WEN" The GOOD CHEAP Amazon Rotary carver is the perfect tool to get u started wood carving.
Вставка
- Опубліковано 6 лют 2025
- INTRODUCTION of 7 videos carving woodspirits showing that the GOOD cheap Amazon Wen rotary carver will get the job done for the beginner wood carver.
Wen power carver : amzn.to/3Ww7AFG
Wen on off foot pedal :
amzn.to/42uzt4J
Dremel : 1/8 collet :
amzn.to/4ax56g8
Dremel flex shaft : amzn.to/4ggffz9
Kutzall 1/8 extream flame bit
amzn.to/4huPb4d
Kutzall 1/8 original flame bit:
amzn.to/42qGO5v
Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and diskskutzall.com/?af...
All the carving tools i use are in this amazon shop listed below👇
As an Amazon Associate I earn from qualifying purchases.
www.amazon.com...
If u wanted to buy me a coffee here is a link to my pal pal👇
www.paypal.me/...
Shirts and gear
jordy-johnson-...
STARBOND GLUE 👇🏻
Use code : Cfusion to save 10%
www.starbond.c...
HERE is the link for the BP-Hst
That had 2 handpieces
Use code CARVINGFUSION TO SAVE 10%
www.ramprodinc...
Here is the link for the Ram iCube micro motor
www.ramprodinc...
Here is the Amazon link for the dremel 4000
amzn.to/48V7EDZ
Dremel flex shaft on amazon
amzn.to/40PfxIW
Dremel 3 set collets 1/8 and 2 other smaller sizes.
amzn.to/48QbApD
Wen on off foot pedal on amazon.
amzn.to/3CGf5me
Wen rotary tool with flex shaft amazon.
amzn.to/3Cy7hD8
10 pcs aluminum cutters on amazon
amzn.to/3CretAU
20 pcs metal working bits, 10 big 10 small.
amzn.to/3AGx4IR
Wall tile cutters bits.
amzn.to/4ey4YNU
Wood burning set Amazon.
amzn.to/3AKh0FX
Cheep Chinese 3 point cutters.
amzn.to/4hVbtNp
Butane torch.
amzn.to/48ShZ3y
Makita die grider/beginners
amzn.to/4i6zG3J
Makita 800c die grinder /PRO
amzn.to/3Z8vwkg
VEVOR die grinder:
amzn.to/3AX1neh
6 pcs sanding madrels:
amzn.to/4fT7sXV
3m Scotch bright for sanding mandrels
amzn.to/491r227
Emery cloth roll 120 grit
amzn.to/48VrCOW
etsy.me/2Usrss6
/ carving_fusion
#woodcarvingbeginner
#carving #woodcarving #carvingfusion #Jordyjohnsonwoodcarver
#Jordyjohnson
#howtowoodcarve
#Howtowoodcarve?
#Beginnerwood
#dremel #artist
#Woodcarvingideas
I've had 2 wens for years, and they outlived all my other rotary tools including my dremal and craftsman
Awesome
Go Jordy Go !
Thanks for the tutorial, I just got one of these and I will definitely look into what you are saying about it!
I’m definitely going to have look into this! All my stuff is on its last leg! I break everything! Probably because I carve stuff that I should be using a die grinder a Foredom, a chainsaw and I’m using my dinky dremal 😂….. Good stuff!!
Lol james
Jordy, I just went and bought everything you just showed! 👍🏻👌🏻
Lol crazy man james ty
Great video jordy thanks for the tip thanks for the shout out for the challenge and looking forward to your challenge 😊
;)
I really like the Wen finger sander. It's cheap and works real nice
heck yea awesome tool review!! i love your challenges!!! i can't wait!! thank you for the video!! Stay Safe!!!!
Great vid for the noobies bro 👊 exiting times coming with challenge and awesome spikes gunna be involved 😁🤙
Great video Jordy, Your carving challenges are always great fun as we get to see the Tribes entries 😃 plus a chance to win a carving or tool's, so Im DEFO in for this challenge bro. It'll be my first ever entry into a challenge 😜this is gonna be wicked fun 🖤🤘
Dremel is getting expensive...I have four...just getting by buying replacement brushes..but the armatures wear out eventually. Great video Jordy thanks.
Cool review, keep em coming. 🌝 Haters gonna hate- keep on creating!!!
Thanks dude good to see ur back making videos
@ Anytime, thanks for all you do, it’s appreciated!
Another Great Video Jordy. I did the same thing hooking the Dremel flex shaft to my Wen.
Great tips, thanks Jordy.
Thanks! Being a noob with these tools, I had thoughts, questions on after market and Dremel flex shafts. You answered enough of them, with a bonus on foot pedals, eh.
:)
Jordy, I had one bad first experience changing a 1/8” burr on my Dremel torking it good. I was carving some hard elm and I thought I seen the burr slipping out a little . Before I knew it that burr went firing out like an arrow and stuck in my insulated garage door. I think I made too much back dragging strokes towards me when carving but I’m not sure. It hasn’t happened again so bad luck once or the work of a wood spirit it’s only been one surprise
Awesome Jordy thanks for the video
I use to make these cables, use grey anti-seize, it lubes way better, runs COOL. DO NOT USE GREASE
Thank u
Thanks I was always curious if they were any good
They are good for the price 👌
thanks for the video, good to know.
:) thank u
Good review
Thanks!
Jordi, when are you going to carve the eyeball video ?
Last video
Is the hand piece not vibrating too much? And is the flex shaft as qualitative as the dremel one, apart from heating up quickly?
No it's not but works
@CarvingFusion thanks for your answer !
@CarvingFusion and hello from France!
*In an ominous, movie-trailer voice*:
-In a world where woodcarving tools reign supreme, one brave carver dares to wield the mighty Wen rotary tool!
-Armed with flexshafts and Kutzall flameburrs, he prepares to unleash a seven-day carving frenzy.
-Will he emerge victorious, or will he be buried under a mountain of shavings?
-Stay tuned as we witness the epic battle of man versus wood... and the inevitable chaos that follows!
😆🤘
Hahaah that's mint! Thank u lol
🇨🇦🇨🇦🇨🇦⭐️⭐️⭐️⭐️⭐️🇨🇦🇨🇦🇨🇦
I hate wood spirits. When are you planning on starting these videos?
🤣
Lol great! Tmrw
Hahaah lol do t hate and carve deeper!!!! Lol funny
@@CarvingFusion Exactly bro
heck yea awesome tool review!! i love your challenges!!! i can't wait!! thank you for the video!! Stay Safe!!!!