I think I've discovered something to do with my retired free time. I haven't built any balsa wood model airplanes since I was about 12 years old. (I just turned 70, lol.) Thanks for sharing this, it's quite detailed.
My father would have loved to see this. He flew DC3'with the RAF during WW2 in the VIP section of Transport Command and he loved building scale model aircraft.
Wow this takes me back to my modelling days and the smell of dope and white glue loved it I wish I had kept my old Futaba radio and my 4 strock diesel engine thanks for the memories loved watching it
Did a Guillows Cessna 150 like this some 4 years ago. Covered it in Ultra-Coat transparent neon yellow and neon red. Awesome little plane full RC. Gotta love the mods to make it happen.
I used to build with balsa,the only thing around in those days,and remember my first plane ,a thunderbolt,this build brought back memories.Thanks for the video.
Thanks. I love the DC-3 or C-47. Perhaps the first modern airplane in terms of reliability and endurance, and grand-father to all modern airplanes. :-)
Its so cool to see someone make one exact like mine exept i bought my balsa and cut it by hand and wrapped it with see through plastic to see the inside but toher than that its amazing
Never put pins through longerons spars etc,surround the pins around the pieces always and use a little thought in where to put pins in,needles are less destructive to the parts, Perhaps try white wood glueing the holes afterwards if one must puncture the wood? Nicely made your model well done.I found some gentleman had brought up all the remaing Kiel Kraft kits and tools in Cornwell some years ago . Minniemower Glider and Chieften are wonderfull freeflight kits and today easily converted to RC. Be Blessed and thanks for the video showing.
I love balsa builds. I built 2 or 3 and enjoyed building them more then flying them. Back then there were only gas powered ones, may try an electric one at some point. Even thought about building one and not covering it and just us a model
I’m scratch building a P-47D / 25-30 RA bubble top Thunder Bolt. With 30” wing span five channel set up electric set up. Still not sure how to figure out what size electric motor to use? I’ve been building air planes out of balsa since the 1960’s. I love free flight models the best. Rubber band powered or CO-2 powered but now with this amazing electric motor set up I have to give them a try.
Love this build. Do you have any details on how you connected the undercarriage servos to the actual gear? could not catch it in the speedy video. Thanks
Thank you, I have a longer video I am working on but I haven't uploaded it yet because I wanted to add clips of it flying into it. I haven't flown it yet. The longer video has a lot more detail on how I built the retracts.
am very impressed with the way you build the DC-3, what kind of mavegation and ground lights and beecons you use and also how you run the landing gear system. and finally, what material do you use to cover the plane. . . .MONOKOTE ??? You have thought about building a DC-6 too.
Haven't started mine yet. Pat Tritle design. Impressed with retracts, and built up nose bowl. Has it flown ? Is there a normal build thread on RCG? Mine will be in Flagship Detroit livery from Callie Graphics.
Thank you, I have not flown it yet I am having a problem with the number one engine not spooling up corectly. Thank you for the comment about the retracts and the nose bowl I didn't like the plastic nose it came with it didn't taper down correctly on the front. Good luck on your build
It would be great if you could slow down the video or do a retro-build thread on RC Groups, Scale Kit and Scratch Built forum . I would really like to see detail on your landing gear solution. You will also get advice on twin motor setup. Motors and speed controls must match, etc.
I was taught not to put the modelling pins through any load bearing structures such as spars and fuselage longerons, but rather one on each side of the part, so as not to weaken it by basically putting a hole through it. Is this now an old-fashioned view?
His model building skills are miraculous; especially when there are ZERO sloppy glue joints.
Lol sloppy glue joints are the only thing I can make
NICE! Almost full build. Its very nice to still see men building instead of buying ready to fly models!
A very nice aircraft kit. Lots of work in it. Just don't crash it. Well done
Wow!!! SKILLS + PATIENCE + LUV + FAITH!!!
RESPECT!!! IMPRESSIVE BUILD!!!
I think I've discovered something to do with my retired free time. I haven't built any balsa wood model airplanes since I was about 12 years old. (I just turned 70, lol.) Thanks for sharing this, it's quite detailed.
I just started again at 58...enjoyable
Just getting to the end of the piper j3 my 1st plane into retirement hoping to do a b17 if the piper flys ok
Started building them when I was 11. I’m 13 noe
My father would have loved to see this. He flew DC3'with the RAF during WW2 in the VIP section of Transport Command and he loved building scale model aircraft.
