Definitely going to get this for my girlfriend once she’s comfortable on a simulator. I fly helicopters and have a novice 4 as my fpv and this will be a great learning tool for my girl.
this model automagically changes 1S and 2S profiles depending on the voltage. the warning card was unnecessarily shipped with the TH 2. the manual sadly makes no mention of this.
Wounder if they'll ever make a conversion kit for for us running the Gen1 (TinyHawk) or Gen2 (TinyHawk S). Seems all that's needed is the cam & a new frame (compared to the "S" model that is).. Good quads regardless being witch ever one they may buy.
Thanks for the review. Just bought a few of these last month and can't wait to fly this tiny whoop. This is my introductory drone into FPV flying. i bought Emax EZ Pilot too but it will come in later... So this drone wil be my 1st FPV drone.
Bind_rx_spi cli command works on betaflight 4.0.x Bind_rx instead on betaflight 4.1.x Other... There is no need to switch pid profile manually... there is a feature called auto_profile_cell_count that set pid profile automatically according to battery plugged in ;)
No it does not have an onboard DVR. I recorded the video using the built-in DVR of my goggles. Some goggles have a DVR built-in. Here's an example bit.ly/EV800-D
If you are brand new to drones, then I recommend the following instead. It's mainly an indoor flier though as it has a hard tie fighting any wind. ua-cam.com/video/a5jXOosjO0M/v-deo.html
Anyone get "RSSI LOW " message and unable to fly it? Had mine for 2 days and then message appeared on emax tinyhawk 2 goggles it comes with. Now unable to fly at all
RSSI low means the drone is receiving a weak signal from the transmitter. Check the batteries of your transmitter, and also check the antenna on your drone. Was the tip of the antenna damaged by the propellers?
@@Quadcopter101 thanks heaps mate, no damage on the antennas. But since I couldn't fly anymore I charged controller, even though it was fully charged and then only flew the drone once, put it away and tried the next day. Miraculously worked today. So happy and thanks for your help.
Sir I love your videos . I would like to ask you how can i set up and bind my jumper plus to this tiney hawk there is no videos on you tube on how for us newbees or can you direct me to directions on how to or a how to video would be great
No you don't really need Betaflight. Here's another video that shows how to put the Tinyhawk into bind mode. After which, you will need to go into your Jumper and put it also into bind mode for the correct receiver. ua-cam.com/video/I2u3f_Vf3iM/v-deo.html
@@gavstreet8976 No I meant type "First" if you want a shoutout. The other guy who said First before you already has had a shoutout in a previous video.
Congratulations. You were first to say First (and who had not already previously won a shoutout). You win a shoutout in a future QC101 video. Again, congratulations!
And here is your shoutout ua-cam.com/video/zE-f-s2BXYQ/v-deo.html Only one shoutout per winner, as I'd like to increase the chances for everyone to get a shoutout.
Find it here and *use coupon code BGTHAWKII* bit.ly/THawkII
Can you tell me how to bind my jumper plus to this drone there are no videos that make sense
Definitely going to get this for my girlfriend once she’s comfortable on a simulator. I fly helicopters and have a novice 4 as my fpv and this will be a great learning tool for my girl.
this model automagically changes 1S and 2S profiles depending on the voltage. the warning card was unnecessarily shipped with the TH 2. the manual sadly makes no mention of this.
It changes pid profile, you need to change rate profile either
@@HerbertBrasil yeah that's what I said a year ago
Wounder if they'll ever make a conversion kit for for us running the Gen1 (TinyHawk) or Gen2 (TinyHawk S).
Seems all that's needed is the cam & a new frame (compared to the "S" model that is)..
Good quads regardless being witch ever one they may buy.
It looks like a great tiny whoop, I might have to give this one a try. And I will use your link if I decide to pull the trigger. Great review Jim.
You ARE aware that the props spin backwards, that's why the guard is on the top?
Thanks for the review. Just bought a few of these last month and can't wait to fly this tiny whoop. This is my introductory drone into FPV flying. i bought Emax EZ Pilot too but it will come in later... So this drone wil be my 1st FPV drone.
Awesome!
Is there a particular battery which makes the run time longer? Is there a drone that a longer than average run time?
Funny that you should ask that. ua-cam.com/video/MuVp-O3cNkQ/v-deo.html
Can you please tell what transmitter you are using, and maybe a few budget friendly transmitter options that will work with the tinyhawk 2? Thanks.
