Canon 70D | won't turn ON | Motherboard replacement | repair, fix | TakeApart
Вставка
- Опубліковано 10 вер 2024
- if your camera won't turn on....here is tutorial to change motherboard in Canon 70D ... of course before check all switches for bat.door and sd card door.if is death....
Canon authorised service will charge You over $500 to fix it .... here is something cheaper for You... for around $200 You can have used part and set of screwdrivers :-)
if You will be careful and you have bit experience You can do it by your self ! Get 80% off at NordVPN: go.nordvpn.net...
www.takeaparttech.com
FREE stuff: takeaparttech.c...
My KIT: kit.com/TakeAp...
Support Us on Patreon : / takeapart
Thank You and have a look in links bellow for parts or gadgets you need! :
70D:MotherBoard:
s.click.aliexpr...
70D sensor:
s.click.aliexpr...
70D shutter : s.click.aliexpr...
motherboard: s.click.aliexpr...
set of screwdrivers: s.click.aliexpr...
70D motherboard: s.click.aliexpr...
canon 70D: s.click.aliexpr...
came case 70D: s.click.aliexpr...
DJI mavic pro fly more : click.dji.com/A...
DJI phantome4 pro : click.dji.com/A...
DJI mavic pro : click.dji.com/A...
#takeapart #canon #canon70d
disclaimer:
TakeApart is not responsible for any damage on your devices or property caused by following this video, this video is informative only ! Disassembling, modifying or trying to repair electronic devices, gadgets is not recommended for untrained persons. Applying any liquid into or onto electronic devices is bad idea and you should never do so if you are not a trained professional!
Hi Guys ... it is really awesome to hear about steps of such big company as Canon to recall 70D with problematic PCB to replace it . Im happy to help and so thankful for all comments and likes .
Please Subscribe and share.. ..Thank You
take apart hi.. do you have a video how to open the view finder (eye piece) and fix the (green light) digital information inside (sorry I don’t what is the proper name) thank you so much..
hi, don’t have that yet... looking forward to do it...
thanks
Having same problem
hi there, feel free to follow video and all parts are linked in description.
first make sure battery, small switches near battery and sd card door are ok ,
thanks
take apart please make a video. Much appreciated..
Best replacement vid on UA-cam for the 70D. Thanks
+beyondbetrayal thank you for watching.
Had the same issue for Canon 70D (Err 80). All the repairs were performed free of charge by local Canon repair shops as part of Canon recall, not sure why this not the case everywhere. (I'm from Latvia)
hi, this video was created while ago... back then there wasn’t recall issued.
Thank you very much, this video saved me a lot of money!
thank you for watching, please don’t forget to subscribe...
This is the scariest crap ever. Making sure to reconnect everything exactly. What a nightmare....
+causbury that's why I made this video... good luck
thanks for posting this video because I need to change the motherboard in my own Canon 70D. I use it primarily for filming and so that's what I suspect burnt the camera put. I feel much more confident that I can do it :-) I'll let you know how I go , thanks again!
+Mervyn Stilinovic it is easy job! and no worries... don't forget hit like button... thanks
Just followed your video and replaced my motherboard. I followed all your instructions. Unfortunately the camera still didn't turn on but I suspect it was issue with replacement motherboard as I did every step to a t. When I first put a battery in the battery empty icon flashed on the screen, and then after that I got nothing at all. Disappointed that my camera is still not working but the whole process was allot of fun and I got to use my ifixit kit for the first time properly. I'll admit putting all the ribbon cables back in on the new board was very fiddly. Thank you for your help.
Update on this? I'm having the same issue, my camera is not turning on, just started today. I want to be sure its the motherboard (or relatively sure) before I tie up money into it..... thinking about just buying a new camera :/
1K technician confirmed it was the main pcb board or what I call the motherboard. I replaced it and still nothing. It's given me enough reason to upgrade and I've just got a gh5, selling my Canon and lenses and loving the new camera.
1K the part cost me $200, if technician fixed it quote was $980. More than what I paid for the body...
Bought a used one of these and turns out it doesn’t work. Camera shop told me it’s the motherboard and that canon would charge $400 to replace. So I bought the part and am going to attempt to fix myself. Really hoping it works!! Thanks for the video!
hi, happy to help
Bought a non-working camera and you didn't realise?
Hmm.
Hello, did it work?
@take apart My 70D is facing problem of a pink line on images. so should I change the whole motherboard r any thing else could be done?