Wow this takes me back to my modelling days and the smell of dope and white glue loved it I wish I had kept my old Futaba radio and my 4 strock diesel engine thanks for the memories loved watching it
Apparently Full Build = 80% complete now
with thumbnails covering the entire part we would like to see at the end. lol.
@A ship with Internet access I :v what is the fun in see the work and not the fucking final result
@A ship with Internet access Anybody who notices it cares
yeh the problem here is that WE DON'T get to see this beautiful model
@Hyper Ghidorah he was chill, you are being a dickhead you hypocrite
Did a Guillows Cessna 150 like this some 4 years ago. Covered it in Ultra-Coat transparent neon yellow and neon red.
Awesome little plane full RC.
Gotta love the mods to make it happen.
Oh how nice to see a built up plane. It brings back many good memories. You my friend are a true modeler.
THANKYOU FOR NOT USING MUSIC!!!
Shouting to get your point across, i get it. BUT YOU CAN ALWAYS MUTE, IF THERE IS MUSIC!!!!!!
you have a volume knob lol. wtf
I used to build with balsa,the only thing around in those days,and remember my first plane ,a thunderbolt,this build brought back memories.Thanks for the video.
Nice, I did a Thunderbolt too.
Always admire these talented people with a tinge of envy
So good 😊 👍🏻
Very nice build,bring back real model building just like this.
Thanks. I love the DC-3 or C-47. Perhaps the first modern airplane in terms of reliability and endurance, and grand-father to all modern airplanes. :-)
Beautiful build I caught a few trick s of the trade when building a model. Thank you.😊
I mentioned building my p-40 kit to my brother yesterday and youtube recommends this today. Beautiful bird ya made!!
They are always Listening! Vote Trump 🇺🇸🇺🇸🇺🇸🇺🇸💪🏻💪💪🏿
@@jjmurff but Killary's new slogan is awesome!
"She got to Epstien, she'll get to you!" Lmao
@@jjmurff one of the great failures of modern America
I miss the old rc plane woodworking classes I took when I was a little boy :(
Yes
would love to take classes like that, guess i was born in the wrong year : /
I love balsa building and your doing a great job.
Nice build, every detail on your plane so cool..
Wow,how those sweet retracts,Nice job!
Its so cool to see someone make one exact like mine exept i bought my balsa and cut it by hand and wrapped it with see through plastic to see the inside but toher than that its amazing
Nice and I rmember it well every kid on the block did that. Only we did not have the neat servos, glue, or Mylar. Only tissue paper and dope.
That was pretty cool! U should design your own plane. Something futuristic! That would be soooo cool!
AMAZING WORK!!
What a b3autiful project. Love the retractable landing gear.
Very nice 👍 💪
Superb job!
Beautiful work.
Come on !!! It's beautiful when do we see the finished product. DC 3,and or Iliushyns are still flying in Venezuela.
Wow 60”, impressive.
Dude, it's beautiful! Well done.
これは重たそうだなWW
スケールの愉しさ満喫してますね
gorgeous plane! Congratulations for the wonderful work!
Nice build
That silver monocoat has me thinking about Zeppelin models
What a great job. Impressive model skills.
Hello from Russia! This cool! Respect!
Never put pins through longerons spars etc,surround the pins around the pieces always and use a little thought in where to put pins in,needles are less destructive to the parts, Perhaps try white wood glueing the holes afterwards if one must puncture the wood? Nicely made your model well done.I found some gentleman had brought up all the remaing Kiel Kraft kits and tools in Cornwell some years ago . Minniemower Glider and Chieften are wonderfull freeflight kits and today easily converted to RC. Be Blessed and thanks for the video showing.
Years ago that all that I built.loved balsa wood kits
Wow lts so cool 🙄🙄😁
Love it nice retracts
Nice job Troy
Excellent spectacular.
Saludos desde Buenos Aires Argentina.
👍😎
I love balsa builds. I built 2 or 3 and enjoyed building them more then flying them. Back then there were only gas powered ones, may try an electric one at some point. Even thought about building one and not covering it and just us a model
You are very skilled. Amazing work
Awesome build and it's a favorite airplane of mine too!
