I was so close to buying a used Ricoma but late minute I had a bad feeling and didn't end up purchasing it. I did find the Bai on amazon and decided to purchase that one instead, it will be delivered to me on the 12 and I'm so excited but nervous at the same time. Watching your video made me feel a lot better about my decision of not buying that Ricoma.
So happy to see you are BACK! Just a note, your videos convinced me to get a Bai a time ago… so happy your business still blooming! Thanks for the machines comparison!
Neita, so good to have you back! Sure have missed you! I don’t have either a BIA or a Ricoma, I jumped in head first and got a Melco 16+ needles. Am hesitant to use it after an accident. My husband accidentally responded to an alert on the cp while I was reaching my left first finger under needle #6, to remove a thread. Lesson learned! Never, never put your hand or fingers under the needles, while machine is turned on. The tip of the needle stuck within the first joint of my finger…had to have surgery to remove it! Yuk! It was kinda funny, while setting up the surgery, word got around in the surgery setup area. When giving my name and the reason for surgery…I got lots of attention from the team! I just felt stupid though and let my husband control the Melco when any embroidery is done. Need to get over that fear. 😰❤️
How are you going to come out with a comparison video after almost a year. Girl we needed a life update first, I feel betrayed and abandoned lol. So glad business has been good for you guys. You guys totally deserve it! ❤ I hope you guys are back on YT for good now. 🤔
Wooohooo welcome back miss you. Good video on this topic. Does the Bai come with its own software? Is it compatible with MacBook? How many hoops did the Bai come with? Does it offer a cap drive? Do they offer a 20 needle? Thanks you for this video
Neita!!! Girl I missed seeing you and Red!!! Thanks for coming back!! You are very much appreciated for all the info you provide to us!! Congratulations on all your success!! Goals!!!
Hi, I am so happy to see you back. I hope your family are doing well. I have Ricoma em 1010, I don’t like Ricoma customer service is not great, I hope others customers have had better service, than I have experienced. I will save to buy a Bai in the near future because I would like to work on hats/ caps. Em1010 is not great for hats.
Welcome back! I purchased my BAI immediately after you uploaded your video on the machine. Can you make a video on hats? PLEASE PLEASE . I’ve been wanting to embroider on hats but feel so intimidated. Again, glad you’re back and look forward to seeing more videos. This is an add on to my original comment. I have my BAI for two years now and thank God, I haven’t had any problems outside of getting my tension right.
I’ve unfortunately not been able to purchase a bai yet, “life happens” but I have talked with Louisa multiple times she is always friendly willing to help with any questions you have and never pushy! I highly recommend her to anyone Interested in purchasing or looking for more Info on the machines!
I have a QMS machine from China and I have had issues with the hoop hitting the arms on bigger items. What I have found is that the arms were drooping. I put something under the hoop and bobbin to support the garment so that it wouldn't pull it down so much and that works.
Just found your channel and I subscribed. Great video. I almost purchased a BAI but ended up ordering a 15 needle small home machine from another Chinese Company. Had a couple of issues but it was just adjustments to the computer system pad. They were very helpful. So far, so good. I may purchase another. You might want to try Maggie Frames Hooping system. i just got one. I've only tried one embroidery so far, but it worked great. We'll see if it holds up in the long run. You can purchase the hooping system with a frame and get 2 mores frames for the price of Mighty hoop with one frame and system.
In most welcome back, you’ve been truly missed. I really enjoy your video your Dtf videos. I really wish you could put more content better Contant like something better than productions. You’re very real. You’re very honest and you’re very transparent.
