Bro I'm using 5200 mah (40c) battery And I'm not using any extra items too but my drone hardly give 17 minute backup.Can I have to do any settings for best backup like reserve mah. Plz tell me fast
What do you mean We can setup the drone using mission planner app I have made a dedicated video ion making and programming the drone see it in my channel
Please tell me the firmware is being used here ! Bez i have uploaded the latest firmware 3.2.1 it has problem in loitor i have good gps but when i trigger the loitor the copter does not stay still ! I want ur firmware version
things that are important for good stability--- 1. Good GPS signal(satelite 13 and hdop below 2.3); 2.low compass interference and use External compass; 3.PID Values are correct as per youor frame and drone weight(To get perfect PID value, do Autotune on no windy day ).
Two are same but the original one is not manufacturing since 7 years ago. So, here are the cloned. I will say They both are BAD BAD BAD BAD BAD BAD BAD BAD BAD . you know why i rated such. you can feel it also after making. Plenty of problems
Hey bro! Nice vid! Do you tink you could answer me a few questions? I have a bait boat, and I want to be able to read the distance from my boat and remote,so I know how far I send it,and also, I want it to return to the starting point without me to drive it. I know I will need the 1. APM 2.8 (this is what i want to use cuz its cheaper) 2. GPS 3. Mini OSD Questions: Will I need the 3DR Radio Telemetry? If yes, what is this for? Will I need a Power module also? My bait boat is functional, can I connect the AMP to the power source of the boat? Thanks and I hope you can answer me as I am new in his :)
1. Yes you need 3dr telemetary ,if you want to check the distance of boat from you (gps required) 2.if you want ti check you battery voltage through telemetry ,then you need power module 3. Yes you can to power sorce of your boat to apm if your power output is 5v
@@anurag5874 thx man. So my boat runs on a 4s battery 15v. Do I need a 5v battery ? I switched and bought a pixhawk. So in this case, I need to buy a 5v battery?
@@lucianbuhus1150 bro ,which type of esc do you use , if your ESC have BEC then you don't have to buy a 5 v battery ,you can directly power your flight controller through esc signle wire which connects to output channel of your flight controller
Bro which firmware version have u used, bcoz its way too stable ,mine is not working well in althold ,it suddenly rises and flips over ,can u please help me solve the problem
You can set a rtl mode onbtransmitter like stabilized, loiter,... And also it activated automatically for failsafe like low batttery and out of transmitter range
Hello bro I have successfully built the drone But I am having some problems while flying the drone The drone keeeps on spinning (yawing) At first I thought one of the motor was not spinning in the right direction But all the motors are spinning diagonally clockwise and diagonally counterclockwise Then I thought it was the esc calibration problem I calibrated it more than 5 times Then I thought it wouldn’t be the esc calibration problem cause if the ESCs are not calibrated correctly Then the drone will not spin(yaw) it will either pitch up or down or roll left to right Then what is the problem???😔😔😕 Pls help bro pls…….
@@MakeItFlyofficial congratulations bro on your builds.... actully i am also making my first drone just tomorrow.... I know everything abouyt this tech but my first build i suppoedly gonna come successful tomorrow...
Calibrate the accelerometre correctly cheek compass jumper and calibrate it correctly Yet if is not. Then setup it again It's 7 year ago technology so it can be solved by several time setup I have noticed it
First program it correctly and secondly compass calibrations and the most important it to do Autotune.. Autotune helps the aircraft to get automatically get own compatible pid values.
Go outside and wait until it got GPS lock. even it does not work connect it to your PC and try to arm in mission planner you will got the reason for not arming.
that too rude with that cute drone
😮Awesome performance. Iam going to build this drone next week !
Cool 👍
Bro flight controller shi hai ye....???
Good bro. Keep it up. Wish you best of luck form om hobby UA-cam channel
thanks
Are kaisa ho
Awesome bro... Keep it up
Bro I'm using 5200 mah (40c) battery
And I'm not using any extra items too but my drone hardly give 17 minute backup.Can I have to do any settings for best backup like reserve mah.
Plz tell me fast
17 min very good. Or kiya drone ki jan loge bhai.
Very good demo, all the best guys !!
Brother mere drone main loiter,Rtl,position hold...etc mode work nahi kar rahe hai. Please help me.
Have you connected gps if yes then go outside to a open area where GPS signals are good bad try😁😀
Ok brother thanks for reply.☺
Waow kick test best performance
Thanks
your drone is amazing like we never expect such talent in our country but on seeing this it seems like we are also developing in way of technology
How to change max altitude in Apm 2.8
Plz reply me I want help.
Follow the steps
Missionplanner and connect drone,
Configration and tuning,
Then fence,
And there change the max altitude to your desire altitude
Sir mera drone me gps set nahi ho raha he loiter mode me armed nahi ho raha he
Go outside for good signal gain
Excellent work
Can we add a servo and a mini electric cigarette lighter to a basemodel drone?
