Just bought a 97 Red stepside. 4.3L V6 Clean. Its a nice little Truck had 136k original miles. Now seeing your Truck I`m goin nuts.Thats so badass, There is no question I got the bug,Thanx for sharing .
Bro truck looks amazing im only 19 I have a 94 4.3 s10 I'm wanting to build it up so bad hopefully I can make it look something like this just dope ash
Sorry to bother you with questions ! But I would like to know where did you get the 9 inch and how long flange to flange and also I was looking at your AC/heat blower! Where did you get that?
I don’t remember off hand the length. I would just call up quick performance and they can set you with everything u need and they know all the lengths. Google none a/c blower box. They have some one eBay as well
@@minitrucker04 I'm an old guy so I run a nasty 1st gen N/A stroker in my 94 Sonoma, my truck is absolutely rust free but it ain't as pretty as yours.......
When the truck was painted all the trim was pulled off and pull the windshield. No trim was painted and I believe they put new trim around the front windshield
Awesome build bro!!! I’ve got a 98 s10 that the 4.3 v6 is giving me fits…. It’s time to ls swap!!! Where did the center console come out of and was it a easy swap?
www.s10forum.com/threads/lsx-conversion-information.390967/ This has a lot of helpful information. I think it’s a pretty simple swap, current performance sells a lot of great stuff for the swap and the wiring harness. The console is a factory console. I think they came is the nicer models. Like sle and extreme
I modified the steering shaft. If u have instagram messages @thelsxs10 and I can send u a picture. I have also see someone notch the manifold but it’s a lot
Man, it’s so tricky to do a turbo LS in an s10 without hacking it up. Props to you, this is a very clean build! What trans you running? I have a 97 in the garage now, building a 5.3 for nitrous. Stock crank, drop in TSP forged rods/pistons, Truck Norris cam, through a 4l60 with 2800 stall, 8.5 10 bolt LSD 4:10 gear. Play with the progressive nitrous in this terminator X and dial it up linear as I can….Until I burn the trans and grenade the 10 bolt, anyways 😅
Thank u! I’m running a 4l80e trans with a circle d converter. On my old setup I had a ls1 making 440rwhp and I had the 10 build and it help up. I can’t say the same for the 4l60e. They can’t hold any power. The truck will be fun on some spray!
Thank u! Turbo is a forced induction s400, truck manifolds on backwards, yes I raised the sliders into the frame. Also did the fronts as well so the caltrac brackets don’t hang down so low
I like the S-10!!! , but the wheels & steering wheel "GOT TO GO AWAY!!!". LOOKS NOT RIGHT!!!. TRY SOME 17 OR 18 INCH CHEV Rally wheels!!!???. U could put on a RED FIBERGLASS TONEAU COVER ALOT BETTER THAN NOTHING!!... GOOD LUCK!!!.
If anyone wants to see build pictures of the truck u can find the @thelsxs10
I love every aspect of this truck! Excellent fit and finish in this build brotherman. I bet those welds are flawless!!!
Appreciate it man! It been a lot of hard work but has definitely paid off
Just bought a 97 Red stepside. 4.3L V6 Clean. Its a nice little Truck had 136k original miles. Now seeing your Truck I`m goin nuts.Thats so badass, There is no question I got the bug,Thanx for sharing .
Appreciate it man!
Good job man , love the full back exhaust
Appreciate it!
I had a built '98 in torch red. I miss that truck
Bad ass
Nice Truck... you can see the time and quality of this build from all angles.
Appreciate it man!
You have a gorgeous truck my friend!!
@@pedromontemayor1620 thank u!
Super nice truck man... very Tasteful... bet it runs good..
Thank u, 5 second 1/8 mile street truck
Jesus Christ on a bicycle!! That’s beautiful 😍
Appreciate it!
Any notification needed to the manifold to clear the steering shaft?
Yes
@@minitrucker04 to what extent? Killer build
@@stephnoriesend me ur email and I can send u a picture or u got instagram?
What engine do you have inside? Isn't it the original?
Awesome build man!
👌🏻👏👍🏼
Really do appreciate it!
What size of rear rims and backspacing. Did you have to shortened rear end? Thanks for video
Rim is 15x10 with a 4.5 bs. That should clear on a factory length rear end
Nice ride HOMIE
@@Bill-n6c4d thanks!
Very clean looking truck, can’t imagine the power that thing makes! I got a 2001 with a stock 5.3 (L59) and I feel it flies 😅
It probably make over 1000 hp. I turn it down on the street but it still rolls out. It will do 70mph burnouts
@@minitrucker04 I have no doubt believing that 😂😂 your nuts for driving this thing. I ain’t even going this big for my Silverado your brave bro 💪
@@MintMonte87ACSS312 you definitely have to be careful or it will get out of hand pretty quickly
Damn your truck is sweet
Thank u
Bro truck looks amazing im only 19 I have a 94 4.3 s10 I'm wanting to build it up so bad hopefully I can make it look something like this just dope ash
Thanks man, this was my first truck. I got it when I was 16 and I’m now 37. It doesn’t happen overnight
Beautiful build
Thank u!!!
