It will cost about 2 grand in materials, equipment, power supplies and coil wire - I can barely even get groceries each week - so if anyone wants to help with that as I keep losing more and more weight every day, then I'm sure I can show some remarkable results.
@@Johnnyroaf I'm already am in the middle of my third campaign www.kickstarter.com/projects/johnbidwell/the-worlds-first-tesla-coil-charge-collector for the new technology I've personally discovered and created - trying to get it finished through 2 hurricanes and constant chaos... But really, if someone whom can easily afford it could make 2 grand happen then I will do my best to blast high-voltage, high-amperage plasma (this is also key) into some stones and document it all. I'd say, at the very least, I can satisfyingly replicate some or all of the effects of this lost melding technology; especially for others to learn and expand on, as I understand the multi-step process of also letting the stones cool, heating the electrodes again (the area around) quickly to remove them (that's why the nubs are so localized) and much more... I just simply cannot afford myself to do it alone.
@@MadPlasmatistI'll subscribe and after a while, after watching your videos, I'll send some cash your way... I can afford $100. Have you showed your tech to anyone like Brian Forrester? If you can convince people like him, he might help promote your kickstarter. I'd love to see what you could do. If you could find enthusiasts in Florida to help you with some of the heavy lifting, some might give their time if they don't have much money to give
@@MadPlasmatist Im in for crowd funding, just post some info, i can afford something, not much but something, and can also spread info to other people
So this hypothesis raises more questions than it answers. * Where did they get enough power? * Why do we not have physical or graphical records of the power sources? * How did this technology get transferred all around the globe and then get lost? * Most rock is an insulator. How do they create a plasma arc between the electrodes? * Assuming they can melt the rock, how to they prevent spattering? * How do they keep the rocks from melting together? * Wouldn't molten rock pool from gravity? * Why can't they eliminate the nubs while the rock is still soft? * If they can create air pockets inside the rock, why didn't they do that to pyramidal stone blocks? Probably a lot more questions. This is what I came up with in about a minute.
Can sandstone be used? Why would they need to it’s so easy to carve ? So think it’s a mistake to look at sandstone structures in this manner ? Also many of the holes on sandstone structures are literally made for moving them around- such as Angkor wat in Cambodia - here there are elephants so they used the elephants to drag the stones about by attaching chains to the rock and drag with elephant power - but the igneous rocks I can truly imagine would have been made this way you propose - also have I seen the Egyptian ‘lightbulb’ in thin it’s in dendera temple but a quick google will show it - looks like a plasma device to me !!! Electrodes cables and all
Experiments shows that those building materials like granite and sandstone loose their structure and properties after heat was applied. At least when you use traditional sources of heat. If theory about 'electrods' is correct, those builders used some other method rather then melting. All you can achieve with melting is piece of glass with some other particles inside, it's very frigile.
@@personperson2884 Right, if you melt a rock, it's not like melting an ice cube where it will snap back into the same crystalline structure and arrangement of molecules when it cools again... the same rock that was formed at temperatures and pressures deep in the crust, if we take it and melt it, when it cools at different temperatures and pressures on the surface, it will be a different mineral altogether.
The biggest question that needs to be addressed is what source of electricity did ancient people use to generate the plasma? Furthermore, how did they compress the air necessary to create plasma? Your story leaves a lot of unanswered questions.
There are many ways to generate power, I'm not sure how they did it, however I am experimenting with charge differentials - there was a reason for these structures being so tall, and there is a charge differential between the ground and the atmosphere which can be harnessed. I'm sure someday this power source will also be discovered.
@@MadPlasmatistdidn't a guy named Tesla already have a lot of that stuff figured out? I'll ASSume you know what happened to him. I truly hope you've figured out something from the past that will help humanity, and that you don't get rubbed out or ripped off in the process. Some of those ideas may be possible, and known by some people who don't want everyone to know. If you find out how to harness power from the atmosphere you're definitely going to need good bodyguards. And a safe place.
You keep saying "I have discovered". There is a difference between discovering and theorizing. At the moment, you have a working theory that may or may not be correct. Show us in practical application and then you can say that you have discovered how it is done.
@@michielderuyter6011"Well, carboard is harder than a sponge!" "Not if they're both wet!" Can I point out that neither one is hard? IOW, all of those theories are just that... theories. However, with no evidence to support either theory, it's a little bit more outrageous to suggest that the stones were welded together with high voltage electricity, than pounded into place with the available bronze age tools.
The rods in the Great Pyramid Queen's chamber shaft are not a mystery. They were used by the Edgar brothers to probe the shafts after they were opened in the 19th century, and some of the rods got stuck on the bends in the shaft and broke off, so they could not retrieve them.
In the Roman era, stone blocks were fitted with iron pins to help lock them into place. After Rome fell, during the dark ages, iron was scarce, and people began digging into the stone blocks, to extract the pins. That is why many buildings, like the colloseum, have all those pock-marks. I'm not certain as to the reason for some of the other marks, where that is not the obvious explanation.
Yup ... marginally plausible ideation is one thing. Proof is another. Heuristic value is there to stimulate more ideas and studies. Since bellows were well known ... how about a huge sand blaster device?
I found hexagonal holes and a metal line that looks similar to a gas line near some broken cliff faces of the grand canyon. Would be happy to share the pics if you're interested in looking.
We really need to see evidence. For example, the power source. I know they were smarter than we give them credit for, but high voltage source has to be shown
@@RobertStewart-i3m In theory, very ancient technically advanced civilization could exist. Less advanced people called them Gods. Really you can see that more ancient megalithic blocks are more heavy and made more complex and accurate than newer ones lying on top and they accord technical level of ancient people we usually imagine
@@traycyberon Yes, there were several advanced nations prior to the great flood/floods; whenever Those occurred. If you'd like to see some of the proof, I strongly recommend 1 book from Graham Hancock: Underworld. It even has evidence from a Glaceologist about the floods; aside from the younger dryas event. Of course, this book's written prior to his hiawasca experiments.
If stones would be melded and casted into shapes, then many stones would have the exact same shape. Because the same forms would be used over again. As a stonemason I know these typical holes as slots where something, especially wooden structures or ornaments, have been fitted in after the building was already done. You will find these in thousands of medieval castles. You will also find other kinds of holes and stubs there. They were used to create places, where the lifting devices were used.
@@truthhunterhawk3932 Bruh. The castles used to be plastered and even painted. Just like the ancient temples. The holes were no problem at all. There are buildings with holes on every single stone for our special tongs. These use the stone's own weight to tighten their grip.
@@asoliloquy2876 It's not hard to explain. They had machines. I have no doubt there. I also think they used electricity in the pyramides. You can call me a foil head, if you like. But I learned my profession and there it no other logical reason for copper conductions in the pyramides. The ancient batteries prove that they knew electicity.
Lifting large, finished edge stones would most surely have a tendency to cut the fiber ropes of the time with ease, or just plainly get in the way underneath the stones when placed, so I can't help but logically believe that the "nubs" were used for the ropes to be tied or slung for precise applications. The "Holes" could've simply been scaffolding mounts or used with iron rods for the purpose of lifting the finished stones into place. We should look into if the "Nubbed" stones were favored in an area with less iron access or smelting experience, or it would also make applicable sense that the "Nubbed" stones pre-date the stones with precision drill holes in them. Or not.... just my opinion.
Except the nubs are only on a few of the stones per wall. If they were used to carry they would be on every stone. The nubs are also found in Egypt, Greece, Italy, Indonesia, Mexico etc. All with precise polygonal stone work 🤷🏾♂️
@@NoQualmsTheArtist Of course, removal of said nubs, would most assuredly have happened in the finishing process unless things like wars, invasions, cataclysm, famine or disease, which were quite prevalent in those days occurred. I know I wouldn't be worried about finishing touches of an old wall while my family was being slaughtered, starving, or dying of a plague.
Unless the holes are on the unfinished sides. There is no plasma construction hear. The nubs are what is left of lifting points that have been knocked off a polished down.
The power source is obviously the big question, and how they made plasma. I'd really love to see this work out with modern equipment. Duplicating the old techniques and technology would be very interesting, but now we probably have better materials and stuff to do it even better than before. Making those stones is one thing, moving them is another but we have machines now. I want to see this happening. And I want you to survive showing us.
I'm just wrapping up a Kickstarter project to raise funds for a larger power supply and coil wire, this is just Part 1, stay tuned, I am actively recreating this technology =)
Now that makes sense Former pattern maker. Had to build all sorts of wooden moulds to put concrete in. On taller ones we used all thread thru a PVC pipe to help support the sides. Makes perfect sense
This! We already know about the Roman concrete, which was absolutely amazing and unmatched by modern concrete. The stones are ancient concrete, too. They were poured in place, hence the tight fittings with adjacent "stones". This is quite obvious to me, and I suspect it is to many others. Still waiting for "the science" to figure it out, it might take them another 500 years of sweet juicy government paid for "research".
You might be right. However, you somehow failed to anticipate Questions: 1. Why would the knobs be allowed to exist if they were formed while the stone was so soft? Couldn't they be patted down with something? Obviously it was decided the knobs would be allowed to remain in place for some reason. Even if they weren't going to be visible, it seems too much of an imperfection. What could the reasoning be? 2. You assert(without evidence) that the rod left behind inside the shaft was actually an ancient electrode. Maybe you're right, but does it (coincidentally)match any known modern metal tools? 3. Any thoughts on what the structures' functions were? 4. How was the electricity generated? 5. How were stones moved across great distances with the technology you describe? Was there a portable weight-reduction technique? 6. The finished structures must have had some function which was not functioning during the construction of the structure itself, right? I'm all ears to your exploration of these things because you seem to be the only person with a reasonable-sounding explanation for the strange details like the holes and knobs. However, as I said, you failed to anticipate any questions. That seems strange to me. You must know you haven't come close to explaining everything, so you should have at least mentioned some of the elements you're still working on.
I invite you to come chat on my website to help answer these questions as there is quite a lot here and I'll try to sum things up quick - I apologize for the late response and would like to go through your post here in greater detail; I am very busy with my Kickstarter project, you should follow along in the updates section there - anyway here goes =) 1) I think the knobs (which I also stated would be unseen in the video) were also used for structural support, such as if you were to cover the wall with a thick metal (gold? lost gold cities?) or other material, it would need places to adhere. 2) The rods in the shafts were more than likely on-site (in or around the pyramid complex) and then shoved up there by the curious explorers (who document using the rods as probes but not where they came from - they are the exact dimensions of these smaller square and hexagonal holes... 3) Pyramids / oldest of the structures, were primarily used for wireless power transfer of the surrounding area (for miles)... 4) In earlier times, the entire sky was said to have looked like the 'aurora borealis' as it had a much higher charge before several cataclysms - then, and even today, you can still harness 'charge differentials' between ground and sky though nowdays you must go to the top of a mountain (and sea level ground) to even begin to get harness-able energy (however at about a kilometer, you can access kilovolts - there is a video on youtube here that visualizes that I think by RimStarOrg or similar name. (I also have a 'future of energy' video here that demonstrates 1 way to physically harness charge differentials) 5) The stones could be moved in many ways, such as placing a positive charge above, giving them a greater negative charge than the environment around it (making lighter) or more than likely, easily moved by one of the many growing (videoed and more) witness accounts of UAP's, UFO's and any flying thing which I have seen lift cows, cars and made a plane disappear... (Look for the 3 ufo's circling a plane and then poof!) however, like the previous methods and as everything else, harnessing the power of charge differentials to not only generate electricity but control it is key =) 6) Not sure what you mean, come and chat on my website WCSG-Science.com The video was really meant as a guide for others (not much anticipation of questions) to start recreating the technology, those with high-voltage knowledge will get the message clearly and the future will therefore get the benefit =)
...He is pretty convincing, his personality and voice actor skills are magnificent...My first question right away was, what was at the other end of the electrodes? Then I read your very articulate comment & questions which brings us right back too square one...Although it is a very good, produced video... Artist, Old Naples Florida 🌴Retired hands - on builder & architect & Faux painter of marbleized collum's🎨
Pyramids used for pulling energy from the earth or more likely atmospheric energy, possibly a combination of multiple sources and methods. It sure does help explain those giant stone “sarcophagus”, which where likely capacitors of some sort. And why so many of these megalithic sites look like circuit boards from above. Great video! Thank you.
