I'm going to start making my box based on this vid great vid btw my question is what kind of tape and cloths did you use and how did you secure the wood pegs for the sub ring? Thank you again?
caos619 wood ring I secured it with dowels and hot glue gun and then you can lay the fleece. After it hardens you can break off or remove the wooden supports for the ring as the fleece will Hold it when it’s hard.
Does it need to be certain temp for fiberglass to harden? Wanting to build custom enclosure in 99 Eclipse Spyder back seat area. Be in my garage is cold right now here.
I found this to be one of the best videos to build from scratch. Thank you. 1 question, when you are laying the cloth\mat, are you placing it first then applying the resin? It was hard to tell in the time lapse.
Aakash Kakkad thanks for the feed back be sure to subscribe and I usually apply some resin to the surface so the cloth would stick to it then once I apply the cloth I then Apply more resin
Packaging peanuts is a decent method. Build a cardboard box that is the right volume, fill it with packaging peanuts. Your new build would need to fit all those peanuts in it then.
![FIBERGLASS CUSTOM SUBWOOFER BOX MAZDA 3 - [PART 2]](http://i.ytimg.com/vi/9NGwYGRu-9Y/mqdefault.jpg)
![FIBERGLASS CUSTOM SUBWOOFER BOX MAZDA 3 - [PART 2]](/img/tr.png)
![FIBERGLASS CUSTOM SUBWOOFER BOX MAZDA 3 - [PART 4] FINAL](/img/n.gif)
I'm going to start making my box based on this vid great vid btw my question is what kind of tape and cloths did you use and how did you secure the wood pegs for the sub ring? Thank you again?
caos619 wood ring I secured it with dowels and hot glue gun and then you can lay the fleece. After it hardens you can break off or remove the wooden supports for the ring as the fleece will
Hold it when it’s hard.
caos619 good luck
Thank you!
And as far as the tape goes what kind was it?
caos619 any masking tape works I used cheap Walmart masking tape
For painting
Does it need to be certain temp for fiberglass to harden? Wanting to build custom enclosure in 99 Eclipse Spyder back seat area. Be in my garage is cold right now here.
Elle Shah better at hotter temp to dry but cold works too I did it in the winter and put a heater on it
Shocking that isn't going to get locked into place. The suspense is killing me.
I found this to be one of the best videos to build from scratch. Thank you. 1 question, when you are laying the cloth\mat, are you placing it first then applying the resin? It was hard to tell in the time lapse.
Aakash Kakkad thanks for the feed back be sure to subscribe and I usually apply some resin to the surface so the cloth would stick to it then once I apply the cloth I then Apply more resin
How much fiberglass did you use?
When you design such a Box, How do calculate your Volume?
Packaging peanuts is a decent method. Build a cardboard box that is the right volume, fill it with packaging peanuts. Your new build would need to fit all those peanuts in it then.
When I went to school my teacher taught us to do it with sand I've heard some guys even do it with water
Alright boys
The cloth is called fleece, but you can use speaker grill cloth too.
7:40 I can see tape on cardboard that says LATVIA EMS. How did you get that one? Did you order something from there? Btw, I'm from Latvia.
I think the fender flares on my car are from Latvia haha good eye ;-)
don't add so much hardener it won't dry so quickly
whats up neighbor we're in the same city bro
Haha nice didn’t know :-) thx for watching
Fleece,=)
there ya go :) that lol thanks