Hey lady!! I'm so glad your back 😃🙋🏽♀️ This is a great video. It has so much information... thanks for sharing.. My plan is to get a BAI machine... I am currently saving 🤞🏽🤞🏽 🙏🏽 which is taking longer than anticipated... but that is ok.. I really want to buy it cash... like you said... do not want to have that overhead when business slows down
New to your page. Thanks for the review. I've been wanting to check out Bai. I have the Ricoma MT1501. I have the same issue when using needles 13-15. The machine get stuck on those needles so I cant use them, basically. 😅 very inconvenient
Im new to your channel. Thank you. I was thinking of different machines but didn't know which way to go. I would have to finance the machine I have 4×4 size but need one that works well with baseball caps
Can you please do tutorial? I'm having issues with tension. How to twist the nobs and other stuff 😂lol I have a really hard time with structure hats. 😅
hello Stephan, Louisa here, from BAI embroidery machine company, nice to meet you❤️❤️❤️❤️ If you don't mind, I can give you more information about the product
@@NeitaFajita Actually you can use the same brackets for the Bai and Ricoma. You just need to put the arms on the Ricoma in different slots. The guy from Mighty Hoop told me that. So I just purchase the brackets for the Bai and the hoops fit on both my machines without changing the brackets. I hope that makes sense.
Ya which makes it really difficult when trying to decide what machine is best for you and your business. I like being able to see what the cost is without any outside influences
Ahh, see this is the problem with UA-camrs when they start getting in ‘gifts’ from company’s. They sing and dance about the item at first without giving it a settling in period. People go out and buy the item for their business and then it all goes wrong.
Not sure what you mean by this comment but I have been honest about all my machines from the very beginning and always encouraged my followers to do their own research before purchasing any machine. Nothing was gifted by the way and each BAI machine was purchased with our own hard earned money ✌️
@@NeitaFajita my mistake then. But I’m sure in your Ricoma unboxing you said “they were nice enough to send me” and you were now an affiliate for them. Maybe it’s just a difference in wording from the UK to the US.
I was so close to buying a used Ricoma but late minute I had a bad feeling and didn't end up purchasing it. I did find the Bai on amazon and decided to purchase that one instead, it will be delivered to me on the 12 and I'm so excited but nervous at the same time. Watching your video made me feel a lot better about my decision of not buying that Ricoma.
How has your experience been? I’m in the same boat. Was going to get the em 1010 but last minute switching to bai mirror
WELCOME BACK NEITA. You have been missed.
Thank you so much! I am glad to be back and missed you all!
So happy to see you are BACK! Just a note, your videos convinced me to get a Bai a time ago… so happy your business still blooming!
Thanks for the machines comparison!
So happy to see you back!! Love this video. Thanks.
I have so many issues with my ricoma, lucky to get through a few hats without it stopping.
I have Bai Vision
No complain about.
I agree that you said ❤
🖤🖤🖤🖤
I am looking to buy one and I am new to embroidery so how was your experience with it so far.
WELCOME BACK!!! You guys have been missed for sure!! Can't wait to see all the new updates!! ❤
Sooo glad to see you back! Currently binge watching your old videos. I have a Ricoma as well and love it! Wishing you and your family the best!!
Thank you for watching!!! 🖤🖤🖤
Neita, so good to have you back! Sure have missed you! I don’t have either a BIA or a Ricoma, I jumped in head first and got a Melco 16+ needles. Am hesitant to use it after an accident. My husband accidentally responded to an alert on the cp while I was reaching my left first finger under needle #6, to remove a thread. Lesson learned! Never, never put your hand or fingers under the needles, while machine is turned on. The tip of the needle stuck within the first joint of my finger…had to have surgery to remove it! Yuk! It was kinda funny, while setting up the surgery, word got around in the surgery setup area. When giving my name and the reason for surgery…I got lots of attention from the team! I just felt stupid though and let my husband control the Melco when any embroidery is done. Need to get over that fear. 😰❤️
Sorry to hear that must have been very painful. Thanks for putting that out there it will make more alert now while at my machine then I was.
How are you going to come out with a comparison video after almost a year. Girl we needed a life update first, I feel betrayed and abandoned lol.
So glad business has been good for you guys. You guys totally deserve it! ❤
I hope you guys are back on YT for good now. 🤔
My hubby posted a life update on his channel and I have one coming too very soon 🖤🖤 thanks for watching!
Wooohooo welcome back miss you. Good video on this topic.
Does the Bai come with its own software? Is it compatible with MacBook?
How many hoops did the Bai come with? Does it offer a cap drive?
Do they offer a 20 needle?
Thanks you for this video
Neita!!! Girl I missed seeing you and Red!!! Thanks for coming back!! You are very much appreciated for all the info you provide to us!! Congratulations on all your success!! Goals!!!
