Your thoughts on this OpenTX GPS telemetry logging widget and GPS Log Viewer? Gonna be using it? If so, remember to thank moschotto at his github site here github.com/moschotto and check out more good stuff on my site at tmacfpv.com/ ! 'Till next time, fly fearlessly friend! 😎
But which of the numbers do U use from the lines shown starting from 8.. all of the digits you enter into Google maps? As it doesn't seem to work in my case?
I made a comment a month ago. Since then I have installed and tested the system intensively. IT SIMPLY WORKS!!! Thanks you Moschotto for a neat logging app. and to you TMac for bringing it to our attention. Great Job!
This video just saved my drone yesterday. I can't thank you enough. Being able to find my rouge drone in the middle of the bush with a disconnected battery would have been impossible without your help, we even walked past it twice trying to use Google maps to realise it was to the mm on google maps.
Thanks TMac: I watched your Video did the 3 easy steps and bench tested it and it worked Great, OH did i mention it worked on my Horus X10S and my Jumper T16 so Thank you again.
Hi I bought Roma l5 and it come with GPS and my remote and goggles are DJI so how can I find drone after crash , because after crash no information on OSD usually please help me
This is a great tip. I will be installing a GPS on my 5" and this will be very handy.. Thanks to you for the video showing how and thanks to moschotto for the widget itself. Double thumbs up from me
done this on my TX16S but although i get the screen come up once connected to the quad i get no readings....i am using a crossfire module with a nano rx would this be the reason....does this work with crossfire
Installed this on my TX16s but unsure how to reset telemetry after good GPS coordinates found, as moschotto says to do, anybody help? Unless I reboot transmitter a few times the home position is wrong
Tango 2 version is ready - check the repository. Not tested by myself. Please feedback on GitHub if you encounter problems... BTW: does anyone facing issues with a T16 "emergency mode" after setup or turning off/on the radio? I don't own a T16 so i can't test it....
@@TMacFPV i having issues with emergency mode appearing on tx16s, when i setup widgets sometimes it goes to "emergency mode".. Can someone relate to this?
hello, now i don't use this widget. I just entered gps coordinates. On the radio the coordinates are not accurate. In viewers and also on betaflight they are accurate. How can I fix? Can you help me please?
I keep a pen and paper handy, write down the coordinates from my goggles dispaly if the stupid thing goes down. it isn't much use though, the forest is so thick can't get a GPS signal on the phone to go look for it in the bush.
Is this possible with edge tx? Also is the tx16 the only radiomaster capable of this? I’m having a hard time finding much good info about it so thank you very much!
many thanks for the video, it's exactly what i was looking for! however following step by step the guide i get "no gps data available", tried with xfire and elrs, in 2 different build i get the same message, can you help troubleshooting? thanks!!
Things to check: 1. got a GPS lock with your GPS module?, 2. Telemetry enabled in Betaflight?, 3. Discover New Sensors on Telemetry Page of transmitter?, 4. "Ignore Instances" box on Telemetry Page of transmitter UNCHECKED?
@@TMacFPV thanks for your help, it's really appreciated!! i've done the same on 2 planes and 3 quad and only in 1 plane and 1 quad it's working and i'm able to get betaflight telemetry! not sure what to check because the setup is exactly the same! i get the crossfire telemetry like rssi and dbm readings but not the betaflight (so no flight mode, current, voltage and GPS info!). any clue on what to check? :(
Great video. Maybe for beginners like me (if you have time) you could show how to set it up on a Taranus (mine is the x9d+ 2019). I have version 2.3.9. I copied the files (I used GPSviewerX9.lua, not GPSviewerX9e) to my radio but am confused on how to see the display. Thanks! I love your channel.
