great work guys!!!! you both went into full detail with the install of parts.Many guys on here cant go into detail with the simplest things. Keep it going guys!!!!!
The only problem I had was the mount bracket on the bottom of the lancers don't line up so I had to remove the bracket from the block but I didn't really need it.
Hi so they don't sell this header no more I tried looking it up too and I can't find it anymore but u can always go with DC SPORT Headers shop.redline360.com/products/dc-sport-4-1-ceramic-headersmitsubishi-lancer-2-0l-2-4l-2008-2016-mhc4005?currency=USD&variant=39851285839952&Google%20Shopping&stkn=891961585efe&gad_source=1&gclid=Cj0KCQiAv8SsBhC7ARIsALIkVT0-JDZ9fpV5JNuOb5iYDekC1QbJzoyNWRkod4MJdbcpumTLFXGYSykaAkZuEALw_wcB
Or they have this one being sold at Walmart it's for the 2.4L only Stainless Steel Header Fitment For 2009-2014 Mitsubishi Lancer ES/GTS 2.4L 4B12 DOHC By OBX www.walmart.com/ip/1378300117
great work guys!!!! you both went into full detail with the install of parts.Many guys on here cant go into detail with the simplest things. Keep it going guys!!!!!
Nice Video!! keep up the videos my boy love seeing the Lancer/Evo Community come together 😎😎🔥🔥💯💯
proud owner of 3 Mitsubishi's, 2 Lancers & 1 EVO X
Thanks bro we appreciate the support
Sounds really good 👍 no rasp
If you guys have any video suggestions and you would like for us to do it just let us know on the comment section and we'll try our best to do it. 👍✌️
install evo x cams
Also sorry for the text messages that were in the video something might had happen when I was editing the video but it should still be readable 👍
Sick setup man I installed some aswell with a custom intake and full 2.5inch exhaust sounds nice.
Nice weather. Nice work. Very clean car 🚙 you are good bro too
Thanks bro so much for watching the video we appreciate it
The diffuser tho been looking for one ngl where did you get it?
It’s the evo x one right?
I got it as a gift but you can probably find it on ebay it's a universal diffuser
It's a universal diffuser
@@JJRevs you’re lucky yeah I couldn’t find it anywhere besides street aero 😭😭
What exhaust do you have on it I want to put headers on mine and I have a borals exhaust curious sound difference
I have a Greddy Axle Back with OBX Headers and that's pretty much it
Bro what’s your exhaust set up
Can I do my 17 se it look just like yours big tires poke out to
Not sure
Yes you sure can bud, but making it look like this one will make it unoriginal but if you put in your own style on it’s your own!
bro that spring loaded bolt was a b to take off
That was the easiest one out of all of them for US
@@JJRevs that's where I got stuck lmao, couldn't take it off with my ratchet, wrench, breaker bar, but an impact really helped lol
😂
Link to the intake?
Which intake is that ?
K&N Intake
www.knfilters.com/69-6544ts-performance-air-intake-system
Something tells me my header ain’t made as good
Why do u say that?
@@JJRevsdid you have to tune for rich / lean or did the afr sensor take care of that issue ?
I didn't have to do anything to it I just installed it so it's basically just bolt on
@@JJRevs I have a vid of mine on the channel. The flanges don’t line up.
The only problem I had was the mount bracket on the bottom of the lancers don't line up so I had to remove the bracket from the block but I didn't really need it.
Where’d you buy these at?
I got it off a guy on offerup but you can get them here
www.walmart.com/ip/Stainless-Steel-Header-Fitment-For-2008-to-2017-Mitsubishi-Lancer-DE-ES-GTS-2-0L-2010-2021-Outlander-ASX-2-0L-2-4L-DOHC-4B11-By-OBX/1722296929
Does it throw a check engine light?
It does not throw a code it drives normally but with more throttle response
What year is the car
2011
Hello guys I just put the same header I have the same leak how you fit it ?
I bought new exhaust gasket and made sure I evenly tighten them down plus I snugged them down a little extra to make sure there was no leak
is your gts boosted ?
No it's not boosted
For 4B11 ?
4B12
Link of the Headers pleaseee
I don't have a link to the header because I bought them on offerup but you can search up ( Lancer OBX Headers )
What rims are those?
XXR
💀👹
Could you please link the downpipe? I cannot seem to find it.
Hi so they don't sell this header no more I tried looking it up too and I can't find it anymore but u can always go with DC SPORT Headers
shop.redline360.com/products/dc-sport-4-1-ceramic-headersmitsubishi-lancer-2-0l-2-4l-2008-2016-mhc4005?currency=USD&variant=39851285839952&Google%20Shopping&stkn=891961585efe&gad_source=1&gclid=Cj0KCQiAv8SsBhC7ARIsALIkVT0-JDZ9fpV5JNuOb5iYDekC1QbJzoyNWRkod4MJdbcpumTLFXGYSykaAkZuEALw_wcB
Or they have this one being sold at Walmart it's for the 2.4L only
Stainless Steel Header Fitment For 2009-2014 Mitsubishi Lancer ES/GTS 2.4L 4B12 DOHC By OBX www.walmart.com/ip/1378300117
@@JJRevs One more thing, I thought downpipe were found in turbo only cars. Other than the headers what should I get for my 1.8 Lancer?
What do u have on the car right now
@@JJRevs I have suspension and a custom exhaust that starts from the cat converter