@symmetry Angels there you can try sensor clean, because Im sure it is sensor problem... just try tonuse “sensor clean” option in menu of the camera several times... if no luck... you may need to change sensor...
thanks and let me know how you go
U mean if sensor clean doesn't work then I have to change sensor only?no need to change the whole MOBO? Coz a local repairer told me to change whole board.
if all depends on what happened to the camera... without seeing it is hard to tell... it can has damaged connector for sensor .... (usually humidity oxidation) but in perfect scenario is just sensor problem.
thanks
ok so I think I should go for sensor first. kindly post a reliable seller for sensor from china. thanks
hi there...I updated description of the video with new link for sensor.
here is it ...s.click.aliexpress.com/e/aAURjAq
I did some work with those guys...prety good quality and reliable..
thanks
Good one. pls add more. for lens reassembling flash etc., Thanks
working on it , thanks a lot
i was trying to replace the sd cardslot, however, after doing it and putting everything back together the camera now wont turn on. does anyone know why? Did i possibly damage something or is there something else i dont know.
hi, sd card door and battery door has little switch that detects if the doors are shut…. check them first
How hard is it to get to the adio/mic ports? Might need to do that on a 80d. Though the small board holding the ports on a 70d can be removed, not sure about the 80d though so maybe the whole main base plate needs to be replaced.
not 100% sure but it should be pretty much the same as 70D
thanks
Hi, I have a Canon 70d no signs of power I bought a new battery and when I try to turn it on there's nothing on the top and back display, how can I test if it's the main board or the Power board causing the issue?
Also there's no signs of water damage and corrosion
Hi , I would check first little switches next to each door(battery door and sd card door). it they closing circiut properly then it is main board…
PLEASE NOTE!!! In NZ Cannon are now doing this UNDER WARRANTY. Hi this is John from NZ. My EOs70D just died during video recording. Thanks to all the videos and comments - we realise that this is a defect in this model. If the first 2 digits on your serial # are between 00 - 22, then the camera needs an upgraded PCB. it is a fault that the motherboard gets overheated on LIVE VIEW - and the camera has an ERROR warning and then will not turn on. Send it to CAnnon and demand they fix it free!!!!!
hi John
thanks for your comment!
70D is on market for quite a bit time... not sure how many still under warranty!
anyway I would like to know more about your experience with canon , as Im based in NZ as well. feel free to flick me email.
thanks
I got same problem and camera not turning on again, not sure what to do, any suggestions will be appreciated
replied on your second comment... thanks
Please help me out with this❤️ is this the same with 80d and if so replacing the old motherboard with a new one straight out from the packaging from ebay, will it be ok? (the issue is that shutter is not working nor the display only the small upper lcd display works)
Hi, hard to tell… you can try
George Barroso hi I followed this video and my camera is turning in now but when I use the viewfinder it won’t even attempt to focus. I can only take pictures in live view mode can someone help me fix this please ????
Hey would you please help me, i got a Canon 6D Mark ii Motherboard, but it's not programmed. so the Software will be required after the installation as the seller told me, how can I do that? is it even possible? thank you in advance
hi, you can use it anyway.. the screen up top will display remaining shots as 999 .
if you want to set it up with the software... you may have to visit authorized service center.
Will this fix an error 80?
most possibly!
Good morning from Uganda, we have the same problem with our 70D Canon Camera, and it has totally failed
morning, plenty of canon 70d s has the issues... feel free to use links in description for parts and follow video.
@@takeapart let me try but its now one week and the machanic for repair and no results at all. The power is in the system but displaying on the screen is a problem. Thank you for taking us through let me follow your video you never know some magic may happen.
yes no problem, happy to help. if you need anything you can also email me. thanks
Hello. Best replacement video ever. I got a question. Is that heat tape important ? Because I don't have it.
hi , yes if you can just stick it back.
Thank you so much.
thanks for watching
my canon 600D worked properly but suddenly my camera not turning on. What's the region? please help me
try different battery, make sure sd card door and battery door os properly closed
hi, what exactly? did you try different battery? thanks
Thanks TAKAPART guy! :) I have a 70D with a sensor that someone ruined via a laser while I was shooting video at a comedy show. I just purchased a 70D from someone who has this problem and was told that the motherboard was out. My thought is to replace that motherboard with the one in my working (well... working but taking awful photos). Question.... Is it just the motherboard going bad that caused the non powering up? Or should I have to look into replacing the power board as well?
My Canon 7D gets on but it doesn't shows anything on Display, Repair guy told that few drops of water went inside n board isn't working... Is it possible that board can be repaired????
hi, I doubt it will be economical to repair… replacing parts is often cheaper and faster
@@takeapart so if I replace motherboard will the camera function like a new Camera??? Or it will be same before damage?
look Im not sure on the damage … you have to inspect it or take it to the repair shop .
