I have this on my Bee35. Loads of fun. The guidance setting is actually useful too. It shows me the orientation of the quad at distance when flying line of sight. Thanks for another interesting, informative, and entertaining video. Happy flying amigo. 🍻
Thank you very much my friend , and yeah indeed, the guiding one is really usefull, I didn't even think about it, thank you! it is very usefull if you are flying without the goggles since you can see exactly where the drone is going, I get very confused if I fly without the goggles 🤣.happy flying my friend 😊
Another nice feature that I found out by chance when I mounted the Meteor on my BetaFPV Pavo20 is (because there is already a plug with +/- and a third line on a TX pad by default and configured PinIO function), if you solder that yellow cable which is soldered to the Meteor chip on the boot pad by default, e.g. solder to an RX or TX pad on the FC and then operate the whole thing using PinIO via a button on the remote control, then you can also switch through the different lighting modes without pressing the hardware button on the chip or changing it via the app.. like that You can also change the modes during the flight... or if you hold down the button on the remote control for a few moments you can also switch it on and off! ;-) I already wrote this to Speedybee and they didn't even know about this feature! ;-) I did a short video about that for explaning... ua-cam.com/users/shortsWxkJLchBgBQ?si=SGDUKVPfFi9jZrFd
wooow, this is really clever indeed, good job man! I didn't think of this and it is really clever to change the mode from the RC like this! It makes sense yeah but I have no idea how did you think about this 😅👏👌
just found your chanell and im binge watch it (im new in FPV)your studio is a work of art ,perfection ,are you German or what .Such precision and eloquence .Subscribed of course PS i just purchased a pair of HDZero googles and all what i need to build a drone ,if you would make such video with the HD zero sys that would be fantastic also Beta set up .Thank you .
😅 I am not German but I live in Germany, does this count ? 🤣🤣🤣 Thank you very much for your kind words and appreciation! I am very happy that you like my work and you find it helpful 😊! Actually just yesterday I ordered the HDzero nanno lite kit and I am laning to build a tiny whoop , something between 65 and 75, an not sure yet ! What did you buy? a small drone or a freestyle setup? Thanks again and if you need help let me know, we can tak more in instagram since it is easier there 💪
Nice but is vary bad thing because don’t have plug, you must to remove the parts of the whole board and to solder, in that case you can accidentally break something because it is very small and requires great caution, that thing only makes me nervous that I would have to do all that and lose two hours just because of it, and you can also see me exactly where the wires should be soldered in the video, because it's all very easy for you and then you think that it's also easy for me, but I, for example, have never touched anything related to drones and soldered before, so it would be It's very difficult for me, I know how to solder, but I would be afraid to solder something next to it and make a connection and accidentally burn something. So I would have to ask you in detail to show me exactly where the other wire should be soldered because I can't see precisely here, to be honest
Hello my friend. I understand very well what you are saying and it can be frustrating to solder! but you can solder it to the positive(BAT) and negative pads only and use it only as a light strip, that way you can use the strip without the DFU mode capabilities! we can talk on Instagram and I can help you configure yours : bilu.media!
I am not sure about the F405 v3, please send a mail to speedybee, they will reply very fast, if you still can’t figure it out, get back to me, i will try to help you!
ps anyone that promotes speedybee - well end of story lol...almost killed myself over their cheap gear that breaks and you loose crap and then most come DOA.. speedybee is pure crap...feel free to delete all my posts there is no reason to respond...sorry but as I said I got suicidal and more after losing multiple quads and they all had something in common...speedybee!
