AutoCAD House Design (3D)- Part 4- AutoCAD 3D Door Design and placement (2021)

This tutorial is all about creating a complete 3D house in AutoCAD in easiest of steps. This video in particular is about creating 3D doors and placement of doors.
AutoCAD 3D House tutorial 2018- Part 1- Creating the 2D plan:
• [ COMPLETE ] APARTMENT...
AutoCAD 3D House tutorial 2018- Part 2- 2D to 3D conversion:
• AutoCAD House Design (...
AutoCAD 3D House tutorial 2018- Part 3- Staircase design:
• AutoCAD House Design (...
To subscribe:
/ @caddmaniac
#civil #3dhouse #autocad #caddmaniac #construction #civilengineering #engineering #engenhariacivil #engineer #architecture #civilengineer #design #building #civilconstruction #civilengineers #3Dhome
................................................................................................................
Leaf by KV / kvmusicprod Creative Commons - Attribution 4.0 International - CC BY 4.0 www.creativecommons.org/licenses/by/4.0/ Music promoted by Audio Library • Leaf - KV (No Copyrigh...

[@ShahAlam-kf5mx]

This tutorial is very helpfull for expert.But we need this tutorial for beginners.You worked very fast on this tutorial. Please make this video slowly.Thanks Dear.

[@CADDMANIAC]

Sure

[@emmanuelikechi]

Thanks I'm done with the house and I feel accomplished. You really know what your'e doing, keep up the good work.

[@CADDMANIAC]

Congratulations 🎉
Try the other projects as well

[@zobkpk]

Please make more tutorial. They are really helpful. Thanks

[@CADDMANIAC]

Thanks
I'll try to upload tutorials more frequently

[@GourabChDas]

Fantastic work.. appritiated...

[@CADDMANIAC]

Thanks

[@souravmahapatra525]

this is amazing .. thank you so so much

[@CADDMANIAC]

You're welcome my dear 😊

[@zareenremendies]

Thank you so much, SIR

[@CADDMANIAC]

You're welcome 😊

[@CADDMANIAC]

If interested in learning 𝗔𝘂𝘁𝗼𝗖𝗔𝗗 𝗦𝘂𝗯𝗺𝗶𝘀𝘀𝗶𝗼𝗻 𝗦𝗵𝗲𝗲𝘁 𝗚𝗲𝗻𝗲𝗿𝗮𝘁𝗶𝗼𝗻 course, Install 𝗖𝗔𝗗𝗗 𝗠𝗮𝗻𝗶𝗮𝗰 app from Google Play Store.
• 𝗗𝗲𝗺𝗼 𝘃𝗶𝗱𝗲𝗼𝘀 available
• 𝟮 𝗠𝘂𝗻𝗶𝗰𝗶𝗽𝗮𝗹𝗶𝘁𝘆 approved 𝗗𝗪𝗚 𝗳𝗶𝗹𝗲𝘀 will be provided
• 𝗔𝗽𝗽 𝗟𝗶𝗻𝗸- edushield.page.link/QVgK
• 𝗪𝗲𝗯 𝗟𝗶𝗻𝗸- pyucm.courses.store

[@animeshnandi2639]

Really helpful..

[@CADDMANIAC]

Thanks

[@yashmaanav]

I subscribed you just because you did spoil time to start tutorial ❤️

[@CADDMANIAC]

thanks

[@avinashsahani475]

verry very thanks

[@CADDMANIAC]

You're welcome

[@dhivyaachandran1284]

Super sir very useful..

[@CADDMANIAC]

Thanks ..