Awesome 👍❤
cool video
Nice work
Bellisimo. U r a master fren. Congrts
Wish I could build that fast. I'd probably glue my fingers together.
great work
Wow Amazing your Like a Monster Dude
Nice 💯🙏🗡️👌🗡️🙏💯💯🗡️🙏
I have a tip for you , you can stick pins into a piece of thick foam so that it's easier to pick them up
Damn thats good. Thanks for the tip
@@Harry_Ballzonya no problem, space out pins at least a finger apart so its easier to take them out
Almost a shame to cover her, looked brilliant. 👍🏻
Woww...🤩
Fantastic build!
Its soo fascinating dude. Your art is incredible
I’m scratch building a P-47D / 25-30 RA bubble top Thunder Bolt. With 30” wing span five channel set up electric set up. Still not sure how to figure out what size electric motor to use? I’ve been building air planes out of balsa since the 1960’s. I love free flight models the best. Rubber band powered or CO-2 powered but now with this amazing electric motor set up I have to give them a try.
For that plane a brushless 480 or power10 (Eflite, or other comparable motor with an 12x4 or 11x5.5 propeller would work with a 30 or 40amp ESC.
That is so good
See...this guy is using his hands, he's building things. He's not like most young folk who do nothing but text. He's a credit to his generation.
I did 3 Guillow's conversions to RC, I crashed each one on the maiden.
maxsmodels why did you require a crane ,are you a heavy builder ? Or if you’re such a crap flyer did you mean you crashed them ? Knob
P0p0544
@@tonywright8294 It is a secret code word, hoser 😁😂🤣. Yeah, I meant crashed. oops.
Wow amazing job
I could use this guy on my team, he knows how to follow directions.
Excelente trabajo!!!!
Amazing! It looks really good.
Love this build. Do you have any details on how you connected the undercarriage servos to the actual gear? could not catch it in the speedy video. Thanks
nice to make with 3D print easy and fast
Neat retracts. Would like to see some more on how you constructed them
Thank you,
I have a longer video I am working on but I haven't uploaded it yet because I wanted to add clips of it flying into it. I haven't flown it yet. The longer video has a lot more detail on how I built the retracts.
Very cool
NICE WORK...!!........i'm wondering if it's better those electric prop motors instead the piston ones....
I personally don't like planes built from Balsa or wood in general, but still this is very impressive 👍
amazing, I love the framing work....
am very impressed with the way you build the DC-3, what kind of mavegation and ground lights and beecons you use and also how you run the landing gear system. and finally, what material do you use to cover the plane. . . .MONOKOTE ??? You have thought about building a DC-6 too.
Inspiring! Thanks!
Beautiful. Enough said.
AWESOME !!!!!!!!!!!!!!!!!
How genious u r!
Take my salute..♥️💙
He's very fast!
WOW WOW WOW !!!
THE REAL PLANE MAKER
That was insane to watch.
Haven't started mine yet. Pat Tritle design. Impressed with retracts, and built up nose bowl. Has it flown ? Is there a normal build thread on RCG? Mine will be in Flagship Detroit livery from Callie Graphics.
Thank you, I have not flown it yet I am having a problem with the number one engine not spooling up corectly. Thank you for the comment about the retracts and the nose bowl I didn't like the plastic nose it came with it didn't taper down correctly on the front. Good luck on your build
It would be great if you could slow down the video or do a retro-build thread on RC Groups, Scale Kit and Scratch Built forum . I would really like to see detail on your landing gear solution. You will also get advice on twin motor setup. Motors and speed controls must match, etc.
in recommended after 2 years
That is really cool! 😃
cool. 👍🇺🇸
👏👏👏👍👍👍
Amazing
Incredible
I was taught not to put the modelling pins through any load bearing structures such as spars and fuselage longerons, but rather one on each side of the part, so as not to weaken it by basically putting a hole through it. Is this now an old-fashioned view?
Amazing. It's good video
Why stop before showing the 'fully built' DC 3? Did you drop it.., or just us?
I watched it fly today
Amazing!
Perfect .
Very nice model. Can you share with us what brand of kit was the basis for your model?
Can someone explain the microwave trick? Do you soak the wood strip for a certain amount of time and how long do you cook it?
Many years ago I built a Stirling Models "Cirrus" glider (similar construction ) with a 102" wing span. It flew well.
I built the very same model. Nice airplane. :)
Noice build, how many hours mate