The sarcophagi are most likely tombs because you can find very similar red imperial porphyry stone sarcophagi that were made for Roman emperors in today's Istanbul. Just search for imperial red porphyry sarcophagi and compare the design and shape with the stone boxes in Saqqarra. Red porphyry stone can only be found in a quarry in Egypt and was very rare so that stone was strictly reserved for the emperors and Roman church. Emperor Nero's bathtub was carved out of red porphyry stone and it is the most valuable antique object in the Vatican and most valuable in the world. The sarcophagi in Istanbul are looking very similar to the stone boxes in Saqqarra. What do you think
Could it be, that the "ancient handbag" that you also see everywhere in ancient carvings, could it be that this was the positive charge device to lift heavy stones with ease? Of course it would need very, very much energy but the pyramid could be a huge power plant. Maybe i am wrong, but why show an "ancient handbag" in carvings in Mexico, India, Egypt.... - we see it everywhere so it has to be something very important. And the gods are holding it...
This is awesome! It is great to see someone testing their theories in the real world... All those holes and nubs are a problem that needs to be solved- I appreciate what you are doing!
Good theory. How did they cut the stones in the first place? Why don't all of the building stones have electrode holes in them? How did they drill the holes in a hexagonal shape? .......just wondering.??
I'm still discovering a few of these things however the electrodes, in many cases, appear to be 'pushed' into the rocks in some way (mostly granite), more than likely while the electrodes were active. This is just Part 1 and my Kickstarter campaign to help advance this research further will be complete in about another day - as I build a more powerful system, we will get to see more powerful results =) Also, the heat application process wasn't necessarily needed in every stone, only mostly around the seams (usually set lower in the rock as heat moves upwards) though many of these plugs on newer structures have not eroded enough to where you can easily see them yet, perhaps unless up close. Another note, is they should possibly be detectable by magnets or a compass if any metals remain in the stones today (and I can even see flecks of metal on many granite walls, look closely at the ones in this video for example, you can even see 'swirl' marks where it looks like they melted the electrode into the rock and it has since rusted away) - stay tuned!
something like a thermal lance...again, plasma torch, but the changes to the rock crystalline structure would be obvious. Granite has relatively large crystals, but after melting it should be like glass...obviously different from the country/ surrounding/ source bedrock granite
Ok, say they had electric power and were able to create plasma. Even then: This needs not only "power", it needs a lot of it and for a long time. I am not convinced.
The Great Pyramid was most likely a power generator using different types of quartz and granite. Look into it. Using that as the power source then all of this becomes possible.
I cannot say where they obtained their components, all I know is that high voltage was involved and I'm recreating this technology for the current use of mankind =)
Nicola Tesla claimed a hundred years ago that it would be possible generate practically unlimited power using plasma. He had built a functional coil and an experimental transmission tower and those inventions, for as many reasons as there are foil hats, are no where to be found. Also, the bronze age is mostly just a Western myth, bronzes best quality is its corrosion resistance and therefore longevity. Couple that with abundant mining in the Mediterranean and Middle East and you got the bronze age. There is good evidence that iron was being worked 8000 years ago in China. For all steel is a modern miracle, set uncoated steel outside for a week and there is surface rust, a couple months and there is scale and pitting, and in a hundred years there are only traces in the ground water
Didn't you mean copper age? The bronze age was much later. Which begs the question that the mainstay narrative fails to answer and that is how was so much precision engineering done by a civilisation(s) so far behind us technologically and why aren't we capable of recreating it if we are so advanced?
I do appreciate the hands on effort and there needs to be more of that. However I have a couple issues. First of all, granite can not be melted. At least not in the sense of a producing some moldable or mushy consistency and then expect it to "set" in a mold, or a form, or even a nice glob on the ground. There won't be any globbing, or moldable version of granite whatsoever. There's only granite, exploding granite, and in the end you will have just crumbling granite that can not be reconstituted in any way. I suppose it could be ground up and a binder added...but then your back at geopolymers again. Second, there has not been one inch of copper wire found anywhere, in all the world. Or gold wire or bronze, or orichalcum....or wire made of anything that could possibly carry even a small current. This is why I never held much faith in the "Bagdad battery". Because they aren't much more than a potato battery with very low voltage and negligible current, but there STILL isn't any wire found or anything that could be used as conductors....definitely no high voltage conductors. So no power tools, no electro plating, not even a potato battery. That's not to say everything is as we've been told, or as it seems. It's not that we know how everything worked, with our big ol' modern brains, either. Not at all. Just make it make sense.
Well, I can only hope my future work will be more impressive to you as your awareness grows - this is just part 1, take a look around the rest of my channel for more world history and stay tuned for more =)
There are copper items all over the ancient world including two copper electrodes at the end of the shafts leading from the chambers in the Great Pyramid. All rock on earth was liquid at some point.
This is fascinating. I definitely believe you're on to something here. I have been looking into electrostatic induction and different ways it reacts to different elements. To me these ancients were very concerned with energy and knowledge regarding energy. It would be ignorant to think they didn't have knowledge of what we now call electricity. Even Tesla himself studied Egypt, he even wrote his idea of the coil came from his studies of Egypt. Anyhow, enjoyed your theory. Thank you.
For years I’ve thought that the oddly shaped blocks of stone in the walls in South America and elsewhere look as though they’d been moulded, like plasticine, but I couldn’t think how. Thanks for the information!
The stones may have a been prepared with some solutions that created a malleable enough to form them like clay? I also think that moving them may have voltage and resonance frequencies to levitate the the stone to move them in place may have some merit..😎🇺🇸
This is going to be very vague but about 50 years ago I read a book about an English explorer who got lost in South America and his son then set out to find him. The name, I think, began with an F. Anyway, during the book a local shows the son a rock into which birds have somehow made holes to create their nests. He explains that the birds take the leaf of a local plant, dip it in water and then rub it against the rock and keeps doing this until a hole appears.@@Dbean48 We still have so much to discover! As to how the great stones were moved to the Pyramid and elsewhere, I agree that only levitation of some kind would do it. But how about the mind? Only a few years I discovered that I was pretty good at dowsing (for anything). It works but no-one knows how. More mind over matter...
@@Dbean48Oooor they were quarried carved and transported to its destination with primitive tools and technology like oxes and other animals!? Just like the Romans transported gigantic obelisks from Egypt to Rome. Just like Mussolini's obelisk was transported in the 1930's. A 350-400 ton monolith was quarried at a quarry on a mountain then was transported down the mountain in a wooden casket on wooden sleds then was moved by 70ish pairs of oxes through a small village they even managed to turn the gigantic monolith sharp corners only with primitive tools, wooden logs, lubricant and animals all the way to the boat which then went to Rome. By the way you can watch the transportation of Mussolini's obelisk here on UA-cam if you like 😉 No vibrations resonances...
I see two problems here. one, many of the sites contain huge stones that would have required massive equipment just to melt the stones. Then there's the issue of how they formed them after melting. Why do we not find any such molding equipment? Two, the electrical generation equipment would have to have been massive to generate high enough voltage to accomplish large scale melting of stone. Then there's the technology required to build such equipment. There are no signs anywhere of such equipment or any sites where they might have been used. Lastly, why hasn't this been used in modern times to conveniently shape stone for use?
Finally someone else has this theory, and has the background in plasma and high voltage experience to tire so many details together. Looking forward to seeing more.
This is the best explanation of ancient technology I've seen in the last decade of researching ancient enigmas. You should get on a podcast with people like randall carlson, Graham Hancock, Lacroix.. etc etc.
You're on to something here, I have been working on similar ideas but was having problems applying HF HV to stone in a controlled manner, the idea of electrode holes should solve that. Thank you for pointing out the importance of the electrode cross section shape!
It's not just the electrode holes, it is the high voltage, high amperage spark gap driving a coil that performs 'work' or heating =) Check out my website or visit my chat room to discuss things further if you'd like.
@@MadPlasmatist I might be a few steps ahead of you, except I'm using tuned HF instead of a spark gap. Getting any efficient transfer from the electrodes has been challenging... but this may solve it, I'll let you know as soon as I can figure out how to drill hexagonal holes in granite 🤣🤣
There are hands and feet impressed into the "rock" in many places with this melted look. Must be cold when was touched. May be a kind of solvent which turns the rock into something that behaves like clay or plasticine.
Occam's razor, my friend. People carved hand prints and feet prints in cold stone with chisels or rocks. Been doing it since before written language. No kind of mystery.
Yes, but I don't know when. It will take about 2 grand for coils and equipment however I've been kept so poor I can't even wash clothing or eat properly... If you know anyone that can help, tell them to please!
Thats probably the best explanation ive see yet. Who knows what capabilities the master builders had with electrodes, frequencies etc..as they were the experts, here the scientist is in early experimentation. I def think its a high possibility tho. Good job
I love that you passionately believe in your work. I subscribed, because I fully agree with what you've said so far. Please keep on. Your baby steps will one way or another contribute to better understranding. You don't have to have all the answers at the moment. I'm sure your work will pave the way.
Amazing video and work you've done, I definitely think you're on to something. This is the best explanation I've heard yet. Just curious, what's that song in the background at the end of the video?
Fantastic research dude. We have all wondered about this and you apparently solved it , I have believed the rock became plastisized somehow and anti-grav thru a variety of frequncies resonating, then move in place.
That was a fantastic theory definitely seems completely possible now if only the power source was realized. An those long rods in the pyramid shafts are from when some guys i cant recall the names tried finding a way to tell where the shafts headed . Not ancient rods left behind .
The problem I see with any "melting stone" ideas for any igneous rocks like granite, schist, etc is that when magma cools quickly it makes obsidian. In order to form crystals like those found in all igneous rocks other than obsidian, magma/lava/melted rock needs to cool far more slowly than would happen when exposed to earyhs surface temperatures.
Nope. Obsidian forms from felsic magma that is rich in silica (SiO2), typically rhyolitic in composition with 65-80% silica content. This high silica content makes the magma very viscous. The magma is also low in volatiles like water, usually less than 1% by weight. This allows the lava to cool rapidly without much gas expansion. The key requirement is that the silica-rich, highly viscous rhyolitic magma needs to cool very rapidly, not allowing time for crystal formation. This fast cooling usually happens when the lava is erupted at the Earth's surface. Obsidian most commonly forms as an extrusive igneous rock from lava flows or volcanic domes. The magma is erupted onto the surface where the temperature is much lower, facilitating rapid cooling. The rapid cooling and high viscosity impedes the movement of atoms to form crystals, so the lava solidifies as a glass rather than a crystalline rock. Very few or no crystals form. The end result of the fast cooling with no crystallization is a natural volcanic glass with an amorphous internal structure rather than a regular crystal structure. In summary, obsidian forms when viscous, silica-rich rhyolitic magma with low water content erupts onto the Earth's surface and undergoes very rapid cooling, solidifying into a glass without crystallizing. These specific magma properties and cooling circumstances are necessary to produce the distinct glassy texture and appearance of obsidian.
@@robertcutts7264 in any case, melting granite to form perfectly fitting stones isn't an answer because the poured stones would cool rapidly and under no pressure resulting in something other than granite, something with no crystal structure or microscopic crystal structure due to fast cooling.