I have a Canon 70d that won’t autofocus at all, often says that the lens won’t communicate with the camera, the light meter doesn’t seem to work, and the aperture is not displayed. Do you think that replacing the motherboard would solve all of these issues?
it sounds like motherboard… check out lens terminals, camera mount terminals, connectors inside and if all looks ok …. I would go for new motherboard.
Hello my dear friend, very grateful for your video and your help, the display of my Canon 70D does not turn on, the camera works but the display does not turn up, can you tell me what may be happening? Thanks so much.
hi, hard to judge.... go for it and open the camera ... check if ribbon cable disconnected it’s self.
hi, hard to judge.... go for it and open the camera ... check if ribbon cable disconnected it’s self.
hi, hard to judge.... go for it and open the camera ... check if ribbon cable disconnected it’s self.
@@takeapart Hello my friend, I did as you said, I found the problem, there is a broken micro wire from the cable that connects the display on the motherboard.
@@takeapart Thanks a lot for show how open the camera, I'm glad for this. Best wishes my friend. 🙏🙏🙏
Hi, I have a problem with the sd card insert area, please contact me
hello, please check info tab for my contact details
@@takeapart Do you have Instagram to send you a picture?
sure @takeapart_tech
thank you for this high quality and very specified video . can you tel us how to change the shutter in this canon 70d . and where to find the shuttet , i m from lebanon
hi, replacing shutter box in canon is for longer video:-) it is difficult and its require setting focus and sensor distance...
I changed description of video, You can find link for buying 70D shutter.
thanks
Hi. Does DSLR camera have any power sugre protection inside the body? I am just curious. For example, let's say I bought a new lens to my DSLR, but with damaged electronics. I put it to the body and .... the camera is damaged. It is possible?
hi , cameras are good at protecting but nothing is 100% ... I you know the camera is damaged why would you want to attach new lens?
anyway thanks for watching
Can you repair canon 70D focal plane issue (takes crisper focused shots in live view but blurred shots when shot by eye piece for same.settings including autofocus). Many people have similar complaints but I don't know where get it fixed. Here in GCC countries the canon service has bad reviews.
Can you please help.
Thanks.
well there is way to do it ... literally eyeball it but easiest way is to send it to canon ...
Sir ji good evening my camera top damg new top above hai
hi , follow steps in the video.. top part is easy to replace and even easier to order... links are in description
thanks
my camera cannon 1200d not on..whats the problem?
hi, hard to tell... I have to inspect it .
Could you please tell me if the heat tape teared up is this a big trouble If I film a lot?
hi , hard to say .... that tape definitely helps a bit but over the time it’s getting worse in quality anyway ....
thanks
@@takeapart Thank you! Appreciate your fast response! Replaced motherboard successfully in 30 minutes or so! Many -many thanks to your effort!
thanks for watching Nick ...
Hi! This is also my problem . Can you help me also dead set on my 70D
. please notice me 🥲 should i buy the small piece that you pop on the board?
hi, Im not 100% sure what you after...
Canon 700d camera viewfinder blur problem.pls can you upload video or share any link for me ?
it is tough one! you can set it up by adjusting viewfinder piece inside... front and back cover has to come out...
just to make sure: you have set diopter to your needs right?
thanks
my canon 70 seems to heat op really fast and cd card inside is also than heated up fast.how can i solve this issue?i know that all dslr heat up at one time.but i feel my canon 70 heats up to reapidly in video mode.my previous canon 700D didnot heat up that rapidly.thx
+robin reso hi, it is normal for 70D .... once it became dead you just follow video and replace motherboard... thanks for watching
+robin reso hi, seems normal to me ... if you don’t have random shutt offs or other issues... don’t worry
thanks for watching
hello friend I have a 70D with error 80, with more than 3 years with the damaged camera, I would like to know if you can help me with the part number and with a seller that you know that sells this piece that is reliable and of good quality, I remain Attentive to your answer, grateful in advance
hi, yes it is something unbelievable canon 70D has that kind of issue.... but it’s easy fix!
follow the video and for the parts you can use links in description of the video... they are sellers what I always use...reliable and parts are in excellent quality!
thanks and if you will need any help please let me know...
thanks for the help you give me, by chance you know how many shots and videos the recommended mother board is designed for, and if the error that brought the original and known error 80 was corrected, I would like to take preventive measures and inform me before buying a generic one.
are 3 years damaged recently bought, it's a disgust I want to repair it to sell it immediately, unless you tell me that it will work perfectly and that it will support a lot of photographic record and videos, your answer is very important for me, so I am grateful in advance, greetings brother
hi ,
you will not find brano new motherboard... most of them are sold as 99%new . they are ok with minimal use . as new! that’s problem is in chips soldered on motherboard when camera overheats and it’s damage connection between chip and board. for canon is not economical fix. but you can replace motherboard and get it working again.
