Thank you very much mate. I have learned a lot from you. I'm starting to gain customers now because of your help. Here in Philippines tattoo is very popular but we only have a few tattoo artist.
You get used to what hurts people and what doesn’t over years of experience, whenever you go into a traditionally painful area, you must always be ready for a flinch 👀
Im a fan of your videos. I am new on learning how to tattoo and your videos help me a lot. Is thier a video of you preparing ink pure black and with some water??
Heya, just found you and I'm so glad I did!! Going to use this lockdown to try and just watch and learn as much as I can. What power pack do you use? Thank you so much for sharing the knowledge 😍
What brand of ink do you use for white? I have trouble getting white to take. Also does any certain size needle cartridge 3,5,7,etc make it easier? Or type RL,RS,Mag,etc? Voltage or hand speed? I need advise. Thanks
You should be does some kind of class , like how shade very soft w the 9 Magnum niddle , , but let me said something ,, You really did a Nice job , congrats
Cheyenne 5rs and 9 mag se #10 Bro? I’ve been working with the 10 masters course for a wile now, but your tech is soooo much faster and deliberate and I bet the heal out is perfect with little to no second session…..F-ing SMOKE SHOW OLIVER!
I think the shader hits identicsl to the phantom i used the phantom again cause i was sterilizing the grip and i ran out of disposables and i swear their very similar both have the same hit maybe its the 3.5 stroke but i use them both at 8.8 volts they seem to gave the same speed..
I was wondering if maybe you could help me. I work black and great and specialize in portraiture. I’ve been following you and have seen you grow within you work! Great bro... is there anyway you can take a lil time to check my work and critique it maybe? It’s caught a lot of attention and am told it’s amazing. We can conspire through email if you will sir. It would mean a lot bro! Lemme know I think you’d be proud!! Great work btw!!
Cool man! Congratulations for your works and informations you being sharing! Btw. About the, Cheyenne and Kwadron, does that mean that Kwadron shaders and Magnums are not worth to keep up against Cheyenne’s??
@@juno4063 yeah so I find the Cheyenne mags are probably the best I’ve used for consistency kwadrons shaders moved around abit where their liners were solid! And Cheyenne’s were the opposite
I use Empire inks the David vega set right now but I also use the Dynamic triple black diluted into (full cup black) (half cup full) (8 drops) (4 drops) ( 2 drops) (1 drop)
Funny you mention that, I went back to Inkjecta yesterday just to have a change and the bishop was so much better to use and a lot kinder on the skin! The Inkjecta is very hard to get set up just right for different peoples techniques, bishop shader is amazing all their wand collection are amazing!!!
Thank you very much mate. I have learned a lot from you. I'm starting to gain customers now because of your help. Here in Philippines tattoo is very popular but we only have a few tattoo artist.
Good morning from Texas!! I’m not a tattoo artist by far, but love watching it done. Nice piece.
Love how you handled the client when they moved suddenly 🙏🏾
You get used to what hurts people and what doesn’t over years of experience, whenever you go into a traditionally painful area, you must always be ready for a flinch 👀
Greetings from Mexico. Thank you for always sharing your processes and videos. Thanks to them I have learned a lot.
This is my new favorite channel
👏 nice work n well done to da dudes 1st piece
Im a fan of your videos.
I am new on learning how to tattoo and your videos help me a lot.
Is thier a video of you preparing ink pure black and with some water??
This piece s dope🔥...
thanku oliver for sharing your talent what white are u using pls
Nice piece, thanks for sharing 👌
I had to rewind a couple times I was dying “yeah baby I like it Raw!” 😂😂 odb
Heya, just found you and I'm so glad I did!! Going to use this lockdown to try and just watch and learn as much as I can.
What power pack do you use?
Thank you so much for sharing the knowledge 😍
WOW that’s incredible bro 😲 ❤️
I love watching your live work
Essa tá monstra parabéns show 👏
Cool gracias
hai ser i just asking how to make your black and gray or how mex.
New subscriber, enjoy your videos, very informative. Keep up the great work, kudos.
Thanks for the support brother!
Can you tell me what kind camera/ lighting/or phone camera you use?
Love the work!!!
I know it essentially depends on hand speed, but whats your preferred voltage with the Bishop for bng realism style pieces?
Excelent tattoo bro !!!!
What brand of ink do you use for white? I have trouble getting white to take. Also does any certain size needle cartridge 3,5,7,etc make it easier? Or type RL,RS,Mag,etc? Voltage or hand speed? I need advise. Thanks
You should be does some kind of class , like how shade very soft w the 9 Magnum niddle , , but let me said something ,, You really did a Nice job , congrats
You are very good.i see your móveis 1000 times.You have a beatyfull Stile.
