Installing a DIY Car Blind Spot Monitoring system BSM
Вставка
- Опубліковано 19 вер 2023
- This is a review and installation on a Do it yourself Blind Spot Monitoring System for your car. This is a safety feature installed on many new cars of today, also referred to as BSM Blind Spot Monitoring or BSD Blind Spot Detection, its now available as a kitset so you can install it to your car yourself. #blindspotdetetction #blindspotmonitoring #blindspotmirror
Want to see more weekly Tech videos? SUBSCRIBE to the channel.
Popular Search Phrases:
Blind Spot Monitoring System
DIY Blind Spot Monitoring
Aftermarket Blind Spot Monitioring System
BSM
BSD
Blind Spot Detection
Very nice! Thank you for this video! Very clean install!
Thank you man, I really appreciate that :)
Now, that is the way to do it! Great video, just what I needed.
Thank you so much for your kind words, I really appreciate that
Thank you for your demonstration video, it is very helpful.👍
Thank you so much, I'm happy it was helpful to you 🙂
Clean install. Looks like car came with it
Thanks man, yeh that's the look I wanted to go for
This is pretty cool! I'm thinking about installing it in my vehicle. One question though, do the blind spot monitors detect stuff like tunnel walls? If you're driving alongside a tall barrier due to being in the farthest over lane, will the blind spot lamp illuminate? Does it bother you?
Ok, I guess two questions. How has it held up over the past three months?
hi, no i have never had it detect tunnels etc. It's been great, one of the best things I have ever bought and I can't recommend it highly enough, I absolutely love it
Hey man, great video! I've got 2 questions:
Did you have instructions come with the kit as per say what parameters it needs to be mounted exactly, ( with centimiters , the radars).
And do you think it would be possible to send the blinking lights make a cut out for them on the side mirrors and have the wiring go through from the door to the side mirror ?
Again thanks for the video.
Thank you so much. Yes the instructions it comes with tells you everything about how to Install the radar sensors. As for mounting the blinking lights in the mirrors, im pretty sure there not waterproof so probably not the best idea but you can buy blinking lights that are designed for the mirrors to do exactly what you want so that would be the best option. The blinking lights supplied in the kit are quite bright though if that was your concern, all the best
@@SHORTwithTECH Thanks for the prompt reply, will definitely try it out!
@dugix2292 your welcome, have a great day 😀
Hello, how are you? I congratulate you on a job well done. I have a simple question: How did you install the right and left turn wires so that the bell works when you turn? What is the bundle of wires that you installed, and where did you take it from? Thank you, the power source to you, artist 🌹
Hello, thank you for your kind comments, The right and left turn wires I personally connected at the Body Control Module but you can also connect them at the turn signal wires at the rear lights themselves or at the turn signal switch by the steering wheel. The other wires are just Power, Ignition and Ground which are straight forward but again I personally connected them at the Body Control Module as I wanted to do all the wiring connections at one point. For those who are not to confident doing wiring I would recommend everything be done at the rear of the car which will make the job easier to do. Hope that answers your questions 🙂
@@SHORTwithTECH
Nice, I'm installing now and having a problem identify correct positive wire in the rear turn lights, its jag f pace, there is like 8 wires very close to each other😳
Sorry I'm unable to help with that as no experience working with the F Pace
Hello my friend,i want to ask you if i could put other light indicators than the package has like the ones i found from AliExpress and they are leds which you install in the back of the side mirrors???Are the plugs from the indicators universal plugs???
Hello, I have not tried doing that but the plugs are very commonly used plugs. If the plugs were not compatible it wouldn't really matter because you could just cut them off to suit anyway. Hope that helps
I have a 2012 Hyundai Genesis 3.8 it already has rear and front sensors but it does not have the blind spot sensor. I can install one of those sensors and I have to program the computer.?