Could you repair/adjust the focal plane of CANON 70D .
It takes good and crisper images when in live view shooting but blurred shots when using eye piece shooting for same settings (including autofocus mode).
There are many complaints but I don't know where to get a fix. (Canon service in GCC countries have no good reviews so I need your advise / help).
Thanks in advance !
thanks for watching
AFTER I REPLACE THE MOTHERBOARD OF CANON 70D WITH ANOTHER USED BUT IN GOOD CONDITION ...IS ANY OTHER THING TO DO I MEAN DRIVERS AND SO ON OR I INSTALL IT AND IT WORKS...MANY THANKS...ARIS HELLAS
hi there...
it will work just fine ... however there is special software to flash mobo... otherwise you will have picture count on 000 and some details in camera info will be not readable
(shooting, video... all working just fine )
thanks
I have a canon 80-d in which the video gradually started acting up and now wont work at all. Also the various buttons are sporadic even though I can take pictures--its brain is near death. I am desperate as I am 66 just getting by on SS and simply cannot send it in and be give a bill for more than the value of the camera to get it back. Do you think replacing the mother board like this would be good odds of fixing it?? any advice appreciated and I wont hold you to anything but I need to do something-money is short I cannot shell out $1000.. thanks
hi Jeff
motherboard. butons ... it soutto me like water/humidity damage... try to replace one by one and you see what will help. yes canon repair is expensive... is better to have good content insurance for situations like this.
thanks
What if I broke the microswitch in where the battery cover is. Can it be replace? it doesn't connect to the motherboard right?
+DL Media hi, if you have a friend who is good in micro soldering then yes it can be replaced... otherwise cheaper and faster is replacing motherboard.
thanks
take apart so let me confirm. Is that micro switch dose sit on motherboard? I was afraid that it sit separately
+DL Media oh yes sorry my mistake... it sitting on different board...
If I need parts to repair a sl2 where could I order them from, thanks in advance
you can use links in description and contact sellers directly... they will create aliexpress listings for you ...
Hi Can you tell me what size JIS phillips head I need so that I can buy one in the US?
hi Chuck!
let me double check that for you... will get back soon... thanks for watching
Great video sir. I have a question. When we change the motherboard to the new one, do we need to do any adjustment or calibration ? Does the board comes pretty calibrated from the factory
hi, it really depends on where you getting board from... if it’s from used camera then is good to go ...
@@takeapart what software is used to do calibration. I m buying a new board
software isn’t available to public... better to ask supplier ...
If you change mobo by an used one,it will work by using LV,but Af will not work perfectly (or not at all) and the color will be a little different...each mobo/sensor need calibration data for working Af and color calibration...
My 70d has bumped bottom 😁....on place were is tripod mount it is not flat. Do you think is possible to fix that?
hi there
it is hard to say without seeing it... send me pictures on email in info section.
thanks
Thanks for posting this. I'm in need of replacing this board as my USB port is shot. Obviously I wouldn't do this outside, but, are there any big issues with dust getting in while having the case open?
+thisdoesfine hi, bit dust is not a problem...but if you want you can use some cover for covering back of the sensor while you making ready new MB... thanks for comment and hopefully it will help you...
It did help. Now just to find the board for a good price :)
+thisdoesfine In my case was good one from aliexpress.... (link for MB in description) pretty quick delivery and best price .... also if you use one of my links for purchasing products it will help me to create more videos like this... thanks
+thisdoesfine Hi hopefully you sorted your camera... let us know about process
thanks
take apart hello, how fast did the motherboard get delivered? And which delivery type did you choose???
George Barroso, você faz essa reprogramação?
I swapped out the board on my 70d, camera now switches on and takes images, but the viewfinder is blurry (diopter doesn't fix it) - It flashes red when focussing and it will not show grid lines, level etc. Any ideas?
hi there... there is many options. where did you got board from? did you removed viewfinder unit when changing board? what about screen? it focuses ok when screen on? thanks
take apart Thanks for the reply. Bought the screen from eBay from a used camera parts store. Didn’t remove the viewfinder or screen. It takes pictures fine, but the viewfinder is constantly blurry. If I switch it to live mode, the picture is clear and in focus.
you meant board? from ebay?
it is tough one... if you not tried to tighten sensor screws or play around with viewfinder unit it must be board. thanks
Hi, My 70D is showing only err 01 with all the lenses that I have and the Aperture is at 00 and Manual focus...
