DIY Metal Band Saw Stand Modification
Вставка
- Опубліковано 4 сер 2016
- I made this stand for my metal cutting band saw to make my life easier while profiling knives blank... Farewell angle grinder!!! Check the links below for knifemaking related videos and subscribe for more DIY stuff :D
Edit: Check out my friend Junk Workshop making a great stand for this exact metal band saw we have:
• Diy Metal Bandsaw Stan...
★Music★
/ niki-the-dove-mother-p...
★Social Media★
Facebook ► / blackbeardprojects
Twitter ► / blackbeardproje
Instagram ► / black_beard_projects
Google+ ► google.com/+BlackBeardProjects
★Knifemaking related video★
Kiridashi ► • DIY Japanese Knife: Ki...
Belt Grinder ► • Awesome DIY 2x72" Belt...
Leather Sheath ► • DIY Easy Leather Knife...
★Last week video★
• DIY Motorized Turntable
★Next week video★ - Навчання та стиль
Brilliant work, as always Mate. Thanks again!
Thank you a lot brother. I can't tell you how much I appreciate :)
Great idea!
Thanks!
On my list to buy.. great stuff as always! 👊
Thank you mate! :)
Very helpful, I am looking at getting a similar model to this one very soon, great to know it can be converted to an upright band saw, great video!
Thank you! :) :)
sei un grande! vedendo i tuoi video mi rendo conto che sei un genio!! spero di vedere presto altri lavori da te realizzati..... continua così
Haha grazie troppo gentile xD Ho appena pubblicato un nuovo video! ;)
Very nice! Now if only I could finish this sheath, I could start cutting out a blank too!
Thank you :D I just watched your kunai video, really well done! Both the knife and the editing! Keep on cutting :')
...ottima la Nebes ,bella idea!
Perfect...your video and idea are Always perfect
Thanks man :) too kind
Good work sir !
great video i love your stuff
Thank you :)
Brilliant!!! Thnx :-)
Thank you!! :)
bellissimo progetto
Grazie! :)
nice video! as usual:)
Thank you a lot :D
Ive a identicale saw but I think that Ineed a other saw for cut this little things but now Ive see your attachement for your saw this is perfect I need this Im running too my work shop too make it thank you for your video byeeee
Great solution... what bandsaw do you have?
Pretty useful
Yeah! :D
Ottimo lavoro! La sega è bloccata a 90° in qualche modo??
Nice project! Do you remember what size the steel profile has? Maybe 40 or 50mm?
Thanks a lot!
NICE
Thanks!
I always wonder who the idiots are that give videos like this a thumbs down. Nice work and good info.
love it! subd
Thanks :D
bons equipamentos são necessários para grandes OBRAS.
In the vertical position, how many inches (or cm) would you say is between the blade and the saw body (i.e. left of the blade)?
I need to check if you want the precise measure, around 10-12 cm :) Not much!
I'd super appreciate it if you checked! I'm looking at a similar saw which has about 3 inches (7.6 cm) of clearance but max miter of 45 degree vs your saw's 60 degree. Here is that other saw: m.northerntool.com/products/shop~tools~product_200660083_200660083?adv=false
My current portable metal band saw (Milwaukee) has ZERO clearance! So the longest cut I can do is the depth of the throat - 5 inches (12.7 cm); if I flip the piece and cut on the same line I can get it to 10 inches (~25cm). Which isn't a lot.
Love your UA-cam videos btw!
It's about 9cm. I overestimated :')
You are a saint, Mr. Black Beard! Thank you.
Don't let anyone tell you you're a pirate.
en.wikipedia.org/wiki/Blackbeard
www.thoughtco.com/facts-about-blackbeard-the-pirate-2136236 (great drawing in item #3. I wish I had a beard that smoked!)
Ahah :'D Thanks man
Hi. Awesome videos! I just had a question.. How much TPI on you sawblade? And can you cut very thin metal with it? Approx 2mm stock?
