I sure appreciate Pete’s choice of words while making these videos. He is very careful to chisel nothing into stone unless it’s absolutely necessary. Hopefully I’m growing with this line of wisdom myself. I have a small home based shop. I often encourage people I’m doing work for to take a look at this channel. I do not mean to come across as a confirming source rather that I use these works as confirmation to my processes. Thank you for allowing others this opportunity.
As a drummer who loves progressive metal/metal/heavy I compliment you or whoever put together the music the show and the themes.... RIGHT FUKN ON! Polish up them turds 😂❤
Great videos, look forward to each one. With the deck being out .005" from the valley out now being corrected is the O-ring depth now have .005" difference from valley side to outside of block and will you even it out?
Brother , I am working on my first swap. Ls3/6L80 03' Crown Vic Police Interceptor. I was going to bring my block to you to get worked over till I seen you were like 3 hours from me. I am in Fayetteville, Nc. It needed 1 sleeve and bored. If the block wasn't so cheap I would be building a 6.0 lol
5:05 might be an illusion or something but I have to ask... does your stair want to go somewhere? that ummm what is it? 2x 16 or 18 plate on posts is umm.. lose or..? me working on construction makes me look here and there, can't help it
@assaultlick2169 it's pretty much an abrasive wheel off of a surface grinder made into a tip that's silver soldered to a hss insert body. They are extremely expensive though due to the multiple steps of making them
You should start selling your music. Heck there’s a channel I watch that these goof balls fix small engine and they wear the hill billy teeth and make music and they sell cds and stuff. Your music is pretty cool, I bet you’d sell more than you think.
You guys do good work. Mind you that you title is not synonomous with respect for anyone who doesn't have 100k to spend on their ride. I almost didn't start watching, and that would have been a shame.
“this song is absurd… But I sing every word-ord-ord”
His songs are catchy AF😂
@@nataliedeyton6829 I get these songs of Pete’s stuck in my head!
@@nataliedeyton6829I hunt for a buck
So catchy it's like an earwig
Excellent choice! You will get nice Ra numbers and great for MLS head gaskets.
I sure appreciate Pete’s choice of words while making these videos.
He is very careful to chisel nothing into stone unless it’s absolutely necessary. Hopefully I’m growing with this line of wisdom myself.
I have a small home based shop. I often encourage people I’m doing work for to take a look at this channel.
I do not mean to come across as a confirming source rather that I use these works as confirmation to my processes.
Thank you for allowing others this opportunity.
The music is awesome. I look forward to it every time I click your video
These Damn songs get stuck in my cranium
This video probably created some deck envy amongst the other machine shops 😮 😉
I really love this series
So satisfying.
Great information, thank you.
I'm here for Pete's music. Literally! oh and because I like cars and racecars.
As a drummer who loves progressive metal/metal/heavy I compliment you or whoever put together the music the show and the themes.... RIGHT FUKN ON! Polish up them turds 😂❤
Pete you rock literally! Love the polishing turds series. Peace
This song plays in my head while I’m at work in steel mill maintenance.😂 The things I have to do to make junk last longer🤦♂️
Polishing turds might be my favourite part of your channel.
I've used the stick a drill bit inside on the drive side and grab with curved jaw vice grips heat as needed
Doing the lords work.
Love every episode man, knowledgeable and entertaining!
I thought that music was you. Badass🤘
Next tee shirt cutting with space crystals man
Always a good watch and learn something every time
Very luxurious
We need a album 🥳🥳🥳
yessss
space crystals? that's amazing!
I've been a fan of Luxurious Decks since the 80s. Shout out #LD
Super cool episode.
The fastest 10-15 minutes of my life!! Love the content, looking forward to the next one!
That dowel remover looks like a blood blister waiting to happen.
I instinctively stuck the web of my hand in my mouth OWW OWW OWW 😂
ALWAYS INTERESTING PETE!...GREAT STUFF!
Your TV show is just right & luxurios to boot
Great videos, look forward to each one. With the deck being out .005" from the valley out now being corrected is the O-ring depth now have .005" difference from valley side to outside of block and will you even it out?
Brother , I am working on my first swap. Ls3/6L80 03' Crown Vic Police Interceptor. I was going to bring my block to you to get worked over till I seen you were like 3 hours from me. I am in Fayetteville, Nc. It needed 1 sleeve and bored. If the block wasn't so cheap I would be building a 6.0 lol
I like that ute alot
I'm here for the comments
Y'all killin' it
Nice work brother!
Great content thanks for sharing
Your music reminds me of warrior soul. Great vid set.
Thumbs up for song alone
I could watch more of this 👍
Love the content
"space crystals" 😂
Do you check for square off the bore as well?
Aside from purchasing merch are there other ways to support you? Do you sell engine parts etc?
Tools make the professional.
Good stuff👍
Who sings the song? It's awsome ROCK. I love how you do it with math and old school!!!
Does the deck surface finish have to be different for style of head gaskets? Thanks
I literally tried to find this song on Itunes.
👍👍👍🤘🤘🤘👏👏👏
Dang, Pete sure is good at doing a whole bunch of stuff. Wonder if there's anyhing he's into he aint good at
When do we get to see you helping reaper
5:05 might be an illusion or something but I have to ask... does your stair want to go somewhere? that ummm what is it? 2x 16 or 18 plate on posts is umm.. lose or..? me working on construction makes me look here and there, can't help it
Cubic boron nitride
Was wondering what those magic space crystals were. Thanks, man
@assaultlick2169 it's pretty much an abrasive wheel off of a surface grinder made into a tip that's silver soldered to a hss insert body. They are extremely expensive though due to the multiple steps of making them
Ok I seen dat dare speaker ma bob. So what music comes out of dat dare thingy????????
Any ford content coming up?
Metallica needs to watch the fuck out
You should start selling your music. Heck there’s a channel I watch that these goof balls fix small engine and they wear the hill billy teeth and make music and they sell cds and stuff. Your music is pretty cool, I bet you’d sell more than you think.
i used to watch that idiot tarryl fixes all until he spoke in favor of antifa and blm riots. he should be removed from america.
❤👍😁🇱🇷🤘 yes sir
Love the vid but the music is to loud up down up down
tools make a big difference especially these days. if i didn't have a Milwaukee battery ratchet eg. id retire from mechanics altogether
CBN ?! That seems kinda excessive.
You guys do good work. Mind you that you title is not synonomous with respect for anyone who doesn't have 100k to spend on their ride. I almost didn't start watching, and that would have been a shame.
Wut?
What a strangely unique compliment 🤔