Whenever I press shutter it shows me err01 connection between camera and lens faulty.
Took it to services but they said i have to change the Motherboard... do you think it will do any help?
+Zaber Ansary hi, that was exactly my problem... check the terminals between lens and body if all ok .... yes it is on 98% motherboard!
thanks
take apart how much do you think would cost to replace the motherboard? also could it be the Clock battery inside
or the body's lens connector pins?
Cuz if I don't mount the lens all the way, It works just fine, All Manual Focus, Only no aperture control..
Can shooot video normally too..
The Shop I bought it from said that it will cost around $130.
+Zaber Ansary hmm good question... motherboards from china(check description of the video) are around $150usd and than someone has to replace it.
clock battery will not cause your problem,
only pins or small components on pins flexi cable inside of camera body!
clean pins and try but most likely it is motherboard!
also you can try turn of camera (with installed lens) while you hold shutter button... also reinstall battery while holding shutter button... etc.
I remember my canon 70D sometimes worked fine after this kind of hardcore restart.
thanks
hai sir, no programming needed? I tried to change my 1000d mainboard but the shop that sold the board said that need to program the board? is it ? thanks
+Magic Jadoo hi, if you brought second hand board than it will work! if is brand new you need to use specific software for set the board up... otherwise it will be always on ,even if on-off switch is on off position.
thanks
+Magic Jadoo btw not many places can sell brand new board... they probably just want do the job and charge you more haha ...
My nikonD3000 wont turn on plss help me
I didn’t had nikon for fix yet ... try the obvious things first... battery, compartment dooors ...
Hi is there a switch for SD card slot? If so can you show how?
yes sd card slot has switch! you can access it (look around sd card door)
hi mate, my 70d completely died, bring it to the service center they said it cost $400+ and then i suddenly broke the battery microswitch, so if i bring it to the canon service center can they fix the microswitch too? thanks!
hi there,
yes all can be fixed...they will probably replace board where the battery microswitch is located.
normally canon service charge much more....if you got estimated cost $400 ...for motherboard GO for it ....you may get some warranty too.
otherwise grab one of motherboard from china(and board with battery door switch) and do it yourself .
thanks
thanks mate appreciate that! Im broke with that +$400😭
let me know how you go... thanks
take apart rip😭 they said they can’t fix my 70d, it just rip thats all
Where can I buy the Main Board? I have seen them in Aliexpress but I am not sure about the quality of them and they are around 200 EURO (€). Besides, do you know if the lenguage of the camera is given by the Main Board? Because in that case, I am not probably find one in Spanish if I buy it in Aliexpress or Ebay.
Thanks.
hi,
I did order few from aliexpress and all of them was fine... they are by default in english ... links in description of video will transfer you straight to shops in aliexpress pick by me ...with great feedback and reviews. thanks
take apart Thanks for answering fast. Is not possible to find them in Spanish?
We saw your links. However, they are sold out.
take apart Is necessary to change all the pieces you mention in the description or just with the Main Board is enough? Thanks.
take apart And what is that "black tool" you use to remove the flexible cables? Thanks
they will be in english... but easily changeable to spanish in menu...
they will renew stock soonish ... also I will update links in description today (within 8hours)
I can't get the main board tabs will not stay down (lock) on the connectors when putting back together. Has anyone else experienced this?
hi, ham I have no experience with your problem... check if flexi cable is properly in and should all be ok.... thanks
Hi again! ;)
I bought the items you told me and I have exchanged the Mother Board. The good thing is that now I can turn the camera on. However, after a few minutes recording video, the camera gets frozen... the same thing happened before with the original Main Board...
Why is this happening? What could I do?
hi, it might be problem with sd card if it’s slow or failed they can cause slow working or even freeze of the camera.
I would try good sd card .
let me know how you go...
take apart I don't think so, because I bought the SD Card on pourpose.
It is a 32Gb SanDisk Ultra, which works at 80mb/s. It is a SDHC I, Class 10
ok that’s good..... it’s great fast card. !
it’s hard to tell what else can be wrong.... try to inspect all boards and look for corrosion or oxidation.... they are not any more processors so if you find something feel free to clean it wit iso alcohol and gently brush with soft tooth brush . (its hard but as 70D is not weather proof it is possible water damage ir high humidity problem)
thanks
take apart I have checked it and nothing is oxidated or something similar... I am really disappointed and desperated 😥
it can be problem in new motherboard... I would try magic lattern and see if it’s freez .
is changing the motherboard resets shutter count to ZERO? Im about to send it to a repair shop for motherboard replacement..and it says new board zero shutter count..
