Це відео не доступне.
Перепрошуємо.
Reloading Room: Building A Heated Lubrisizer Base
Вставка
- Опубліковано 17 жов 2017
- In this video I will explain how I build heated bases for the Lubrisizers in my reloading room for sizing and lubing my cast bullets.
Our machined lubrisizer bases used in this project can be found here hillsgun.com/p...
Below are some of our affiliate links to products That I use in my reloading room to make the hobby more enjoyable.
Raw aluminum for the baseplate.
amzn.to/3ewPWva
Cartridge heater
amzn.to/2C8MHZ9
PID Temperature controller With 40A SSR/Heatsink/ and Thermocouple
amzn.to/2xOmSMJ
PID Temperature controller With 25A SSR and Thermocouple
amzn.to/2hOi530
Heatsink amzn.to/2yxeu2S
RCBS Lube-A-Matic 2
amzn.to/2kXlJMN
Lyman 4500 Lube Sizer with Heater 115-Volt
amzn.to/2zikutP
Please bear in mind that these are my opinions and the techniques I have chosen to use in my shop for my projects. You are responsible for your own choices and I take no responsibility for how you might use any information presented here. As a further note if this is a firearms related video and you are working on your personal firearms you may do as you please. if you chose to pursue this as a career and are working on customers firearms you have accepted the liability not only for the work you are performing for that customer, nut also for anything which may go wrong in the future which could be even remotely associated with your work. In a society which has come to accept responsibility for nothing as a gunsmith you are now accepting responsibility for everything.!!!
~-~~-~~~-~~-~
Please watch: "Building A Grown Up Quorn Tool & Cutter Grinder: Part 1"
• Building A Grown Up Qu...
~-~~-~~~-~~-~