Glad you liked it. I had a TBR header exhaust on my 1997 Valkyrie and loved it. It had 2 can mufflers that were like 4.25 inch openings. It made the Valkyrie sound like a cross between a small block Chevy and a Porsche in heat at WOT! Loved that pipe. This might be the way I go on my 2021 F-3S. If the weather ever improves here in the Midwest. Today it was still in the teens! 🥶🥶🥶🥶🥶
OK, for most of us outside the USA you will have to buy the US muffler bracket as well. At least here in Australia you will need to go to your Can Am dealer and ask for the bracket for hanging the Akropovic system. Should cost you about $70. Put mine on today...sounds wicked! For the record, I had the similar TB pipe on my 2013 RSS..... the F3 with the bigger engine gives out I would say 30% more noise! The OEM system I took off with the CAT was soo heavy!
Was there any loss of power on the mid range? You tuber Shawn Smoak complained about losing midrange. Two Brothers stated in e-mail that it will just move power around(increase lower and higher end power). Two Brothers could not Dyno to get a baseline vs the new exhaust based the three wheel stability control. Anyways, what are your thoughts on the impact to power? Anyone have any thoughts on power impact?
I really liked your review of the pipe. I have the same bike. I bought the same pipe! My neighbors LOVE it as well, NOT! What other mods have you done?
Hey love the video but please tell me how good is the two brothers mufflers can you tell the difference between the performance from the stock because I'm getting the f3 spider
Rule One in exhaust recording is Nerver Never record inside an enclosed space. Rule Two is don't stick the camera up close to exhaust exit point. Think about where you ride and where you or someone else's ears would be. Class over. :)
I put the tip on mine and it changed the sound almost like a flutter noise.. in my opinion dont get the tip leave the pipe as is sounds good with out it.
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
Yeah! Sounds great! Just record a start off, braking to a stop, and a fly-by with your new pipe.
Glad you liked it. I had a TBR header exhaust on my 1997 Valkyrie and loved it. It had 2 can mufflers that were like 4.25 inch openings. It made the Valkyrie sound like a cross between a small block Chevy and a Porsche in heat at WOT! Loved that pipe. This might be the way I go on my 2021 F-3S. If the weather ever improves here in the Midwest. Today it was still in the teens! 🥶🥶🥶🥶🥶
OK, for most of us outside the USA you will have to buy the US muffler bracket as well. At least here in Australia you will need to go to your Can Am dealer and ask for the bracket for hanging the Akropovic system. Should cost you about $70. Put mine on today...sounds wicked!
For the record, I had the similar TB pipe on my 2013 RSS..... the F3 with the bigger engine gives out I would say 30% more noise!
The OEM system I took off with the CAT was soo heavy!
Awesome looking that will be next years project to put on my F3.
Thanks for posting. I think I'll go with a tip though as I like to hear the music in my helmet.
I love watching things I cant afford 😁😁 nice video sir....
How much does this cost? where can I purchase this exhaust.
Great review!
Nice looking pipe, but its nothing like my TB Dual set up on my 08 RS. I wish they would come out with same for the F3.
Great sound!
Todd, do you have a part # for this as there are TB exhausts on Ebay that look a little shorter in the muffler than yours.
Where did you get the whole assembly? I am interested in the cat bypass pipe. Two Brothers says they don't sell it, who does?
Todd, did you notice any performance gain, or fuel mileage difference up or down?
+bluedeval03 not really, the fuel mileage is SOOO much better than the RSS. I can go forever on a tank.
Can you post a link for the exhaust please!
Was there any loss of power on the mid range? You tuber Shawn Smoak complained about losing midrange. Two Brothers stated in e-mail that it will just move power around(increase lower and higher end power). Two Brothers could not Dyno to get a baseline vs the new exhaust based the three wheel stability control. Anyways, what are your thoughts on the impact to power? Anyone have any thoughts on power impact?
I really liked your review of the pipe. I have the same bike. I bought the same pipe! My neighbors LOVE it as well, NOT! What other mods have you done?
+Joni Lyons that's about it for now
very nice, that pipe is definitely longer and looks nicer than what they sell now, which one do you have?
Did you rip out the catalytic converter as well? Looks good.
+Brandon Bowers no
do you have a part number for this specific exhaust you have? Thanks
Hey love the video but please tell me how good is the two brothers mufflers can you tell the difference between the performance from the stock because I'm getting the f3 spider
+T.House Can't tell a huge difference, bike's pretty fast as is...but it definitely sounds a hell of a lot meaner.
Did you have to do a power commander?
Do u still have the 2015? Or did you upgrade
Is it this one? Two Brothers Racing Exhaust Can-Am Slip-On Stainless Steel 005-4230409-S1
I have a 2016 F3-T Manual.
Bro you still got ur bike??? Make a vid 👍
Still no reply on the part number Todd.....?
+Ian McKay My bad man, It's the only one that 2 Brothers sells.
Rule One in exhaust recording is Nerver Never record inside an enclosed space. Rule Two is don't stick the camera up close to exhaust exit point. Think about where you ride and where you or someone else's ears would be. Class over. :)
I put the tip on mine and it changed the sound almost like a flutter noise.. in my opinion dont get the tip leave the pipe as is sounds good with out it.
All u did was just added the pipe to stock ?