XG silicone for heat transfer by hot melt powder

XG silicone for heat transfer logo making process by hotmelt powder . For more information : [e-mail] Wechat and whatsapp:[phone]
TDS Of Xinguang Transfer Silicone Ink by hot melt powder
Silicone ink PET films:
Two types : one is glossy coating film which will be glossy after heating press on fabric ,another one is matte finish effect after heating press on fabric.
Mesh number： 120-200 , Mesh(screen film )thickness 0.1-0.2MM,it is depends on printing Artworks.
Squeegee：65-80 degree .
Printing tips:
1.Silicone ink color layer printing for 3-4 layers :
Silicone ink XG-866A-2Y 100G
Pigments or special powders 10-20G (10-20% white&fluorescent 15-20% other colors 10%)
Catalyst XG-866B-2 2G 2%
Thinner XG-128AH 10-20G 10-20%
Flash by 100 to120 degree.
2.Silicone ink clear layer printing 2 -4 layers if needed for high density stickers,if need more high density then print more times clear.
Silicone ink XG-866A-2Y 100G
Catalyst XG-866B-2 2G 2%
Thinner XG-128AH 10-20G 10-20%
Flash by 100 to120 degree.
3. Transparent silicone with catalyst and adhesion agent with harder layer printing:
1). Silicone ink XG-866A-2Y 100G
Catalyst XG-866B-2 1- 2G 1- 2%
2).Bonding agent A XG-180A 50G
Bonding agent B XG-180B 5G 10%
Mixing together for printing :Bonding agent AB according to silicone is 50%. Bonding agent B is harder can get silicone ink dry, so if need longer printing time then get silicone catalyst mixing ratio 1% or no need silicone catalyst.
Printing wet on wet for 2 times， keep 100% wet can not heat:
4.Spill hot melt powder on wet silicone and adhesion agent layer immediately.
5. After finish, to put into the oven to bake by 100-120 degree for about 10 minutes,if bake higher temp then less time,once hot melt powder 100% melt then it is ok.
6.Press the stick on the heat transfer press machine by the temp of 160-170 degree for 10-16 seconds with pressure of 4KG.
TIPS:Kindly doing test before the bulk goods printing every time.

[@sureshkumar-dt8er]

After heat press, hot melt powder sticky around silicone print sides.please give solution.

[@xgsilicone-printingsiliconeink]

to use glue to make tranfser stickers will get better effect.

[@shahabuddinrumi187]

I saw this like this which paper you prient and you give ready ink or we mixed this

[@xgsilicone-printingsiliconeink]

You mix before printing.Kindly refer to my blog:screenprintingsilicone.com/silicone-transfer-by-hotmelt-powder/

[@MohdFaizan-wj5si]

Bhai muja be ya mal chahiya plzz batao kha mela ga ya mera no hai 9811081049

[@caknelson2254]

Do you take orders to print art and mail the silicone transfers? I would like to order silicone prints if available

[@xgsilicone-printingsiliconeink]

We produce silicone ink,do not do screen printing and do not make transfer stickers. screenprintingsilicone.com/

[@FIGHT101TV]

Is that plastisol ink?

[@xgsilicone-printingsiliconeink]

This is silicone ink. ,www.xgsilicone.com

[@ddiddi8361]

do you take orders from overseas..?

[@xgsilicone-printingsiliconeink]

Yes. we produce and supply materials for silicone transfer only not stickers.

[@ottora1241]

what is the powder use?

[@xgsilicone-printingsiliconeink]

This hotmelt powder used for transfer printing, after melt can get stickers heat press on fabric.