Hey Dale, thanks! I think you might just be stuck on how to display telemetry pages. Did you also install the Icon folder and setup a telemetry screen (page 13/13) per instructions on github site? Install Taranis models: copy GPSxxx.lua to /SCRIPTS/TELEMETRY copy GPSviewerxxx.lua to /SCRIPTS/TOOLS copy the ICON folder to /SCRIPTS/TELEMETRY/BMP Setup a "screen (DIsplay 13/13)" and select GPSxxx.lua Also, here's a video from "JC" ( who is sadly no longer with us) that may help you out: ua-cam.com/video/x14DyvOU0Vc/v-deo.html
@@TMacFPV Wow, thank TMac! I unknowingly had it all set up correctly, I just didn't know how to get to the telemetry page. I watched JC's video and it became clear. When I went to my telemetry page it was all there. Thanks so much!
Last known location may not be good enough. I lost my drone power on a windy day at about 300ft high. I have the location for where that happened but I'm not able to find it in the thick brush. I think a ruko r111 is a better bet as a finder, in combination with what you are showing here.
@@TMacFPV thanks for sharing your knowledge, thanks to youtube and the translator i get to know and learn new things ... congratulations on the channel!
Thanks for the video Just a quick note, I thought this wasn't working and I realized that I didn't have telemetry enabled in betaflight. Remember to switch it on or this widget won't work.
Your thoughts on this OpenTX GPS telemetry logging widget and GPS Log Viewer? Gonna be using it? If so, remember to thank moschotto at his github site here github.com/moschotto and check out more good stuff on my site at tmacfpv.com/ ! 'Till next time, fly fearlessly friend! 😎
This is great downed model rescue tool. I will definitely implement it in all my GPS models.
i just got it on my tx16s. im excited to see if i can use it with my crossfire module
But which of the numbers do U use from the lines shown starting from 8.. all of the digits you enter into Google maps? As it doesn't seem to work in my case?
👍 Thanks TMac for publicizing this great piece of programming by Moscho. An essential addition for any adventurous quad pilot.😊
I made a comment a month ago. Since then I have installed and tested the system intensively. IT SIMPLY WORKS!!! Thanks you Moschotto for a neat logging app. and to you TMac for bringing it to our attention. Great Job!
I appreciate you making the time to provide us all with your success story🙏I agree, this app works great. I'm using it all the time👍
This channel is so underrated. So good cracking content!!
This video just saved my drone yesterday. I can't thank you enough. Being able to find my rouge drone in the middle of the bush with a disconnected battery would have been impossible without your help, we even walked past it twice trying to use Google maps to realise it was to the mm on google maps.
Very cool Rooey! Happy you found it! This little widget has saved mine "a few" times too!😂 Thanks for sharing your story👍
Thanks Tmac and Moschotto, amazing way to have more info on our radio, easy to use. Now I need to buy GPS for my other drone. 👍
Brilliant - been looking for something like this for a while. Many thanks, and also to Moschotto for the excellent dev work.
you're very welcome John and yes, thank you moschotto!👏
Thanks again for some great info. Just did this on both of my GPS quads and it worked perfectly.
Absolutely Bryan! Got it on mine as well👍
Thanks TMac: I watched your Video did the 3 easy steps and bench tested it and it worked Great, OH did i mention it worked on my Horus X10S and my Jumper T16 so Thank you again.
Once again another useful head up and tutorial, thanks This looks like a must have for my 5inch. Do you know if it will work with EdgeTX?
Yes, it does!
Is there no sim-card-based gps tracker, like for cats&dogs is used with its own battery ? I'd like to add that to my drone.
So when i try to access the gps telemetry lua in the tools it says log file doesnt exit. Where do i create the log file
Hi I bought Roma l5 and it come with GPS and my remote and goggles are DJI so how can I find drone after crash , because after crash no information on OSD usually please help me
Could you use this widget on a tx12?
This is a great tip. I will be installing a GPS on my 5" and this will be very handy.. Thanks to you for the video showing how and thanks to moschotto for the widget itself. Double thumbs up from me
done this on my TX16S but although i get the screen come up once connected to the quad i get no readings....i am using a crossfire module with a nano rx would this be the reason....does this work with crossfire
ok, now THIS is AWESOME!! now i can clean up my OSD on my goggles and just get to flying! thank you!!