[@anubhutiagrawal7016]

In starting of this tutorial you have taken polyline to make that profile please specify the length and width of that

[@CADDMANIAC]

Always mention the time plz

[@gurdeepsandhu9664]

Hello sir, thanks for your videos, sir yeh puri series ka kaam Revit m jayada easy se hota hai to Autocad hi kyon use kiya aapne or log bhi karte hain???? Logic kya hai

[@CADDMANIAC]

Drawing AutoCAD se suru karna better rehta hai, bahut sare functions, drawing techniques sikhne ko milta hai, uske baad REVIT to hai hi; aur ye tutorial AutoCAD me kaam Karne walo k liye hai, REVIT k liye mai dusra series bana dunga

[@gurdeepsandhu9664]

@@CADDMANIAC Ok, thanks.

[@ankitrai8392]

Please make a vedio on basic settings before start a drawing

[@CADDMANIAC]

Watch the complete series, I hope you will be able to do everything

[@palleturuandalu4674]

Sir, this is very helpful tutorial but small request please give tutorial little bit slow Sir thank you

[@CADDMANIAC]

Current tutorials are slow, plz check playlist

[@mallikaagrawal4891]

In my cordnates option is not showing then how to turn on the ucs to change to front

[@CADDMANIAC]

Type "ucs", press enter, then click on front in the command line

[@anubhutiagrawal7016]

How you have select 3points in mirror the door

[@CADDMANIAC]

Mention time in the video
For 3d mirroring you have to create an imaginary plane by clicking at 3 points in the same plane

[@chrstnmmnl]

Thank you Bro I Appreciate it

[@CADDMANIAC]

Most welcome ..

[@mohammadzaid4777]

I am not getting to move Door's Frame On Door

[@CADDMANIAC]

Try moving from one snap to another, make sure the object snaps are on, press f3 & f4 to turn the 2d & 3d object snaps on

[@hashimkhan613]

ap k lecture bht hi helpful he lekn apni speeeed thri C slow rakhein, jo likhty hain wo samjh nhi aati.

[@CADDMANIAC]

Thanks bhai 😊
Ye thore purane videos hai, maine khud vi realise kiya ye bahut fast hai, aap recent videos check kijiye wo normal speed me hai

[@Allinone-hf5uu]

Pls upload one video on 3d elevation

[@CADDMANIAC]

Are u talking about the front elevation?

[@Allinone-hf5uu]

@@CADDMANIAC yes

[@ankitrai8392]

Jb pr command x scale me 30/36 kr rhe to door ki length kaise change ho rhaa

[@CADDMANIAC]

Door ki width change hogi, scale factor hai ye 30/36

[@anubhutiagrawal7016]

Please tell the dimension of door design

[@CADDMANIAC]

Watch the tutorial completely, it's all given

[@ganesanyuva7960]

Can you teach something slowly but very useful

[@CADDMANIAC]

These are my primary tutorials, check the latest ones, those are slow

[@ultranomanadil]

4:11 😂

[@CADDMANIAC]

There must be something funny

[@naiemofficial_]

Can't understand what did you do from 2:16 to 2:20

[@CADDMANIAC]

Moved the 2d profile over the front face of the door, make sure you turn f3 & f4 on before moving

[@naiemofficial_]

​ @CADD MANIAC when i want to move the door handle it goes to the inside of the door. how can i fix it 5:04 to 5:08

[@CADDMANIAC]

Make sure the Ortho is on while moving, press function key f8 to turn it on

[@lakshmiravi8966]

I am now only step on cadd 😔

[@CADDMANIAC]

Don't worry, go to playlist section, watch the Beginner's Tutorial series, I hope you will learn quickly

[@ujwala5114]

Video jara slowly record Karo sir fast fast samaj nahi aata

[@CADDMANIAC]

Latest series check karo

[@karamchand8826]

For more view translate in hindi

[@CADDMANIAC]

Thanks for your valuable suggestions

[@humphreyserrano6089]

bilis mo magsalita pati magturo pta

[@CADDMANIAC]

Watch the latest tutorials, those are slow

[@humphreyserrano6089]

@@CADDMANIAC okay sorry and thank u hehe

[@designer_irfan]

Thank you so much, SIR

[@CADDMANIAC]

You're welcome 😊