Це відео не доступне.
Перепрошуємо.
DIY Propane Fire Cannon - Great Halloween Effect
Вставка
- Опубліковано 11 жов 2020
- *CAUTION* BUILD AT YOUR OWN RISK**
Your build may differ slightly to mine based on the your holding tank and or your solenoid. Below is a list of what I used to build my fire cannon and links to where you can get the same fittings.
Holding Tank amzn.to/33QnkbG
1/4" flare (f) to 1/4" npt (m) amzn.to/3jMSq9E
(2) 1/4" npt pipe tee amzn.to/3dl31pT
(3) 1/4" npt pipe nipple amzn.to/3lBjLw3 (5 pack)
1/4" brass ball valve (f/f) amzn.to/3jQmvVO
1/4" npt (m) to 3/8" (m) adaptor amzn.to/30WEMJR
Propane hose w/ regulator amzn.to/34T1TG6
1/4" npt (m) to 1/4" compression (f) I found this at my local Ace Hardware
1/4" flexible copper amzn.to/3lGfuau
1/4" npt (f) to 1/4" npt (f) with pressure gauge (link soon)
1/2" npt (f) to 1/2" npt (f) bushing amzn.to/30Z9yld
1/2" npt (m) to 3/4" npt (f) reducer amzn.to/3dlOoTk
3/4" npt nipple amzn.to/310o3Fg
3/4" brass 110v solenoid amzn.to/3lzY4fV
3/4" x 6' npt pipe Any hardware store that carries cast iron pipe
Thank you for taking the time to watch my video.
I am a creator of things, a metal artist, a maker of stuff, a woodworker, a welder, and a bohemian traveler of the world.
I hope to inspire, motivate, teach and be a part of the lives that seek to become creators of their own wonderful creations.
I rely solely on creating and building custom projects from metal and or wood. If there is something you would like to have created, then you can either reach out to me here on UA-cam, email me at rogueartist@artfullyrogue.com or check me out on my other social media platforms.
Good old snail mail:
16845 N. 29th. Ave #517
Phoenix, Arizona 85053
Send your stickers and I’ll return one to you.
Visit my Etsy Shop:
www.etsy.com/s...
Visit my website:
www.artfullyrog...
And follow me on social media:
/ artfully_rogue
/ artfullyrogue
There's nothing quite like the giggle of grown ups playing with fire.
Heck it even made me laugh again during the edit :)
For a harder to blow out pilot flame, Get yourself a piece of brass tubing and crimp or otherwise close one end, drill 3 or 4 1mm holes on the side of the tubing and go right through to the other side. Stuff the inside with medium grade stainless steel wool if you want a flash-back arestor. Then braze onto the end of the copper tubing. You now have a multi-jet pilot assembly. I actually use spent .22 cal rifle brass... saves closing off one end and the existing opening where the slug was fits right onto the copper pilot tube for brazing.
After I first few attempts my buddy mentioned the same pilot light suggestion. Next time I can work on it, that is a mod I will do for sure
Thanks for the video Doug. Love hearing both of you giggling like a couple of naughty school boys. keep safe and stay well.
We had such a great time building this thing. But then to see it in action, it kind of felt we might get caught by someone...just not sure who :)
Add air compressor to the mix. Higher flames.
Good idea!
Great project It's good to watch you Guys having fun 👍 😁
That's An AMAZING setup, sounds like you were Extremely happy.
Haha yeah we had a lot of fun building it for sure
Looks like a fun build Doug! I need one for my patio it’s getting chilly in MN🤔
This will keep you warm for sure!
Well that WOKE , me up . Following your design, on all the fittings , and Values is a Good Design .I like, I like. Great Video Doug , tell Robin Good Job !!
Talk Soon Barry and Marlene
Thanks Barry! It was such a blast (literally!!) to build this one
I think there's a six pack, fifth of whiskey and some propane in the yard about to happen. Thank goodness I subscribe to Life Flight!
haha six pack for sure! this was such a fun project
Doug awesome video and project
Thanks Jared! As you can see we had a great time with this build.
Awesome. Fun project. I totally get the whole fittings issues. Every time I got to HD or Lowe’s looking for fittings for a propane related project or even airlines I end up with twice what I need to be sure I actually have what I need. I wonder if you could find a 12v valve to make the system portable. Like hanging of the back or front of the bus. Switch on the steering wheel. Mad Max style. 😁
I actually started with a 12v solenoid however it had a bad seal and wouldn't stay closed. So I went to the 110v solenoid
Most freon tanks have a check-valve in it (to prevent refilling) . I'd suggest testing it to see if it's even being filled with propane. My guess is it's not. (unless you modified the valve off-camera)
ha! that's cool man! 🤙
Thank you so much Rob!
Good vid
Thanks Sterling
I get the tubing and fittings, but what’s the need for the tank? Does it just act as a reservoir for the propane? Why couldn’t you just run it all off the propane hose, no extra tank?
the propane tank as i understand it, is liquid propane. going into the second tank allows the propane to collect as a gas. A buddy of mine runs a huge fire cannon system in Las Vegas and he tipped me off to the reservoir tank. He also mentioned, if you plan to run it a lot, place the propane tank in warm/hot water so the tank doesn't start to freeze.
The valve with the gauge on it, was that there to regulate flow, or something else?
Just a question, the propane regulator, is that a high pressure one?
Yes I believe it is. We wanted to keep the pressure at or just below 100psi