thank you, this is the opposite of those looooong videos where you get stuck watching a bunch of nonsense to get maybe 1 useful tip but you forget it because you need a nap afterward
THANK YOU FOR SHARING THAT! I really appreciate your videos, your tips and your hacks (even if I often see them only a couple of days after I could have really used them!)
Highly inspirational! Glad I watched this; will bookmark it. The glueless wedged wood joint reminds me of what old woodworkers used to say when I was a kid. They didn't like nails and it was the era before PVA glue. Their work was finer than this, but I could never quite figure out how they did it and probably still don't have the necessary fine motor control. That wedging looks easy. I think the nearest thing they did was to use dowels which may perhaps be just as easy. Ha! The tool I clicked for is the one thing in the whole video I wouldn't have a use for. :) Phone stand out of zip ties! I just... the one thing I've always needed... and commercial products are never any good... Why didn't I think of this?
Aos quais Deus quis fazer conhecer quais são as riquezas da glória deste mistério entre os gentios, que é Cristo em vós, esperança da glória. COLOSSENSES 1:27 👏
its so funny because I worked as a fishmonger for so long and you can literally just use a knife against the natural direction of the scales and it works just as well haha
Like I mean or what I'm trying to say or ask is... Do you post these when you do just to have me thinking to myself oh well I could have really use that or I wish I'd known that before I had or my would have been a lot better to do it like that or... well you get the idea... And even though your videos are often causing me to smack my head saying "DOUGH! I WISH I'D KNOWN THAT BEFORE" I still really appreciate them none the less!
How could I not have thought of this before? It would have saved me pain and a visit to the doctor. How can you hold small and smaller things in your hand and not clamp them in a vice? Be more careful, safety first!
13/26 OMG don't do that, please... You will destroy your cables like this. 15/26 Concept is good, but the paper clips are visibly not enough to hold. A better clamping mechanism would do the trick. A square would also make more sense rather than a ruler.
It has now occurred to me that you could round out the handle of the knife and put it directly in a drill. No need for all that extra fabrication. Just a spinning knife in a drill! How could I not think of this before? 😆😆
y nosotros SOMOS GEEKS ..... te seguimos donde vallas, somos la familia geeks mas grande de internet !!!!! Tu Nombre es Daniel Virgen y Nosotros , SOMOS GEEKS!!!!
These are just common physics knowledge. Fulcrum and weakest link stuff. Anyone doing construction OUGHT to know these kinds of solutions. How to make something structurally sound, getting things measured and aligned correctly, etc. 1:24 fulcrum. If you just understand that concept, you can do so much w/o even knowing the specifics beforehand. I use it all the time in the kitchen. Opening cans that have the tab. I bend the tab up, stick a pen into the hole and two fingers below the pen, pull BACK towards myself on the pen and it opens with such little force that a 2 year old could do it. But nice vid anyway. People who haven't thought along these lines can make their lives easier. I don't bother with trying to open bags and bottles and kitchen stuff with my hands as much anymore. Easier ways. Rubber mat for opening, exacto knife for all plastic bags and cardboard boxes, etc.
NEW AMAZING VIDEO👉ua-cam.com/video/aog_lq7vkf0/v-deo.html
Thank-you for numbering the tips.
Thanks also like the background sounds.. soo much better than most music choices on others 😃
Thank you for the tips and beautiful nature soundtrack. All the best.
5:29 The first bottlecap thing i was okay🤷🏼♂️? THIS ONE🤣Cracked me Totally up!!🤣🥰
HILARIOUS!!!
Several creative, novel and useful ideas. Thanks for the video.
So many dangerous "hacks" here, and ones that can be done far cheaper and easier by just using the proper tools!
The spaghetti profile gauge is hilarious. If you don't have spaghetti you could also use a profile gauge.
Last time I run out of Spaghetti I used Bucatini. It was tasty as well!
