I just did the clutch and dual mass flywheel, release bearing, lower arms, oil, oil filter, air filter, pollen filter, fuel filter, gearbox driveshaft seals and perhaps a few other bits I can’t recall on my 2013 Alfa Romeo Giulietta, it’s a very similar design to the Astra and it’s an absolute nightmare. The positioning of the starter bolts is a joke. Took me 13 hours by myself from start to finish. Massive props to you for doing this regularly in a lot less time. ❤
Kevin, congratulations on hitting 100k subscribers! I wish you good health and success in your business! I've only been following you for 3 weeks, but now every breakfast and dinner I spend watching your fantastic work:) I've already taken a lot of useful notes, screenshots and gained a wealth of knowledge. Thank you for your efforts, keep up the good work! Greetings from Kyiv, Ukraine!
I’m glad the videos are adding in some small way to your daily routine .. thanks for the kind words and for subscribing to the channel. Keep your head up over there in your part of the world ☮️
Kevin great work as always. Have you done any renault kangoos 2004-2007 with a 1.5 diesel as mine needs to be changed soon with 315000km on the original. No slipping yet though.
That selector in the VW looked loose! What happens if you find something else worn out or you break something? Congratulations on 100k! Probably the same amount of clutches you have done over the years! 😁
Looking for you on UA-cam and found the channel again. Use to watch you. Few years back and admire your work. Then sort of just fell off the last few years. Gonna subscribe and not let it happen again haha. Btw what sort of cordless ratchet do you use?
Kevin enhorabuena por esos 100k espero que yo también llegue a esos suscriptores que tanto cuesta conseguir. I me encanta como tu trabajo lo haces fácil. Esos son años de Experiencia 🤌 Un placer i seguiré viendo los videos desde Benaguacil ( Valencia ) España
Well done Kevin 100k I've been following your channel for a long time now and I've got to say I've really enjoyed it and I look forward to the weekend knowing you will be uploading I know I always say I appreciate your uploads but I really do thank you so much 👍 massive congratulations to getting to 100k well done 👍
Thank you Matt. You’re definitely up there amongst the top 3 subscribers who’s been showing support and helping the channel to grow. Hopefully you’ll be seeing the next phase at some point this year 🍻🍻🍻🍻🍻
Firstly Kevin, Congratulations on 100K Subscribers,Well Earned! I'm loving the new mean green trolley jack,magnetic tray holder as well to store all those nuts and fittings as you remove them. Got a question mate as i'm no expert,at 1.25.47 when you were working on the Ford KA,i saw 4 small bearings in a small gap on the bottom of the box?
Congratulations on 100k God bless you and your family from Jays maintenance LLC Connecticut USA. As always this week will be an inspiration for me to keep plugging along!!
Full send bro never lift 😏 🤙 mobbin deep 🙌 Congratulations on hitting 100K subs yaeeyaae hope one day soon you do a mitsubishi evo x gsr transmission so I see how the master does it have a good week bro
100,000 subscribers mr..nice one , long may your channel grow man..well deserved after all the grafting over the years ive been watching..happy days kevin.👍
Well done on the 100k subs, deserved. Thanks again for the aisstance I will get that bloody thing moving yet. I can't find that seal so might have to try and replace the slave , I have heard it's possible without dropping everything but very tight, we'll see anyway, well done and deserved.
Email me your delivery address and I’ll mail a couple of them to you. And if possible send a few photos from underside and top of the gearbox where connector goes into slave.
@@WMCS Hi , Appreciate the help, I have sent something to cover postage etc. I have a couple of photos of the section where the pipe goes into the slave at top of gearbox I'll get them sent off to you, and again thank you.
www.williamsmobileclutch.co.uk 🇬🇧
Contact us for your clutch replacements
0:09 2012 Vauxhall Astra CDTI 165 Ecoflex 2.0L Diesel.
39:20 2010 VW Passat Sport BlueMotion Tech TDI 2.0L Diesel.
1:10:39 2010 FORD KA Zetec TDCI 1.3L Diesel.
1:42:46 2009 Toyota IQ VVT-I 1.0L Petrol.
Excellent Videos Kevin, the best anti-stress therapy while learning a lot from a TEACHER. Greetings from Uruguay
Greetings. I’m glad the videos are to your liking. 🍻🍻
I just did the clutch and dual mass flywheel, release bearing, lower arms, oil, oil filter, air filter, pollen filter, fuel filter, gearbox driveshaft seals and perhaps a few other bits I can’t recall on my 2013 Alfa Romeo Giulietta, it’s a very similar design to the Astra and it’s an absolute nightmare. The positioning of the starter bolts is a joke. Took me 13 hours by myself from start to finish. Massive props to you for doing this regularly in a lot less time. ❤
Ah yes… I know exactly what you’re on about .. 🤪🍻🍻🍻
I removed the egr valve on the diesel versions then the starter bolts are right there from the top. Just 2 bolts for the egr.
Kevin, congratulations on hitting 100k subscribers! I wish you good health and success in your business!
I've only been following you for 3 weeks, but now every breakfast and dinner I spend watching your fantastic work:) I've already taken a lot of useful notes, screenshots and gained a wealth of knowledge.
Thank you for your efforts, keep up the good work! Greetings from Kyiv, Ukraine!
I’m glad the videos are adding in some small way to your daily routine ..
thanks for the kind words and for subscribing to the channel.
Keep your head up over there in your part of the world ☮️
100k kev!!! Well done very much deserved!! You are a 💎
Thanks Lee.. I’m slowly moving up in UA-cam realm 😁🍻🍻
i have worked as mekanik fo about 10 years now in garage with tools so i have lots respect for you.
Thank you.