Yeeesss! Time to rip!🤩
Installed this on my TX16s but unsure how to reset telemetry after good GPS coordinates found, as moschotto says to do, anybody help? Unless I reboot transmitter a few times the home position is wrong
Great video TMac as always I’ll definitely install this and thank moschotto for it too. 👍🏻
Thanks TreeSurfer_FPV! I find it useful, simple, and works great👍
Thanks, great info as always. I will for sure be using it.
Is there a version that works on edgeTX?
does it work on radiomaster tx12? how to use it to find lost drone? hug from Brazil.
Good afternoon, great and very necessary thing, but my TX16S equipment works on EdgeTX, will it work on EdgeTX?
Yes, it does👍
Tango 2 version is ready - check the repository. Not tested by myself. Please feedback on GitHub if you encounter problems...
BTW:
does anyone facing issues with a T16 "emergency mode" after setup or turning off/on the radio? I don't own a T16 so i can't test it....
Great stuff Mosch, thanks! I've had no "Emergency Mode" issues to date using it with my TX16S
@@TMacFPV i having issues with emergency mode appearing on tx16s, when i setup widgets sometimes it goes to "emergency mode".. Can someone relate to this?
Installed great TMac, when it stops raining here I will give it a go outside. Thanks for the hard work.
Perfect! Keep your quad dry!😀
@@TMacFPV Will do. I hope to be installing and trying out some 1303 FPV Cycle motors on my Tadpole 3 this weekend weather permitting.
@@trajanfpv oooh, nice! Let me know how they work for you
@@TMacFPV Will do. Will post a video as well (warning super basic video, but a video none the less).
hello, now i don't use this widget. I just entered gps coordinates. On the radio the coordinates are not accurate. In viewers and also on betaflight they are accurate. How can I fix? Can you help me please?
This only work with beta flight telemetry ?
does it work for edgetx?
Really useful information. Thanks!
Nice work TMAc. Very cool little widget.
Thank you billadams8!
Really good video on a very useful script and its setup. Don't have any GPS quads yet but will be using this in the future, thanks.
sure thing Johnny J!
Oh yeah! That's awesome. Back to school time!
😂
Hi TMac, so for the Radiomaster tx16s we can use the Jumper T16 version of GPS_Telemetry-main since both radios have screens 480x272, right?
Yes, correct! 👍
I keep a pen and paper handy, write down the coordinates from my goggles dispaly if the stupid thing goes down. it isn't much use though, the forest is so thick can't get a GPS signal on the phone to go look for it in the bush.
heyo, can you help with taranis x9d plus ?
That question was answered up the list further.
Hi, TMac. I don't have the GPS Log Viewer in my RadioMaster TX16S. Do I need to do some upgrade to have it? Thanks, friend
Silvio, you didn't watch the video. Time mark 4:08
Sorry. It was my fault. I should watch it till the end. My bad
Done. Thanks, Tmac
@@SILVIOFRANCO1 sure thing Silvio!👍Happy it worked for you 😀
Thanks to Moschoto too. Awesome
Does this work with edge tx?
yes. Referenced in this short video ua-cam.com/video/3uNYTq7ZAFE/v-deo.htmlfeature=shared
Is this possible with edge tx? Also is the tx16 the only radiomaster capable of this? I’m having a hard time finding much good info about it so thank you very much!
ua-cam.com/video/3uNYTq7ZAFE/v-deo.htmlfeature=shared. Happy New Year!
@@TMacFPV how did you know that I have a zorro?!? Haha 😂 Thank you so much this is exactly what I’ve been looking for! Going to set it up now.
@@StoneFPV- 🧙♂️🪄
@@TMacFPV quick question while I’ve got ya here- In radio setup do I want my gps coords on DMS or NMEA?
How do I do this on the tango 2
Not sure. Check out the site mentioned in the video github.com/moschotto/OpenTX_GPS_Telemetry
many thanks for the video, it's exactly what i was looking for! however following step by step the guide i get "no gps data available", tried with xfire and elrs, in 2 different build i get the same message, can you help troubleshooting? thanks!!