No, there is no programming required. You can just install the BSM system to your car, it just works as a standalone system
Fantastic installation video but i have one question please , if your passing cars and they came into ur blind spot area will it defect the car ? Or only when a car is over taking u
Thank you for your comment and question and the answer is no. This BSM system only detects cars in your blind spot approaching you from the rear of your car. If it detects cars when your passing them then you definitely have the radar sensors mounted incorrectly. Hope that answers your question.
Thanks for posting this! Does the system also work as Rear Cross traffic alert?
Because my dad loves pulling into a parking bay forward rather than reversing the back in. This would be helpful for him when he reverses out.
Thanks!
It's not designed for that no. Some of the 77Ghz systems can be used for that which I will be reviewing in the future but the best solution to your question is a system like this which is designed for exactly that ua-cam.com/video/Gp1HYtZ8wsc/v-deo.htmlsi=GwwFLpXz20HX_U0S
Oh thats amazing, cant wait for the video! Is this one the 24ghz or 77ghz, it didn't say on the box. I saw online rear cross traffic alert did work on some diy system.
If you have time could you please test reversing out of a supermarket parking bay and see if the light flashes, if a car or person walks by - with or without using indicators.
Thank you!
@dval2437 This one is the 24zghz system, the 77Ghz systems are about 3 times the price. Yes your right, sometimes when reversing out of a car park the notification lights will flash but it's important to remember that the sensors are mounted slightly outwards to detect blindspot areas so if there is someone walking directly in the middle of your car they won't be detected.
I plan to do a 77Ghz install on my new car in the next few weeks for the channel. I still highly recommend this 24Ghz system though as a BSM, it is awesome but the 77Ghz system is supposed to be better so we will find out in a few weeks just how much better it really is
@SHORTwithTECH Perfect thank you! What's making you upgrade to 77ghz? Seems like the 24ghz is very capable
@dval2437 Nah I'm not upgrading. I have just bought a new car and it doesn't have a BSM.Your right, the 24Ghz system works perfectly fine but car manufacturers have now changed to using 77Ghz systems from the factory so I need to keep up with the technology for myself and the channel
Can this BSM system be modified to alert a driver to left and right, lateral, of both front fenders and aft towards the rear of a vehicle? Almost the reverse of the the intended installation.
If I understand your question correctly, no it cannot, but you could install this BSM kit in the rear of your vehicle for rear detection and then install this:
ua-cam.com/video/TI0HlQrmVLo/v-deo.htmlsi=rtz6ZuG6QqBHaSNG
into the front of your vehicle for front detection. Or have I not understood your question correctly?
could you possible do a version of this at night? it seems like the lighting system is nice and bright but I wonder if it might be too bright for night driving and could possible be a distraction over being helpful.
plz and thank you
For that reason also, I mounted the notification lamps sideways, so there not pointing directly at my eyes and its definitely not distracting at night. If it's dark and someone is in your blindspot, you definitely won't miss them
Critical thinker eh, I like it. Thank you for the feedback. @@SHORTwithTECH
@BROWNJAPAN your welcome, have an awesome week 🙂
Nice
Thank you :)
Wow! thats amazing ! I need that for my work truck where can i purchase it ?
Thank you. Yeh they really are as good as they look. I purchased mine from here m.aliexpress.com/item/1005005699456652.html?spm=a2g0o.productlist.main.5.3f7eWYPrWYPrk4&algo_pvid=05658898-c0a7-4af9-b6fb-d165952ca345&algo_exp_id=05658898-c0a7-4af9-b6fb-d165952ca345-2&pdp_npi=4%40dis%21EUR%2119.04%219.33%21%21%2119.73%21%21%402103246c16970247061183084e1187%2112000034048195569%21sea%21IE%210%21AB&curPageLogUid=Sko5sS4MViPl Hope that helps you
Excellent work!
Very good product.
Do you know if it can be placed to all vehicles especially new ones?
I've heard that it might be not compatible with the new cars and the control unit sees it as an error so it doesn't work properly or causes damage to the control unit.
I don't actually believe it. However, if there is a chance to be incompatible it wont work no that this would cause any damage. Right?