Toyota to prawdziwy dramat pewnie zostało parę śrubek do wyjęcia całego napedu😮
Kevin great work as always. Have you done any renault kangoos 2004-2007 with a 1.5 diesel as mine needs to be changed soon with 315000km on the original. No slipping yet though.
That selector in the VW looked loose! What happens if you find something else worn out or you break something? Congratulations on 100k! Probably the same amount of clutches you have done over the years! 😁
Looking for you on UA-cam and found the channel again. Use to watch you. Few years back and admire your work. Then sort of just fell off the last few years. Gonna subscribe and not let it happen again haha. Btw what sort of cordless ratchet do you use?
100,000 subscribers!!! Share with us an image of the trophy when you receive it Congratulations my friend 🙏🏻🍻🍻🎉🎉🎉
Thank you for always touching base. It’s always great to read your comments. I’ll definitely make a short commentary video when I get the plaque 😁🍻🍻
@@WMCS 🙏🏻👏🏻🍻
Kevin enhorabuena por esos 100k espero que yo también llegue a esos suscriptores que tanto cuesta conseguir. I me encanta como tu trabajo lo haces fácil. Esos son años de Experiencia 🤌 Un placer i seguiré viendo los videos desde Benaguacil ( Valencia ) España
Thank you.
Saludos bendiciones mui viene excelente semana y por trasmitir Los vídeos esperándolos sinpre👍👌
Thank you 🙏🏽
Well done Kevin 100k I've been following your channel for a long time now and I've got to say I've really enjoyed it and I look forward to the weekend knowing you will be uploading I know I always say I appreciate your uploads but I really do thank you so much 👍 massive congratulations to getting to 100k well done 👍
Thank you Matt. You’re definitely up there amongst the top 3 subscribers who’s been showing support and helping the channel to grow. Hopefully you’ll be seeing the next phase at some point this year 🍻🍻🍻🍻🍻
thank you thank you thank you i wait your videos every week thanks i am Beginner mechanic
Hope you find some good values in them.
Thanks for watching 🍻🍻
That looks like a very dangerous way to earn a living.
I think the customer was trying to stir up a conversation 😅
Hi what model milwalkee ratchet do you use
Love watching your video it's like watching a artist complete a masterpiece
Thanks for the feedback 😁🍻🍻
At 1:05:21 that bolt that pop out had me ducking .
That Gearbox looked a bitch to get back in on the red car!
Firstly Kevin, Congratulations on 100K Subscribers,Well Earned! I'm loving the new mean green trolley jack,magnetic tray holder as well to store all those nuts and fittings as you remove them.
Got a question mate as i'm no expert,at 1.25.47 when you were working on the Ford KA,i saw 4 small bearings in a small gap on the bottom of the box?
Thanks for feedback. The bearings was from the collapsed clutch thrust bearing.
It had completely blow up and caused considerable damage to the slider
@@WMCS
Thanks Kevin.
You are the Best!🥇🥇🥇
🤝🤝🤝🤝🤝💪💪💪💪
Klasse Arbeit ,du bist immer sehr gut vorbereitet , jeder Handgriff sitzt 🎉
Thank you. Really appreciate the feedback
100k subs man! Well deserved.
Thanks man .. really appreciate the support. Means a lot.
100.000 😊
Passat differend story😊
100k!!!! Congratulations brother.. It's about time 😁
Congratulations on 100k God bless you and your family from Jays maintenance LLC Connecticut USA. As always this week will be an inspiration for me to keep plugging along!!
Full send bro never lift 😏 🤙 mobbin deep 🙌 Congratulations on hitting 100K subs yaeeyaae hope one day soon you do a mitsubishi evo x gsr transmission so I see how the master does it have a good week bro
100K subscribers, well done Kevin 🏆👍
Thank you Mike .. you’re definitely on my top 3 list of best subscribers.. I’m working on a new set up and will have you round once completed ..🍻🍻🍻
looking forward to that already Kevin@@WMCS
Astra disaster😅
🔧Great job
Nice job bro ❤
I'm really impressed! You do a great job without lots of engine lifts and special tools. 🙏
100k 😀👍❤️🇸🇪
Thank you
so sorry i am late watching looks like you are busy this week .thanks for the video
100,000 subscribers mr..nice one , long may your channel grow man..well deserved after all the grafting over the years ive been watching..happy days kevin.👍
Thankyou for supporting the channel and dropping a comment every now and again. Very much appreciated 🍻😁
Absolutely brilliant on 100,000 subs,kev,,awsome,,well done mate.😊😊
Thank you
👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
Felicidades por los 100k 👍
CONGRATULATIONS KEVIN
Well done on the 100k subs, deserved. Thanks again for the aisstance I will get that bloody thing moving yet. I can't find that seal so might have to try and replace the slave , I have heard it's possible without dropping everything but very tight, we'll see anyway, well done and deserved.
Email me your delivery address and I’ll mail a couple of them to you.
And if possible send a few photos from underside and top of the gearbox where connector goes into slave.
@@WMCS Hi , Appreciate the help, I have sent something to cover postage etc. I have a couple of photos of the section where the pipe goes into the slave at top of gearbox I'll get them sent off to you, and again thank you.
Brilliant job as allways😊
Good work 👍
Congratulation to 100k subscribers. And thank you for this weeks video.
Hope you will have the best easter.
Regards from Sweden,
Thank yin for tuning in and taking time to leave a review every week. It’s very much appreciated. God bless 🍻
BTW, that red vauxhal seemed to have had a blowout in the coolant expansion. Hope it´s not a blown headgasket
@@WMCS Feels like "home" listening to the tools and "feeling" the weather.
Highlight of the week every sunday.
Thank you Kevin.
Congratulations on 100,000 subscribers job well done and well deserved!! From Jay’s Maintenance LLC. USA
Отличная работа .лайк
Thank you.