Love the vid, I've modified my z1 to a bbshd and upgraded the controller on the stock motor.... So dual motor each with thier own power source torgue is great when mashing down on both throttles but my top speed is lacking........... Will swapping the standard rear sprocket improve topspeed with the bbshd as its topping out at 27ish mph Keep up with the awesome vids
Hey Johnny! Congratulations on having the fastest Super73 "Z" in the world and congratulations on having the SECOND fastest Super73 "bike" in the world - We can't say too much if you know what we mean 😉 Very well done Buddy!
Hello! I have a question about your Stock Front Suspension. How did you install it without any problems and where you bought it, could you share it? Thank you!
Great build man! I gonna swap soon to a bbshd 1kw motor now i ride a 1.5kw rear hub motor but the torque is mehh can you please tell me which helmet you got that thing looks really good :)
little late i know but, to get the best out of mid drive u should use at-least 9 speed rear cassette....totally different ride experience when u are able spin mid mounted motor using high and low gears....
Hey brother Iv watched this video like 10 times. Awesome work. Is there anyway to upgrade a Super 73 R series to something along these lines. I love the bike and the setup but I do wish I had a bit more power. Would greatly appreciate any advice you have
Sick build man!! Are u selling your bbshd kit?? Any thoughts about a front wheel hub motor? Cause I’m thinking of getting one with 1000watt and 52v which will cost me less money than a mid drive motor. Thanks bro can’t wait to see your next vid!
trey fs I’m bit a big fan of the front wheel hub motor. The weight on the front axle has a bigger impact. Steering feels different and mostly the mounting points are not that strong.
It's been fun to see what you've done putting a powerful mid drive on this frame. It's been highly informational. I see you ended up taking the z1's orginal hub motor off? Was that just to get weight down or does it run smoother with just the regular mtb hub?
Yes! :) I took it off mostly for the weight reason. The setup is strong enough, you don't need the hub motor anymore. But if you don't care about the weight, you can run a dual motor setup. There is a hack remove the limiter of 21mph for the orginal motor. So it don't cut off when you go faster. ;)
@@johnnypuetz Hi again Johnny. Been a while. Just wondering if you had any more infor on this hack to remove the limiter on the super73 motor. anything you could share would be greatly appreciated :)
Hello man, I loved the videos you made of the super 73, but could you give the dimensions of the painting only so much length, width and height, it would be of great help, I would like to be able to try to do it here in my Argentine country. many greetings and congratulations for your work
@@johnnypuetz excellent, was looking at the bottom portion of the dropout earlier. Plenty of material to remove 1mm and the load is mostly up top were my thoughts. thanks!
A glorious build! I saw the comment below asking about the rear wheel. Do you know the length of spoke you used when you laced the rear wheel? I have a mid drive on my Super73 and would like to do the same to lose some weight! She's so heavy! Cheers, Dave
Engels k the original battery is a 36V, hidden under the seat. The easiest will be add another 36V and run it in parallel to the original one. Make sure not to wire the battery in series. This probably will blow up your controller.
Now that's a great mod, the cyclone is a bad ass motor.. nice work guys.. question, is it possible to mount the motor above the frame and backwards to keep the clearance ?? . Great mod ..
Brian D Howard You won’t be able to mount the motor like the barfang without modify the mounts. It does not have a lot of clearance now, I was already considering to look into this.
Great videos! I’m very interested in accomplishing the same goal. I’m planning call super73 tomorrow to order a bike and hopefully be able to purchase without the motor or battery (if possible). Is there anyway you can provide the list of parts used? I know you got the motor/battery from Luna. I saw a comment with the hub you replaced with but is currently sold out. Just trying to the complete parts list together before calling up super73 to see if they would even sell it minus components I won’t even need. Thanks!
Hi, pardon my ignorance but how did the sprocket change made the bike go faster? Did you swap the first one to less teeth or more? What is the Science behind it? Especially for a bike that doesn’t need pedaling. I’m really interested in swapping my single cog as well once I know the reason behind the additional speed. I hope you answer. Thanks.
