These are my settings that I ran RPCS3 with today 1st Jan 2024, latest emulator version. On my dual core Intel G6400, 2 core, 4 threads cpu (released in 2020). GTX 960 graphics. Game: Sleeping dogs. In the 2nd mission based on walking behind his friend . - With these settings: I got 12-18fps with a lot more responsiveness to controls, and i could actually play, for testing purposes. Also Rendered cut scenes are now 30-40fps, very good! I set program priority to Above Normal in task manager. ** Settings used ** CPU tab: - Preferred SPU Threads: 2 - Enable SPU Loop Detection: Disabled GPU tab: Shader Mode: - Async w/ Shader Interpreter - Number of Shader Compiler Threads: 2 Audio tab: - Audio Buffer Duration: 125 ms Emulator tab: - Max LLVM Compile Threads: 3 Advanced tab: - Maximum Number of SPURS Threads: 4 Next i may try your settings
SPU Loop Detection absolutely saves the game and as far as i can tell is the one setting that makes Skate 3 go from unplayable to playable as if you’re on the console…. BUT it completely ruins the audio and i can’t figure out how to fix that other than turning the setting off which makes it go back to running terribly
@@FairlyAverageYT Could be, I only tested both on my own rig so I would still recommend xenia over rpsc3. Though I enjoy both, xbox emulation is certainly easier and smoother than ps3 emulation. I would go for xenia for the games which are on both consoles.
@@XDtko it fixed itself when i got a new laptop with 16gb ram instead of 6 bro srry i think it was just 2 much for my old 1 to run correctly. imma do a vid on ikon story on my channel soon tho and show my settyings at start if u wanna sub and be on look out for it tho to see if it helps..
@@XDtko no prob and skate 3 and def jam ikon was ones i had choppy audio with till i got new laptop everything else i played was fine.. idk if that helps also
Thanks bro. My laptop for some reason cannot dissipate the heat when running AVX instructions, so the temperature used to hit up to 100°C in seconds just by unpausing the emulation. Disabled core boost, temperature is now about 60-70°C. Quite low. With core boost, temperature hit 100°C in seconds. With these settings, now I can enable core boost and temperature will stay around 90-95°C. Thanks
I have a shit GPU in my laptop but It can run dying light perfectly fine but on the PS3 Emulator I can't even play ratchet and clank properly just lags whole time
Your computer needs to go up to W10 and honest you should consider going for a much powerful processor. Very outdated quality for a video also i would recommend you use a better mic. You should consider using a condenser mic. Just my two cents right here.
thanks to this tutorial I managed to get the main menu to almost stable 60 fps
the game was still unplayable, but thanks for the effort at least
same
These are my settings that I ran RPCS3 with today 1st Jan 2024, latest emulator version.
On my dual core Intel G6400, 2 core, 4 threads cpu (released in 2020). GTX 960 graphics.
Game: Sleeping dogs.
In the 2nd mission based on walking behind his friend .
- With these settings: I got 12-18fps with a lot more responsiveness to controls, and i could actually play, for testing purposes. Also Rendered cut scenes are now 30-40fps, very good! I set program priority to Above Normal in task manager.
** Settings used **
CPU tab:
- Preferred SPU Threads: 2
- Enable SPU Loop Detection: Disabled
GPU tab:
Shader Mode:
- Async w/ Shader Interpreter
- Number of Shader Compiler Threads: 2
Audio tab:
- Audio Buffer Duration: 125 ms
Emulator tab:
- Max LLVM Compile Threads: 3
Advanced tab:
- Maximum Number of SPURS Threads: 4
Next i may try your settings
Do you have any recommendations for GTAV?
I just tried your setting, added frame limit on 30 frames and i was able to run dante inferno on my old i3 4370 and GeForce 950😢. Thanks!
I have lag problem and i do your settings it's fixed now bro. Thank u so much
SPU Loop Detection absolutely saves the game and as far as i can tell is the one setting that makes Skate 3 go from unplayable to playable as if you’re on the console…. BUT it completely ruins the audio and i can’t figure out how to fix that other than turning the setting off which makes it go back to running terribly
play the not exclusive games on xenia, better performance. xbox has a pc like architecture thus better performance.
@Al3cTh3L3afy emulator accuracy is getting better and better everyday you could run some games i guess. have fun
@@KaptanWintersTR Xenia is way more GPU dependent though, so players with a stronger CPU will benefit with RPCS3
@@FairlyAverageYT Could be, I only tested both on my own rig so I would still recommend xenia over rpsc3. Though I enjoy both, xbox emulation is certainly easier and smoother than ps3 emulation. I would go for xenia for the games which are on both consoles.