Things to check: 1. got a GPS lock with your GPS module?, 2. Telemetry enabled in Betaflight?, 3. Discover New Sensors on Telemetry Page of transmitter?, 4. "Ignore Instances" box on Telemetry Page of transmitter UNCHECKED?
@@TMacFPV thanks for your help, it's really appreciated!! i've done the same on 2 planes and 3 quad and only in 1 plane and 1 quad it's working and i'm able to get betaflight telemetry! not sure what to check because the setup is exactly the same! i get the crossfire telemetry like rssi and dbm readings but not the betaflight (so no flight mode, current, voltage and GPS info!). any clue on what to check? :(
Great video as usual. !!
Thanks Guillermo! Gonna use it?🤔
great vid :) does the widget work in edge Tx?
ua-cam.com/video/3uNYTq7ZAFE/v-deo.htmlfeature=shared
Just installed - super easy! Thanks TMaC
Great GMANN FPV! You're very welcome!
Thank you Sir! For your channels tips and tricks..
Sure thing Switch FPV! Fly fearlessly friend 👍😁
I have a tango 2 so no idea if i'll ever be able to do this 😔 i have friends with this radio thought so will share. Great video!
Thanks EssexRC, much appreciated!👍
Tango 2 version now available on Mosch github site. He has not tested it himself and is asking for feedback
Wish there was a way to get it to read out in miles
Will this work after you’ve lost your drone?
Thank you great job
You're quite welcome Sarantis!
Very interesting video. Thanks TMac👍
Sure thing Luis, enjoy!😀
thx that was much appreciated, i really wanted something like that.
Thanks fabyt68, happy to help out!😀
Great video I got one kwad with GPS so im going to do that because I don't want to lose my kwad thank u Tmac.
Sounds good H2O,-FPV👍
Great video. Maybe for beginners like me (if you have time) you could show how to set it up on a Taranus (mine is the x9d+ 2019). I have version 2.3.9. I copied the files (I used GPSviewerX9.lua, not GPSviewerX9e) to my radio but am confused on how to see the display. Thanks! I love your channel.
Hey Dale, thanks! I think you might just be stuck on how to display telemetry pages. Did you also install the Icon folder and setup a telemetry screen (page 13/13) per instructions on github site?
Install Taranis models:
copy GPSxxx.lua to /SCRIPTS/TELEMETRY
copy GPSviewerxxx.lua to /SCRIPTS/TOOLS
copy the ICON folder to /SCRIPTS/TELEMETRY/BMP
Setup a "screen (DIsplay 13/13)" and select GPSxxx.lua
Also, here's a video from "JC" ( who is sadly no longer with us) that may help you out: ua-cam.com/video/x14DyvOU0Vc/v-deo.html
@@TMacFPV Wow, thank TMac! I unknowingly had it all set up correctly, I just didn't know how to get to the telemetry page. I watched JC's video and it became clear. When I went to my telemetry page it was all there. Thanks so much!
@@dale7431 Perfect Dale! Very happy for you!😁
If only I could've seen this couple days ago..
Oh no😳
Last known location may not be good enough. I lost my drone power on a windy day at about 300ft high. I have the location for where that happened but I'm not able to find it in the thick brush. I think a ruko r111 is a better bet as a finder, in combination with what you are showing here.
Who's making the Tango2 version of this!!
good job !!!
Thanks Marcos!
@@TMacFPV thanks for sharing your knowledge, thanks to youtube and the translator i get to know and learn new things ... congratulations on the channel!
@@093dourado My pleasure Marcos and thank you! That's one of the things I enjoy about content creation is my conversations with people worldwide!
Thanks for the video
Just a quick note, I thought this wasn't working and I realized that I didn't have telemetry enabled in betaflight. Remember to switch it on or this widget won't work.
Nicee sir tmac
Does anyone else think he sounds like Obama?