Hey bro!! What's that Green Jam on your left hand? Great fucking work
I learn a lot watching your video. Thanks so much @lauragtattoo
Name of the stencil ink and the printer, please.
We are day by day better,great tattoo,be good.
How u make the shading? The light shading its not deep the neddles?
Oliver what is your needle throw for your smooth shading on this piece???
Your client seems to have a bit of a problem with pain. he seems to move a lot. does it happen often clients that move like that?
Hello, which size does your ink caps have? 16mm?
I think they are a large cup with the base on them so they don’t topple over 🙏🏼
Thx sir for live
Cheyenne 5rs and 9 mag se #10 Bro? I’ve been working with the 10 masters course for a wile now, but your tech is soooo much faster and deliberate and I bet the heal out is perfect with little to no second session…..F-ing SMOKE SHOW OLIVER!
u make your own grey wash? if so what’s the diluting ratio to mixing solution u use?
what voltage did you used for smoth shading man?Thank you
Where y'all from?
What volts do you use for the face or do you not change speeds? Thanks.
He said 8.5 volt. All his video has says he never change voltage when he start tattooing
Exactly what Emmanuel said :)
I think the shader hits identicsl to the phantom i used the phantom again cause i was sterilizing the grip and i ran out of disposables and i swear their very similar both have the same hit maybe its the 3.5 stroke but i use them both at 8.8 volts they seem to gave the same speed..
I was wondering if maybe you could help me. I work black and great and specialize in portraiture. I’ve been following you and have seen you grow within you work! Great bro... is there anyway you can take a lil time to check my work and critique it maybe? It’s caught a lot of attention and am told it’s amazing. We can conspire through email if you will sir. It would mean a lot bro! Lemme know I think you’d be proud!! Great work btw!!
woww very nice brooo
How fast do you run your bugpins compared to standard?
Same volts as all my other needles I run the bishop wand liner at 6.1V and the shader at 8 - 9v
yo oliver why is it that you do not use liner from chyenne but kwadron?
Because Cheyenne’s liners are so bad!
Cool man! Congratulations for your works and informations you being sharing! Btw. About the, Cheyenne and Kwadron, does that mean that Kwadron shaders and Magnums are not worth to keep up against Cheyenne’s??
@@juno4063 yeah so I find the Cheyenne mags are probably the best I’ve used for consistency kwadrons shaders moved around abit where their liners were solid! And Cheyenne’s were the opposite
@@OLIVERAYRE what about the da Vinci carts ? How do you rate those compared to the kwadrons and black claw ?
Wont the wound not take color?
Beautiful brotha..
Client was clearly struggling LOL
What kind of machine
Bishop Wand Shader dude! Insane machine!!!
Boa tarde mano queria ganhar uma máquina de tatuagem sua moro no Brasil
Why use a 17 and a 15 mag would the 15 mag do exactly the same thing why use them both???
I just feel the 17 mag is more consistent in a larger area!
@@OLIVERAYRE respect from Montréal and thanks for the answer brother
Got the wand shader because of you can't wai to receive it
@@mobinknox dude its insane! Run it at around 7-9 volts according to hand speed 🙏🏼
@@OLIVERAYRE say no more ill try that for sure and keep the Chanel booming everything you say is good to know brother much respect
🙏🙏🙏👌💪🤘
I wonder how long does it take to finish this piece
Most pieces I do normally take me between 3.5 - 5 hours, I work fast, tried slowing down but just can’t takes me out of my rhythm
@@OLIVERAYRE why slow down if this works for you? x
Diluiton set? How many drops?
Search his videos. He breaks down the process. Love and light.
I use Empire inks the David vega set right now but I also use the Dynamic triple black diluted into (full cup black) (half cup full) (8 drops) (4 drops) ( 2 drops) (1 drop)
Thanks a lot 🙏
What happened to his arm? The scratches,
Hi...what you prefer ..inkjecta _ bishop ?
Funny you mention that, I went back to Inkjecta yesterday just to have a change and the bishop was so much better to use and a lot kinder on the skin! The Inkjecta is very hard to get set up just right for different peoples techniques, bishop shader is amazing all their wand collection are amazing!!!
nice
Uau
U dont cover you machine with plastic..!!!
That's actually a not so good piece. Eyes are way to unrealistic and the over use of the white is a travesty