How to make 3D silicone transfer logos stickers
Вставка
- Опубліковано 4 бер 2018
- #TransfeSilicone #Transfersiliconelable #TrasnferPrintingSiliconeInk #SiliconeStickersMaterials
This Video shows how to make transfer silicone stickers,
Silicone logo,Transfer logo,transfer silicone ,silicone transfer stickers by glue
Silicone ink PET films:
Two types : one is glossy coating film which will be glossy after heating press on fabric ,another one is matte finish effect after heating press on fabric.
Mesh number: 120-200 , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks.
Squeegee:65-80 degree .
Printing tips:
1.Silicone ink color layer printing for 3-4 layers :
Silicone ink XG-866A-2Y 100G
Pigments or special powders 10-20G (10-20% white&fluorescent 15-20% other colors 10%)
Catalyst XG-866B-2 2G 2%
Thinner XG-128AH 10-20G 10-20%
Flash by 100 to120 degree.
2.Silicone ink clear layer printing 2 -4 layers if needed for high density stickers,if need more high density then print more times clear.
Silicone ink XG-866A-2Y 100G
Catalyst XG-866B-2 2G 2%
Thinner XG-128AH 10-20G 10-20%
Flash by 100 to120 degree.
3. Mid layer crossing linker printing for 2 times:
Crossing linker XG-360Z-2 50G
Crossing linker agent XG-360ZB 2.5G 5%
Flash by 100 to120 degree.
4.Hot melt glue XG-360R-2X print for 4 layers. To use cyclohexanone to liquid the glue,mixing ratio 10%.This type of glue easy to be thick and mesh clogging ,so if feel thick and hand to print then can mix with some cyclohexanone to liquid it and get easy printing.
Flash by room temp or by 80-100 degree.
5.After finish, put into the oven to bake by 100-120 degree for 40 minutes to 1 hour.
6. Press the stick on the heat transfer press machine by the temp of 160-170 degree for 10-16 seconds with pressure of 4KG.
Huizhou Yirun Silicone Co.,Ltd. ; Guanzhou Xinguang Silicone Co.,Ltd. ;XINGUANG SILICONE(HK)CO.,LIMITED
For more information of our silicone ink kindly refer to :www.screenprintingsilicone.com
And if any needs or questions,kindly contact with Belinda 15899645234 ceo@xgsilicon.com
www.screenprintingsilicone.com
More heat transfer video:
• XG silicone brush stic...
• XG silicone for heat t...
good
Thanks!
Which chemicals used for make it.
silicone ink ,crossing linker and glue
the preparation you made for how many sheets it yields?
This only for ink test ,we produce and sell silicone ink and materails, do not do bulk screen printing.
Im doıng HD trasfer prınt
TDS Of Xinguang Transfer Silicone Ink
1.Silicone ink PET films.Two types :one is glossy coating film which will be glossy after heating press on fabric ,another one is matte finish effect after heating press on fabric.
2.Mesh & Squeegee :Mesh number 100-150(40T-60T) ,Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks .It will be better to use 65-80 degree Squeegee.
3.Silicone ink color layer printing :Silicone ink XG-866A-2 mixing with 5-12% pigments ,and 2% catalyst XG-866B-1 or fast dry catalyst XG-866B-2 ,then 5-10% thinner XG-128A(thinner is not necessary).Print for 3-5 times,dry after printing every time by 120 degree
4.Silicone ink layer printing: Silicone ink XG-866A-2 mixing 2% catalyst XG-866B-1 or fast dry catalyst XG-866B-2 ,then 5-10% thinner XG-128A(thinner is not necessary).Print 2-5 times dry after printing every time by 120 degree 。
5.Mid layer printing :Crossing linker XG-360Z-1 to mix with 10% catalyst XG-360ZB for 2-3 times flash temp 100-120 degree .
6.Hot melt glue XG-360R printing for 3-4 times, should get the glue printing layer surface dry every time by room temp. Put into the oven to bake by 120 degree for 20-30 minutes after finish.
7.Press the heat transfer press machine by the temp of 150 degree for 15-20 seconds with pressure of 4KG.
For more details kindly contact with Belinda Liu
Cell phone & whatsapp :008615899645234/ 008618319607489 Email address:ceo@xgsilicon.com
Xinguang Silicone ink -Machine printing silicone
My whatsapp and wechat:008615899645234
The paper products printing label?
Yeah, after logos finish ,then heat press on fabirc.
Do this type of transfer films work on leather?
Need to know which type of leather and do the test .
@@xgsilicone-printingsiliconeinkits happens to be ostrich leather
@@xEcchiCl Need your leather to do the test to check if fastness good enough.
Do you only sell inks or do you also print silicone ink transfers? I am looking for a source to buy printed 3D silicone heat applied transfers.
Hi Andrew,my friends make silicone transfer stickers ,would you add my whatsapp &wechat:008615899645234
Xinguang Silicone ink -Machine printing silicone where are you located...
Hi Kiko, We are located in Guangdong province Huizhou city,near Shenzhen,Donguan and Guangzhou. My whatsapp:008615899645234
@@xgsilicone-printingsiliconeink 6199318285 whatsapp
Would yo say HI to my whatsapp 008615899645234 or may email address :ceo@xgsilicon.com ,here we can not use whatsapp without VPN.
what paper that use?
Special coated PET film for silicone heat transfer
Can i use this plastic film to transfer the image to the Skateboard by using heat press
I think you have to use different transfer ink and transfer film.
What is it
@@keimasvlog2895 May I have your email address, I will get my friend who make transfer inks and materials to contact with you . we produce silicone ink and transfer silicone ink only .
@@xgsilicone-printingsiliconeink please check my video for you to understand what is
Do you do fulfill personal orders?
We produce and sell silicone ink if you are interested in silicone ink or silicone transfers? screenprintingsilicone.com/ for silicone ink TDS and information kindly refer to my blog:screenprintingsilicone.com/
I can
Yes I can
distribucion para ecuador y asesoria?
Which country are you from?
Como faço pra fazer um pedido ?
E como fica o envio para o Brasil?
depends on your quantity to see if by courier or by sea. My email: ceo@xgsilicon.com whatsapp+86 15899645234
What is waterbase in in made
this silicone ink oil based
Hi msm
Hi Royal,for more silicone transfer information kindly refer to my blog:screenprintingsilicone.com/category/silicone-for-transfer-printing/
me podria ayudar con informacion del producto saludos,,
May email address: ceo@xgsilicon.com whatsapp:008615899645234 May I have your email address to send you product information?
@@xgsilicone-printingsiliconeink jcalderon13@hotmail.com
@@13jcalderon Kindly check email, already email you TDS and catalgoue .For more silicone ink TDS and printing videos kindly follow my blog:screenprintingsilicone.com/
This Video is approved by Adidas^^
This for ink test, for more information my whatsapp +86 15899645234 Email:ceo@xgsilicon.com
Yeh macheen ketne ka price
We produce transfer printing silicone ink ,do not make machine,thanks!
Hi
Hi,for more silicone ink information www.xgsilicone.com .Email:ceo@xgsilion.com
Do you send brazil são paulo?
Yes,we can . My email:ceo@xgsilicon.com +86 15899645234 whatsapp
How to communicate u mam
+86 15899645234 whatsapp