@@KaptanWintersTRfor me RPCS3 barely uses my GPU, most of the time my RTX 3050 (mobile) utilization are 8% while my CPU at 100%
Thank you so much please do a remake/update of this video for newer versions of rpcs3 please I’m sure it would be helpful after a few years
did you find a sollution
you goated asl 2023 still works!
thanks to this i was able to finally get my game to stop freezing/crashing on me thank you for making this
W video this actually fixed my problem
Thank you man you made Infamous 2 run like 5-10 fps more but it is still unplayable because of my bad pc
finally & thanks bro
Holy .. .this took my games from unplayable to 60fps thank you man!
Appreciate your time and effort on this tutorial!
Thank you brother🥰🥰
How long should shaders take to compile???
Do I know this guy somewhere? His voice is in a couple of other emulation tutorials I've seen in other channels
some games wouldnt even open now i can play them thanks.
Goated my man
U the homie rn i spent like 10 hrs today tryna figure this shih out and only.issue im still facing is audio slow mo demon chop lol
Yo, did you figure out how to fix that? My game audio is still choppy as well
@@XDtko it fixed itself when i got a new laptop with 16gb ram instead of 6 bro srry i think it was just 2 much for my old 1 to run correctly. imma do a vid on ikon story on my channel soon tho and show my settyings at start if u wanna sub and be on look out for it tho to see if it helps..
@@SHMOKEY501 alright thanks that's good to know
@@XDtko no prob and skate 3 and def jam ikon was ones i had choppy audio with till i got new laptop everything else i played was fine.. idk if that helps also
Thanks very much!
Thank you so much!
AYE BRO IS THE GOAT
Thanks bro. My laptop for some reason cannot dissipate the heat when running AVX instructions, so the temperature used to hit up to 100°C in seconds just by unpausing the emulation.
Disabled core boost, temperature is now about 60-70°C. Quite low.
With core boost, temperature hit 100°C in seconds. With these settings, now I can enable core boost and temperature will stay around 90-95°C. Thanks
Bro the boiling point of water is 100°C 😭
@@Jader324 laptop gaming sadly. acer nitros are even worse as far as I've seen. 😭
Dude actually kinda sounds like Super Mario.
this helped, but my audio stopped working, do you know why?
after this tutorial, Sonic Unleashed now runs at 12 FPS instead of 7
Idk what happened bro but it effected all my games and now all have gone slower and low fps idk what to do even the ones not running on rpsc
thank you so much!!!
I followed you finally my pc was broken 😢😢
driver wake up delay greyed out, please help
some games just freeze doing cutscenes must be bad rips.
isnt vulkan an AMD technology? open GL is Nvidia. still okay to use vulkan on nvidia?
ever figure out a definitive answer?
Yers, yes it is fine. Reccomended actually.@@itsgurt
Thank you
not working and still has lag for tekken 6
I tried this and my PC crashed, thanks!
😂😂
you need to get better at describing when you say here here here here i have to look at the video every second instead of following it with just audio
Yeah and i want to know what does those things mean like if i disable something i dont know
Nerd talk sometimes depending on the person could be incoherent 😅
My fps is terrible no matter what I do I can't get it sorted done everything in this video and still can't be sorted
i swear this guy has like 8 channels
still laggy im trying to play LittleBigPlanet 2, ugh why is this so hard to get fps
Depending on your version of little big planet. It may not be in the playable list.
wow, i have 1.50ghz, and 4gb memory (only 3.8 of it is useable)
4GB no 4000GB
@@JakubNyk don't bully me =(
and ur trying to emulate ps3 games on it? U need a way more stronger pc than that.
@@dinkymurphy5418 no shit
@@dinkymurphy5418 thankfully I did get a stronger one with 3.5 ghz, and 8gb memory
My lap I5 8th gen 1050gtx still low 25fps😢😢 in wwe 2k14
If anyone can let me know if this helps with rpcs3 on steam deck that would be awesome! I haven’t got one yet and I want one if it runs great
didn’t work for me
perfect skate 3 is now bugged asf and idk how to fix it
Ever heard of resetting your settings to the default?
I have a shit GPU in my laptop but It can run dying light perfectly fine but on the PS3 Emulator I can't even play ratchet and clank properly just lags whole time
❤❤❤❤❤
Gonzalez Kenneth Gonzalez Amy Lopez Thomas
I wish it actually worked
Not hit 60fs, gow 3 only 28-31 fps wtf...my laptop specs,..- i7 14700hx, rtx 4070 140w, 32gb ram, only cutscenes 60 fps🤦🤦🤦🤦, ???????????????
Games were only playable at 30fps on the entire ps3 console, to get 60 you need to modify the game
Your computer needs to go up to W10 and honest you should consider going for a much powerful processor. Very outdated quality for a video also i would recommend you use a better mic. You should consider using a condenser mic. Just my two cents right here.
Is 8 gb ram(7.89 of it being usable) gtx 1060 3 gb intel core i5 4570 good?
No, especially not for emulation.@@coconutgun325
he is on windows 10? it just seems like they are using a low res display
I dont a Nvidia i have amd
sonis twash
soni+
sonip
sopin
sopon
papper
GESUS FRAKIN' KRISTO, PLEASE WASTE ALL OF MY TIME