A. Castro Adding teeth to the front and rear sprockets have opposite effects. Installing a larger countershaft sprocket creates higher gearing, while a larger rear sprocket lowers gearing. Similarly, a smaller front sprocket lowers the gearing while a smaller rear sprocket makes gearing higher.
Gearing a bike up to produce higher top speed with less acceleration is done using a larger countershaft (gearbox) sprocket or a smaller rear sprocket. Gearing a bike down giving it more acceleration with lower top speed is done using a smaller countershaft (gearbox) sprocket or a larger rear sprocket.
One downside of this setup is that the power comes from the chain. Meaning if you are goin fast your chain is spinning crazy fast. Wear shorts. If your pants snag, you will be riding home naked.
@@johnnypuetz Wow, for real that tiny controller is powerful enough for the motor and battery. Thanks for the response, i asked b/c im looking to try and replicate this build in the near future.
This so such an awesome build, can you explain how you took the hub motor out and added the new hub piece ? Also did you get new spokes to put it all together ?
johnnypuetz johnnypuetz do you have a link for the hub piece? Being honest, this video makes me want to mod my z1, I want that same rear wheel without the hub motor and add the 1000w mid drive and the 52v battery pack. Did you need a specific nut and axle size ? I would appreciate some links for all parts so I can mod my Z1 :)
Hey man, no problem. I ordered the rim and tire from Super 73 themself. They sell replacement parts. I think you need to send them an email for the link. Tubes - amzn.to/35lnVkM Hub - amzn.to/2xufAPm You will need spokes too.
Sergio Luiz good question. I went the route with a mid drive because the weight is better balanced and it’s lighter than a rear hub. But I rode a few rear hub bikes like the ZOOZ bike and that was a great experience too!
The difference with a mid-drive is that you can put your power through the gears so tons of low end wheelie torque and high speed with your small gear.
@@johnnypuetz Ok, ya I can see now what you mean. It's still great as you're not going to off roadside that thing... It serves its purpose... Beastly street speeder! Sick dude!
Hey man Ducati NyC sent me over to you I have a rose ave s1 and want to upgrade motor and battery but i am not tech savy by any means, how can I get this done?
Hey Peter, Thanks for subscribing! :) To answer your question, I see two options. You do some research and do it on your own or you pay someone to do it for you. If you decide to do it on your own, please let me know if you have any questions on your way but please do some research first. ;)
I'm super new to this bike and I'm definitely getting one. I'm a bigger guy, and actually live in the New York area. Do you customize bikes for others as well ? I was thinking about getting a 5000watt motor being that I'm a bigger guy (250lbs) what do you suggest
@@claudiosalcedo15 All you need is a 3kw rear hub motor like a QS 205 V3 a Sabvoton controller and a 72v 25ah battery. You will easily hit 50+ mph and pull wheelies. That's a 3kw nominal motor 8w to 12kw peak power. It will have hills no problem climbing the steepest of hills.
Piotr Bagniewski I never did a full range test. I would assume that you can do about 20miles, but not sure. ..in the video I said that we are running out of battery. The battery has a peak fully loaded and produced the most power. But this last only for very short time.
Hey! Do you have link for that front suspension? I've been looking everywhere for one! My Z1 goes to about 35mph with BBSHD and rear hub motor (with custom controller). Thanks man!
Nice!!! That sounds like my old custom build but I didn't have a custom controller. I love the design of the motor and that you can mount it on top of the frame and have more clearance. However, I have the front fork from Super73. The sold them on their website. But it seems not available right now. ..I would reach out to them. They are super nice and they can tell you when the fork will be available again.
maniwahn das kann man nicht so einfach beantworten. Es kommt mehr drauf an, wie du fährst. ..die Battery hat 17ah. Wenn ich normal fahre, habe ich ca 4 Volt verbraucht auf 8km
I’m looking to buy super 73 can you modified my super 73 when I buy any way I can contact you I’m also from new you!!! Please or show me what I have to buy let me know thanks
Milan Nikolic nope, still able to hit 30mph uphill. :) we also played around with the front sprocket. We changed the front sprocket to a smaller one. It does power wheelies than and top speed is about 30mph. Little hooligan bike.
No offense but no one wants to see someone yap about a bike we want to know how you did it. To you, that may be easy to understand but for others who know nothing about E bikes a detailed explanation will do.