Hello again, it is really true what you are saying, i mean i believe you, but i didn’t have a single product from Speedybee to fail on me 🤷♂️. And this led strip is very good, there is nothing like it on the market right now! I had products from flywoo, foxeer and radiomaster to fail, this doesn’t mean they have bad products, even if some of them didn’t even replace my bad products! I am still buying from them because simply most of the products are very good, it is frustrating yeah if you are in the situation with bad product, but it is not a general thing! I am sorry for your issues in the past and i understand, but it is not the case with every single product from them…
I have this on my Bee35. Loads of fun. The guidance setting is actually useful too. It shows me the orientation of the quad at distance when flying line of sight. Thanks for another interesting, informative, and entertaining video. Happy flying amigo. 🍻
Thank you very much my friend , and yeah indeed, the guiding one is really usefull, I didn't even think about it, thank you! it is very usefull if you are flying without the goggles since you can see exactly where the drone is going, I get very confused if I fly without the goggles 🤣.happy flying my friend 😊
Another nice feature that I found out by chance when I mounted the Meteor on my BetaFPV Pavo20 is (because there is already a plug with +/- and a third line on a TX pad by default and configured PinIO function), if you solder that yellow cable which is soldered to the Meteor chip on the boot pad by default, e.g. solder to an RX or TX pad on the FC and then operate the whole thing using PinIO via a button on the remote control, then you can also switch through the different lighting modes without pressing the hardware button on the chip or changing it via the app.. like that You can also change the modes during the flight... or if you hold down the button on the remote control for a few moments you can also switch it on and off! ;-) I already wrote this to Speedybee and they didn't even know about this feature! ;-) I did a short video about that for explaning... ua-cam.com/users/shortsWxkJLchBgBQ?si=SGDUKVPfFi9jZrFd
wooow, this is really clever indeed, good job man! I didn't think of this and it is really clever to change the mode from the RC like this! It makes sense yeah but I have no idea how did you think about this 😅👏👌
Nice! I have this version in my cart. Looks awesome!
it is just wonderful yeah! it has a lot of possibilities and it just works flawlessly, I love it 😀! Enjoy 😊
just found your chanell and im binge watch it (im new in FPV)your studio is a work of art ,perfection ,are you German or what .Such precision and eloquence .Subscribed of course PS i just purchased a pair of HDZero googles and all what i need to build a drone ,if you would make such video with the HD zero sys that would be fantastic also Beta set up .Thank you .
😅 I am not German but I live in Germany, does this count ? 🤣🤣🤣 Thank you very much for your kind words and appreciation! I am very happy that you like my work and you find it helpful 😊! Actually just yesterday I ordered the HDzero nanno lite kit and I am laning to build a tiny whoop , something between 65 and 75, an not sure yet ! What did you buy? a small drone or a freestyle setup? Thanks again and if you need help let me know, we can tak more in instagram since it is easier there 💪
Nice but is vary bad thing because don’t have plug, you must to remove the parts of the whole board and to solder, in that case you can accidentally break something because it is very small and requires great caution, that thing only makes me nervous that I would have to do all that and lose two hours just because of it, and you can also see me exactly where the wires should be soldered in the video, because it's all very easy for you and then you think that it's also easy for me, but I, for example, have never touched anything related to drones and soldered before, so it would be It's very difficult for me, I know how to solder, but I would be afraid to solder something next to it and make a connection and accidentally burn something. So I would have to ask you in detail to show me exactly where the other wire should be soldered because I can't see precisely here, to be honest
Hello my friend. I understand very well what you are saying and it can be frustrating to solder! but you can solder it to the positive(BAT) and negative pads only and use it only as a light strip, that way you can use the strip without the DFU mode capabilities! we can talk on Instagram and I can help you configure yours : bilu.media!
nice how would i solder to a f405 v3? cant seem to find the boot pad
I am not sure about the F405 v3, please send a mail to speedybee, they will reply very fast, if you still can’t figure it out, get back to me, i will try to help you!
is possible reuse strip on another frame when replacing it?
@@curious-man of course it is possible, just maybe you need to replace the double sided sticky tape…
Dude you just soldering positive and negative ?what is the yellow cabe ?
Yellow is for the dfu boot mode
ps anyone that promotes speedybee - well end of story lol...almost killed myself over their cheap gear that breaks and you loose crap and then most come DOA..
speedybee is pure crap...feel free to delete all my posts there is no reason to respond...sorry but as I said I got suicidal and more after losing multiple quads and they all had something in common...speedybee!
Hello again, it is really true what you are saying, i mean i believe you, but i didn’t have a single product from Speedybee to fail on me 🤷♂️. And this led strip is very good, there is nothing like it on the market right now! I had products from flywoo, foxeer and radiomaster to fail, this doesn’t mean they have bad products, even if some of them didn’t even replace my bad products! I am still buying from them because simply most of the products are very good, it is frustrating yeah if you are in the situation with bad product, but it is not a general thing! I am sorry for your issues in the past and i understand, but it is not the case with every single product from them…