@@markdeffebach8112 And that is exactly how we can tell that these surfaces have in fact been vitrified. Vitrification produces a glassier matrix, similar to what you describe (but technically NOT obsidian), and just like what is found. That's the point.
@@robertcutts7264 except that every argument for melting granite claims that a coarse grained granite was vitrified and yet remained that coarse grained as it cooled much faster than would allow for the courseness of the grains found in the rock.
Thank you for your genius level approach. It makes sense, and, likely makes the ears of those afraid of such findings, stand up. Breaks their reality, worries many I am sure. Worked with HV, familiar to me. I'll look at kickstarter. Keep care. Use great discernment in choosing who you work with and publishing findings to as many people as possible.
This is only 'part 1', we also did not have the technology to heat granite like this before, the high-voltage, high-amperage WCSG (water cooled spark gap) I invented led me to uncover the SGL, which is all founded in proven science (just the fact an SGL doesn't ignite into flames proves ancient technologies are real) as an SGL is the next step up from my WCSG =) Thank you for the comment - have a look around my channel in the meantime, enjoy and stay tuned for 'part 2' =)
@@oltedders High voltage, high amperage plasma from a unique spark gap (an SGL, more tech I have discovered and physically implemented, look at the video) has more than just the power to melt stone =)
Ropes were tied around the nubs and the stones were swung back and forth, one at a time as they were laid down, grinding the faces against one another. You can actually determine the order in which they were placed by looking at the seams. And as someone else mentioned, the holes were to brace some sort of facade made of a different material, like carved marble panels. You don't always find both at the same site, or even in the same cultures. You often find the nubs and the 'melted looking' stones in Peru, for instance. Marble facades would have been more common in Roman cultures. Not that seeing plasma flowing around different minerals isn't interesting.
This is only 'part 1' and they were also 'preliminary samples' to observe the affects of heated plasma, I am literally recreating this technology from the ground up - stay tuned for more =)
@@lutumfamiliaris7287 Many of the ones from Peru do, though, which would be inexplicable otherwise. In places where they wanted the wall to look nice, they would have carved them off after they were done.
I've studied Coral Castle and honestly don't know what to make of it. The rough coral hides the indicative marks of these ancient stone techniques and it would have to be a place I'd need to see first-hand to discern anything more. I wonder too =)
@@MadPlasmatist Yes, I haven't studied it in detail either, but it is an intriguing connection. As for the 'formed' stones, it'd be interesting to check if the ancient 'polygonal' masonry, for example, that's present around the world, also involves stones of the same Si Al etc composition, and whether those stones can be locally quarried. If not, then it seems clear that the stones were formed from a worldwide standard mixture that was set using the high voltage/current electrodes. By the way, your research is excellent!
Overall, a nice theory. But I think what is lacking is the actual analysis of the stones themselves. I recently watched a lot of evidence presented by a French chemist, who discovered organic materials embedded in the "stone"that was considered to be diorite. The only reasonable way to explain the presence of organic materials that would have ever been destroyed by high heat is that they were actually a biopolymer that was a soft clay, added to incrementally and pressed into place. This explanation resonates well with the evidence for many sites but not all of them. The biggest exception to this is balbec in Lebanon. Those sandstone blocks that were moved defy modern explanation and were most definitely not made of clay. But many of the stones if not all of the stones in Cusco bear this mark of organics.
I see many people trying to disagree with @MadPlasmatist by offering what they think is "logical arguments", but its quite clear from their responses that many have never visited and examined (=carefully observed) megalithic monuments. The assumption of the exact era of construction is not valid, as well as the assumption of the technological knowledge of that time. Please keep in mind not only that stone can NOT be dated, but also that any dating that falls outside the boundaries of the mainstream archaeological beliefs is officially immediately dismissed. So not only the "how" and "why" these monuments where constructed is unknown, but also "when". @MadPlasmatist, your theory is very interesting and although not all holes are for electrode purposes and also not all blocks have holes or protrusions, it doesn't mean that your theory is not valid! Carrying/moving/placing the stones is a different matter to "moulding" them. Different techniques, different technology. Not all megalithic structures seem to have applied the "moulding" techique. According to myths and legends, many of the megalithic monuments where constructed with "magical sounds" or deities playing magical instruments and producing sound that elevated/moved the stones into place, effortlessly (meaning, frequencies and resonance technology). Perhaps they where moulded with electrical currents after that...or before, who knows!? As for the power source used, it could be a number of things (e.g: Tesla's ether, electromagnetism, static electricity, lightning strikes, and things we cant even imagine). Not being able to imagine something, doesn't make it false or not-real!! Until recently, people firmly believed that the world is flat and if we sail too close to the edge we will fall off, into the abyss...that didn't make the world actually more flat or more round. And the world didn't start to be round (spherical) after the discovery of its true shape. A truth is the truth, no matter if we comprehend it or not, it always stays the same. The FACT is that these megalithic structures EXIST and that huge blocks were QUARRIED, TRANFERRED and POSITIONED in ways we do NOT understand and for reasons we do NOT understand...beyond that, everything is an assumption... As for powering, I would like to add that granite and limestone have distinct electrical properties. Especially huge blocks like the megalithic sites (their mass alone can distort electromagnetic fields). As far as i understand it, granite can store unusually high amounts of static electricity, while limestone has high conductivity especially when under pressure (piezo-electrical properties - similar concept to making your own orgone-producing artefact). I might be very wrong as the the particular properties attributed to granite and limestone, but for sure they have unique properties, or properties in higher amounts that other rocks (i think Archie was onto something). Also, many many ancient monuments in question are ridded with something that resembles small canals, made of stone, making everyone assume they were used for transferring water. BUT, what IF they had poured copper into these canals, not water, they would be creating giant insulated cables... Long story short, with arrays of giant blocks of granite and limestone in particular arrangements and the help of ancient "cables", the ancients could be creating structures with energy or electrical conductivity and/or storing/amplifying capabilities. Now, if these giant blocks are acting as cables, insulators and batteries, we can only begin to imagine what properties the whole structure could have! Especially if they were arranged into "sacred" shapes like a proper pyramid (pyr-amis = fire-inside). The megalithic world is intricately fascinating, not only for the sheer volume and size, not only for the technology applied to the construction, but for the level of applicable knowledge of those people/cultures. Definitely they would see us as extremely weird and primitive in our understanding of the earth, cosmos, natural laws and applications of our technology... Thank you for your video and experiments!! 😁
Dating of stones can be done using thermoluminescence techniques, to an accuracy of about +/- 10% up to about a time depth of 500,000 years, depending on the circumstaces. Look up "thermoluminescence dating" on Google.
I have seen an anomalous artifact that is a piece of granite with metal prongs coming out of it, very much like electrical plugs we use today. I think it is in a video amongst things that come from coal and deep places, geologic strata they are not supposed to be in. This is a very interesting video and I always did think that the stone surfaces we see now, would have been covered by any number of things, possibly even gold, silver, bronze, etc. I had not realized that buildings had so many holes in them, probably thanks to video editing and also 'restoration'. I think it was a resonance factor, when lifting the stones
@@oltedders my comments deleted as all my others, i cant remember what i written here, im pretty censored,but yes his explanation or theory is crap or lies
Very interesting theory. Also do you remember that unfinished gigantic obelisk in Egypt quarry which have been left there because crack. Researchers said that it has marks like its shaped with big spoons. Is it possible they somehow make stone softer with electricity and then shape it? Second big question was: How they transport it? Levitation/antigravity with using some frequencies?
Great finding, I saw in an other vlog how they’re melting Basalt at 2400 degrees and poured it in a sand casing. Mesmerizing, Anyway great to see all different experts, researchers and hobbyists looking for the true meaning behind all these great mysteries.👍🍀thnx for your part.
Great idea. Is it possible they used lightning or was the earth experiencing some plasma event or technology used do you think. Would this be possible using concrete if you charged the rebar.
We should try to extract the hexagonal rod found in the Queen's chamber and analyze it as a first step in proving your theory. Good observations so far!!
I am in the process of doing higher-voltage testing and will be able to relatively estimate these numbers soon (they will no doubt possibly be in the millions to billions) as this is also what a full size SGL (Spark Gap Lingam, see the How It Works video) was designed to handle, just as a spark gap alone - the voltage output induced by a tesla coil using this setup would be even higher. I'm not super-familiar with the Inca paste theory, however paste doesn't leave half-carved monuments in massive rock quarries =) There may have been geo-polymers or other types of mixtures used for some purposes, though I honestly have not found any conclusive evidence of this (except with limestone), at least not shown in the granite / similar blocks and materials quarried and even the rocks 'melted into a large pile' (several of these in India) that were then used or harvested for the main structures and walls...
@@MadPlasmatist www.i2massociates.com/downloads/On_the_reddish_glittery_mud_the_Inca_use.pdf is the best link to the dec 2017 paper by Helmut Tributsch. Since reading it I've been waiting for some kind of product to be available based on the chemistry therein, for DIY granite construction projects, at all lawn and garden stores. Not holding my breath lol.
Yesss!!! I had visions of this technology a few years ago and went down a rabbit hole of learning about geopolymers (concrete) that was set with electricity. I didn’t find much on the electricity part of it, but I’m sure it’s how they did it. Did they use an Egyptian style ankh with a crystal in the middle to harness the “Tesla” energy and focus it to zap the blocks?
Have you considered soaking the granite in water? It considerably lowers the melting point of granite , and also might allow current to flow through better.
I think the closest anyone has come to explaining how these rocks became shaped was the use of naturally occurring acid that would be applied to the surface of the stones which allowed for their surfaces to become plyable and gelatinous. After curing, the surfaces even show signs of vitrification. I think was is more plausible is that they gathered a lot of smaller stones and mixed them with the acid which basically turned them into a flowing geopolymer and allowed the stones to be poured, slowly and shaped with trowels or other tools as the pour was starting to harden on the outside. When you see what looks like molten voids missing from these stones, that's where a bit too much acid may have been used and resulted in part of the polymer to sluff off the stone. The nobs are likely the result of pouring the stones into a form of some kind and the two holes, one is to allow for air to leave the form as rock pours in and the other is where they are pouring the stones into the form. When the holes are located near the top of bottom of each stone, that's where the course below was poured into and stopped short of filling the form entirely and leaving two ram shaped horns from the bottom course to then be overflowed from the next stone being poured above it. In this way, those knobs would serve not only as a funnel to fill the form, but also as a link of a chain providing the resulting structure with more strength. That, or those knobs are there to simply make the gigantic stones easier to move. Just like placing a pebble beneath a giant block to use it as a pivot point.
That has always been my leading hypothesis as well, but doesn't hold water when you look at the irregular shape of the blocks. If you poured the geopolymer, you would use molds that were uniform.
Interesting, all that is nice, you figured it out. My question is, where is the power plant that would be needed to generate that much electricity, and we’re did the technology come from for all your equipment. There structure are at least 3000+ yrs old
"my incredible contributions" is an apt quote, but it is an intriguing puzzle for the ages, and this is a fair theory steeped in fundamental science that is worth a lot more work to constitute proof.
I am also the inventor of the WCSG (Water cooled spark gap), discoverer of the SGL (spark gap lingam) and not only am I now recreating ancient stone melding technology for the betterment of mankind, I have also created 2 new science experiments using this new, higher-amperage WCSG technology =) Explore the rest of my channel, my website, my past Kickstarter projects... There's a lot more to come - thank you and enjoy =)
You need to modulate the frequency of your voltage to match that of the stone you are trying to "meld". I suggest starting with a low amplitude voltage first until you find the resonant frequency of the stone then ramp it up until it starts to deform. A phase locked loop on the feedback current on the probes will allow you to dial it right in.
The electric side is also a carrier... So what happens if you inject a frequency or 2, then manipulate them to harmonics of the target material's resonance?