Shame you couldn't put that motor in the frame like a proper cafe racer, looks awful where it is and not very well protected, and a gaping empty whole in the middle of the bike🤔🤔
Great build ,can you please tell me what protective clothing you are wearing pants and hoody as I want to get some
Thanks
Lee Harden these are the pants: www.uglybrosusa.com/
hoodie: www.uglybrosusa.com/collections/gullinbursti
Bulletproof
@johnnypuetz do you have a video showing how to the hack for the hub motor?
About time somebody grew some balls and modified this 73 e-bike. Fantastic from USA !!
Your a mechanical genius you would do very well customizing peoples bikes if you do let me know I will be a customer.
Haha this is awesome! Never thought I'd see a Z1 go 45mph!
Tristan Ervin 50mph is our new goal! :)
@@johnnypuetz time for a 5000k cyc maybe? lol
@@johnnypuetz How far does that battery last going 45mph ...how many miles?
@@moesizlak3066 that’s a garbage motor look at lightning rods big block 😅
Impressive. Electric motorbikes are the future.
Nemesio Ciau totally agree!
Love the vid, I've modified my z1 to a bbshd and upgraded the controller on the stock motor.... So dual motor each with thier own power source torgue is great when mashing down on both throttles but my top speed is lacking........... Will swapping the standard rear sprocket improve topspeed with the bbshd as its topping out at 27ish mph
Keep up with the awesome vids
You, my good sir, are an absolute madlad.
Badass. I want to put a 3000w hub motor in my S1 and upgrade to 72v battery.
Hey Johnny! Congratulations on having the fastest Super73 "Z" in the world and congratulations on having the SECOND fastest Super73 "bike" in the world - We can't say too much if you know what we mean 😉
Very well done Buddy!
Super 73 UK excited to see what you are building. Text me when it’s done
💪 Kudos to you - We really respect what you are doing - Keep up the great work...🚀
Hello! I have a question about your Stock Front Suspension. How did you install it without any problems and where you bought it, could you share it? Thank you!
Do u have links in this video and you have a link to the front suspension, and where did u get the wheel
Is overvolting this bike an option? For example instead of 72V, maybe a 96V Battery with a new ESC.
Niceeee ¡!!! dont stop until hit 60 mph¡!!!
Do you have video of the motor and controller install?
I don't.. ;/
Great build man! I gonna swap soon to a bbshd 1kw motor now i ride a 1.5kw rear hub motor but the torque is mehh can you please tell me which helmet you got that thing looks really good :)
little late i know but, to get the best out of mid drive u should use at-least 9 speed rear cassette....totally different ride experience when u are able spin mid mounted motor using high and low gears....
Can u share where and what kind of wheel u got for the back wheel?
Hey brother Iv watched this video like 10 times. Awesome work. Is there anyway to upgrade a Super 73 R series to something along these lines. I love the bike and the setup but I do wish I had a bit more power. Would greatly appreciate any advice you have
filmed right next to the Brinks building. wish I could have seen you in action
Sick build man!! Are u selling your bbshd kit?? Any thoughts about a front wheel hub motor? Cause I’m thinking of getting one with 1000watt and 52v which will cost me less money than a mid drive motor. Thanks bro can’t wait to see your next vid!
trey fs I’m bit a big fan of the front wheel hub motor. The weight on the front axle has a bigger impact. Steering feels different and mostly the mounting points are not that strong.
johnnypuetz are u selling your bbshd kit?? Hehe
trey fs nah... not for now. But I will let you know if so ;)
That's gonna be some fast food delivery... Get those tips!!!! $$$
tymony24 yeeesss!!! Ready for ubereats
I must be missing something. I did 42mph on my stock Super73-R on a slight decline without even thinking about it.
It's been fun to see what you've done putting a powerful mid drive on this frame. It's been highly informational. I see you ended up taking the z1's orginal hub motor off? Was that just to get weight down or does it run smoother with just the regular mtb hub?