+Janine Cordova hi, if they using proper software for pulling all information from camera and putting them back then should continue... if they not using the software just don't pay for job too much... ;-)
Replacing motherboard did not solve my issue (dead 70d). Before replacing motherboard - I had replaced the power board - but my old one was installed again since the replacement did not change anything. I have also checked all the switches - and they look just fine - in fact everything looks fine - and the camera looks stunning (as new). Do you have any clue at all - what then can be causing this fault? A hint mentioning what to look for would be swell. If it has something to do with one or more flex-cables - what do I have to look for? Furthermore can a faulty motherboard have caused a "blown" fuse on the power board - so that both actually have been defective?
i know its been a while but have you found a solution?
Where are you from?
I have been watching this video again and again. It's so interesting. Thanks for your good work.
I have a 80D that I need to replace the rear multi-controller set button knob. I couldn't find a tutorial to follow. I need a service manual of 80D. Where to find it.
hi there
it is hard to find any manual for repair dslr camera ...
changing the button can be tricky .
where about you based? I may be able to do it for you.
thanks
Toronto
bit far... did you have replacement part?
I have just email Canon asking for availability of part. Part is available on eBay but it takes a month or two to arrive.
check channel info and send me email with picture of damage ...
Just change the faulty M04 power ic
I have heard about that component before however in time this video was made there wasn’t info about it. thanks for watching and your tip!
could you repair my EOS 70D?
hi, for sure!
Mine also dead today kindly help me to solve error 80 i dont have warenty now
hi ... first check all around... look for cheap solutions... if it’s constantly off- try battery door, sd card door , swap battery , try to detach lens.
if nothing helps... then is time to follow video ...
@@takeapart i already check all swtiches but how to get new board it too costly and not available in my country pakistan
then is time for ne board! unfortunately you need to contact the seller and ask-probably pay more for shipping to your country.... they may help you
@@takeapart i dont have new mother board in this video you just replace new board to it do u have other solution to repair that board ic which is defected or other solition
unfortunately it is job for micro soldering... expensive even more unless you have friend who will check and fix for you.
as the motherboard is one unit it is cheaper and easier to replace it.
highly recommending for you... just get in touch with sellers on aliexpress and try to get one .
thanks
If I replace it with new board, does it need to be program again? if Yes, How? Thanks!
+Janine Cordova hi, the answer is Yes and No ... if you get used board it can be used in another camera however it will not show some info as pictures left, etc... if you getting brano new unused board ... then Yes! brand new boards will keep camera on even switch is in off position.... some camera shops can do it ... special software needed!
thanks
Okay great to know. thanks a lot dude..Im so disappointed with canon70d...is your camera still working?
My nikon D5100 fell from my hand.
Now it is showing some pink green lines when taking photos. Old pictures I can check they are clear so this is not a display problem. I changed the lens but it is the same. So I guess this is not a lens problem either. So can you help me to identify what is the main problem
hi there, unfortunately it’s sounds like sensor damage.... not sure if you can refresh pixels in menu of the camera... you should dig in menu and find something like sensor cleaning or poxel refreshing... or try google...
sometimes it’s help to get rid off lines...
thanks
take apart thanks
did you fixed it?
I will check and I will let you know. Thanks
Hi Take Apart,
First of all, thanks for your video. I've just tried changing my board and I'm pretty sure I've done it correctly. However, still no sign of life when turning it on :( :( :( I'm trying to debug a bit here. Do you know if you can turn the camera on without connecting the back panel? I'm worried about my battery door micro switch as well. I don't think it's properly connected to the "power board". Do you know if the switch does anything but shortcut (or disconnect) the two pins when being activated? Do you know if there's anywhere on the board I can check whether the motherboard is being properly power supplied?
Thanks!
hi ...
there are two small micro switches one (battery door) second ( sd card door)
you can measure if they close the circuit properly (sometimes corrosion inside the micro switch cause problems)
where from you got your mobo? make sure all connectors are properly plugged in and locked.
let me know how you go...
thanks
Hi again. Thanks for your reply. I got my mobo from aliexpress - took me 52 days to get it, so I was pretty excited to try it out. I reconnected everything once again and felt really comfortable about it, but nothing happens when turning it on :( Afterwards, I was trying to check if the mobo even got power supplied and what's even worse: While I was trying to measure the characteristics of the battery door switch, the switch fell off :( The battery switch is on a different board, as you know - and I don't know how difficult i would be to change that board as well? Have you ever tried that? From what I could measure, the switch BLOCKS the connection between the two pins, when the door is CLOSED. So theoretically, I would expect that the camera now thinks that the door is closed all the time (?). Any suggestions?