They must have flown away with the aliens who taught ancient people how to make magical disappearing electrodes that have never been found, nor even represented in ancient art or writings.
Hey plasmatist, there's a ton of issues with your idea. That being said, I applaud your awareness of ancient stonework. I implore you to try anything to recreate it. If you do recreate it. How are you certain is it precisely how or what they did. 2 methods 1 result. Do you care about how they did it? Or just recreating it with modern technology they may have never had. Love to discuss ideas with you. Thing is, I take everything I know they must have known into account before I assume they know magic and aliens. So all of my methods may be way simpler methods. All untested. All highly likely. All my methods are plausible. I like how you declare there is no room for plausibility. Haha. I am the god of time, mastery over chronology. Ahhh they knew things. I decrypt their decayed brains and read their burned books. Interesting it is, 🌐 worldwide. Interesting it is all metal gone. Interesting holes, you know I know of many UA-cam channels who study these rocks and structures and artifacts. Ancients think we are retarded for not understanding what is obvious method to them. They knew magma / lava was rock. They knew rock could be melted. There are vitrified remains in places. They utilized more than 1 technique for these 'projects' The entire thing reeks of automation. Scaling. These polygonal are difficult to explain. Artifacts even moreso. Your technology can't recreate ALL of it. Possibly some though. Had they a crazy power source. Thing is too. You are implying these were constructed prior to a cataclysm otherwise you admit you have to be wrong. Chronology...101 I smoke it. They know water cuts rock. Doesn't explain everything though. Can you find a method using compiled ancient knowledge or must you resort to technology of the day to explain such masterpieces. Ahhh tube drills. They speak. Saw marks. Doesn't explain polygonal or nubs. Fucking nubs!!! Yes. Why not just smooth it out? They can cut it flat obviously everywhere else. They did it to fuck with you 10000 years in the future. They said haha nobody will ever figure out how we made this........they're right. We haven't. Too many stones. Too big. Too perfect. You can't cut perfect corners like in the serpium of Sakara. They are unbelievably smart.
The polygonal or hexagonal holes are easy to explain. Drill a round hole, insert a slightly smaller hexagonal electrode. As the rock heats up and becomes pliable it "melts" around the electrode, then later solidifies. Remove the electrode and voila! A deep hexagonal hole, which leaves everyone to wonder: "How did they drill that?"
Great theory. Plasma is likely part of it and I suspect EVOs as well. Some other questions in addition to add: 1. What about the stones without electrode holes? Did these holes collapse when the electrode was removed? 2. If so, why are some holes still open while others are closed? I suspect multiple processes were used at various times through the thousands upon thousands of years of antiquity, with multiple intended uses over time, the knowledge of which may have been wiped out by multiple cataclysms with the meaning buried in alchemy and multiple subtle meanings in Egyptian hieroglyphs. Looking forward to your continuing studies.
There are plugs that haven't eroded / are newer constructions (the holes and nubs were never meant to be seen - if you can find the video of Praveen Mohan where he shows square, sealed, I think pointed cylinders - this is a good example of this plug technology and also, every lingam base is made this way, the holes are there; look at eroded and broken ones... Keep in mind, just as these great civilizations were all built with the same stone methods, they were also controlled and destroyed like toys... As we are today...
@@MadPlasmatist thanks. I’ll search around for Praveen’s work. Do you think that the huge nubs on the megaliths in China at Yangshan Quarry were also originally hidden by casing/veneer? Any evidence or research along these lines that you’ve come across? Also any thoughts on how your plasma research might mesh with EVOs?
@@Blackboxinquisitive No, the quarry was just left raw though there was machinery (placed on the shelf looking areas) which may have required these protrusions as actual features (though once again, only for temporarily removing the stone) - and EVO's - in one of the first videos on the new science of "Electro-tesla-mechanics" (I also discovered and named) I ask what if a tesla coil could fly... =) That is all I think I can even nearly say, it is up to you and the world perhaps now...
@@MadPlasmatist interesting. Any research/evidence backing up your theories on the quarry? There’s certainly some interesting aluminum OOPARTS that might explain the regular markings in the quarry and in the Longyou caves.
@@Blackboxinquisitive I may not have understood what you meant by EVO, I thought it was another slang for UFO, UAP etc etc - a part 2 will be in the works someday that should explain (and demonstrate I sincerely hope) all of these questions plus more... It will take about 2 grand in coil wire and equipment - at the time-being I can barely eat each day so...
How close would the rock have to be to its final shape to achieve the results we see in amcient structures? I believe there is more going on with ancient megalithic structures than can be explained with scientific reasoning.
There are 2 possible explanations - very to moderately close or, at these incredibly high voltages and / or application methods; it might be possible to create a 'cell' affect in which the stones are pulled / held in a geometric, naturally cell-shaped pattern by the electricity. I have seen what appears to be both, however the first example in which they are moderately cut close then 'puff out' like a marshmellow under heat from their own weight (also explaining their straight planes / not lumpy on the sides like just rough stones stacked) would seem to be the predominate method.
There are many possibilities, the atmosphere for one, before cataclysms, had a much higher charge (said to look like the aurora borealis) and if you'll notice there are always metal spikes at the top of all ancient structures, which they could have used to simply 'pull' charge from the sky; another is simple charge differentials, where if you place one wire high up (using balloons?) like even on a mountain top, you will have quite a substantial charge differential - if you look at my 'future of power' video, you can see how this can be harnessed to perform physical work (or generate elec with a generator) =) Hope these few examples help!
Awsome stuff!! Just stumbled on you page omg Awsome Many years ago I saw a clip on vhs I can remember the gentleman’s name but he was doing similar with rocks and hi voltage and the slightly levitate and the structure of the rock totally changed.... Many year on I find your work and it’s amazing.... Have you ever noticed Hindu god Shiva holds a tri tip trident 🔱 very similar to the one in your clips 🤔 Super interesting I know it’s expensive.. However I wound how you exact set up would work with gold as rods and conductors. Thank you for your efforts
You will need a bunch of money to make a working model of all of this. Start selling t-shirts on each video with print on demand, monetize your videos AND ask for donations or start a patreon site for members only? I'd LOVE to see you build this to scale and make it work!!!!!!!!!!! One mistake: a famous explorer left the pole inside the pyramid. He mentions it in his journals. Might want to check it out yourself. It's been a minute since I saw that so, fact check me as well. LOL. I really want you to do this to scale. Ever thought about trying to get sponsors on those start up capitol sites or something??? What about that famous singer who searches for aliens and stuff? Maybe he would sponsor? Heck, find anyone willing to do it. What about the history channel?
The pieces are comming out front. Nice. I kept thinking heat...the electrodes were shaped like tuning forks. More clues are in the area of the dendora lights. The wiring diagram is on the wall. Someone with the knowledge shared with the Dogons...shared it civilization at the time. What was no mention of sudden delush that destroyed the technology. The sun, planet and water (electricity) Great job! The carving of caves of ancient time look like forks going top to bottom on a block of butter. Well done!!
Can you just make a small megalithic wall for us to see so the debate can end ?
It will cost about 2 grand in materials, equipment, power supplies and coil wire - I can barely even get groceries each week - so if anyone wants to help with that as I keep losing more and more weight every day, then I'm sure I can show some remarkable results.
@@MadPlasmatist Happy to help. Why dont you kick off a crowdfunding?
@@Johnnyroaf I'm already am in the middle of my third campaign www.kickstarter.com/projects/johnbidwell/the-worlds-first-tesla-coil-charge-collector for the new technology I've personally discovered and created - trying to get it finished through 2 hurricanes and constant chaos... But really, if someone whom can easily afford it could make 2 grand happen then I will do my best to blast high-voltage, high-amperage plasma (this is also key) into some stones and document it all. I'd say, at the very least, I can satisfyingly replicate some or all of the effects of this lost melding technology; especially for others to learn and expand on, as I understand the multi-step process of also letting the stones cool, heating the electrodes again (the area around) quickly to remove them (that's why the nubs are so localized) and much more... I just simply cannot afford myself to do it alone.
@@MadPlasmatistI'll subscribe and after a while, after watching your videos, I'll send some cash your way... I can afford $100.
Have you showed your tech to anyone like Brian Forrester? If you can convince people like him, he might help promote your kickstarter.
I'd love to see what you could do. If you could find enthusiasts in Florida to help you with some of the heavy lifting, some might give their time if they don't have much money to give
@@MadPlasmatist Im in for crowd funding, just post some info, i can afford something, not much but something, and can also spread info to other people
So this hypothesis raises more questions than it answers.
* Where did they get enough power?
* Why do we not have physical or graphical records of the power sources?
* How did this technology get transferred all around the globe and then get lost?
* Most rock is an insulator. How do they create a plasma arc between the electrodes?
* Assuming they can melt the rock, how to they prevent spattering?
* How do they keep the rocks from melting together?
* Wouldn't molten rock pool from gravity?
* Why can't they eliminate the nubs while the rock is still soft?
* If they can create air pockets inside the rock, why didn't they do that to pyramidal stone blocks?
Probably a lot more questions. This is what I came up with in about a minute.
This answers #2 and #3: A cataclysm which killed 98% of the population.
Granted, if the huge stones were actually hollow, that could explain how they were put into place easier!
Can sandstone be used? Why would they need to it’s so easy to carve ? So think it’s a mistake to look at sandstone structures in this manner ? Also many of the holes on sandstone structures are literally made for moving them around- such as Angkor wat in Cambodia - here there are elephants so they used the elephants to drag the stones about by attaching chains to the rock and drag with elephant power - but the igneous rocks I can truly imagine would have been made this way you propose - also have I seen the Egyptian ‘lightbulb’ in thin it’s in dendera temple but a quick google will show it - looks like a plasma device to me !!! Electrodes cables and all
Experiments shows that those building materials like granite and sandstone loose their structure and properties after heat was applied. At least when you use traditional sources of heat. If theory about 'electrods' is correct, those builders used some other method rather then melting. All you can achieve with melting is piece of glass with some other particles inside, it's very frigile.
@@personperson2884 Right, if you melt a rock, it's not like melting an ice cube where it will snap back into the same crystalline structure and arrangement of molecules when it cools again... the same rock that was formed at temperatures and pressures deep in the crust, if we take it and melt it, when it cools at different temperatures and pressures on the surface, it will be a different mineral altogether.
The biggest question that needs to be addressed is what source of electricity did ancient people use to generate the plasma?
Furthermore, how did they compress the air necessary to create plasma?
Your story leaves a lot of unanswered questions.
natural like Tesla from earth. They knew how.
There are many ways to generate power, I'm not sure how they did it, however I am experimenting with charge differentials - there was a reason for these structures being so tall, and there is a charge differential between the ground and the atmosphere which can be harnessed. I'm sure someday this power source will also be discovered.
Yes that's exactly what I was thinking too?🤔
There’s some speculation that the great pyramid generated power.
@@MadPlasmatistdidn't a guy named Tesla already have a lot of that stuff figured out? I'll ASSume you know what happened to him. I truly hope you've figured out something from the past that will help humanity, and that you don't get rubbed out or ripped off in the process.
Some of those ideas may be possible, and known by some people who don't want everyone to know. If you find out how to harness power from the atmosphere you're definitely going to need good bodyguards. And a safe place.
You keep saying "I have discovered". There is a difference between discovering and theorizing. At the moment, you have a working theory that may or may not be correct. Show us in practical application and then you can say that you have discovered how it is done.
This is much more than the poundingstone “theorie” or copper chissles “theorie”
How about the drillholes with poundingstones?😂
"My incredible contribution to science" ❤️❤️❤️😂
Here comes the armchair scholar….
I suppose you would say the same to orthodox archaeologists or they are already accepted as gospel to you?