Yes! :) I took it off mostly for the weight reason. The setup is strong enough, you don't need the hub motor anymore. But if you don't care about the weight, you can run a dual motor setup. There is a hack remove the limiter of 21mph for the orginal motor. So it don't cut off when you go faster. ;)
@@johnnypuetz awesome. Thanks for the info. Im looking at taking an s2 and frankensteining it in a similar way lol
Thanks again man!
@@johnnypuetz Hi again Johnny. Been a while. Just wondering if you had any more infor on this hack to remove the limiter on the super73 motor. anything you could share would be greatly appreciated :)
@@moesizlak3066 ua-cam.com/video/04-p1ekQJjM/v-deo.html
Hello man, I loved the videos you made of the super 73, but could you give the dimensions of the painting only so much length, width and height, it would be of great help, I would like to be able to try to do it here in my Argentine country. many greetings and congratulations for your work
Awesome video, thanks for sharing! can you share a URL for the fork you used?
tom ebike I got them from Super73. I think they are not available on their website anymore.
Hello Johnny, awesome build! Did you file slots in the 12mm axle to make it fit the 10mm dropout?
I took off a little bit of the frame. To fit the 12mm axle
@@johnnypuetz excellent, was looking at the bottom portion of the dropout earlier. Plenty of material to remove 1mm and the load is mostly up top were my thoughts. thanks!
@@EDvining yeah. Never had an issue with it!
where did the fork upgrade come from?
Lee Cusack super 73 was offering that for a while. I think they don’t sell them anymore.
Are those factory forks?
Awesome video! Did you use thicker spokes for rear wheel to hande the power?
Theodor Standard Bmx size.
Could I get a link for the forks?
A glorious build! I saw the comment below asking about the rear wheel. Do you know the length of spoke you used when you laced the rear wheel? I have a mid drive on my Super73 and would like to do the same to lose some weight! She's so heavy! Cheers, Dave
What exactly do you have to buy for the Luna cycle motor?
I just want more range, any ideas of how to use a second battery on the z1
Engels k the original battery is a 36V, hidden under the seat. The easiest will be add another 36V and run it in parallel to the original one. Make sure not to wire the battery in series. This probably will blow up your controller.
Now that's a great mod, the cyclone is a bad ass motor.. nice work guys.. question, is it possible to mount the motor above the frame and backwards to keep the clearance ?? . Great mod ..
Brian D Howard You won’t be able to mount the motor like the barfang without modify the mounts. It does not have a lot of clearance now, I was already considering to look into this.
@@johnnypuetz thank you.. again great mod .. 40+ on a Z is very fast
Brian D Howard our new goal is 50mph :)
@@johnnypuetz awesome
So how much does it cost to do this upgrade and when can I make an appointment?
Great videos! I’m very interested in accomplishing the same goal. I’m planning call super73 tomorrow to order a bike and hopefully be able to purchase without the motor or battery (if possible). Is there anyway you can provide the list of parts used? I know you got the motor/battery from Luna. I saw a comment with the hub you replaced with but is currently sold out. Just trying to the complete parts list together before calling up super73 to see if they would even sell it minus components I won’t even need. Thanks!
Did you end up calling Super 73 and bought a bike?
johnnypuetz Not yet! But 100% will soon. Moving and once the move is done I will.
Hi, pardon my ignorance but how did the sprocket change made the bike go faster? Did you swap the first one to less teeth or more? What is the Science behind it? Especially for a bike that doesn’t need pedaling. I’m really interested in swapping my single cog as well once I know the reason behind the additional speed. I hope you answer. Thanks.
A. Castro Adding teeth to the front and rear sprockets have opposite effects. Installing a larger countershaft sprocket creates higher gearing, while a larger rear sprocket lowers gearing. Similarly, a smaller front sprocket lowers the gearing while a smaller rear sprocket makes gearing higher.
Gearing a bike up to produce higher top speed with less acceleration is done using a larger countershaft (gearbox) sprocket or a smaller rear sprocket. Gearing a bike down giving it more acceleration with lower top speed is done using a smaller countershaft (gearbox) sprocket or a larger rear sprocket.
johnnypuetz Thanks a lot for the information. Most importantly Thank you for even replying! I appreciate it.
Do you have the nuts specs on that you used for the rear pegs??