Thanks, appreciate it. Technically the newer the vehicle the better as most newer vehicles these days have big rear plastic bumpers making the sensor mounting easier.
It's impossible to be not compatible and also impossible to damage anything because this system does not need to connect to any control unit at all (i only connected it to the BCM out of choice). There's only 5 wires, power, gnd, Ignition and turn indicator lights which can all be connected at the rear of the car if you want to so it doesn't connect to anything that could be damaged. It's very easy to hook up. What kind of car are you installing it on?
@@SHORTwithTECH
That's correct! Thank you for your quick reply!
As for the "damage" they said, this might happen because of the wired connection to the lights, not from the power it takes from the car to operate. The "theory" is that the control unit will detect that connection as a fault or as a strange part not within the car .
Anyway, I have purchased the exactly product you are mentioning from ali express and I'm placing it today to a new Toyota Yaris cross.
Hope it will go well as in you video without any surprises or anything else.
Wish me luck!😁🤞🤞🤞
@NickosC1 I understand exactly what you mean with the wired connections interfering with the lights, that's a common complaint but very easy to get around for a professional installer (when its required). Good luck with the installation, that should be really straight forward on a 2023 Yaris, you won't regret installing it, they are worth all the hard work
Unfortunately it doesn't work properly. Only one sensor is blinking, the other one does not have a light. There is a beeper sound though but I cannot understand what the radar catches and from which side. I will go back to the professional installer to check the wiring again. But if there is a damaged radar or a bad sensor it's a pity for all the work it's been done😢
@NickosC1 Sorry to hear that however the sensors are on plugs so replacing a faulty sensor is easy plus its just an LED so could be repaired easily aswell and the radars are also on plugs to but there's obviously a bit more work involved to replace that but from what you explain that doesn't sound like a faulty radar, it sounds like something very simple such as a bad or damaged connection. There's lots of things you could try to fix this yourself but if it was installed by a professional installer then yeh its best to take it back to that place and ask them to fix it for you. I wouldn't worry about it, it sounds like a simple fix and not faulty product hardware. Good Luck!
Scusami...per favore dove hai preso il kit blind spot radar???grazie
puoi acquistare il radar per angoli ciechi da questo link, grazie
a.aliexpress.com/_mN3fntS
Have you seen any problem that the cars two or three lanes from your car triggering the sensor?
No it won't detect cars any further then the lane next to you (on both sides of you course). That has never been a problem ever for me. Are you having that problem? If yes then my guess is because you have the radar sensors aligned incorrectly on the inside of your bumper. Sensor alignment is incredibly important for this system to function correctly and when setup correctly this system will work flawlessly and it has been for me for months now
@@SHORTwithTECH Thanks for the info. I haven't installed it yet. Just wondering.
@drrobotsir Your welcome. This BSM system is designed to detect short distance objects. Any cars that are not in the lane next to you will not be detected so on the highways and motorcways ALWAYS turn your head and check yourself before changing your lane because this BSM system cannot detect cars that far-away from you
Hi, how do you find this system? Are you happy with it? Any issues? I'm looking to buy and install it by myself. I noticed there is 24 Hz and 77 hz available, any thoughts? Thanks
I love it, it's been so reliable. If it ever failed I would Install another one tomorrow as I just can't be without it now. Mine is 24Ghz, I haven't tried the 77Ghz system yet. The installation is a big job so you wouldn't replace it until you have to, I would recommend you install one, you wont regret doing it
Silly question maybe
but the sensors can work through the rear bumper or they point at the ground
@@swayno7154 through the bumper, i found system with one sensor only and it can be installed outside of the bumper, its mostly for trucks, but can be used on any car and its 77 Hz
@swayno7154 There is no such thing as a stupid question but no, DON'T point the sensors to the ground. the radar sensors must be mounted horizontally and operate by penetrating the signal through the plastic bumper yes. They won't penerate through metal though so don't mount the sensors behind a metal bumper, it won't work as it will block the signals
@ot2325 yeh you can get external sensor systems aswell which makes the installation a little bit easier and faster, but external sensor mounting looks very ugly, unless it's an old car and you don't care what it looks like.