@@michielderuyter6011"Well, carboard is harder than a sponge!"
"Not if they're both wet!"
Can I point out that neither one is hard?
IOW, all of those theories are just that... theories. However, with no evidence to support either theory, it's a little bit more outrageous to suggest that the stones were welded together with high voltage electricity, than pounded into place with the available bronze age tools.
Dumb spelling makes people disregard you. Purposeful infantile behavior stunts your soul.
Grow up.@@michielderuyter6011
Many of these holes, especially in Rome were for the mounting of marble facades.
Possibly for both purposes
And ropes pulleys and scaffolding
@@xmo552 lol no, they dont have enough electricity for it, which was none.
@@yeetman4953
How many times did I say anything about electricity? None.
@@xmo552 what was the other reason
The rods in the Great Pyramid Queen's chamber shaft are not a mystery. They were used by the Edgar brothers to probe the shafts after they were opened in the 19th century, and some of the rods got stuck on the bends in the shaft and broke off, so they could not retrieve them.
Yes, I think there might be documentation from the time?
Where did the Todd come from? Found in or near tomb perhaps?
@@d_beez The rod is still stuck in one of the Queen's chamber "air shafts".
Those rods were made from steel were they not?….. I don’t believe that the ancient Egyptians had steel….
Correct
In the Roman era, stone blocks were fitted with iron pins to help lock them into place. After Rome fell, during the dark ages, iron was scarce, and people began digging into the stone blocks, to extract the pins. That is why many buildings, like the colloseum, have all those pock-marks. I'm not certain as to the reason for some of the other marks, where that is not the obvious explanation.
I would also guess that some were to hold wooden planks for platforms or cloth covers from the sun.
I thought the same. Maybe rods went through to hold floors/ceilings up. Maybe the nubs fit into a hole to attach panels for walls.
They’re “still” laughing! Your theory is a joke.
@@joehenry2058 Who is laughing at what?
Our guide at the coliseum in 2021 told us those pock marks were used for the mounting of sheets of marble
OK, then meld a stone and show us the results.
I think that might require a very sizeable financial investment.
thanks for the heads up, i take it this was clip bait again , again , again
For sure. Sounds good, but talk is cheap.
Yup ... marginally plausible ideation is one thing. Proof is another. Heuristic value is there to stimulate more ideas and studies. Since bellows were well known ... how about a huge sand blaster device?
It's up to us to take this inspiration, come together, and try try try.
I found hexagonal holes and a metal line that looks similar to a gas line near some broken cliff faces of the grand canyon. Would be happy to share the pics if you're interested in looking.
Always interested in every possible piece of the puzzle! You may use the contact form on my website and we can e-mail further, thanks =)
Interesting !
Please share!
I want to see please
Those are blasting holes for controlled land sliding?
at least someone is working on it and trying to solve the ancient tech secrets. Shows how clever the ancient people are.
No ,it shows how gullible people are.
We really need to see evidence. For example, the power source. I know they were smarter than we give them credit for, but high voltage source has to be shown
@@RobertStewart-i3m Yes, evidence! And a totemic statue is not evidence .
@@RobertStewart-i3m In theory, very ancient technically advanced civilization could exist. Less advanced people called them Gods. Really you can see that more ancient megalithic blocks are more heavy and made more complex and accurate than newer ones lying on top and they accord technical level of ancient people we usually imagine
@@traycyberon Yes, there were several advanced nations prior to the great flood/floods; whenever Those occurred. If you'd like to see some of the proof, I strongly recommend 1 book from Graham Hancock: Underworld. It even has evidence from a Glaceologist about the floods; aside from the younger dryas event. Of course, this book's written prior to his hiawasca experiments.
If stones would be melded and casted into shapes, then many stones would have the exact same shape. Because the same forms would be used over again.
As a stonemason I know these typical holes as slots where something, especially wooden structures or ornaments, have been fitted in after the building was already done. You will find these in thousands of medieval castles. You will also find other kinds of holes and stubs there. They were used to create places, where the lifting devices were used.
🏅
In many cases I expect, but probably not in the outsides of walls and pillars, that wouldn't make sense
@@truthhunterhawk3932 Bruh. The castles used to be plastered and even painted. Just like the ancient temples. The holes were no problem at all.
There are buildings with holes on every single stone for our special tongs. These use the stone's own weight to tighten their grip.
Just as hard to explain how they had tube drilling technology. Square holes bored out and even more complicated shapes around
@@asoliloquy2876 It's not hard to explain. They had machines. I have no doubt there. I also think they used electricity in the pyramides. You can call me a foil head, if you like. But I learned my profession and there it no other logical reason for copper conductions in the pyramides.
The ancient batteries prove that they knew electicity.
Lifting large, finished edge stones would most surely have a tendency to cut the fiber ropes of the time with ease, or just plainly get in the way underneath the stones when placed, so I can't help but logically believe that the "nubs" were used for the ropes to be tied or slung for precise applications. The "Holes" could've simply been scaffolding mounts or used with iron rods for the purpose of lifting the finished stones into place. We should look into if the "Nubbed" stones were favored in an area with less iron access or smelting experience, or it would also make applicable sense that the "Nubbed" stones pre-date the stones with precision drill holes in them. Or not.... just my opinion.
Fully agree .
Except the nubs are only on a few of the stones per wall. If they were used to carry they would be on every stone. The nubs are also found in Egypt, Greece, Italy, Indonesia, Mexico etc. All with precise polygonal stone work 🤷🏾♂️
@@NoQualmsTheArtist Of course, removal of said nubs, would most assuredly have happened in the finishing process unless things like wars, invasions, cataclysm, famine or disease, which were quite prevalent in those days occurred. I know I wouldn't be worried about finishing touches of an old wall while my family was being slaughtered, starving, or dying of a plague.
Unless the holes are on the unfinished sides. There is no plasma construction hear. The nubs are what is left of lifting points that have been knocked off a polished down.
The power source is obviously the big question, and how they made plasma.
I'd really love to see this work out with modern equipment. Duplicating the old techniques and technology would be very interesting, but now we probably have better materials and stuff to do it even better than before. Making those stones is one thing, moving them is another but we have machines now. I want to see this happening. And I want you to survive showing us.
I want to see a demonstration using TODAY’S equipment, before I will consider whether they could do it with THEIR equipment.
Baghdad battery
@@theneurologist1 The Baghdad battery could only produce around 1v with a low current.
@@macmaccourt I didn't know that! Thank you!!!
This technique makes the most sense. I would love to see a real rock melting experiment like this. Thanks for sharing!
I'm just wrapping up a Kickstarter project to raise funds for a larger power supply and coil wire, this is just Part 1, stay tuned, I am actively recreating this technology =)
Will be interresting to se how you can maintain the crystalline structure in granite after melting it again, i see problems ahead.@@MadPlasmatist
@@MadPlasmatist rock loses its properties when heated
@@yeetman4953 Not granite.
@@MadPlasmatist sources needed
Interesting indeed. I look forward to seeing more data from further experiments. Thanks!
fairy tales nothing real until thy show real scale proof
I believe that all these blocks are poured in place or on site. The holes you see are for tie-rods to stop the forms bursting open.
Hmm possible
Now that makes sense
Former pattern maker. Had to build all sorts of wooden moulds to put concrete in. On taller ones we used all thread thru a PVC pipe to help support the sides. Makes perfect sense
Depends on whether all the holes shown, go all the way through the rock. If not then they were not for tie rods.
Why would they be randomly sized ?
This! We already know about the Roman concrete, which was absolutely amazing and unmatched by modern concrete. The stones are ancient concrete, too. They were poured in place, hence the tight fittings with adjacent "stones". This is quite obvious to me, and I suspect it is to many others. Still waiting for "the science" to figure it out, it might take them another 500 years of sweet juicy government paid for "research".
You might be right. However, you somehow failed to anticipate Questions:
1. Why would the knobs be allowed to exist if they were formed while the stone was so soft? Couldn't they be patted down with something? Obviously it was decided the knobs would be allowed to remain in place for some reason. Even if they weren't going to be visible, it seems too much of an imperfection. What could the reasoning be?
2. You assert(without evidence) that the rod left behind inside the shaft was actually an ancient electrode. Maybe you're right, but does it (coincidentally)match any known modern metal tools?
3. Any thoughts on what the structures' functions were?
4. How was the electricity generated?
5. How were stones moved across great distances with the technology you describe? Was there a portable weight-reduction technique?
6. The finished structures must have had some function which was not functioning during the construction of the structure itself, right?
I'm all ears to your exploration of these things because you seem to be the only person with a reasonable-sounding explanation for the strange details like the holes and knobs. However, as I said, you failed to anticipate any questions. That seems strange to me. You must know you haven't come close to explaining everything, so you should have at least mentioned some of the elements you're still working on.
I invite you to come chat on my website to help answer these questions as there is quite a lot here and I'll try to sum things up quick - I apologize for the late response and would like to go through your post here in greater detail; I am very busy with my Kickstarter project, you should follow along in the updates section there - anyway here goes =)
1) I think the knobs (which I also stated would be unseen in the video) were also used for structural support, such as if you were to cover the wall with a thick metal (gold? lost gold cities?) or other material, it would need places to adhere.
2) The rods in the shafts were more than likely on-site (in or around the pyramid complex) and then shoved up there by the curious explorers (who document using the rods as probes but not where they came from - they are the exact dimensions of these smaller square and hexagonal holes...
3) Pyramids / oldest of the structures, were primarily used for wireless power transfer of the surrounding area (for miles)...
4) In earlier times, the entire sky was said to have looked like the 'aurora borealis' as it had a much higher charge before several cataclysms - then, and even today, you can still harness 'charge differentials' between ground and sky though nowdays you must go to the top of a mountain (and sea level ground) to even begin to get harness-able energy (however at about a kilometer, you can access kilovolts - there is a video on youtube here that visualizes that I think by RimStarOrg or similar name. (I also have a 'future of energy' video here that demonstrates 1 way to physically harness charge differentials)
5) The stones could be moved in many ways, such as placing a positive charge above, giving them a greater negative charge than the environment around it (making lighter) or more than likely, easily moved by one of the many growing (videoed and more) witness accounts of UAP's, UFO's and any flying thing which I have seen lift cows, cars and made a plane disappear... (Look for the 3 ufo's circling a plane and then poof!) however, like the previous methods and as everything else, harnessing the power of charge differentials to not only generate electricity but control it is key =)
6) Not sure what you mean, come and chat on my website WCSG-Science.com
The video was really meant as a guide for others (not much anticipation of questions) to start recreating the technology, those with high-voltage knowledge will get the message clearly and the future will therefore get the benefit =)
@@MadPlasmatist erm .. have u done a MRI scan lately? ... thers something missing ..
I think the pymarids were a ventilation system for the burried city around them.@MadPlasmatist
I think the knobs are so ropes wont slide off
...He is pretty convincing, his personality and voice actor skills are magnificent...My first question right away was, what was at the other end of the electrodes? Then I read your very articulate comment & questions which brings us right back too square one...Although it is a very good, produced video... Artist, Old Naples Florida 🌴Retired hands - on builder & architect & Faux painter of marbleized collum's🎨
Pyramids used for pulling energy from the earth or more likely atmospheric energy, possibly a combination of multiple sources and methods. It sure does help explain those giant stone “sarcophagus”, which where likely capacitors of some sort. And why so many of these megalithic sites look like circuit boards from above. Great video! Thank you.
Yes. Would work in Egypt, but where are the power sites elsewhere across the globe?
The sarcophagi are most likely tombs because you can find very similar red imperial porphyry stone sarcophagi that were made for Roman emperors in today's Istanbul. Just search for imperial red porphyry sarcophagi and compare the design and shape with the stone boxes in Saqqarra. Red porphyry stone can only be found in a quarry in Egypt and was very rare so that stone was strictly reserved for the emperors and Roman church. Emperor Nero's bathtub was carved out of red porphyry stone and it is the most valuable antique object in the Vatican and most valuable in the world.