Exploring with Stewarts I don’t. But they won’t fit to the original motor/axle anyway because the axle and the hub is not the original anymore
One downside of this setup is that the power comes from the chain. Meaning if you are goin fast your chain is spinning crazy fast. Wear shorts. If your pants snag, you will be riding home naked.
any links to your twist throttle? also you mention an extended wire harness in the video, is there a specific one i should be looking for?
Technology, Gaming and Anime the twist throttle is the one from a bafang. The extended wire harness is diy.
@@johnnypuetz By any chance is your controller the asi 800?
Technology, Gaming and Anime it is not. The controller game with the kit with the cyclone 3000w Kit
@@johnnypuetz Wow, for real that tiny controller is powerful enough for the motor and battery. Thanks for the response, i asked b/c im looking to try and replicate this build in the near future.
Technology, Gaming and Anime yeah, I heard great things about the controller too. Good luck with your build! Send pictures when it’s done!
great build! Is the fork stock? Where did you purchase it? It's perfect.
Super73 were selling them for a while and I was lucky that I they gave me one. I am not sure if they are still selling them.
This so such an awesome build, can you explain how you took the hub motor out and added the new hub piece ? Also did you get new spokes to put it all together ?
New hub and had it laced at Meseroll BMX shop! Great guys!
johnnypuetz johnnypuetz do you have a link for the hub piece? Being honest, this video makes me want to mod my z1, I want that same rear wheel without the hub motor and add the 1000w mid drive and the 52v battery pack. Did you need a specific nut and axle size ? I would appreciate some links for all parts so I can mod my Z1 :)
Can I ask what set up you have on the rear wheel and where you got it from? Great vid 👍
Hey man, no problem. I ordered the rim and tire from Super 73 themself. They sell replacement parts. I think you need to send them an email for the link.
Tubes - amzn.to/35lnVkM
Hub - amzn.to/2xufAPm
You will need spokes too.
What’s the beat playing in the backround?
Do the longer crank arms pose a problem?
Andrew Wayland no. There is no problem with the size of the crank arm
What size are the wheels and tires on this model.
20inch
Thanks!
putting a 3000 / 3500w hub on the back wheel would not give the same in speed / force? why middrive? for the fastest torque response?
Sergio Luiz good question. I went the route with a mid drive because the weight is better balanced and it’s lighter than a rear hub. But I rode a few rear hub bikes like the ZOOZ bike and that was a great experience too!
The difference with a mid-drive is that you can put your power through the gears so tons of low end wheelie torque and high speed with your small gear.
How did you mount the battery there
THENEWWRANGLER two welding brackets and one bracket that is adjustable to be able to take out the battery
Sweet dude! Why is the mid drive hanging down and not just tucked up into the space above the bottom bracket? You may bash it when riding over curbs!
Pure Water Window Cleaning it doesn’t fit.. :/ ..I would love to have it up above the bottom bracket but the design of the motor doesn’t allowed it
@@johnnypuetz Ok, ya I can see now what you mean. It's still great as you're not going to off roadside that thing... It serves its purpose... Beastly street speeder! Sick dude!
What size/type of pegs are those?
Amazing. Did the forks fit ok?
Jack Wenman yes, they work fine!
Im looking for a cheap 72v battery. How much was yours and do you have link?
Guy Mcguyver the battery cost me $1000. I got it from Luna cycle.
Great job!
Terry The Kid thanks buddy!
Any link for the battery? Thanks you
Alfath Ajjauzi I bought it from Luna cycle.
@@johnnypuetz thank you very much
Whats the range on that beast?
Do u guys have a shop to do custom mods?
D RP yes I do have one know. Send me an email at johnnypuetz@gmail.com if you need anything and we can talk about it
What was the battery life after this mod??
Vite vite!!!!!!
tymony24 hahah. I didn’t know that you speak French!
What suspension forks on those? Congratulations by the way it's sick
Santiago Santana you can buy them on the Super73 shop
@@johnnypuetz thank you
Hey man Ducati NyC sent me over to you I have a rose ave s1 and want to upgrade motor and battery but i am not tech savy by any means, how can I get this done?