@@DiegoSynth It did not work with macaroni
@@mjverostek1278 😂
I googled "how to be shit at DIY and scrape stuff off dead fish" and this amazing video came up. 👍
thank you, this is the opposite of those looooong videos where you get stuck watching a bunch of nonsense to get maybe 1 useful tip but you forget it because you need a nap afterward
Congratulations on inventing the world's messiest fish scaler.
Some great tips in this video. Liked and subscribed!
i've done one of these before, nice tricks.... good job, ill have to try more!
5:17 what you do with used beer/pop caps- a fish scaler. I like the bird sound in backround.
We all have things that we found on our own.
This video is very good. ! 😊
Good stuff. Thanks
Great tips, enjoyed video.
THANK YOU FOR SHARING THAT!
I really appreciate your videos, your tips and your hacks (even if I often see them only a couple of days after I could have really used them!)
One of the best amazing video, thanks great ideas !
i went through so many emotions while watching this
*The way you make your tools is amazing. I really like the way you do it my friend* 👍👌
Great video both .
Muchas gracias por tu tiempo en subir videos 👍
Really fun & Useful Ideas! Love the fish scaler
No 21 is widely used in Indian flute (Bansuri)
Oh this is the type of content where you mix lies with secrets.
I will use that phone standing support when traveling by train to see the passengers reaction :D
Some of these I have no idea what you are accomplishing but some are very good.
Muy práctico y fácil de hacer!
Wow!! Awesome hacks!!! Thanks for sharing!!👏
this is great, please what is the liquid stuff poured to break the tiles?
Wow-Ingenios!
Especially the noodles to template.
Highly inspirational! Glad I watched this; will bookmark it.
The glueless wedged wood joint reminds me of what old woodworkers used to say when I was a kid. They didn't like nails and it was the era before PVA glue. Their work was finer than this, but I could never quite figure out how they did it and probably still don't have the necessary fine motor control. That wedging looks easy. I think the nearest thing they did was to use dowels which may perhaps be just as easy.
Ha! The tool I clicked for is the one thing in the whole video I wouldn't have a use for. :)
Phone stand out of zip ties! I just... the one thing I've always needed... and commercial products are never any good... Why didn't I think of this?
Примерно за две трети этих гениальностей - мастера набьют лицо.
Береги свой хавальник!
🎃🤗🐷
Точно набьют за длинный поганый язык.
@@user-gz3xt7qh9m береги свой.
You should only use pencils instead of markers when working on wood :D But still a nice Video^^
A good ratio of useful tips VS clickbait.
Thank you.
Best kinks. Thank you.
Really good tips...some of the best compared with other channels of this nature. Good job!
Awesome!!!
Yeah I need a hinge I'm going to have to stop by the Home Depot to get an arc welder and a nut and bolt
vc é top demais parabéns 👍 felicidades salvador Bahia Brasil
Is nobody gonna talk about the thumbnail?
Muy práctico y fácil de hacer🎉 🎉🎉🎉🎉🎉🎉
Aos quais Deus quis fazer conhecer quais são as riquezas da glória deste mistério entre os gentios, que é Cristo em vós, esperança da glória.
COLOSSENSES 1:27 👏
I like the Uri Geller idea with the fork !😁Let's just hope the Amazing James Randi isn't looking down !
Interesting video!
This video is a peice of art🎉.
the brush scaler was perfect the drill bit scaler was OVERKILL surprised ya didnt send chunks of fish meat flyin with it
its so funny because I worked as a fishmonger for so long and you can literally just use a knife against the natural direction of the scales and it works just as well haha
Those birds sounds in the backround are actually coming from his head...
Do that to one of my chisels once and you won 't do it twice!
Like I mean or what I'm trying to say or ask is...
Do you post these when you do just to have me thinking to myself oh well I could have really use that or I wish I'd known that before I had or my would have been a lot better to do it like that or... well you get the idea...
And even though your videos are often causing me to smack my head saying "DOUGH! I WISH I'D KNOWN THAT BEFORE"
I still really appreciate them none the less!