Hello eachine 1 or emax tinyhawk the best ??? For beginners thank you
Bind_rx_spi cli command works on betaflight 4.0.x
Bind_rx instead on betaflight 4.1.x
Other...
There is no need to switch pid profile manually... there is a feature called auto_profile_cell_count that set pid profile automatically according to battery plugged in ;)
Thanks!
How the hell do you keep the wind from taking it, I lost my drone in less than a minute
Thank you! Nice review and quality. Keep it up bro😁
Was that the stock 25 mw output power for the vtx?
So what kind of goggles where using? They looked like a nice set up
FXT Viper goggles. My favorite. They also include a built-in DVR to record the video ua-cam.com/video/PZ4hYALN9U0/v-deo.html
Make a video on how to maneuver and do flips
Great review of a great whoop.
Is it better than beta I wanna buy I'm new to this
The tiny hawk is a ripper unit. 👍😆😎✔👊🌟
He also rip one at 18:27 lol 😂🤣😂
Sorry I’m not sure if u said. But has this got on board dvr and/or is there another way to record
No it does not have an onboard DVR. I recorded the video using the built-in DVR of my goggles. Some goggles have a DVR built-in. Here's an example bit.ly/EV800-D
Quadcopter 101 okay thanks for the recommendation
Would you recommend this for newcomers in the FPV world?
If you are brand new to drones, then I recommend the following instead. It's mainly an indoor flier though as it has a hard tie fighting any wind. ua-cam.com/video/a5jXOosjO0M/v-deo.html
Does it change pids automatically when you put in 2s
Absolutely love the size . 👍
Great review
Great review :)
Anyone get "RSSI LOW " message and unable to fly it? Had mine for 2 days and then message appeared on emax tinyhawk 2 goggles it comes with. Now unable to fly at all
RSSI low means the drone is receiving a weak signal from the transmitter. Check the batteries of your transmitter, and also check the antenna on your drone. Was the tip of the antenna damaged by the propellers?
@@Quadcopter101 thanks heaps mate, no damage on the antennas. But since I couldn't fly anymore I charged controller, even though it was fully charged and then only flew the drone once, put it away and tried the next day. Miraculously worked today. So happy and thanks for your help.
I really must get one of these
The coupon code has expired it tells me
Sir I love your videos . I would like to ask you how can i set up and bind my jumper plus to this tiney hawk there is no videos on you tube on how for us newbees or can you direct me to directions on how to or a how to video would be great
ua-cam.com/video/gwKltefJBGA/v-deo.html
Can this be done just with the jumper or do I need beta flight
No you don't really need Betaflight. Here's another video that shows how to put the Tinyhawk into bind mode. After which, you will need to go into your Jumper and put it also into bind mode for the correct receiver. ua-cam.com/video/I2u3f_Vf3iM/v-deo.html
I set up the bind and one 2 position switch for arm and one 3 for flight mode but it still wont arm plese help
BNF version is compatible with all radios ?
Nope. Frsky 8 channel only.
Pretty fast drone 🚁💨
Hi there looks like a great drone too bad its a bad site to buy from I got ripped off by them first order I placed tooo bad love your video's
Lol do your grandkids know your playing with their quad? It's so little!!😂😂
Decent Little Flyer! 😁
It's Awangku Bahrin Pangeran Ahmad Tajuddin
PG = Pangeran = Prince
From the name sounds like he's from the Brunei royalty family.
Then I REALLY hope I pronounced his name correctly :)
No comments yet?
Nice
sweet
📝
Dammit
Can I take that as "First"? Hint... reply with First.
Quadcopter 101 ok lol sry for cussing
@@gavstreet8976 No I meant type "First" if you want a shoutout. The other guy who said First before you already has had a shoutout in a previous video.
Quadcopter 101 first
Congratulations. You were first to say First (and who had not already previously won a shoutout). You win a shoutout in a future QC101 video. Again, congratulations!
Wassup
last
🤣😂🤣😂18:27 really haha lol still LMAO.
7th
First
First
And here is your shoutout ua-cam.com/video/zE-f-s2BXYQ/v-deo.html
Only one shoutout per winner, as I'd like to increase the chances for everyone to get a shoutout.
@@Quadcopter101 ok.no problem
First
First