The Chad absolutely spanked every one of those shots at the bottom. Good lord. And everything coming off the pattern on short just screams, looks impressive
Its more so the surface on the ball. It looks Lane shined. And the finger holes are close together. Its easier to get revs the closer your middle and ring fingers are together you get better lift. It looks lane shined 5500+ grit You can have 500 rev rate if you got too much surface your not gonna see any back end motion. If you have low rpm's Just get a low rg ball with polish like the Physics and get that same back end snap with 170 rpms ;D
Looks a little over 400rpm. If you slow it down and count the amount of revolutions over a interval, its pretty easy to find out. 7 revs in 1 second (Before the ball hooked) with some error would be 400-420rpm.
@@MrPottsTeaching so believe it or not. this is what storm is calling a pearl coverstock for the omega. yes im aware its not a normal pearl with super shine but it is a pearl coverstock variant.
@@ernestojanniere76 I was joking about someone actually throwing a pin down there. At first watch it definitely looks odd, but after watching it several times you can see what happens
@@cmclean300 oh I see... Well it was a great video... Is there a chance that you throw that same ball up the boards since the Core is in a stable position so we can see what it looks like playing a tighter line...the pin on pap basically
It's not technically possible to do. I'm not sure how they're coming up with that number. For the record, 0x?x? means the Pin is directly on your PAP. ?x?x0 means the MB is directly on your VAL, in line with the Pin. Both of those are fine and correcty, but the Pin is 6 3/4" away from the MB, so it's not possible to have it 7.5" away. If you drew an arc 7.5" from the MB it would never hit the pin, so a 0" arc around the pin would never intersect it. Unless they're stating they mis-marked the MB or that their MB measurement was .75" off of 90 degrees. Maybe a core issue, or they're measuring the MB on a determinator after the ball was drilled and it moved .75 inches due to hitting the core? In Dual Angle, that would be 0x0x0. Pin on PAP, MB in line with the Pin on the VAL.
Actually, if you look in the picture, the MB marking is left of the thumb hole, which... really doesn't make sense. That means by their system, you can put the MB literally anywhere, and they believe that if the Pin to Pap is zero, that it won't matter in the VLS system. I'd love to hear storm chime in on this, because it would seemingly create a rather large shortcoming in their layout system if they feel that way. Based on the picture, the Dual Angle Layout would actually be closer to 90x0x0
Kenny Grinols that’s what I was thinking and I even tried using conversion spreadsheets that result excel function errors basically implying everything you mentioned. This layout almost looks like a 3/4in pin to pap with 100 drilling angle and 60 Val.
@@KennyGrinols 6.75" is a PSA reference point for MOST asymmetric balls. But that value is highly dependent on the core shape and its mass properties. Measure a Crux ball next time you have a chance - it'll be 7.5". Promise.
Minority's burden. Woe to thee, thou's deprivation with lack of presentation shall soon cease. Many beginning to fill the void. There's room for a viewer such as you.
Thats tha same rev rate and motion of 2 hands. If it back ends too fast. Add surface to reduce tha backend motion till its to your liking. But you will be okay with some RAG polish from a rag AND or Lane shine. I throw 2 hands. I get that reaction and rev rate. So this is a great comparison video for me.
This was a great video to see the different reactions with the layouts. Its nice to see a ball not strike every time.
This is one of the best teaching tools on the internet for layouts vs. ball motion. Amazing.
Great video!!! I really like the comparisons from the three different drillings and the reaction on the multiple patterns!! Thanks load Chad!!
The Chad absolutely spanked every one of those shots at the bottom. Good lord. And everything coming off the pattern on short just screams, looks impressive
Really liked seeing the reaction with different layouts.
Probably one the best videos guys!! Great job!!
Getting mine drilled on Saturday!
Just pick mine up today
Awesome video! Already have both balls preordered and waiting! Will you be doing a pitch purple layout comparison??
Great video and song is kinda dope too ..Chad can bang on it ..straight wheelin it
I got a PhysiX getting delivered today! Adding that to my two hand arsenal with the Crux Prime and a Black Widow Blk/Gold with a Spare Ball too!!
I guess the first was supposed to be like a Urethane reaction with some flare? That was sure an odd layout
What is his rev rate? the ball is spining so fast!
Its more so the surface on the ball. It looks Lane shined. And the finger holes are close together. Its easier to get revs the closer your middle and ring fingers are together you get better lift. It looks lane shined 5500+ grit
You can have 500 rev rate if you got too much surface your not gonna see any back end motion. If you have low rpm's Just get a low rg ball with polish like the Physics and get that same back end snap with 170 rpms ;D
Looks a little over 400rpm. If you slow it down and count the amount of revolutions over a interval, its pretty easy to find out. 7 revs in 1 second (Before the ball hooked) with some error would be 400-420rpm.
