Atv stuck in gear. How to start it.

Поділитися
Вставка
  • Опубліковано 22 січ 2025
  • This shows how to bypass most atv’s to start while in gear.

КОМЕНТАРІ • 57

  • @quincyobrien9219
    @quincyobrien9219 10 місяців тому +3

    You saved me half a weeks wages to fix have this fix, thanks man

  • @S_M_360
    @S_M_360 3 роки тому +5

    Thanks electrician, worked like a charm after being stuck in 1st. Actually found some not so good wire hacking from previous along the way unrelated. Beer 🍺 for you.

  • @starsilver9228
    @starsilver9228 2 роки тому +3

    This works really well thank you. For a non mechanic / not electrical person I managed this little hack. Thank you so much for posting 😊

  • @playzkidtorres8355
    @playzkidtorres8355 3 роки тому +5

    What i did I made sure the fourwheeler was on and push it while trying to change to neutral. It worked for me.

    • @thefrogoligist3076
      @thefrogoligist3076 2 роки тому

      Thank so much man I did the same and mine switched back in gear

  • @erikmallea1014
    @erikmallea1014 4 роки тому +3

    Thanks for this. It works on my quad to get it started

  • @georgecowart5591
    @georgecowart5591 2 роки тому

    Bro you are the best I did what you told me my full Willer in reverse and I and I did what you showed on your video Work thank you so much thank you thank you thank you thank you thank you brother

  • @philipjean1086
    @philipjean1086 7 місяців тому +1

    Worked on my 2001 Honda 350 rancher thanks so much for this. I have intermittent transmission problems so I wonder if it would cause any issues if I hooked it up permanently to start in gear

    • @Kiwi_pete
      @Kiwi_pete 7 місяців тому

      Wouldn’t hurt to leave it that way.

  • @samvautour9907
    @samvautour9907 Місяць тому

    What u use so u could cut the coating on the wire and not cut the wire?

  • @Thisheresthegoose
    @Thisheresthegoose 4 роки тому +5

    Hold the front brake and turn the key on then push the button if it’s a foot shift

  • @pelonmichel715
    @pelonmichel715 3 роки тому +1

    My cuad idles fine and responds good when I shift full throttle butturns off as soon as I shift IT into first gear or reverse,someone please HELP

  • @kaylincrawford4728
    @kaylincrawford4728 3 роки тому +1

    This man's a genius

  • @grandcrappy
    @grandcrappy 3 роки тому +1

    Maybe that will help with my Bayou 300, no start neutral safety switch??

  • @TheSaskachewan1
    @TheSaskachewan1 2 роки тому +5

    Honda has a built in bypass. With the bike in gear hold the right hand brake, turn on the ignition then start. It will be in gear ready to go.

    • @trenterwin7809
      @trenterwin7809 Рік тому +2

      Holy fuck man thank you,you saved my ass

    • @lawrenceturner4586
      @lawrenceturner4586 Рік тому +1

      Happened to my wife's 2023 Recon. Could not get in neutral to start, used the advice about pulling the right hand brake and was able to use the electric shifter to get to neutral. Only about 3 miles from new.

    • @ndjdjdjd8846
      @ndjdjdjd8846 Рік тому

      Saved my ass

    • @TheSaskachewan1
      @TheSaskachewan1 Рік тому

      @@lawrenceturner4586 did it work on a new 2023? Mine is 7 years old. Sounds like honda has a big problem with shifting

    • @lawrenceturner4586
      @lawrenceturner4586 Рік тому

      Works on the 2023 Recon holding the right hand brake and using the shift button to get to neutral. I believe this is a safety feature so you do not start in gear and take off if you Rev it to start. I never read this in the manual anywhere, it may say it but I can't find it.

