Henley Engineered Natural Oak Lacquered Click Lok 127mm x 153mm Wood Flooring

A fantastic Natural Oak engineered wood flooring. Each individual board is 127mm (12.7cm), the overall thickness of the plank is 15mm (1.5cm), including a top 3mm layer of Oak veneer. The 3mm wear layer enables you to sand down and refinish the surface up to 2 times. This shouldn’t be necessary for the first 10-15 years in most domestic environments. Engineered flooring, such as this, is highly resilient to temperature and humidity changes meaning they can be laid in most rooms in the home, including conservatories, with the only exception being the bathroom. Due to the stability of our engineered flooring products laying the flooring in rooms heated with water based underfloor heating is not a problem. Each board is manufactured with a click system profile, so each board can simply be clicked together. Manufacturer’s recommendation is to tap the planks on the edge with a tapping block and rubber mallet to make sure they are clicked tightly together. The grade of this Oak is mixed, meaning it will contain some knots as is typical with Oak products.
This engineered Oak would usually be fitted as a floating floor installation, where a 3mm underlay is laid onto the subfloor beneath the flooring, this gives added protection from any damp and will act as a sound barrier and insulator. Our 4mm Compressed Rubber Underlay is suitable for water based underfloor heating.
Each pack may contain starter boards to allow you to stagger your layout.
Industry standard for wastage and cut offs is 10%, with 5% for visual grading. This should be factored into your calculations when ordering.
For more information visit: flooring365.co.uk/henley-engi...