Travis D 480 +/-
@@MrPottsTeaching so believe it or not. this is what storm is calling a pearl coverstock for the omega. yes im aware its not a normal pearl with super shine but it is a pearl coverstock variant.
Great video.
Nice video.. very informative!
*Rule of Thumb:* Friends don't let friends drill the 0 x 7.5 x 0 layout LOL!
What do you recommend for a 2handed bowler?
I’ve got no idea what any of this stuff means but the 5x4x3 sure looked mean as hell lol
Did anyone else see the strike @1:25 where someone threw a pin at the 10pin?
lowshay That was definitely a weird one! I noticed that too 🙏
LOL THROW? WATCH AGAIN MY FRIEND!!!
Had to go frame by frame but the 3 pin ricochets off of the ball and pit curtain to take out the ten pin.
@@Kmeadows09 BINGO!!!
@@ernestojanniere76 I was joking about someone actually throwing a pin down there. At first watch it definitely looks odd, but after watching it several times you can see what happens
Hi
What is the strongest Layout you play
Alex
So why didn't you play the mb @ 7.5 up the boards or tighter on the longer pattern so we could see the shape????
fliboimoney Because the biggest request has been to throw the same lines with different balls.
@@cmclean300 oh I see... Well it was a great video... Is there a chance that you throw that same ball up the boards since the Core is in a stable position so we can see what it looks like playing a tighter line...the pin on pap basically
What is 0 x 7.5 x 0 when converted to dual angle layout?
It's not technically possible to do. I'm not sure how they're coming up with that number.
For the record, 0x?x? means the Pin is directly on your PAP. ?x?x0 means the MB is directly on your VAL, in line with the Pin.
Both of those are fine and correcty, but the Pin is 6 3/4" away from the MB, so it's not possible to have it 7.5" away. If you drew an arc 7.5" from the MB it would never hit the pin, so a 0" arc around the pin would never intersect it. Unless they're stating they mis-marked the MB or that their MB measurement was .75" off of 90 degrees. Maybe a core issue, or they're measuring the MB on a determinator after the ball was drilled and it moved .75 inches due to hitting the core?
In Dual Angle, that would be 0x0x0. Pin on PAP, MB in line with the Pin on the VAL.
Actually, if you look in the picture, the MB marking is left of the thumb hole, which... really doesn't make sense. That means by their system, you can put the MB literally anywhere, and they believe that if the Pin to Pap is zero, that it won't matter in the VLS system. I'd love to hear storm chime in on this, because it would seemingly create a rather large shortcoming in their layout system if they feel that way.
Based on the picture, the Dual Angle Layout would actually be closer to 90x0x0
Kenny Grinols that’s what I was thinking and I even tried using conversion spreadsheets that result excel function errors basically implying everything you mentioned. This layout almost looks like a 3/4in pin to pap with 100 drilling angle and 60 Val.
@@KennyGrinols 6.75" is a PSA reference point for MOST asymmetric balls. But that value is highly dependent on the core shape and its mass properties. Measure a Crux ball next time you have a chance - it'll be 7.5". Promise.
@@supermantl34 Luckily, the ball didn't give me any errors when I laid it out/rolled it ;)
こうも連続でストライクを見せられるとこっちまで気持ちよくなっちゃう
Lol whos the guy with 9000 revs?
Joe Piccoli 👋
You gotta show it 2 handed as well because I bowl with 2 hands
Minority's burden.
Woe to thee, thou's deprivation with lack of presentation shall soon cease. Many beginning to fill the void. There's room for a viewer such as you.
Thats tha same rev rate and motion of 2 hands. If it back ends too fast. Add surface to reduce tha backend motion till its to your liking. But you will be okay with some RAG polish from a rag AND or Lane shine. I throw 2 hands. I get that reaction and rev rate. So this is a great comparison video for me.
🤦🏼♂️
Sam Miller just cuz u 2 hands doesnt mean they have to take a whole afternoon to tend to your “needs”
Anthony DiOdoardo they don’t have to tend to my needs I just wanna see it be thrown 2 handed a few times
Great Video I love it yea yaya love godlike yea yaya; D
Who is this guy, with 800 revs??
Brandon Atwood 🤘
@@cmclean300 ahahha nice!!
My jaw dropped when I saw that the ball tester didn't strike
Simply 50 years ago .No hook no problem 🤣 0 x7,5x 0