  • @drewdurke744
    @drewdurke744 3 роки тому +2

    if u in gear for a honda you can pull in the front brake and it will start in gear

  • @fisheyedaddy
    @fisheyedaddy 2 роки тому +3

    There is a foot crank arm that attaches to the left side - manual shift forward for UP and backward for Down

    • @yeahright302
      @yeahright302 Рік тому

      yes there is but if that wont shift up or down,this is what a person can do to fix it!!

  • @wellingtoneokwiri9157
    @wellingtoneokwiri9157 Рік тому +1

    Thanks, it worked for me

  • @DrydenTeele.
    @DrydenTeele. 17 днів тому

    you could just start it by pulling the brake in and starting it in gear

  • @vancemacd6315
    @vancemacd6315 4 місяці тому +1

    Very cool.

  • @MarkDulisse
    @MarkDulisse Рік тому

    my problem is that the neutral light is on, but the gears are not in neutral. Where is the neutral switch on these atvs

    • @electricguydan519
      @electricguydan519  Рік тому +1

      Lower left side of engine I believe or right in the back of the engine. Trace the big wire harness to it.

    • @MarkDulisse
      @MarkDulisse Рік тому

      @@electricguydan519 green neutral light on, but stuck in a gear. Has manual foot gear lever, but doesn’t change anything when go all the way down. Weird

  • @motomatt6099
    @motomatt6099 4 роки тому +1

    Very helpful. Thanks

  • @ElijahCisneros
    @ElijahCisneros 3 роки тому

    I have a 1986 Honda 200ex that is in neutral but the light indicator says it’s in reverse so it won’t let the quad start, will this hack work with my problem?

  • @420highlife3
    @420highlife3 3 роки тому +1

    Thank you for the help

  • @guerillablood18
    @guerillablood18 4 роки тому

    What happens once you pull the gator clip off once started? Will it jump back to first(or whatever gears its stuck in) gear automatically, or will it stay in neutral? Not understanding how that shifted it into neutral.

    • @electricguydan519
      @electricguydan519  4 роки тому +4

      It didn’t shift to neutral. It tricked the electric to think it’s in neutral so it will start in whatever gear it’s stuck in. Hopefully 1st or 2nd gear. Keep the brakes on when starting. It will want to drive.

    • @electricguydan519
      @electricguydan519  4 роки тому +2

      Just a quick fix to get it on a trailer or into a garage.

  • @brianvalentinesr7208
    @brianvalentinesr7208 5 місяців тому +1

    Thank you

  • @samvautour9907
    @samvautour9907 Місяць тому

    So u can place ur clamp

  • @denisewright416
    @denisewright416 Рік тому +1

    Thank u so much!

  • @danielchan9100
    @danielchan9100 4 роки тому

    Tried it but it didn't work. Mines is a 2008 420 manual trans n its stuck in gear.

  • @MelvinWhitmire-fb4gl
    @MelvinWhitmire-fb4gl 8 місяців тому

    You could have just put a screwdriver across the main wires and would have saved you trimming the insulation from them wires

  • @immevods7399
    @immevods7399 Рік тому +1

    Thanks Dan. Or should I say Frank Gallagher 💀 but he’s not this smart.

  • @peterbigstone1396
    @peterbigstone1396 2 роки тому

    Good to know Thanks👍

  • @julittaszczepanski3808
    @julittaszczepanski3808 Рік тому +1

    Looks like a lot of work. Sometimes rocking works or use the key and switch it manually without taking everything apart.

    • @yeahright302
      @yeahright302 Рік тому

      lol,your not to bright are you?when nothing works and its stuck in gear,this will get you to run again!!

  • @stevenmiller324
    @stevenmiller324 2 роки тому +2

    If you hold the front brake on, it should start in gear . That is how I do it with my rubicon.

    • @yeahright302
      @yeahright302 Рік тому

      does not work with rancher,rubicon not the same!!

  • @KevinGuerrero-k8m
    @KevinGuerrero-k8m Рік тому

    Or You Can Shake sur FourWheeler And Push Down Shift :D

  • @thetruth8958
    @thetruth8958 3 роки тому +2

    Very helpful. Thanks