Please help my Nikon l340 camera turn not on.pls pls help
his there... it is tricky! check all small switches around battery door and also check if you have juice in battery... connectors ... and try
what happened last time you used your camera?
I am try bat not work.. Pls help
it is hard troubleshooting over the message, what happened last time you used camera?
WHAT IS THE BRAND OF LIGHT??!??!?!?!??!?!?!? PLEASE TELL ME ...
light?
@@takeapart sorry wrong video....
all good
Where can I learn to repair cameras i would really love to do so ♥️✌️✌️
hi, I working on my patreon account... I will share basic as well as advanced techniques of repair... every support is appreciated. thanks
What is the reason why the motherboard would fail?
Great video by the way!
mostly overheating in video mode ….
thanks for watching
@@takeapart Oh gotcha, yeah I used the video mode a lot more than for taking pictures. I'm then guessing it's more for photography than videography.
I appreciate you responding to my question fast.
what is the price of canon 70D motherboard ? in USD or PKR ?
usd thanks
How it cost for mainboard 60d?
hi, they recently went down … I remember paying over 200bucks 7years ago . today maybe like 20-80
@TAKEAPART thanks a lot sir.
no worries! thanks for watching
products links are in description
Sometimes my camera does turn on, when I'm inserting and unplugging the battery and sd card, and after that, if I leave my camera for about 7-10 minutes it will not open again. I have to do the process over and over again just to open my dslr. Does it mean I don't have to change my board?
+TOP 1 FAN it depends... maybe you have faulty small swivh under the battery door or sd card ...you need to investigate more... try to press those switches manualy with piece of paper or something soft to avoid damaging them. if they working ok ... your problem will be motherboard.
thanks for watching
+TOP 1 FAN hi most probably it’s motherboard issue... thanks for watching
+TOP 1 FAN most likely YES, however first check small micro switches near sd card door and battery door (once you disassemble camera) they can be damaged.
thanks for watching
so the motherboard is supposed to just pop out? you don't show how to take it out after the screws are out, for yours it looks already popped out.
hi, screws holding mb on place... after removing screws mb is free...
Were you getting the Err70 and Err80 before your 70D died?
+CIRUS MEDIA hi, no errors just went off and never come back.... it is pretty common thing with those big CPUs on motherboard they are overheat and damage it self...I would say canon need to improve this asap! motherboard replacement needs to be done even if you broke or bind contacts in sdcard slot, ... the guys for "micro" soldering charging way too much... easier and cheaper is to buy a second hand motherboard...
Ok, thanks for the reply.
I also have a Canon70d that is not coming on. I was getting the err70 and err80 errors and my camera was freezing up.. now it's dead and does not turn on.
I will order this part and attempt to replace it myself. Thanks
I was getting error 80 suddenly and contacted canon service center. They replaced mother board. Exactly same thing what is shown in this video. I think 70d shipped with bad boards as i am seeing so many issues mainly error 80. When I told the same, they said they haven't heard those many cases.
I ended up paying around $200 (in INR) as it is out of warranty. My usage was very minimal.
+Sudarshan sridhar Hi, yea they are great and bad cameras.... I would say overheating is damaging internal chips on board... but what to do ? video footage =heat
thanks
+CIRUS MEDIA great , links in description of video are I would say best and reliable sellers... thanks
Where do i buy a motherboard cuz
Hi , aliexpress is the place .... links are in description
Dude, where can you get mother boards in the U.K. ? Does it need to be from Alibaba?
+Chuck Norris not many on market now.
I found the link in description still working and seller from aliexpress has few left.
and is place where from was my one!
thanks
take apart
Hi did you have to program this one u bought from Ali express?
What's the tool you are using ? Where to buy one ?
hi there
set of screwdrivers with plastic sticks
in description of video is link for “set of screwdrivers “ you can buy them
thanks
The link doesn't show your magic stick. JAKEMY JM-8101 32 in1 ?? Thanks
oh yes that’s strange... well will send you link for exactly same as my one... in few hours. (with magic stick)
thanks
hi man ...I tried to find my set but it seems like it is no longer available ... you can buy that set listed in description ...it is good quality ! and find just some plastic opener usualy for smartphones ....and get that as well .....
thanks
Thanks. Just found the same item online. Less than $1 each. Nice
"👍
thanks man
how we could replace the back scroll wheel please?
