori makes my day soo lucky♡♡♡!!☺☺🤗🤗
For a first try, it looks great! Really lovely piece of art. You should proudly display that on your shelves behind so that we can all continue to enjoy it in your future videos!
She's so talented and entertaining. Hope I can draw as well as her!
They all look amazing, including the simpler ones🌟❄
Yay I’m early!❤️
And minori is back with another amazing video to brighten our day ❤️✨
Ty for the likes!
This has to be one of the most amazing projects I've ever seen you make. Sorry about the copic markers, but hey, you learn from your mistakes.
Love your art piece. It's so good❤️❤️I'm not an expert but to make the mermaid pop even more,maybe you could've made the jellyfish a layer and the mermaid sitting on it an other. It would've look even more 3d❤️,not saying it's bad or anything. Love your art as always
I really like your videos and it’s make my days
Supporting from Myanmar 🇲🇲
I am always in awe of minori’s work!
OMG THIS IS SO BEAUTIFUL! You must have been so committed and patient while doing this. You are really amazing. It really made me sad to know that all the details you have put in this drawing with the copic marker is gone, but as you said we learn from our mistakes. Also l really like how Bay-max turned out. He is so cute. Keep doing what you do and l hope you are having a nice day. I love you Minori❤️❤️❤️.
I would love to see more :D I think it turned out really amazing, but I am sure the next one would be even more perfect :)
this is the best resin art i have ever seen!!
A week of you pushing yourself to give the world joy. 😊
Need more of this, love your art videos Minori
I love when she says hey guys 🙌
Lots of love from Nepal 🇳🇵.
Absolutely beautiful piece and honestly, I don't really mind the camera angle! I was still able to see you work, so I'm pretty happy with that! I love the idea you had going, and the final piece turned out so pretty! I do agree that if the finer details had shown up, it would have a more impactful piece, but I think the subtleties of your final version was just as cute.
That said, when that full piece was on the turnstile, I was like lowkey panicking since I was afraid it was going to fall! It looks so heavy!! Actually, how much does it even weigh?!!
Every time minori says hi it makes me smile. Thank you minori!
You’re projects are so cute!!! You go girl!!!♥️♥️♥️
Cannot wait for your next resin project. Give your cute purple mermaid a name, Lila will be cute 😺
Ohh the painting turned out soo good!!♡♡☺☺🤗🤗🤭
I would love to see you try this again, and you did amazing for your first try! It's truly so pretty, and even with the Copic marker issue, it still turned out really amazing!
Your so talented Minori! Loved the mermaid picture!
I really love Minori's new hair!☺💗💕💓
minnori u such an inspiration too everyone...i love ure videos and look forward to them... keep shinning
How can someone be so talented and cute at the same time!😭❤️
It looks sooo good!I swear Minoriyou are really talented i love your content
Please DO MORE Minori 😊I REALLY REALLY like you're art work and hope to see more 👋
You talent is amazing. Even though it didn't turn out exactly how you wanted it to it still looks amazing. You free hand drawing is great.
edit: lol i just got a set of those jelly gouache paints too !! they’re so fun
completely off topic but your care bears sweater is so cute!!!! so is the finished piece!!
すごく可愛いです！
向こう側からこちらを覗き込んでいるようなデザインでもいいですね。
Yes please do it one more time - painting on resin. I really loved your mermaid and its so sad that all of the details got lost.
You draw so well! I really liked that mermaid anime!
The result turned out pretty cute, but I think maybe next time you could try making more layers of drawing between thinner layers of resin. You could've had one layer for background bubbles, then a layer with rocks or sand, then the jellyfish, and the mermaid's hair, then the mermaid, and maybe one more layer for additionnal bubbles, algae etc.
Thinner layers allow you to repaint details if they vanish, and to have more control over the little bubbles in the resin. I saw someone mention Nerdforge's video, they did a great job with the resin painting!
Other than that it's a great first try, your designs are lovely and I love your videos!
Omg! It's came out soooo gorgeous!😫😫😫
And yes i would really like to see it again!☺
That was so cute!!! I think it turned out great, maybe you should do like a varnish to protect the paint next time!!! But I think it turned out great!!! I want to do something like that so bad but I just don’t have the space or time right now so I haven’t got to do anything my resin yet but Mabel during the summer! You are such a inspiration and gave me many good ideas for art!
wow this turned out soo well... I AM IN LOVE...
Minori never fails to make another wholesome video
Omgg the effort!!! Slay minori!!
I really enjoyed watching the process!