We missed all of you as well! We are so excited to be back
Great to see you back. You look so well
Thank you!! 🖤🖤🖤
Wow! You have grown 9 machines. Congrats
Hi, I am so happy to see you back. I hope your family are doing well. I have Ricoma em 1010, I don’t like Ricoma customer service is not great, I hope others customers have had better service, than I have experienced. I will save to buy a Bai in the near future because I would like to work on hats/ caps. Em1010 is not great for hats.
Thanks for sharing!! I am so sorry you didn't have a good experience with the customer service :(
hello friend, sorry for your pain, if you need more BAI embroidery machine information, Louisa here to help you❤❤❤
It's so good to have you back. I watched all your old videos more than once. How's you lil ones,they must be big. Welcome back and mucho blessings
Neiiiiiiitttttaaaaa!!!!! Welcome back girlie!!!!
Love the color information that was shared, very well executed.
Thank you! 😊
@@NeitaFajita you’re welcome 🥹
Welcome back! I purchased my BAI immediately after you uploaded your video on the machine. Can you make a video on hats? PLEASE PLEASE . I’ve been wanting to embroider on hats but feel so intimidated. Again, glad you’re back and look forward to seeing more videos.
This is an add on to my original comment. I have my BAI for two years now and thank God, I haven’t had any problems outside of getting my tension right.
Yes of course! I love doing hats on the bai 🖤🖤
hats are easy just dont hit the frames
@@norcalembroidery1626 haha yes! That was my biggest fear starting out with hats
I’ve unfortunately not been able to purchase a bai yet, “life happens” but I have talked with Louisa multiple times she is always friendly willing to help with any questions you have and never pushy! I highly recommend her to anyone Interested in purchasing or looking for more Info on the machines!
❤❤❤❤thanks friend😘😘😘😘😘
I have a QMS machine from China and I have had issues with the hoop hitting the arms on bigger items. What I have found is that the arms were drooping. I put something under the hoop and bobbin to support the garment so that it wouldn't pull it down so much and that works.
Glad to see you back. Bai mirror has both 12 and 15 needle. I have the Bai mirror 1501.
just saw the correction
Welcome back, happy to see you, you're looking great too.
Just found your channel and I subscribed. Great video. I almost purchased a BAI but ended up ordering a 15 needle small home machine from another Chinese Company. Had a couple of issues but it was just adjustments to the computer system pad. They were very helpful. So far, so good. I may purchase another. You might want to try Maggie Frames Hooping system. i just got one. I've only tried one embroidery so far, but it worked great. We'll see if it holds up in the long run. You can purchase the hooping system with a frame and get 2 mores frames for the price of Mighty hoop with one frame and system.
In most welcome back, you’ve been truly missed. I really enjoy your video your Dtf videos. I really wish you could put more content better Contant like something better than productions. You’re very real. You’re very honest and you’re very transparent.
Hi Neita!!! Excited to see a new video from you! ❤️
Thank you!! 🖤🖤🖤
Welcome Back 🎉. I’ve learned so much from your tutorials!!!!!!
Hey lady!! I'm so glad your back 😃🙋🏽♀️ This is a great video. It has so much information... thanks for sharing.. My plan is to get a BAI machine... I am currently saving 🤞🏽🤞🏽 🙏🏽 which is taking longer than anticipated... but that is ok.. I really want to buy it cash... like you said... do not want to have that overhead when business slows down
Neita!!!!! Wow this is so amazing to see where you are now 🎉 You and Red E have really come far in a short time. I knew you would 😊
Wow! So good to see you back!!!!
Thank you for watching!!
New to your page. Thanks for the review. I've been wanting to check out Bai. I have the Ricoma MT1501. I have the same issue when using needles 13-15. The machine get stuck on those needles so I cant use them, basically. 😅 very inconvenient
Glad to see ya back! 🎉🎉Definitely love my Bai Mirror 1501!
so nice to see you again! looking forward to watch your videos
Thank you for watching!!
Welcome back! Missed you! Thanks for sharing this info!
