MG 1/100 BUSTER GUNDAM Speed Paint build Review
Вставка
- Опубліковано 12 вер 2024
- MG 1/100 BUSTER GUNDAM Speed Paint build Review
Please feel free to add your comments or any questions. I will try my best to answer to all of them
Thank you for watching
#Mastergrade #Bustergundam #Armstudio
what I love about the buster is that its very simple. its just a gundam with a big ass gun
The outer coat of the gundam model makes me fascinated, this is a very beautiful yet simple custom. After finishing, the gundam looks much stronger and more powerful than the original Bandai version. Thank you very much
Thankyou for the review. Ive bought it,build it exactly like this. The result in person is amazing. Thankyou for being my first MG build sifu
What an awesome surprise to wake up to...after my dog woke me up because of a thunderstorm. As always, AWESOME work and video!!!!!!!
Thank you man
Another awesome build man, I was just wondering about the top coat you use. When full dry does it easily scratch? How long do you usually wait before assembling the kit?
I wait around 10-15mins. Yeah It can be scratch even leave it overnight.
This is fantastic! I'd love to replicate this stunning buster build. Could you please clarify the number of topcoat layers to apply per part? It seems like you apply two coats in the video. Is that the recommended amount?
It just for show in the video. Actually spray more than that. Start with thin layer. Turn the part around, make sure all areas are applied. Wait until it dry and redo it 2-3 time.
Another fine piece of work as usual!!!!! Do you apply the flat topcoat on the grey pieces that make up inner frame too?
I used to apply topcoat on whole inner frame but now only visible area.
Right on this is one of my favorite gundams and im waiting till i can get my hands on one someday
If you have my next build I'll be watching 1st. Taught me a few things on this vid. Would gundam makers work for the clear parts?
Do you mean painting clear parts with gundam marker?
Just finished mine, no water slides tho. 1st time using the dry press ons.
This is gorgeous! Are you just panel lining and top coating?
Yes panel line and topcoat
good quality video keep up the good job i love buster and you did an impressive job building it :)
Thanks man
This is my all time fav kit.. nice work 👏👏💯🔥👏👏👏
Thank you man
That's awesome! Sick build!
Thanks man
Hi! What thinner did you use to clean up the black paint from the eyes? And how did it not remove the clear green?
Thanks in advance! :)
Clear green is lacquer paint. Black is enamel paint. Use enamel thinner to clear up. Clear green wont be removed because they are different type of paint
is the piece in the fore arm loose and tends to pop off when you bend the arms??
Yes from its design
Tempted to Panel Line this in brown instead of black
What do you use to remove excess from panelling?
enamel thinner
Awesome work!!! I’m a gundam SEED fan working on my MG Freedom 2.0. Quick question do you ever use Gloss clear as base top coat before panel lining (Tamiya) and then at the very end use Flat top coat? I use Mr. Hobby brand. Thank you!
I normally dont do that. Do you panel lining on bare plastic or painted part?
I haven’t yet. I’m only planning on panel lining on bare plastic. Some people are saying if I use Tamiya Panel line on bare plastic it could end up cracking the plastic. Hence, using base coat of gloss coating so that I am panel lining on the gloss coat and not on the bare plastic itself. Once all that is done they recommended topcoating it with gloss/flat/matte base on my preferences.
@@uge2616 from my experience most crack happen when panel line stuck in seam line instead of panel line. To avoid this mistake, i do panel line each part first then assembly later. Gloss coat would help but i think it’s too much work and paint. It is unnecessary since we know the root cause.
That makes sense!!! Thank you so much for the tips!!!! Can’t wait to see your future builds!!!
nice gundam your making
Thank you man
@armstudio May I ask what brand of water slide decals you use? I like your videos they help me whenever I am stuck with a section!!!
I dont have specific brand. As far as i know ,Bandai, Artisan and Evo are ok. Dont use D.l model decal unless you dont really have choice.
@@Armstudiogunplaspeedbuild What’s D.I model decal? And have you used SIMP pro decals? That is the one I have at this moment! -Thank you!
@@joellapus7225 D.l is a brand. Simp is ok as well. I used it on my Leo-s, vayeate and mercurius.
@armstudio thank you man! I really like your videos; NO BS! Very straight to the point. May I ask how your gundams are holding up now with all of the work u did? Like are there any cracks from paneling, etc???