+Pierre Augustin hi you need to open the camera same way and then working on back panel... it is easy ... thanks
I recently sent my canon 70D to a service center. I think this is very easy to do if they can send me the parts needed I'd do it myself because of this video! thanks for the vid! I got the infamous Err 80 on my 70D. what do you think they'd replace?
+Jan Raymond Cortez hi first thanks for comment... errors on 70D are 95%motherboard problems... rest are sd cards ,lenses and batterys fault... I'm happy, when my videos helping solve others problems...
How to Repair Canon100d motherboard??
+H I Emon unfortunately I didn’t had 100D for motherboard replacement... but it should be straight forward as well.
thanks for watching
Hi. Thanks for the video. After changing the motherboard, no need for some kind of focus calibration or similar? Working perfect?
+Rethink Image
Hi , and No you not removing any part which will affect the focus... for motherboard you need special software to adapting new board ... (but not necessary if you using used one) it will show 999 pictures left. ;-)
thanks
So, for this particular board, which you purchased used, did you use software or used straight after replacement? Thanks!
+Rethink Image
it was used board... so I installed it without software... just straight replacement... thanks
Mujhe vi chahiyw plzz
english?
Who’s that Chinese lady screaming in the background?
hi, haha that some singer…. thanks for watching
NB - Forgot to mention my batteries. I have 4 - and they all works in other camera - so they are not causing the issue with my camera.
go for flexi cables and connectors.... small have a look for any dirt, body hair ... dust... clean and blow with comprest air... make sure they are properly plugged in...(some of them are tricky)
especially connectors on top right corner and behind the motherboard.
let me know how you go.. thanks
Thanks.
I have now checked cables and connectors - and did not find much.
However I did find that a red wire close to the power board is exposed since I'm able to see the copper inside the wire. Not much though only 1-2 mm of the copper is visible 5 mm from the connector itself (the wire is attached on the power board). Apart from that it seems that the wire is ok inside the connector. The wire is one of a pair (the other one is light green/or grey (not easy to see because they are very tiny). I don't know if it would be possible to replace the red wire - but maybe it would be worth giving it a try. Or do you think it would be possible to find it as a spare part as a wire-set with connectors???
👍👍👍👍👍👍👍
✌️✌️✌️✌️✌️👍👍👍👍👍
what is the price of a new board??
around $180 usd ... you can find reliable and pretty fast chinese suppliers in description .
thanks
take apart tanks for your kind information
no problem... do you have canon 70D ?
take apart no I've nikon D3000
and you after board for canon? or your nikon?
Thanks For the video, it was very informative to get used of 70D internals...
I burned sensor of it with laser btw , and found brand new sensor from aliexpress...
Could you give details about how to install it properly?
Are there any type of distance calibration needed?
Or i should just put the sensor to the place of old one?
+B. Y. hi, it is bigger job than motherboard replacement... ! hopefully I will get canon dslr for sensor replace.... and I do video about it .
thanks
I have the same problem, could you repair?
Mine still won't turn on
did you changed MoBo? check out two small switches near battery door and sd card door. thanks
Yeah changed out the motherboard. Two small switches seem to be fine but it's still not turning on
well sorry for late reply... I had once similar issue ... some of the connectors for flexi cables can catch some body hair or any kind of piece dust ... also double check connectors on top right corner of mobo there are some tricky ones that needs to be plugged properly.
let me know how you go
thanks
Wery nice br
thanks for watching
Canon sucks. I've bought a Canon 80D and after using for just one month I put It away for a couple of months and when I try to use It again It simply doesn't work due the error 80 and error 60 (yes the same error of the 70d). And the best part is that Canon kind of said to me "shit happens dude" and becouse I got my camera abroad I don't get to have any warranty repair and had to pay $500 to have It working again. Great custumer service Canon, just great.
+Bruno Dittert hi, and yes they has serious issues with motherboards.... but I think 60D was last pretty solid model... I know the autofocus was different but for videographers who using manual focus just good! anyway I recently switched to panasonic and it is bulletproof!
thanks for comment!
Bruno Dittert agree! I got 3 of this camera (70d). All dead for no reason. Canon wanted to charge me $450 for repair each because they died after a year of use, out of warranty . Also told me " it's not a known issue". Im so P. O. I did the repair myself on 2 of them . kind of simple swapping since i had no further knowledge to do further corrections but they seemed working fine after that. Just serials not matching.