Best fly with all order....
Loitar mode is to good position ...
Thanks
Super bro
Thanks
Bhai I want to make a budget drone.. for videography.. which flight controller should I purchase? APM 2.8 OR KK 2.1.5.
I will recomend apm 2.8
@@worldofprojects7456 Yes
Bro which battry you will use
2200mAh 3s 35C lipo
Great bro
Bro there is only Programming of speed controller... not a transmitter programming... thats ok
But how can we get the adrupilot file
What do you mean
We can setup the drone using mission planner app
I have made a dedicated video ion making and programming the drone see it in my channel
@@DIYLIFEHACKER you are right
Am asking how you got the file of adrupilot in computer
Bro lioter me height hold nahi horahai...... drone niche araha hai...... isko kaise thik karu ????please bolo
To hover at a patricular height keep throttle at 50%
And pull up to go up and pull down to go down and keep 50% throttle to hover at that height
Can we connect 6s battery to APM 2.8
Made one with a kk2.1.5 , the quad x copter can never take off and now receiver transmitter failures are happening very often
check antenna problem
Did you run autotune to get this kind of stability
Bhout badiya
Hi When return to home has been pressed and the drone has come to you can you cancel return to home and do manual landing?
Sure, change the mode to loiter or other and get it back in manual control
@@DIYLIFEHACKER Thanks.
Please tell me the firmware is being used here ! Bez i have uploaded the latest firmware 3.2.1 it has problem in loitor i have good gps but when i trigger the loitor the copter does not stay still ! I want ur firmware version
Bro in which class you are??
bro need your help my drone is not stable in loiter mode and alt hold mode also bro it crasher many times
Which is more stable pixhawk or APM 2.8?
Bro i need help about stability releated issues
things that are important for good stability---
1. Good GPS signal(satelite 13 and hdop below 2.3);
2.low compass interference and use External compass;
3.PID Values are correct as per youor frame and drone weight(To get perfect PID value, do Autotune on no windy day ).
@@DIYLIFEHACKER in need ur contact so i will directly ask query
@@dockon check the about section in my channel and get contacted
Happy to see kids engaging in some devloping some good skills .keep it up pal! Good work and do more such stuff..
@@jaykumarvora2156 thanks
Bhai drone and plane banane kelia kanse course karna padega please batao
No you need just a phone with a internet.
Google and youtube is enough for learn anything
Bro which remote did u use ??
Bhai ye sabhi parts Kaha se kharide... Which site
How can i build automatic drone landing
Plz help me bro
Which is better arducopter or ardupilot
Two are same but the original one is not manufacturing since 7 years ago.
So, here are the cloned.
I will say They both are BAD BAD BAD BAD BAD BAD BAD BAD BAD
.
you know why i rated such.
you can feel it also after making.
Plenty of problems
Thank you for informing me
Bro can you tell me what is the life time of your used motors and flying time of the drone and the range
Which flight controller is used
APM 2.8
Hey bro! Nice vid! Do you tink you could answer me a few questions?
I have a bait boat, and I want to be able to read the distance from my boat and remote,so I know how far I send it,and also, I want it to return to the starting point without me to drive it.
I know I will need the
1. APM 2.8 (this is what i want to use cuz its cheaper)
2. GPS
3. Mini OSD
Questions:
Will I need the 3DR Radio Telemetry? If yes, what is this for?
Will I need a Power module also?
My bait boat is functional, can I connect the AMP to the power source of the boat?
Thanks and I hope you can answer me as I am new in his :)
what are you making? :)
1. Yes you need 3dr telemetary ,if you want to check the distance of boat from you (gps required)
2.if you want ti check you battery voltage through telemetry ,then you need power module
3. Yes you can to power sorce of your boat to apm if your power output is 5v
@@mysterymanyo a bait boat.
@@anurag5874 thx man.
So my boat runs on a 4s battery 15v.
Do I need a 5v battery ?
I switched and bought a pixhawk.
So in this case, I need to buy a 5v battery?
@@lucianbuhus1150 bro ,which type of esc do you use , if your ESC have BEC then you don't have to buy a 5 v battery ,you can directly power your flight controller through esc signle wire which connects to output channel of your flight controller
plese help i cant get wizad in my mission planer
Thatsbalso my problem
Download old mission planner
One cell of of 3s battery's decharging rate and charging rate is 4x than other two cells . What should I do?
Replace or buy a new one
what's your radio
Bro which firmware version have u used, bcoz its way too stable ,mine is not working well in althold ,it suddenly rises and flips over ,can u please help me solve the problem
1004 Samyak Dharod ikr!
Hello
I installed GPS neo7m in my apm2.8 but I get GPS:no fix what I do to solve that problems
You have to go out door for gaining good GPS signal
In indoor there the gps will not connect to satelite
How to activate RTL BRO
You can set a rtl mode onbtransmitter like stabilized, loiter,...
