Drill chuck disassembly
Вставка
- Опубліковано 5 кві 2017
- I wondered what is inside. This drill chuck is sealed in non-demountable manner.
Model for Google Sketchup is available:
3dwarehouse.sketchup.com/mode...
Another detailed and commented video about this type of chuck you can see here:
• Disassembly of cheap d... - Наука та технологія
Excellent video. No speaking necessary and no distracting music. Thanks very much.
Very nice of You to sacrifice a chuck to show how it works. Great video , I really enjoyed it.
Thank You for the tip about the jaws assembly , in that , they are numbered. I can just see myself assembling and re-assembling a chuck ???× before realizing I should have marked them like you did.
You're a good man Mr. Pete , always greatful for your knowledge and a big Thank You , Sir.
Thank you for the detailed graphic images on the pc. It shows a great deal and effort you put into this video.
Thank you for your instructive Video , I had to pull a 1/2” chuck I am modifying to fit a jig I am making to sharpen drill bits , I was half way to disaster when I checked on you tube and found your clip . Luckily I have a lathe and was able to remove half the crimp and reduce the thickness of the remainder so I could force it out of the groove , now I can reassemble and re crimp the remaining portion Thank you again I would probably destroyed the chuck had I carried on .
Nice video - and quiet ;-). When the chuck of my Bosch drill got stuck, I was able to fix it by first flushing with silicon spray and next generously applying silicon grease. While doing this, the range of movement became bigger & bigger until it functioned as new.
Wow. Your photography was amazing. Always wondered why my drill chucks were troublesome. Thank you kindly.
Hi I have learned more from you saying "ZIP" than most of the videos that waffle on !!! Thanks from Down Under
Thanks for the tutorial. You just saved me having to replace my very stiff , slightly working three jaw chuck
Chuck dissection.
Nice.
Even non technical can understand this.
Thank you for your effort.
Keep it up. 🙏
Whoever invented this was a genius
Childs play - check out an old mechanical adding machine or the Antikythera Mechanism
Arthur Jacobs was his name.
What a great video man ! Many times I asked myself, how this stuff works. Thank you !
Interesting. Thanks for that. I've had chucks getting very stiff due to dust / dirt getting in, when e.g. drilling into ceilings. So I soak them in white spirit & work them open / closed several times to flush out the dirt.
excelente vídeo. No me explico cómo alguien puede dar un "no like" a un vídeo que nos enseña y nos guía para arreglar esta herramienta. Gracias por compartir sus conocimientos.
Very good explanation without using any voice. Two thumbs Up!
Cosmo John ดีแต
Thanks! I understand so much better now that I will be replacing my chuck. Bummer, but it helps somehow to know exactly why!
Wer
Thank you. I have used the same procedure for my chuck, that is identical.
Thanks for giving us a look inside a chuck.
Showing the "culprit" with the forceps was one of the beautiful part of the video.
Exelente video señor .ocupo amenudo eso en el taladro y asta los he cambiado. Y no tenia idea como era su mecanica asta hora .dedito para arriva 😁👍👍👍
Thanks for the vídeo.man! I got the same problem on a cheap drilling machine I bouth new for 15 € some 4 or 5 yars ago! And here for cheap machinery not always are available spars! So again: thank you!
pedro tomé
What an awesome video, excellent content and very well presented, you deserve an award!
Nice 3D CAD illustration!
That's what a great youtuber did! Great effort succeeded. thanks for sharing.
LearningZone 357
Yeah got a B16 up market chuck to fit to my budget drill press fitted the original one from start could not get it off , this video explaind how to remove great cheers
Very clear like a surgeon on the operating table...I could hear a pin drop...
Excelente video, muy didactico.Gracias
Interesting video . I always wondered what's inside a drill chuck . Thanks !
Thanks but very slow u r demo
You saved our lives, you helps us a lot for our design universsity project!
I LOVE YOU BYE
Thanx for not using a computer voice, Chuck. : )
thanks for the video. i finaly found way how to pull out the chuck from drill press. knowing inside the chuck is impressive too...
Lp j8 porno alexis
Excellent - And now you know how it works and why Albrecht or Jacobs chucks are so costly. Those who would scrap it and buy another are doomed to eternally buy and replace.
jerry quigg Well, the good stuff is always expensive...
The great invention of drill. chuck..... All machine users used this tool...
we are sending you the award for this work... through a courier
Nicely done video and yes you are right, those things would need some special press tooling and a lot of force to open without doing what you did. Though I would have just given it a lick with a cutoff disc while it is spinning in the drilling machine.
This is why I love those one-piece keyless drill chucks, they are easily disassembled by unscrewing the cover, cleaned and returned to service. But even though the name is keyless, I still recommend the ones that have 3 or 4 holes around the chuck so that you can tighten them properly with a pin/hook spanner.
Now that I know, I would drill a hole in each side of the press cover to remove, and use pins
Never had one to freeze up like that,but always wondered how they work.
nice teardown
Great work...
