Any ideas on my problem here? I installed one of these and it worked great for a few months but then all of a sudden when I turn it on it makes a loud "duh duh duh" noise and the water shuts off. I have to use the regular faucet (i have a kitchen faucet that has a drinking water tap together, only the drinking water one is filtered) and jerk the water handle off to full flow real fast to get the water filter tap to flow again. How do I fix this?
So the inlet could be clogged up and the faucet cartridge could be clogged as well. I would try turning your valve off and on while the faucet is open. If you get the same results try directly connecting the faucet again. This will show you if it’s the filter or the faucet that is the problem! Good luck.
Too much Water pressure . Shut off cold water line then open the faucet then remove water filter. And then have ur finger push on the tip of the water filter where u install water filter. After that install water filter back then open water line . U will have water back .
Great help, THANKS!!!😊
Of course!
Thank you a million times 👍
Good man thanks for this, made it very simple. Getting mine tomorrow
Absolutely! And I can report that I’m still happy with mine!
Super helpful,thanks so much!!!
Thanks!
No problem!!
Thank you!
Of course!!
Ty ,great help.., well done
Can the waterdrop be mounted horizontally without affecting performance? i.e. at 90 degrees from the recommended mounting orientation
how long before that 70$ plastic filter leaks all over the house? I’m terrified to use this filter setup.
I’ve been really happy with mine so far I’ll say! It seems well made to me.
Been using mine close to 2 years now,, no issues at all so they seem pretty good as of now.
@@DaveDocDIY does this remove Fluoride?
So is the hot water is not filtered through this product or both waters are filtered
Hot water is not filtered only cold.
Wow what a nightmare of a drainage setup under that sink
Yeah I’ll be changing it. They used the flex lines to tie into the vent 😂 at least it’s not the actual drain 😅
Yea very true indeed. It’s amazing the rigs that “handymen” can come up with.
Can this be connected to the refrigerator water line with 1/4 braided stainless steel hoses?
If you use a 3/8” to 1/4” adapter I don’t see why you can’t.
Any ideas on my problem here? I installed one of these and it worked great for a few months but then all of a sudden when I turn it on it makes a loud "duh duh duh" noise and the water shuts off. I have to use the regular faucet (i have a kitchen faucet that has a drinking water tap together, only the drinking water one is filtered) and jerk the water handle off to full flow real fast to get the water filter tap to flow again. How do I fix this?
So the inlet could be clogged up and the faucet cartridge could be clogged as well. I would try turning your valve off and on while the faucet is open. If you get the same results try directly connecting the faucet again. This will show you if it’s the filter or the faucet that is the problem! Good luck.
Too much Water pressure . Shut off cold water line then open the faucet then remove water filter.
And then have ur finger push on the tip of the water filter where u install water filter.
After that install water filter back then open water line . U will have water back .
What do I do when I have a water hammer adapter on my T bracket