What monoleaf part number did you go with?
What front end is that?
Sorry to bother you with questions ! But I would like to know where did you get the 9 inch and how long flange to flange and also I was looking at your AC/heat blower! Where did you get that?
I don’t remember off hand the length. I would just call up quick performance and they can set you with everything u need and they know all the lengths. Google none a/c blower box. They have some one eBay as well
Very nice build.
Thank u!
@@minitrucker04 I'm an old guy so I run a nasty 1st gen N/A stroker in my 94 Sonoma, my truck is absolutely rust free but it ain't as pretty as yours.......
Clean truck how did you do the steering shaft with the manifold on the driver side
Do u have instagram?
@@minitrucker04 yea I do I was looking at the pics but didn’t really see the steering shaft if you had to cut the manifold for clearance
What size is the exhaust off the turbo out to the rear? 3.5 or 4"
I have a 5 to 4” reducer off the turbo. It 4” exhaust all the way back and it does have a magnaflow race series muffler
How fast in the quarter mile?
8s
Did you paint the windshield side trim or are those replaced ? Same with door trim?
When the truck was painted all the trim was pulled off and pull the windshield. No trim was painted and I believe they put new trim around the front windshield
Awesome build bro!!! I’ve got a 98 s10 that the 4.3 v6 is giving me fits…. It’s time to ls swap!!! Where did the center console come out of and was it a easy swap?
www.s10forum.com/threads/lsx-conversion-information.390967/
This has a lot of helpful information. I think it’s a pretty simple swap, current performance sells a lot of great stuff for the swap and the wiring harness. The console is a factory console. I think they came is the nicer models. Like sle and extreme
I have a 1998 S10 SS. That’s the factory console in my truck
@@jasong712My factory 98SS has the split bench. The s10s had options which makes it easy to swap
Did you extend the control arms?
Yes
Man im having mad issues with getting my drivers side manifold to clear the steering shaft.. howd you do it
I modified the steering shaft. If u have instagram messages @thelsxs10 and I can send u a picture. I have also see someone notch the manifold but it’s a lot
Can you give me more info on headers and maybe some close up pictures?
Do u have instagram?
Are they just stock truck headers?
Is the rear end narrowed, if so how much I'm starting to build a 95 s10 with a lq9 6.0 ls
It’s a stock length
@@minitrucker04 what offset wheels
4.5bs
@@minitrucker04 it's a ford 9" rearend?
Yes
Nice truck. What front bumper is that?
Thanks! Google s10 street scene air damn
Dont know if i like the turf or truck better
How wide are the front rims?
17x4.5
Sick. Just sick
Thank man!
Kingslife in the building just sub my brotha
What’s up man! I really should make more videos of the truck and upload them
Had one just like yours bro. Only older. REGRET selling it. I could have done what you did. Nice.
Thanks man
@@minitrucker04 You're welcome.
Man, it’s so tricky to do a turbo LS in an s10 without hacking it up. Props to you, this is a very clean build! What trans you running?
I have a 97 in the garage now, building a 5.3 for nitrous. Stock crank, drop in TSP forged rods/pistons, Truck Norris cam, through a 4l60 with 2800 stall, 8.5 10 bolt LSD 4:10 gear.
Play with the progressive nitrous in this terminator X and dial it up linear as I can….Until I burn the trans and grenade the 10 bolt, anyways 😅
Thank u! I’m running a 4l80e trans with a circle d converter. On my old setup I had a ls1 making 440rwhp and I had the 10 build and it help up. I can’t say the same for the 4l60e. They can’t hold any power. The truck will be fun on some spray!
Gorgeous truck! Well thought out too! What turbo, what manifolds, and did you raise your sliders up into the frame? Thanks brothaman
Thank u! Turbo is a forced induction s400, truck manifolds on backwards, yes I raised the sliders into the frame. Also did the fronts as well so the caltrac brackets don’t hang down so low
coincidentally i just bought a 94 S10 the other day, and i’m 16
cheese n Christmas. Amazing
Thank u!
Man it's clean wanna trade for a nice 2002 camaro
No thanks
Is. It. For. Sale
I don’t think I’ll ever sell it
👍🏾
🙌
One Word, WICKED!!!!!
Thank u!!!
I like the S-10!!! , but the wheels & steering wheel "GOT TO GO AWAY!!!". LOOKS NOT RIGHT!!!. TRY SOME 17 OR 18 INCH CHEV Rally wheels!!!???. U could put on a RED FIBERGLASS TONEAU COVER ALOT BETTER THAN NOTHING!!... GOOD LUCK!!!.