And also it activated automatically for failsafe like low batttery and out of transmitter range
Camera and gimbal lagake video banao na
OK will try let my channel to be monitized then i will buy from there
Power Module Is Necessary For APM 2.8?
No, it's just for battery monitoring and triggering RTL or Land while battery fail-safe
Hello bro I have successfully built the drone
But I am having some problems while flying the drone
The drone keeeps on spinning (yawing)
At first I thought one of the motor was not spinning in the right direction
But all the motors are spinning diagonally clockwise and diagonally counterclockwise
Then I thought it was the esc calibration problem I calibrated it more than 5 times
Then I thought it wouldn’t be the esc calibration problem cause if the ESCs are not calibrated correctly
Then the drone will not spin(yaw) it will either pitch up or down or roll left to right
Then what is the problem???😔😔😕
Pls help bro pls…….
it might be a problem of yur transmitter bro
@@mellajr3255 thanx but i hv solved my prob and built my 2nd drone too.... XD
@@mellajr3255 yes after i solved the prob there was also a potentiometer jitter in the gimbal of my fs-i6 which caused partial yaw
@@MakeItFlyofficial congratulations bro on your builds.... actully i am also making my first drone just tomorrow.... I know everything abouyt this tech but my first build i suppoedly gonna come successful tomorrow...
@@mellajr3255 All the best for ur build!
u can ask for any helps in ur build also check out my video on making a drone posted in my channel too!
Are Bhai weight test pe video banyona Pura drone Ka test
Someone already made that so am not making
good work
Which one gps is best m8n or 7m
m8n
Hey, i bought the components as per your video, it's not working, can you help me out?
anishdey702025@gmail.com
Transmitter program pls
Search the link:- ua-cam.com/video/KooDGum0n-k/v-deo.html
Or see my video on FS CT6B Flight modes
flight time kitna hai
1000 kv motor. 2200 maybe 35c 3s lilo battery flight time 10 minutes hardly without harming the battery
How to do auto tune using 6 channel receiver
Plug Receiver's channel6 wire to Apm's channel7
Very good
sir mera drone flipping hora hai .
chect motor and propeller directions
What's the flight time of drone
hardly 10 minutes
Bro what's drone weight?
1.3 Kg
I am using APM 2.8 .
Its flip right side when takeoff
I am whatsapp you my video.
Maybe your trims are unbalanced , but is also caused if your drone is not on a stable postion while taking off.
@@nadeem8013 it is on stable position, and can you tell me how to trim it.
@@nadeem8013 no, for it app has sufficient intelligence
I AM NOT USING GPS MODULE is it necessary
Calibrate the accelerometre correctly cheek compass jumper and calibrate it correctly
Yet if is not. Then setup it again
It's 7 year ago technology so it can be solved by several time setup
I have noticed it
Supper
Bro i need your help please replay me
yes sure
Bro it is possible to make ardunio rc car with camera and controlled over 4g network and see the live feed
Yes it is possible
that gonna be in UDR v3
Armed ho raha hai but motor rotate nahi ho raha hai
Apka to mast h bhai👌👌👌
mera drone keval 1 side se lift hora h please help 🙏🙏🙏
program it correctly
range itna hai
Its depends on your transmitter range
I have made a dedicated video on unlimited drone range
Nice video loved it, your links are not working try to fix them.
My transmitter is perfectly not working
I have a best solution for that.
Uploading video on that on 6/3/2020.
See you Soon...........
Hello bhai...what are the other was to connect APM to mission planner without usb cable... because my usb port on APM has damaged
UART
You can also use telemetry
Can you help me make a drone
Link is not working:(
भाई इसकी सारी सेटिंग का एक वीडियो बना दो प्लीज
Bhai Sher Jab Karunga Jab Hamara Drone bhi aise udega
First program it correctly and secondly compass calibrations and the most important it to do Autotune..
Autotune helps the aircraft to get automatically get own compatible pid values.
Flip test
sure i Will try but it's too difficult with 1000kv motor because bullet propeller adapter can brake and the drone will crash
Must londe
Mera drone arm ni ho raha plzz help kro
Change your mode
Go outside and wait until it got GPS lock.
even it does not work connect it to your PC and try to arm in mission planner you will got the reason for not arming.
add altitude sonor
Tell me
Bhai thotral kam nahi horaha hai
Please provide more detail to let me find solution
Bhai mujhe aapke purane drone part chahiye Kyunki mere pass new part k liye jyada paise nhi h agar apple pas extra part h.
Aap mujhe de do
Help me sir
Hii brother can u help me
how?????
प्लीज भाई यह सारी सेटिंग्स मुझे चाहिए प्लीज इसका वीडियो बना दो प्लीज भाई प्लीज
Ok
Please help me my drone is not stable
Do autotune
I need help with my drone, please help me 😭😭😭
yes
aplausos
Cary bakchoi
😂😂😂😂😂
Super bro