The sarcophagi in Istanbul are looking very similar to the stone boxes in Saqqarra. What do you think
Could it be, that the "ancient handbag" that you also see everywhere in ancient carvings, could it be that this was the positive charge device to lift heavy stones with ease? Of course it would need very, very much energy but the pyramid could be a huge power plant.
Maybe i am wrong, but why show an "ancient handbag" in carvings in Mexico, India, Egypt.... - we see it everywhere so it has to be something very important. And the gods are holding it...
that's where they kept their grocery lists
This is awesome! It is great to see someone testing their theories in the real world...
All those holes and nubs are a problem that needs to be solved- I appreciate what you are doing!
Good theory. How did they cut the stones in the first place? Why don't all of the building stones have electrode holes in them? How did they drill the holes in a hexagonal shape? .......just wondering.??
I'm still discovering a few of these things however the electrodes, in many cases, appear to be 'pushed' into the rocks in some way (mostly granite), more than likely while the electrodes were active. This is just Part 1 and my Kickstarter campaign to help advance this research further will be complete in about another day - as I build a more powerful system, we will get to see more powerful results =) Also, the heat application process wasn't necessarily needed in every stone, only mostly around the seams (usually set lower in the rock as heat moves upwards) though many of these plugs on newer structures have not eroded enough to where you can easily see them yet, perhaps unless up close. Another note, is they should possibly be detectable by magnets or a compass if any metals remain in the stones today (and I can even see flecks of metal on many granite walls, look closely at the ones in this video for example, you can even see 'swirl' marks where it looks like they melted the electrode into the rock and it has since rusted away) - stay tuned!
something like a thermal lance...again, plasma torch, but the changes to the rock crystalline structure would be obvious. Granite has relatively large crystals, but after melting it should be like glass...obviously different from the country/ surrounding/ source bedrock granite
Ok, say they had electric power and were able to create plasma. Even then: This needs not only "power", it needs a lot of it and for a long time. I am not convinced.
The Great Pyramid was most likely a power generator using different types of quartz and granite.
Look into it.
Using that as the power source then all of this becomes possible.
@@NemoNoone-p3p What the great pyramid powers construction using the stones in Peru?
@@andylewis6831 ...Im not sure what you are saying or asking?
Where did they get their electronic?
And the steel rods?
With them being in the bronze age.
I cannot say where they obtained their components, all I know is that high voltage was involved and I'm recreating this technology for the current use of mankind =)
Nicola Tesla claimed a hundred years ago that it would be possible generate practically unlimited power using plasma. He had built a functional coil and an experimental transmission tower and those inventions, for as many reasons as there are foil hats, are no where to be found.
Also, the bronze age is mostly just a Western myth, bronzes best quality is its corrosion resistance and therefore longevity. Couple that with abundant mining in the Mediterranean and Middle East and you got the bronze age. There is good evidence that iron was being worked 8000 years ago in China. For all steel is a modern miracle, set uncoated steel outside for a week and there is surface rust, a couple months and there is scale and pitting, and in a hundred years there are only traces in the ground water
The bronze age? History is all a lie, you should know that by now. The ancients were far more advanced than we are today
Didn't you mean copper age? The bronze age was much later. Which begs the question that the mainstay narrative fails to answer and that is how was so much precision engineering done by a civilisation(s) so far behind us technologically and why aren't we capable of recreating it if we are so advanced?
I do appreciate the hands on effort and there needs to be more of that. However I have a couple issues. First of all, granite can not be melted. At least not in the sense of a producing some moldable or mushy consistency and then expect it to "set" in a mold, or a form, or even a nice glob on the ground. There won't be any globbing, or moldable version of granite whatsoever. There's only granite, exploding granite, and in the end you will have just crumbling granite that can not be reconstituted in any way. I suppose it could be ground up and a binder added...but then your back at geopolymers again.
Second, there has not been one inch of copper wire found anywhere, in all the world. Or gold wire or bronze, or orichalcum....or wire made of anything that could possibly carry even a small current. This is why I never held much faith in the "Bagdad battery". Because they aren't much more than a potato battery with very low voltage and negligible current, but there STILL isn't any wire found or anything that could be used as conductors....definitely no high voltage conductors. So no power tools, no electro plating, not even a potato battery. That's not to say everything is as we've been told, or as it seems. It's not that we know how everything worked, with our big ol' modern brains, either. Not at all.
Just make it make sense.
Well, I can only hope my future work will be more impressive to you as your awareness grows - this is just part 1, take a look around the rest of my channel for more world history and stay tuned for more =)
carbon rod as conductor
There are copper items all over the ancient world including two copper electrodes at the end of the shafts leading from the chambers in the Great Pyramid.
All rock on earth was liquid at some point.
This is fascinating. I definitely believe you're on to something here.
I have been looking into electrostatic induction and different ways it reacts to different elements. To me these ancients were very concerned with energy and knowledge regarding energy. It would be ignorant to think they didn't have knowledge of what we now call electricity. Even Tesla himself studied Egypt, he even wrote his idea of the coil came from his studies of Egypt. Anyhow, enjoyed your theory. Thank you.
For years I’ve thought that the oddly shaped blocks of stone in the walls in South America and elsewhere look as though they’d been moulded, like plasticine, but I couldn’t think how. Thanks for the information!
The stones may have a been prepared with some solutions that created a malleable enough to form them like clay? I also think that moving them may have voltage and resonance frequencies to levitate the the stone to move them in place may have some merit..😎🇺🇸
This is going to be very vague but about 50 years ago I read a book about an English explorer who got lost in South America and his son then set out to find him. The name, I think, began with an F. Anyway, during the book a local shows the son a rock into which birds have somehow made holes to create their nests. He explains that the birds take the leaf of a local plant, dip it in water and then rub it against the rock and keeps doing this until a hole appears.@@Dbean48 We still have so much to discover! As to how the great stones were moved to the Pyramid and elsewhere, I agree that only levitation of some kind would do it. But how about the mind? Only a few years I discovered that I was pretty good at dowsing (for anything). It works but no-one knows how. More mind over matter...
@@Dbean48sources needed.
Me, t!
@@Dbean48Oooor they were quarried carved and transported to its destination with primitive tools and technology like oxes and other animals!? Just like the Romans transported gigantic obelisks from Egypt to Rome. Just like Mussolini's obelisk was transported in the 1930's. A 350-400 ton monolith was quarried at a quarry on a mountain then was transported down the mountain in a wooden casket on wooden sleds then was moved by 70ish pairs of oxes through a small village they even managed to turn the gigantic monolith sharp corners only with primitive tools, wooden logs, lubricant and animals all the way to the boat which then went to Rome. By the way you can watch the transportation of Mussolini's obelisk here on UA-cam if you like 😉 No vibrations resonances...
That makes more sense than anything they've taught me in school
your catching on ..
HAHAHAHA!!!! Really? That made more sense? HAHAHA!!!
Then you really didn't learn much in school.
Thought police 🚔
Why didn’t your parents find a better school?
I see two problems here. one, many of the sites contain huge stones that would have required massive equipment just to melt the stones. Then there's the issue of how they formed them after melting. Why do we not find any such molding equipment? Two, the electrical generation equipment would have to have been massive to generate high enough voltage to accomplish large scale melting of stone. Then there's the technology required to build such equipment. There are no signs anywhere of such equipment or any sites where they might have been used. Lastly, why hasn't this been used in modern times to conveniently shape stone for use?
Finally someone else has this theory, and has the background in plasma and high voltage experience to tire so many details together. Looking forward to seeing more.
This is the best explanation of ancient technology I've seen in the last decade of researching ancient enigmas. You should get on a podcast with people like randall carlson, Graham Hancock, Lacroix.. etc etc.
You're on to something here, I have been working on similar ideas but was having problems applying HF HV to stone in a controlled manner, the idea of electrode holes should solve that. Thank you for pointing out the importance of the electrode cross section shape!
It's not just the electrode holes, it is the high voltage, high amperage spark gap driving a coil that performs 'work' or heating =) Check out my website or visit my chat room to discuss things further if you'd like.
@@MadPlasmatist I might be a few steps ahead of you, except I'm using tuned HF instead of a spark gap. Getting any efficient transfer from the electrodes has been challenging... but this may solve it, I'll let you know as soon as I can figure out how to drill hexagonal holes in granite 🤣🤣
@@Bewolfmaybe start with the hex electrode and try to “push” it in. Might need a melt away flux. Wish you luck.
@@Bewolfperhaps the just burned the electride into tbe rock.
There are hands and feet impressed into the "rock" in many places with this melted look. Must be cold when was touched. May be a kind of solvent which turns the rock into something that behaves like clay or plasticine.
Occam's razor, my friend. People carved hand prints and feet prints in cold stone with chisels or rocks. Been doing it since before written language. No kind of mystery.
Well, that surely is a mystery. Chisels and rocks, useless job to imitate a hand smearing some sort of mud. Too many miracles in just one sentence...
Cool! I’ve been thinking something similar; super heated carbon rods; like a heliarc. This is way better with the anti grav effect. Outstanding!
Never would have thought that...well done!!
Awesome video! Is Part 2 still in the works?
Yes, but I don't know when. It will take about 2 grand for coils and equipment however I've been kept so poor I can't even wash clothing or eat properly... If you know anyone that can help, tell them to please!
P.S.
I’ve been waiting for this for a long time.
Thank you.
Thats probably the best explanation ive see yet. Who knows what capabilities the master builders had with electrodes, frequencies etc..as they were the experts, here the scientist is in early experimentation. I def think its a high possibility tho. Good job
What explanation? Some pudding?
Imagine what all those places like that around world looked like new
Good work, this goes a long way towards explaining the megalith mystery. Looking forward to your power source research.
They were a technolithic civilizations, not retarded like current 'scientists' claim.
I love that you passionately believe in your work. I subscribed, because I fully agree with what you've said so far. Please keep on. Your baby steps will one way or another contribute to better understranding. You don't have to have all the answers at the moment. I'm sure your work will pave the way.
Where's the test? Can you make a big rock melt?
That's excellent. You can also make objects lighter by changing its resonant frequency.
Thats a lot of power needed, so what was the storage system and generation system the capacitors should be left laying around!
Amazing video and work you've done, I definitely think you're on to something. This is the best explanation I've heard yet. Just curious, what's that song in the background at the end of the video?
Fantastic research dude. We have all wondered about this and you apparently solved it , I have believed the rock became plastisized somehow and anti-grav thru a variety of frequncies resonating, then move in place.
That was a fantastic theory definitely seems completely possible now if only the power source was realized. An those long rods in the pyramid shafts are from when some guys i cant recall the names tried finding a way to tell where the shafts headed . Not ancient rods left behind .
wonder how many Bagdad battery's would be needed ?
The problem I see with any "melting stone" ideas for any igneous rocks like granite, schist, etc is that when magma cools quickly it makes obsidian. In order to form crystals like those found in all igneous rocks other than obsidian, magma/lava/melted rock needs to cool far more slowly than would happen when exposed to earyhs surface temperatures.