@@joellapus7225 They are all fine. I just put them in my showcase. Crack would occur on panel lining process. From my experience most crack happen when the paint stuck in seam line instead of panel line. To avoid this mistake, i do panel line each part first then assembly later.
great work, is that gray or black panel lines?
It's black.
How do you avoid scratching the top coat when transforming the weapons? Those pieces slide, doesn't the top coat scratch off when you slide the barrel up and down?
Yes it does scratch. After finish recording video, I slide them back to normal position. Apply topcoat to fix those scratches and never touch it again
👍
Hello , daban 6616 is worth to buy?
I dont know. I’ve never built daban.
@@Armstudiogunplaspeedbuild i thought It's 6616 😊
Can I ask you what it is you sprayed onto the pieces at 2:32 ?
Tamiya ts-80 flat clear
@@Armstudiogunplaspeedbuild thanks for the reply! And do i need to have a colored paint after this clear coat or will the clear coat make the pieces “pop”?
@@Abcdefghijklmnopqrstubwxyz123 The clear coat as known as topcoat is the last thing you apply on the parts. It comes after colored paint, panel line and decals. It makes everything become same level of flatness or shininess depend on type of topcoat you use.
Bro what differences between topcoat you are using and the one from mr.hobby
There are many from mr.hobby. Which one would you like to compare?
The regular version
@@daffams1988 I assume that you mean the blue one which has similar price and amount. It is water-base paint. The one that I use is lacquer paint from Tamiya. I feel like Tamiya has smoother paint. I'm not sure it becuz of type of paint. the paint itself or the nozzle.
What top coat do you use?
Tamiya TS-80 flat topcoat
@@Armstudiogunplaspeedbuild thanks! And what panel lining pen do you use?
@@Ally.Cat.252 tamiya panel line accent
請問你有沒有噴上任何顏色漆料？還是只是純粹噴上TS-80?
only TS-80
@@Armstudiogunplaspeedbuild❤
期待mg blitz gundam
Next one
What kind of decals do you use??
waterslide decal
How many layers of top coat do you use??
I apply around 2-3 layers.
Wait but the top coat can said not to spray on decals. I am missing something someone please explain?
Tamiya TS-80 Flat topcoat is lacquer paint. Lacquer paint is the most harmful compared to enamel and acrylic paint. Enamel paint mostly use for panel lining. There are not many acrylic paint for topcoat. I have tried some which was not that good. So, I believe that lacquer paint is common for topcoat. I have used lacquer paint topcoat on decal more than 50 kits, no problem at all. Until I tried new water slide decals brand. I noticed that it is quite thin compared to other brands. After applying topcoat, the decals become frayed. Also last month I built Tamiya car model. The water slide decals are also thin and the same problem happened. Do you think why do they write it on the can?. What is the real problem?
where did you get the decals for the build?
I bought it from shopee.
What brand water slides?
I used d.l model but i don’t recommend. It’s too thin and color is not really accurate. I recommend artisan club or evo
What kind of panel line type you used for this kit?
Tamiya panel line accent black
@@Armstudiogunplaspeedbuild from what I hear tamiya panel line can crack the bare plastic, is that true?
@@Eizyraa Yes but we can avoid that. From my experience, most cracks happened when ink stuck in seam line rather than panel line. When ink stuck in seam line, it takes longer time to dry which means more time to erode plastic. It could happen when you do panel line after assemble. It is better to do panel line before assemble for some parts. if you are not sure, just do panel line on each part first then assemble later
@@Armstudiogunplaspeedbuild thank you so much for the explanation, really helpful :)
What paint are you using to panel line?
Tamiya panel line accent
@@Armstudiogunplaspeedbuild thank you! Also for the green paint you used, did you add mr.thinner? If so about how much do i need to use to dilute and which number diluter? Thank you again! Awesome video! Getting ready to do mine and i want to make sure i do it right!
@@skatedrable9651 The green paint is lacquer paint. I use basic mr.hobby lacquer thinner to dilute. The ratio of paint to thinner is around 1:2.
@@Armstudiogunplaspeedbuild thank you!!
at 4:29 what is the paint your using?
I like to do reverse wash on the eyes. Clear green is lacquer paint. Black is enamel paint.
ok thanks alot really appreciate it👍
bro what is it with the gunpla community and coke nails
Mine just lazy and cleaning ear and nose
What are you spraying after applying the decals?
Flat topcoat
@@Armstudiogunplaspeedbuild is it okay if I use a Gloss Topcoat?
@@RWG0914 yes it is ok