So glad you are back
🖤🖤🖤
Im new to your channel. Thank you. I was thinking of different machines but didn't know which way to go. I would have to finance the machine I have 4×4 size but need one that works well with baseball caps
Oh my!!! WELCOME back. Missed you!!
Thank you and I missed you all too!!
So happy to see your videos again.😊
I'm so happy your back!
Thank you! I am glad to be back too 🖤🖤🖤
❤❤❤❤🎉🎉🎉🎉🎉thanks neita, muchhh appreciateddd for your real feedback👍👍👍👍👍👍
My pleasure 😊
Welcome back! Missed you!❤❤❤
Thank you for watching!! 🖤🖤
Omg hey Neita, how are you and the family. It’s so good to see you
Thank you! We are doing good ❤️ thank you for watching!!
@@NeitaFajita I know your children are so big now.
Hey girl!! Welcome back, missed your content!
Welcome back, good to see you🥰
Thank you! 🤗
It is so great to see you!!!!!!
Aaaw Neita!!!! I missed you!! I am going through a low sales in my shop your video kept me from thinking about it.
I missed you all so much and thank you for watching! Hoping a ton a sales come your way 🖤🖤
Very comprehensive review! Thank you for this, and welcome back! I can't wait to hear the story of how you've grown in the last year.
Thank you so much!
Welcome back ❤
🥰🥰🥰
Holaaaa
I’m so excited to see you❤❤❤
Thank you and thanks for watching!!! 🖤🖤🖤
I was wondering what hooping station you use for bai embroidery
I using a mighty hoop hooping station
This was really nice! Thanks
Glad you liked it and thank you for watching!
So informative! Thank you 😊
🖤🖤🖤
Thank you for your sharing,that's really helpful .
Can you please do tutorial? I'm having issues with tension. How to twist the nobs and other stuff 😂lol I have a really hard time with structure hats. 😅
I’m waiting for the Amazon Prime deals in about 2 weeks before I purchase a BAI or SmartStitch embroidery machine
Sooo cool! I will have to check out the prime deals for the BAI as well
hello Stephan, Louisa here, from BAI embroidery machine company, nice to meet you❤️❤️❤️❤️
If you don't mind, I can give you more information about the product
Talk to a Bai rep… they can get a better deal than Amazon…
I bought from Louisa Chen… she is amazing
@@wandaivetterivera3887❤❤❤
Welcome back
Do both Ricoma and Bai machines use the same mighty hoops?
They will need to have different brackets on the mighty hoops
@@NeitaFajita Actually you can use the same brackets for the Bai and Ricoma. You just need to put the arms on the Ricoma in different slots. The guy from Mighty Hoop told me that. So I just purchase the brackets for the Bai and the hoops fit on both my machines without changing the brackets. I hope that makes sense.
Good video thanks
Does ricoma use the same cap frame as bai?
I used them together with no issues
Yeah Ricoma forces you to call and speak with someone. They never show pricing on their site
Ya which makes it really difficult when trying to decide what machine is best for you and your business. I like being able to see what the cost is without any outside influences
Yay ❤
❤️❤️❤️❤️
I missed you
I missed you all too!
Where have you been?
Neitaaaaa
They are really heavy and I wanted to put it upstairs.
❤
Ahh, see this is the problem with UA-camrs when they start getting in ‘gifts’ from company’s. They sing and dance about the item at first without giving it a settling in period. People go out and buy the item for their business and then it all goes wrong.
Not sure what you mean by this comment but I have been honest about all my machines from the very beginning and always encouraged my followers to do their own research before purchasing any machine. Nothing was gifted by the way and each BAI machine was purchased with our own hard earned money ✌️
9 embroidery machines, zero gifts. Believe it or not people can buy their own things.
@@NeitaFajitawasn’t your Ricoma gifted?
@@clayrhumphrey9217 it was not gifted, I no longer have the machine.
@@NeitaFajita my mistake then. But I’m sure in your Ricoma unboxing you said “they were nice enough to send me” and you were now an affiliate for them. Maybe it’s just a difference in wording from the UK to the US.
Ricoma has a lot of good info, good marketing, good videos, but their machines are not great. stay away
Paid ad obviously
Actually no it wasn’t 🖤
Welcome back