Nope. Obsidian forms from felsic magma that is rich in silica (SiO2), typically rhyolitic in composition with 65-80% silica content. This high silica content makes the magma very viscous. The magma is also low in volatiles like water, usually less than 1% by weight. This allows the lava to cool rapidly without much gas expansion. The key requirement is that the silica-rich, highly viscous rhyolitic magma needs to cool very rapidly, not allowing time for crystal formation. This fast cooling usually happens when the lava is erupted at the Earth's surface. Obsidian most commonly forms as an extrusive igneous rock from lava flows or volcanic domes. The magma is erupted onto the surface where the temperature is much lower, facilitating rapid cooling. The rapid cooling and high viscosity impedes the movement of atoms to form crystals, so the lava solidifies as a glass rather than a crystalline rock. Very few or no crystals form. The end result of the fast cooling with no crystallization is a natural volcanic glass with an amorphous internal structure rather than a regular crystal structure. In summary, obsidian forms when viscous, silica-rich rhyolitic magma with low water content erupts onto the Earth's surface and undergoes very rapid cooling, solidifying into a glass without crystallizing. These specific magma properties and cooling circumstances are necessary to produce the distinct glassy texture and appearance of obsidian.
@@robertcutts7264 in any case, melting granite to form perfectly fitting stones isn't an answer because the poured stones would cool rapidly and under no pressure resulting in something other than granite, something with no crystal structure or microscopic crystal structure due to fast cooling.
@@markdeffebach8112 And that is exactly how we can tell that these surfaces have in fact been vitrified. Vitrification produces a glassier matrix, similar to what you describe (but technically NOT obsidian), and just like what is found. That's the point.
@@robertcutts7264 except that every argument for melting granite claims that a coarse grained granite was vitrified and yet remained that coarse grained as it cooled much faster than would allow for the courseness of the grains found in the rock.
yes, major changes, even major chemical changes melting in oxygen at surface temps and conditions. basically new rocks
Very interesting, thanks for making your work public!
Thank you for your genius level approach. It makes sense, and, likely makes the ears of those afraid of such findings, stand up. Breaks their reality, worries many I am sure. Worked with HV, familiar to me. I'll look at kickstarter. Keep care. Use great discernment in choosing who you work with and publishing findings to as many people as possible.
This is only 'part 1', we also did not have the technology to heat granite like this before, the high-voltage, high-amperage WCSG (water cooled spark gap) I invented led me to uncover the SGL, which is all founded in proven science (just the fact an SGL doesn't ignite into flames proves ancient technologies are real) as an SGL is the next step up from my WCSG =) Thank you for the comment - have a look around my channel in the meantime, enjoy and stay tuned for 'part 2' =)
Excellent work you're doing.
Wow this is actually being considered plausible? Thanks drugs
This is only part 1, it is all logical and I am recreating the technology, there is no room for plausibility, it is fact =)
Psychedelics: the power to melt stone!
@@oltedders High voltage, high amperage plasma from a unique spark gap (an SGL, more tech I have discovered and physically implemented, look at the video) has more than just the power to melt stone =)
Interesting hypothesis, but still a hypothesis until you have a working theory. I wish you luck.
so you need electricity, high electricity to be exact, from where you think they got it from?
Ropes were tied around the nubs and the stones were swung back and forth, one at a time as they were laid down, grinding the faces against one another. You can actually determine the order in which they were placed by looking at the seams. And as someone else mentioned, the holes were to brace some sort of facade made of a different material, like carved marble panels. You don't always find both at the same site, or even in the same cultures. You often find the nubs and the 'melted looking' stones in Peru, for instance. Marble facades would have been more common in Roman cultures.
Not that seeing plasma flowing around different minerals isn't interesting.
This is only 'part 1' and they were also 'preliminary samples' to observe the affects of heated plasma, I am literally recreating this technology from the ground up - stay tuned for more =)
Most of the stones did not have nubs for "ropes".
@@lutumfamiliaris7287 Many of the ones from Peru do, though, which would be inexplicable otherwise. In places where they wanted the wall to look nice, they would have carved them off after they were done.
@@MadPlasmatist Cool. Hope it works.
It'd be interesting to see if Edward Leedskalnin also used high voltage, high current to shape and move the rocks of his Coral Castle.
I've studied Coral Castle and honestly don't know what to make of it. The rough coral hides the indicative marks of these ancient stone techniques and it would have to be a place I'd need to see first-hand to discern anything more. I wonder too =)
@@MadPlasmatist Yes, I haven't studied it in detail either, but it is an intriguing connection. As for the 'formed' stones, it'd be interesting to check if the ancient 'polygonal' masonry, for example, that's present around the world, also involves stones of the same Si Al etc composition, and whether those stones can be locally quarried. If not, then it seems clear that the stones were formed from a worldwide standard mixture that was set using the high voltage/current electrodes. By the way, your research is excellent!
Эдвард использовал не плазму а звук! Звуковую вибрацию...
Так же как и строители пирамид!
Overall, a nice theory. But I think what is lacking is the actual analysis of the stones themselves. I recently watched a lot of evidence presented by a French chemist, who discovered organic materials embedded in the "stone"that was considered to be diorite. The only reasonable way to explain the presence of organic materials that would have ever been destroyed by high heat is that they were actually a biopolymer that was a soft clay, added to incrementally and pressed into place. This explanation resonates well with the evidence for many sites but not all of them. The biggest exception to this is balbec in Lebanon. Those sandstone blocks that were moved defy modern explanation and were most definitely not made of clay. But many of the stones if not all of the stones in Cusco bear this mark of organics.
So many puzzling details but fantastic theory, brilliant ideas - Lets work these issues through - I definitely believe you to be heading the right way
The only restriction is funding, I estimate it will take about $2,000 in parts and equipment to recreate on even an adequately small scale...
What's the site @4:47
I see many people trying to disagree with @MadPlasmatist by offering what they think is "logical arguments", but its quite clear from their responses that many have never visited and examined (=carefully observed) megalithic monuments. The assumption of the exact era of construction is not valid, as well as the assumption of the technological knowledge of that time. Please keep in mind not only that stone can NOT be dated, but also that any dating that falls outside the boundaries of the mainstream archaeological beliefs is officially immediately dismissed. So not only the "how" and "why" these monuments where constructed is unknown, but also "when".
@MadPlasmatist, your theory is very interesting and although not all holes are for electrode purposes and also not all blocks have holes or protrusions, it doesn't mean that your theory is not valid!
Carrying/moving/placing the stones is a different matter to "moulding" them. Different techniques, different technology. Not all megalithic structures seem to have applied the "moulding" techique. According to myths and legends, many of the megalithic monuments where constructed with "magical sounds" or deities playing magical instruments and producing sound that elevated/moved the stones into place, effortlessly (meaning, frequencies and resonance technology). Perhaps they where moulded with electrical currents after that...or before, who knows!?
As for the power source used, it could be a number of things (e.g: Tesla's ether, electromagnetism, static electricity, lightning strikes, and things we cant even imagine). Not being able to imagine something, doesn't make it false or not-real!! Until recently, people firmly believed that the world is flat and if we sail too close to the edge we will fall off, into the abyss...that didn't make the world actually more flat or more round. And the world didn't start to be round (spherical) after the discovery of its true shape. A truth is the truth, no matter if we comprehend it or not, it always stays the same. The FACT is that these megalithic structures EXIST and that huge blocks were QUARRIED, TRANFERRED and POSITIONED in ways we do NOT understand and for reasons we do NOT understand...beyond that, everything is an assumption...
As for powering, I would like to add that granite and limestone have distinct electrical properties. Especially huge blocks like the megalithic sites (their mass alone can distort electromagnetic fields). As far as i understand it, granite can store unusually high amounts of static electricity, while limestone has high conductivity especially when under pressure (piezo-electrical properties - similar concept to making your own orgone-producing artefact). I might be very wrong as the the particular properties attributed to granite and limestone, but for sure they have unique properties, or properties in higher amounts that other rocks (i think Archie was onto something). Also, many many ancient monuments in question are ridded with something that resembles small canals, made of stone, making everyone assume they were used for transferring water. BUT, what IF they had poured copper into these canals, not water, they would be creating giant insulated cables... Long story short, with arrays of giant blocks of granite and limestone in particular arrangements and the help of ancient "cables", the ancients could be creating structures with energy or electrical conductivity and/or storing/amplifying capabilities. Now, if these giant blocks are acting as cables, insulators and batteries, we can only begin to imagine what properties the whole structure could have! Especially if they were arranged into "sacred" shapes like a proper pyramid (pyr-amis = fire-inside).
The megalithic world is intricately fascinating, not only for the sheer volume and size, not only for the technology applied to the construction, but for the level of applicable knowledge of those people/cultures. Definitely they would see us as extremely weird and primitive in our understanding of the earth, cosmos, natural laws and applications of our technology...
Thank you for your video and experiments!!
😁
Dating of stones can be done using thermoluminescence techniques, to an accuracy of about +/- 10% up to about a time depth of 500,000 years, depending on the circumstaces. Look up "thermoluminescence dating" on Google.
Solved? So why there's nobody around melting stones today?
Cuz they do their best to not let us be aware of our power cuz that makes us easier to control
Something you'd need to see done to believe.
I thought that'd what I was going to observe.
This is only part 1 in the series, I have a lot of work to do, you'll get to see it =)
I have seen an anomalous artifact that is a piece of granite with metal prongs coming out of it, very much like electrical plugs we use today. I think it is in a video amongst things that come from coal and deep places, geologic strata they are not supposed to be in.
This is a very interesting video and I always did think that the stone surfaces we see now,
would have been covered by any number of things, possibly even gold, silver, bronze, etc.
I had not realized that buildings had so many holes in them, probably thanks to video editing and also 'restoration'. I think it was a resonance factor, when lifting the stones
That's the most plausible explanation I have heard for softening rock used in the megalithic structures. Well thought out.
make a big stone SHOW IT
This is only 'Part 1', there is much work to do, it is really an entire new science =)
lol what a bunch of crap
Do explain, I don't understand your logic. I have presented nothing but facts?
@@MadPlasmatist BS and stop deleting all my comments, YOURE HERE TO HIDE THE TRUTH, dont claim youre onto something,Your just a liar
I'm sure that when you said "crap", you meant that in a good way.
@@oltedders my comments deleted as all my others, i cant remember what i written here, im pretty censored,but yes his explanation or theory is crap or lies
@@darrenn897
It's utterly ridiculous.
Fascinating. I have a question, wouldn’t all this electrical discharge be dangerous for those people working the stone.
This is fantastic, everyone needs to see this
Very interesting theory. Also do you remember that unfinished gigantic obelisk in Egypt quarry which have been left there because crack. Researchers said that it has marks like its shaped with big spoons. Is it possible they somehow make stone softer with electricity and then shape it? Second big question was: How they transport it? Levitation/antigravity with using some frequencies?
This is vary interesting. However you need to explain where the high voltage was obtained from.
Great finding, I saw in an other vlog how they’re melting Basalt at 2400 degrees and poured it in a sand casing. Mesmerizing, Anyway great to see all different experts, researchers and hobbyists looking for the true meaning behind all these great mysteries.👍🍀thnx for your part.
Your hypothesis has tremendous potential & I enjoyed your presentation, I look forward to seeing more of your work. 🤠
Interesting theory. How did ancient folks create these plasma charges? Do you have modern examples of this process?
Great idea. Is it possible they used lightning or was the earth experiencing some plasma event or technology used do you think. Would this be possible using concrete if you charged the rebar.
Thank you for your works in bringing these to light. And let not anyone turn on you. We have had enough of numb knowledge for long enough
We should try to extract the hexagonal rod found in the Queen's chamber and analyze it as a first step in proving your theory. Good observations so far!!
The rod is a measuring stick used by an explorer. Can't remember his name but there are two he used that broke. A quick google should provide a name.
I am glad to see someone working on these problems.
Thanks for your work.
Plasma is not your friend. Stay safe.
Dude this theory leaves a lot pf questions, but gives a lot of answers… very interesting, thanks for your efforts! Keep going!
In the Old Testament, the Ark of the Covenant was carried by wooden poles and anyone who touched the Ark would instantly die.
Sparky
The wooden poles were overlaid with gold, so the were able to conduct any kind of electricity that might have been there.
