Out for a valley ride
Вставка
- Опубліковано 14 жов 2024
- Out for a ride with Ian with a changed rear sprocket for the hill climbs, a modified cross over in the right hand fork base valve and a poxy new/old front tyre.
Two stacks from two on the same rock and won't be using the MX33f as it isn't suited to the terrain I ride, even though a mate loves them.
My valving is good now for the forks and a tweak to the shock high speed compression adjuster had the bike working really well today.
Thats some nice single trail there mate. Have you tried playing with the tyre pressures and suspension to get more confidence out of that front tyre?
Not tyre pressures but the suspension has been dialled in for the area.
I ran 13psi in the 53’s and did the same for the 33’s.
I’ve got battlecross x31’s on now and 13psi seems like a good pressure on them so far.
Great vid, is that a 250 or 300? I didn't like the 53 front, it used to knife in a lot, the 33 seems to work better. looked like some good tracks too 👍
I’m on a 250 Philip.
I am also running tubes as the 53 was not so nice with the mousses i was running.
I found that 13psi is a good pressure for the 53 front.
No dunlops at the local shop so onto a bridgestone 31f which i used to love.
The 250 has had a Two Stroke Performance low compression head and ECU flash done too.
Loving the vids, I used to run Dunlop- but I’m loving the Michelin now
@@Dasfun-f5n starcross 6? I used the 5’s but they wore quickly for me. Good when they were new. The bike came with the mitchelin enduro 140/80 and i did like it to start with but the low knob height made traction tough in the pea gravel.
Yeah mate running the Starcross 6, and really like it. Similar to you I really liked the enduro 140/80 and the enduro steer- might even give the another go when it gets wet again 👍
Hey nice video mate, what type of clutch is that if you dont mind me asking?
I bought a clake clutch, One Light Clutch i think it’s called.
It was expensive but it can be taken to my next bike.
I was using a midwest engineering clutch lever which was good on my beta but the clake is next level easy.
The midwest lever is dependant on the clutch master brand.
@@Ridersofthelostpath Ah i dont mind the price if it feels nice and light, thanks for the reply
@@michaelr119 i had to buy the longer hose too as i didn’t want to then find the hose was too short when i got it.
A little bit of a pain to bleed it but been great ever since.
@@Ridersofthelostpath Ok good to know i might just get the longer cable as well just to be sure
@@michaelr119 i rang the bloke but the longer hose comes as a universal hose where it has the two banjo hose fittings for either 8mm or 10mm bolts.
He was pretty good to talk to.