Thank you! I'm sorry I don't know about TPI, it's a fine metal cutting blade, and yes it can. I cut thin steel and aluminum sheat too with no problem :)
Black Beard Projects I ended up buying a 14tpi blade for my FMB bandsaw . Not the fastest cut but way less messier then with the angle grinder. :)
per metterla in verticale , basta solo togliere il blocco o bisogna fare delle modifiche , grazie
Just bought my Nebes saw today same model but how do u get the saw to go full 90 degrees? mine doesnt go full way.. :/
You need to take off a black bolt near the hinge that block his movements :) After you have done that you can set it at any angle you want! If you can't find it send me a pm and I will take a photo for you my friend :D
Ok ill try it tomorrow and weld up a little table for it cause i like the idea a lot :) thanks for fast reply :) keep up the good work!
Great! Thank you! Have fun :D
what brand of saw is this, that will raise to full vertical position?
great job !!! (where did you buy the band saw, please =D)
omg this is an awesome build but i just Wonder how did u get ur saw to hold at 90 degrees mine will just fall Down Thanks in advance!
Thanks mate! :) I place a tiny wooden block under the green part of the saw so that it can't get lower and extend over 90° A better solution would be a bracket from the base to the green part but so far I had no problem to use it as is :D
Black Beard Projects Alright Thanks mate :D im currently building this and so far everything is Going perfect Thanks for The reply also :D
That's great :) Have fun my friend!
Black Beard Projects you know what i just Made my first knife Thanks to this and your beltgrinder (i built a similar one which i took inspiration from yours) Thank you so much for these videos and never stop doing them :D
Thank you a lot :) I can't tell you how glad I am to hear that :) :) :)
Im thinking of getting a saw like this. Different brant, but looks almost identical. Do you recommend it? I thinking either this or the evolution rage series mitre saw ones. I Think the evo might be much faster, but I like this idea that you can also use it as a normal bandsaw for curved stuff and small parts.
Sure! I love this machine. I use it all the time, it earned a fixed place on my already very small workbench :')
Thanks I went an bought it already. Returned the first one, was very inaccurate and some bits fell off haha. Second one is better. Cuts very clean, but not 100% straight. It's a bandsaw anyway, so not something I expect super high precision from. And I think it's the best and most versatile option when you build a table for it like you did. I'll convert mine too! :)
tres bonne video
What saw do you have. Worth to buy it?
Grazie x il tutorial. l'ho fatta anche io con una TM95 INVERTER. Grazie
Grande! :)
Ti posso chiedere quale dentatura usi x la lama della sega? 8/12 o 6/10?
great vid, what bandsaw is that?
It's called "Nebes Tm101" :)
Salve ,come hai fatto a far alzare la lama in verticale , a 90 gradi essendoci il blocco ?
what kind of bandsaw are you using? Where can I get one?
Tnx lots you re very good with your hands!
francisco guerrero Thank you sir! :)
buenos vídeos
que marca y modelo es la sierra?
cual es el precio?
saludos
Mine it's called "Nebes tm101" I bought it used from a local guy, if you want to buy it new is 350€ :)
Приветствую!Подскажите ,какой фрезер в этом видео?
I you mean the tool at 2:16 It's a cheap plunge router I bought at the supermarket :')
genius. that is all.
Thank you, too kind! :)
What saw is this I can't seem to find one of this size
Mine is called Tm101 Nebes. Metal cutting band saw :D
+Black Beard Projects thanks for the reply awesome videos keep it up !!
When you weld clean the steel first with a angle grinder
Yeah I know :'D But I forgot most of the time! But you guys keep on telling me so hopefully next time I'll remember :)
smart boy
:)
di dove sei?
what is the brand of the band saw?
Nebes tm101
thanks
What is the model of your bandsaw?
Sorry, should have read further down... Nebes Tm101. Thanks
Wood make vibrations and on the saw result broken theets
Братан ты из россии или бывших снг???