Absolutely the best theory I've seen in a long long time very good don't stop.....I'm spreading the word the best I can.
The structure of granite can is deformed by heat cycles. If these rocks were heated as you say, they should be able to analyze pieces and verify that.
Nice video really good theories, but I haven’t seen you actually prove anything except for you can create a very bright light
so how much power is needed to melt a big stone block? Also please contrast your theory with the "inca paste" acidic chemical gel theory?
I am in the process of doing higher-voltage testing and will be able to relatively estimate these numbers soon (they will no doubt possibly be in the millions to billions) as this is also what a full size SGL (Spark Gap Lingam, see the How It Works video) was designed to handle, just as a spark gap alone - the voltage output induced by a tesla coil using this setup would be even higher. I'm not super-familiar with the Inca paste theory, however paste doesn't leave half-carved monuments in massive rock quarries =) There may have been geo-polymers or other types of mixtures used for some purposes, though I honestly have not found any conclusive evidence of this (except with limestone), at least not shown in the granite / similar blocks and materials quarried and even the rocks 'melted into a large pile' (several of these in India) that were then used or harvested for the main structures and walls...
@@MadPlasmatist www.i2massociates.com/downloads/On_the_reddish_glittery_mud_the_Inca_use.pdf is the best link to the dec 2017 paper by Helmut Tributsch. Since reading it I've been waiting for some kind of product to be available based on the chemistry therein, for DIY granite construction projects, at all lawn and garden stores. Not holding my breath lol.
My jaw is in my lap. Looking forward to more!
I find the content very interesting and hope to watch more when available.
Yesss!!! I had visions of this technology a few years ago and went down a rabbit hole of learning about geopolymers (concrete) that was set with electricity. I didn’t find much on the electricity part of it, but I’m sure it’s how they did it.
Did they use an Egyptian style ankh with a crystal in the middle to harness the “Tesla” energy and focus it to zap the blocks?
Interesting. Times millions of blocks? During thunderstorms only? There is the Baghdad battery but it's only 1.5 volts without much amperage.
Have you considered soaking the granite in water? It considerably lowers the melting point of granite , and also might allow current to flow through better.
I think the closest anyone has come to explaining how these rocks became shaped was the use of naturally occurring acid that would be applied to the surface of the stones which allowed for their surfaces to become plyable and gelatinous. After curing, the surfaces even show signs of vitrification. I think was is more plausible is that they gathered a lot of smaller stones and mixed them with the acid which basically turned them into a flowing geopolymer and allowed the stones to be poured, slowly and shaped with trowels or other tools as the pour was starting to harden on the outside. When you see what looks like molten voids missing from these stones, that's where a bit too much acid may have been used and resulted in part of the polymer to sluff off the stone. The nobs are likely the result of pouring the stones into a form of some kind and the two holes, one is to allow for air to leave the form as rock pours in and the other is where they are pouring the stones into the form. When the holes are located near the top of bottom of each stone, that's where the course below was poured into and stopped short of filling the form entirely and leaving two ram shaped horns from the bottom course to then be overflowed from the next stone being poured above it. In this way, those knobs would serve not only as a funnel to fill the form, but also as a link of a chain providing the resulting structure with more strength. That, or those knobs are there to simply make the gigantic stones easier to move. Just like placing a pebble beneath a giant block to use it as a pivot point.
That has always been my leading hypothesis as well, but doesn't hold water when you look at the irregular shape of the blocks. If you poured the geopolymer, you would use molds that were uniform.
Interesting, all that is nice, you figured it out. My question is, where is the power plant that would be needed to generate that much electricity, and we’re did the technology come from for all your equipment. There structure are at least 3000+ yrs old
"my incredible contributions" is an apt quote, but it is an intriguing puzzle for the ages, and this is a fair theory steeped in fundamental science that is worth a lot more work to constitute proof.
I am also the inventor of the WCSG (Water cooled spark gap), discoverer of the SGL (spark gap lingam) and not only am I now recreating ancient stone melding technology for the betterment of mankind, I have also created 2 new science experiments using this new, higher-amperage WCSG technology =) Explore the rest of my channel, my website, my past Kickstarter projects... There's a lot more to come - thank you and enjoy =)
You need to modulate the frequency of your voltage to match that of the stone you are trying to "meld". I suggest starting with a low amplitude voltage first until you find the resonant frequency of the stone then ramp it up until it starts to deform. A phase locked loop on the feedback current on the probes will allow you to dial it right in.
The electric side is also a carrier...
So what happens if you inject a frequency or 2, then manipulate them to harmonics of the target material's resonance?
So where are the GENERATORS ? Or at least parts of them.... ? Must have been HUGE !!
They must have flown away with the aliens who taught ancient people how to make magical disappearing electrodes that have never been found, nor even represented in ancient art or writings.
Hey plasmatist, there's a ton of issues with your idea. That being said, I applaud your awareness of ancient stonework. I implore you to try anything to recreate it.
If you do recreate it. How are you certain is it precisely how or what they did. 2 methods 1 result.
Do you care about how they did it? Or just recreating it with modern technology they may have never had.
Love to discuss ideas with you.
Thing is, I take everything I know they must have known into account before I assume they know magic and aliens.
So all of my methods may be way simpler methods. All untested. All highly likely. All my methods are plausible.
I like how you declare there is no room for plausibility. Haha. I am the god of time, mastery over chronology.
Ahhh they knew things. I decrypt their decayed brains and read their burned books. Interesting it is, 🌐 worldwide. Interesting it is all metal gone. Interesting holes, you know I know of many UA-cam channels who study these rocks and structures and artifacts.
Ancients think we are retarded for not understanding what is obvious method to them.
They knew magma / lava was rock. They knew rock could be melted. There are vitrified remains in places. They utilized more than 1 technique for these 'projects'
The entire thing reeks of automation. Scaling. These polygonal are difficult to explain. Artifacts even moreso. Your technology can't recreate ALL of it. Possibly some though. Had they a crazy power source.
Thing is too. You are implying these were constructed prior to a cataclysm otherwise you admit you have to be wrong. Chronology...101
I smoke it. They know water cuts rock. Doesn't explain everything though. Can you find a method using compiled ancient knowledge or must you resort to technology of the day to explain such masterpieces.
Ahhh tube drills. They speak. Saw marks. Doesn't explain polygonal or nubs. Fucking nubs!!! Yes. Why not just smooth it out? They can cut it flat obviously everywhere else. They did it to fuck with you 10000 years in the future. They said haha nobody will ever figure out how we made this........they're right. We haven't. Too many stones. Too big. Too perfect. You can't cut perfect corners like in the serpium of Sakara.
They are unbelievably smart.
The polygonal or hexagonal holes are easy to explain. Drill a round hole, insert a slightly smaller hexagonal electrode. As the rock heats up and becomes pliable it "melts" around the electrode, then later solidifies. Remove the electrode and voila! A deep hexagonal hole, which leaves everyone to wonder: "How did they drill that?"
Great theory. Plasma is likely part of it and I suspect EVOs as well. Some other questions in addition to add:
1. What about the stones without electrode holes? Did these holes collapse when the electrode was removed?
2. If so, why are some holes still open while others are closed?
I suspect multiple processes were used at various times through the thousands upon thousands of years of antiquity, with multiple intended uses over time, the knowledge of which may have been wiped out by multiple cataclysms with the meaning buried in alchemy and multiple subtle meanings in Egyptian hieroglyphs. Looking forward to your continuing studies.
There are plugs that haven't eroded / are newer constructions (the holes and nubs were never meant to be seen - if you can find the video of Praveen Mohan where he shows square, sealed, I think pointed cylinders - this is a good example of this plug technology and also, every lingam base is made this way, the holes are there; look at eroded and broken ones... Keep in mind, just as these great civilizations were all built with the same stone methods, they were also controlled and destroyed like toys... As we are today...
@@MadPlasmatist thanks. I’ll search around for Praveen’s work. Do you think that the huge nubs on the megaliths in China at Yangshan Quarry were also originally hidden by casing/veneer? Any evidence or research along these lines that you’ve come across? Also any thoughts on how your plasma research might mesh with EVOs?
@@Blackboxinquisitive No, the quarry was just left raw though there was machinery (placed on the shelf looking areas) which may have required these protrusions as actual features (though once again, only for temporarily removing the stone) - and EVO's - in one of the first videos on the new science of "Electro-tesla-mechanics" (I also discovered and named) I ask what if a tesla coil could fly... =) That is all I think I can even nearly say, it is up to you and the world perhaps now...
@@MadPlasmatist interesting. Any research/evidence backing up your theories on the quarry? There’s certainly some interesting aluminum OOPARTS that might explain the regular markings in the quarry and in the Longyou caves.
@@Blackboxinquisitive I may not have understood what you meant by EVO, I thought it was another slang for UFO, UAP etc etc - a part 2 will be in the works someday that should explain (and demonstrate I sincerely hope) all of these questions plus more... It will take about 2 grand in coil wire and equipment - at the time-being I can barely eat each day so...
How close would the rock have to be to its final shape to achieve the results we see in amcient structures? I believe there is more going on with ancient megalithic structures than can be explained with scientific reasoning.
There are 2 possible explanations - very to moderately close or, at these incredibly high voltages and / or application methods; it might be possible to create a 'cell' affect in which the stones are pulled / held in a geometric, naturally cell-shaped pattern by the electricity. I have seen what appears to be both, however the first example in which they are moderately cut close then 'puff out' like a marshmellow under heat from their own weight (also explaining their straight planes / not lumpy on the sides like just rough stones stacked) would seem to be the predominate method.
How do you get close enough to molten stone without being cooked ? How many stones were in a molten state at one time ?
What did the ancient people use to generate a power source? I would love to see your theory in action with actual sized blocks of stone.
There are many possibilities, the atmosphere for one, before cataclysms, had a much higher charge (said to look like the aurora borealis) and if you'll notice there are always metal spikes at the top of all ancient structures, which they could have used to simply 'pull' charge from the sky; another is simple charge differentials, where if you place one wire high up (using balloons?) like even on a mountain top, you will have quite a substantial charge differential - if you look at my 'future of power' video, you can see how this can be harnessed to perform physical work (or generate elec with a generator) =) Hope these few examples help!
Awsome stuff!! Just stumbled on you page omg Awsome
Many years ago I saw a clip on vhs I can remember the gentleman’s name but he was doing similar with rocks and hi voltage and the slightly levitate and the structure of the rock totally changed....
Many year on I find your work and it’s amazing....
Have you ever noticed Hindu god Shiva holds a tri tip trident 🔱 very similar to the one in your clips 🤔
Super interesting
I know it’s expensive..
However I wound how you exact set up would work with gold as rods and conductors.
Thank you for your efforts
You will need a bunch of money to make a working model of all of this. Start selling t-shirts on each video with print on demand, monetize your videos AND ask for donations or start a patreon site for members only? I'd LOVE to see you build this to scale and make it work!!!!!!!!!!! One mistake: a famous explorer left the pole inside the pyramid. He mentions it in his journals. Might want to check it out yourself. It's been a minute since I saw that so, fact check me as well. LOL. I really want you to do this to scale. Ever thought about trying to get sponsors on those start up capitol sites or something??? What about that famous singer who searches for aliens and stuff? Maybe he would sponsor? Heck, find anyone willing to do it. What about the history channel?
The pieces are comming out front. Nice. I kept thinking heat...the electrodes were shaped like tuning forks. More clues are in the area of the dendora lights. The wiring diagram is on the wall.
Someone with the knowledge shared with the Dogons...shared it civilization at the time. What was no mention of sudden delush that destroyed the technology.
The sun, planet and water (electricity)
Great job!
The carving of caves of ancient time look like forks going top to bottom on a block of butter.
Well done!!