does it work if you're approaching a vehicle
No, blind spot monitors are not designed to work like that. It's designed for detecting cars thar are approaching you and are in your blind spot
Can I take it to a shop for this
Yes, it's probably best to call a shop first to make sure they are happy to do the job for you as some shops may dictate that will only Install there own products, but this job can be carried out by any auto electrician if your not confident doing it yourself
Buzzer is enable only if ACC switch on?
Buzzer only works with turn signal switch on
@@SHORTwithTECHcould you please shared link?
@fuadhasanov238 a.aliexpress.com/_msqXCGI
@@SHORTwithTECH thanks
@fuadhasanov238 your welcome, have a great day
There has to be an easier plug and play type system to attach to mirrors by now
Yeh the mirrors can be a challenge, ive heard of so many people breaking the glass trying that setup. And the problem is you have to remove the mirror to run the wire from the led lamp to the inside of the car and that's where it can go horribly wrong
Link?
Hi, you can buy it online from here. m.aliexpress.com/item/1005005699456652.html?spm=a2g0o.productlist.main.5.3f7eWYPrWYPrk4&algo_pvid=05658898-c0a7-4af9-b6fb-d165952ca345&algo_exp_id=05658898-c0a7-4af9-b6fb-d165952ca345-2&pdp_npi=4%40dis%21EUR%2119.04%219.33%21%21%2119.73%21%21%402103246c16970247061183084e1187%2112000034048195569%21sea%21IE%210%21AB&curPageLogUid=Sko5sS4MViPl
hi you can buy it online from here. m.aliexpress.com/item/1005005699456652.html?spm=a2g0o.productlist.main.5.3f7eWYPrWYPrk4&algo_pvid=05658898-c0a7-4af9-b6fb-d165952ca345&algo_exp_id=05658898-c0a7-4af9-b6fb-d165952ca345-2&pdp_npi=4%40dis%21EUR%2119.04%219.33%21%21%2119.73%21%21%402103246c16970247061183084e1187%2112000034048195569%21sea%21IE%210%21AB&curPageLogUid=Sko5sS4MViPl
Hi you can buy it online from here. m.aliexpress.com/item/1005005699456652.html?spm=a2g0o.productlist.main.5.3f7eWYPrWYPrk4&algo_pvid=05658898-c0a7-4af9-b6fb-d165952ca345&algo_exp_id=05658898-c0a7-4af9-b6fb-d165952ca345-2&pdp_npi=4%40dis%21EUR%2119.04%219.33%21%21%2119.73%21%21%402103246c16970247061183084e1187%2112000034048195569%21sea%21IE%210%21AB&curPageLogUid=Sko5sS4MViPl
ultrasonic radar vrs the microwave, whis is better
Good question. It all depends on the application it's being used for
TALK!
Thanks for the feedback
Link ?
m.aliexpress.com/item/1005005699456652.html?spm=a2g0o.productlist.main.5.3f7eWYPrWYPrk4&algo_pvid=05658898-c0a7-4af9-b6fb-d165952ca345&algo_exp_id=05658898-c0a7-4af9-b6fb-d165952ca345-2&pdp_npi=4%40dis%21EUR%2119.04%219.33%21%21%2119.73%21%21%402103246c16970247061183084e1187%2112000034048195569%21sea%21IE%210%21AB&curPageLogUid=Sko5sS4MViPl
@@SHORTwithTECH did the bsm came with the hole saw?
@williamm7408 Nah man, all the tools used in rhe video are my own apart from the black glue i used to attach the radar sensors to the bumper which was supplied in the kit
@@SHORTwithTECH what size of hole saw did you use for the door panel indicator
@williamm7408 Yeh man, I just used my 25mm / 1 inch hole saw to do that