Very good job! Thank u
Nice and useful information. Thanks
I had a similar problem. The drill chuck was open and I could not clamp a drill bit into it. I applied some lubricant into the space or groove that is between the inner fixed part and the outer revolving part of the drill chuck. After 24 hours or more, I could loosen my drill chuck.
That’s how it works inside. Very clever 👍👍
Nice. I just wanted to see the factory machined broken part. Seen conecting rods made like that.
Neat to see the inside, thanks for sharing.
This video is very detail, scientific and smart 👍👍
Thank you for sharing this.
desde colombia GRACIAS amigo por compartir es importante este truco.
Great work!!!. long life health and peace. thank you!!
Jayme Mendonça ธ
Jayme Mendonça XXX
Xxx
There is absolutely nothing wrong with buying low quality products made from low quality materials. It works out great for the manufacturers.
Ya podré arreglar mi mandril, gracias.
LA BERRAQUERA....!!!
EXELENTE VIDEO.........👀👍👍👍
Very nice cam
That's vary good thanks for your
That chuck looks dangerous where it has been cut away. Catch a hand on that spinning chuck and likely to have a gashed hand to deal with. Best to chuck it away and buy new.
what a wondeeful engineering!!
damm, I never thought of taking my 5/8" chuck apart
I did think not to toss it so I'm going to try what you showed
thanks.
Good tip about numbering the 3 fingers.
I learned that the hard way on my lathe.
good video
An effort like this deserves a like.
Good tutorial for me thank you!
Very interesting, I was wondering the same thing.
amazing! cheers from Brazil
MILOS ENTROPIA
Nazmi salihu hi!
everything is soo silent...yet so clear👍👍
Brilliant, and so was Jacobs the inventor of that chuck.
Super very clear explanation
Thanks. Very interesting.
A very interesting and informative video. Thanks.
Very informative..
that threaded sleeve is supposed to be broken in the middle.. literally broken in half is how they come
Mai visto... Grazie, Fausto (Italia)
I'd like to meet the person who invented that thing-!!
That thing looked like it actually didn’t have much run out at all I was pretty surprised..
Thanks. I enjoyed and learned. My old (from about 1980) Craftsman doesn't hold drill bits very well. I tighten the chuck as much as I can, but they slide. Do you think a chuck will take care of it? I assumed that there were some teeth or something that grabbed the bit that were worn, but I didn't see anything like that on your video. Any ideas? Thanks.....
A chuck of a good quality works for ever😂!
Thank you for tutorial.
simply brilliant!!
1:17, like that ! Simple and nondestructive. 😊
2:49 like Data, on “Times Arrow” Star Trek, next generation.
I had a chuck do this, I wasn’t very silent about it.
thanks for you so much
Owath Wadada Sri Lanka Capita
My drill chuck locked up too. I wasn't getting it free nor removed so i figured lets buy a new drill. And a week later it freed up and now i have 2 battery drills
Not bad though. I have big wood projects coming. So i can have a drill bit in 1 and a screw bit in the other one.
this video saved me
very useful video.
When I was growing up we made such things out of stone.
very good...thanks
Está sorprendente la pieza.
Thank you sir
Well I be danged. Guess I'll be taking mine apart. Thanks!!
Very good
that chuck never jammed thanks for the silent video
Did you watch the video... he removed a broken chunk of thread material??
You can't be serious.
Now that was interesting!
You didn't have to cut it apart. They are made to push together and apart with the broken ring gear used to keep it working inside. .
You have probably experience with a different type of drill chuck. The sleeve of this type is made from 1mm iron sheet and its bottom edge is pressed into the groove in the ring (1:14). The force necessary to bend the bottom edge straight in one step would be enormous - and there is nothing on the sleeve what provided a good grip! The cut not only make the necessary force smaller, but mainly create support for the ring (1:36), so the force could be applied.
legal voce compartilhar,aprendi sempre tive curiosidade de saber como era dentro
Thanks a lot
Thanks all you
Отличная работа. Спасибо.
5:28How do you install the chuck on the shaft? I don't see any thread on the shaft.
en.wikipedia.org/wiki/Machine_taper
Good
Ah, ..........por isso que não conseguí, já tem vários dias que monto, desmonto e não conseguia aparelhar as pontas; então é só usar um parafuso pra igualar as pontas, né?.
E vou te dar uma dica: - sem precisar ferir com segueta o anel de proteção; é só segurar o mandril com uma das mãos, indicado e polegar e dê uma martelada no fundo do mandril, se acontecer um massadinho não interferir em nada ou se quiser também colocar um parafuso curto no seu fundo e dai-lhe martelada. Solta na hora.👍
thank you so much
L
Lol
Ótima dica porém eu não sabia ok muito dez valeu
Guys, I´m so sorry to tell you that broken ring IS NOT broken, it is design in that way, if not, how it could be assembled in that part of the chuck. There is no way you can put in.
excelente video
Good idea sir