очищать чешую с рыбы лучше, поместив рыбу целиком в ведро с водой - В ЭТОМ СЛУЧАЕ ЧЕШУЯ НЕ РАЗЛЕТАЕТСЯ
must be nice to have a river and a bunch of song birds in your house
How could I not have thought of this before? It would have saved me pain and a visit to the doctor.
How can you hold small and smaller things in your hand and not clamp them in a vice?
Be more careful, safety first!
1:30 --- You're cancelled. 😏🤣
Вилкой провода закручивать😮
А вы знаете, что если у вилки два крайних зуба в стороны развести то за один раз еды больше возьмёшь😂😂😂
Epicccc.. ty
13/26 OMG don't do that, please... You will destroy your cables like this.
15/26 Concept is good, but the paper clips are visibly not enough to hold. A better clamping mechanism would do the trick. A square would also make more sense rather than a ruler.
I came to hear the birds but tips are cool too
Самый последний вариант с селиконом для замазывания углов с применением трубки,👍
The poor fish is bleeding, 🤣🤣🤣
0:14 OH my god that sound was VILE
Essa thumb ficou mt Pika
столько недешевого электрооборудования, а на чистилку рыбной чешуи денег пожалел.
неужели всё ради лайков?
Благодарю ❤
Safety first, OMG. Be careful with placing your hands and fingers so close to things that shred.
The video thumbnail reminds me of something!!!
Good advice for life
Very good
Превосходно! Вы, несомненно, русский!
👍👍👍
You have to earmark enough time to explain your each idea or activity completely.
A fish scraper.....
No.13. 2:22
! DANGER !
the video 😇
the thumb 🤨
Top tip: A knife takes scales off a fish
But what if you do not have a knife, but only beer and a drill ? Go hungry ?
It has now occurred to me that you could round out the handle of the knife and put it directly in a drill. No need for all that extra fabrication. Just a spinning knife in a drill! How could I not think of this before? 😆😆
But... how do you feed the birds, and what with?
Los raspadores de pescado inoficiosos, lo demás muy útil
You know it's going to be special when it's preceded with a finger wag. 🤨
De las 26 solo una idea sirve.
7:56 I see you are doing it for the first time in your life.
so not a precision engineer then 🙂
Very funny clickbait
Intentional or not ...
y nosotros SOMOS GEEKS ..... te seguimos donde vallas, somos la familia geeks mas grande de internet !!!!!
Tu Nombre es Daniel Virgen y Nosotros , SOMOS GEEKS!!!!
My pre-watch prediction: It's a steampunk wiener.
Spart nicht nur Geld,sondern auch Gehirn.
4:31 👍
BRAIN ROT! I WANT MY TIME BACK!
nice
Приятная прогулка по лесу в инстументалке😂👍👍🤩😘
6:50 was just waiting for his fingers to get destroyed by that spade bit...cringe!
desperdicié 5 minutos de mi vida... luego vine a comentar... y ahora a cerrarlo
LOL!
These are just common physics knowledge. Fulcrum and weakest link stuff. Anyone doing construction OUGHT to know these kinds of solutions. How to make something structurally sound, getting things measured and aligned correctly, etc. 1:24 fulcrum. If you just understand that concept, you can do so much w/o even knowing the specifics beforehand. I use it all the time in the kitchen. Opening cans that have the tab. I bend the tab up, stick a pen into the hole and two fingers below the pen, pull BACK towards myself on the pen and it opens with such little force that a 2 year old could do it. But nice vid anyway. People who haven't thought along these lines can make their lives easier. I don't bother with trying to open bags and bottles and kitchen stuff with my hands as much anymore. Easier ways. Rubber mat for opening, exacto knife for all plastic bags and cardboard boxes, etc.
Why does my spaghetti taste weird?
Что за мастер такой, у которого нет циркуля? И вообще нормального инструмента?
謝謝!
謝謝!
Minute 2:59. Überprüfe mal deinen Winkel an einem Möbelstück, denn dieser Winkel hat keine 90° der ist Billigramsch.
w thumbnail
Wieder nur eine Ansammlung uralter Binsenweisheiten.