Gilera dna project, first start up attempt?, exhaust sound? electrics? 125cc, fix, repair, Part 2.
Вставка
- Опубліковано 5 вер 2024
- gilera dna build, let's build a more reliable dna for once. I'll start with an upgrade of carb to a newer model with a metal slide I'll drain and put in some top quality coolant and I'll give it its first start up in the next video.
Hi everyone, if this video helps you out at all or you just enjoy watching then please feel free to tip enough to get a hot drink or even a Pepsi max :). The channel does cost a few pounds to run so all tips would go towards continuing the vids and charity.
If anyone would like a motorcycle rescuer key ring send me £5 through PayPal and leave your name and address and I will get one to you.
if you would like a motorcycle rescuer t shirt they are £20 but please contact me to see what sizes are available.
thanks
paypal.me/moto...
gilera, Gilera, dna, DNA, 50cc, 49cc, 125cc, 180cc 172cc, 200cc, 250cc, 300cc, runner, sp, vx, vxr, fxr, carb swap, carb upgrade, carburettor swap, carburettor upgrade, jetting, coolant flush, fix, repair, build, barn find, how to fix a gilera.
Warren's bike is recovered, it needs a new lock set and an exhaust which is on order.
The dna is looking great in the next vid, it's up and running beautifully.
Currently waiting on a new speedo drive from Germany and I'll do bits and pieces of paint here and there but otherwise it's very close to being ready for the road.
Please like and subscribe
Been looking forward to this
Me too lol. Been working on it all day. Should see first test run this week.
Same nice watch before bed 😁
Upload was a touch late as the filming was actually done yesterday.
Got a quick test run coming soon
Great video
Yessssssssssssssss it runs mate keep up good work you should be so proud
It rides great George
so was that mr Barns, hello buddy,
hello Warren and was that our Rabjab in the back ground hello every body
So yes Daniel at first, John in the background, then me, John, Danny, Rabjab and Warren in the van, also Sultan was in the background for a minute or 2 as he was passing.
Warren 😁👏🏽
Lol. Thanks fir watching migz.
Evening mate, nice one lol. Hope he locks his bike up next time. 👍😁
Hes not a great listener if I'm being honest. He needs a new lock set and exhaust now which is on order.
Great video mate. Still finding it hard to believe you can make a dna reliable though 🤣
I know right. I think the better carb should go a long way towards this.
One of the biggest issues with the dna is that the fuel pump sits below the carb so has to be pumped up hill. This system is currently working well I believe. The last issue is that people used rubbish cooling fluid and I've put in great stuff, so I expect this to be more reliable then the original.
I've ordered a new speedo drive from Germany so that's a common fault aswell. The original part should last a while.
So all in all it should be a great bike. I'll clean the variator aswell and possibly buy slightly lighter rollers.
@@motorcyclerescuer superb! No doubt that will all make a huge difference
Did you ever get to check the valve clearances on this bike?
I'm trying to figure out a way to get under the rocker cover without separating the engine from the frame.
Yes your right that dropping the engine is the only way to do them. It's a right pain. You will have to separate a little. You may be able to keep it close and the wires attached
Managed to check and adjust valve clearances without dismounting the engine as of this evening, mainly involving taking off the fake tank/storage box, disconnecting the rear shocks and putting a jack under the frame/swingarm pivot point, lifting the middle of the bike with wheels still touching ground.
This made the top of the engine face more upright and I was able to remove the valve cover bolts with a ratchet handle and long 8mm socket. I think this would be very difficult for anyone with particularly large hands or wrists because the space is still quite limited.
Initially intake valves were way too tight, even on the 0.08mm feeler gauge it was quite grabby and tight. Exhaust valves weren't as bad but still way too tight. Engine runs smoother and less strained now that I adjusted them to 0.1 and 0.15mm respectively with the feeler gauges sliding smooth with a bit of resistance but no grabbing/binding is what i was really going for
Wow great work. Sounds like it was well worth doing.
I’m having trouble with my electrical starter , did you find the cause of the loose wire you was trying to fix to get it going ???
I can't remember if I'm being honest, you would have to watch the next couple of vids to determine that.
Normally if you have a bad starter it could be a bad battery, wiring, brake light switches as these are needed to start the bike, earthing or a bad starter itself. I would make sure the battery is fully charged first if I was you and check that the brake lights are working when you press the levers. Also try starting the bike with both brakes pulled in
If your looking to trade for it im down for that
What do you have?
What upgraded carb have you used?
It's the original I used in the end for the best results.