Hey Peter, Thanks for subscribing! :) To answer your question, I see two options. You do some research and do it on your own or you pay someone to do it for you. If you decide to do it on your own, please let me know if you have any questions on your way but please do some research first. ;)
Thanks for the reply , if i were to pay someone (maybe you) how much would it be?
Peter Han you can send me an email at johnnypuetz@gmail.com and we can discuss this more in detail if you like.
Robbz Creation hey Robbz, send me an email to johnnypuetz@gmail.com and we can discuss it more in detail
I'm super new to this bike and I'm definitely getting one. I'm a bigger guy, and actually live in the New York area. Do you customize bikes for others as well ?
I was thinking about getting a 5000watt motor being that I'm a bigger guy (250lbs) what do you suggest
Do you think leaving just switching up the rear hub motor with a more powerful one would give the same result?
@@claudiosalcedo15 All you need is a 3kw rear hub motor like a QS 205 V3 a Sabvoton controller and a 72v 25ah battery. You will easily hit 50+ mph and pull wheelies. That's a 3kw nominal motor 8w to 12kw peak power. It will have hills no problem climbing the steepest of hills.
how long did the battery last for, it seems short...
Piotr Bagniewski I never did a full range test. I would assume that you can do about 20miles, but not sure. ..in the video I said that we are running out of battery. The battery has a peak fully loaded and produced the most power. But this last only for very short time.
Dope bike, what's the name of the 1st song in the background ?
kinda late but i found it. "no matter how hard we try" by moon
Hey! Do you have link for that front suspension? I've been looking everywhere for one! My Z1 goes to about 35mph with BBSHD and rear hub motor (with custom controller).
Thanks man!
Nice!!! That sounds like my old custom build but I didn't have a custom controller. I love the design of the motor and that you can mount it on top of the frame and have more clearance. However, I have the front fork from Super73. The sold them on their website. But it seems not available right now. ..I would reach out to them. They are super nice and they can tell you when the fork will be available again.
Does the battery run out fast?
Chris McHone nope
Now l really want one,thanks for the info
Would you sell your z1?
Can you do this to my super73?
CYCX1 Motor might be next ha.
andrew hunt interesting! Never heard about the motor.. I will do some research!
You are a genius dude! I genuinely mean that!
I need those pants and that hoodie haha looks awesome.
How much Do you charge to get it all done to my z1?
Emmanuel sanchez Send me an email to johnnypuetz@gmail.com and we can discuss this in detail
any link for the motor? Thank you!
google luna cycles
Did you re-spoke the rear wheel or did you buy a new one?
R3DB71ND I bought a new rim with Super73 and my buddy from Meseroll bmx shop in Brooklyn laced it for me.
Wie weit kommt man mit dem Akku?
maniwahn das kann man nicht so einfach beantworten. Es kommt mehr drauf an, wie du fährst.
..die Battery hat 17ah. Wenn ich normal fahre, habe ich ca 4 Volt verbraucht auf 8km
buena idea
tioleopoldo thanks buddy! :)
You in LA?
Tuan Dang no, NYC
I think that last run was at mach 1.
Johnny Knoxville yeah.. it’s been awhile
I’m looking to buy super 73 can you modified my super 73 when I buy any way I can contact you I’m also from new you!!! Please or show me what I have to buy let me know thanks
More proof that hub motors are faster. My 72V 3000W hub motor setup reaches 56mph, and weighs probably 50lbs more.
Ey man where did u get ur new rear wheels???
trey fs I reached out to Super73 and bought it from there.
johnnypuetz how much did u pay for it?
trey fs I don’t remember, but it wasn’t too expensive.
johnnypuetz cool! Do u still need ur rear wheel with hub motor?? :) if not I’m happy to buy it along with the battery and controller:))
Gangster.
T Sheehan haha. 😁
What about uphill ? 0-5mph 🥴
Milan Nikolic nope, still able to hit 30mph uphill. :) we also played around with the front sprocket. We changed the front sprocket to a smaller one. It does power wheelies than and top speed is about 30mph. Little hooligan bike.
So a motorcycle then...
Johan Fagerström Electric Motorcycle. :)
Music too loud bru
BRO SELL ME THAT!! :P
Are you zee German?
Johnny Knoxville ja
45mph is little too slow..perhaps 70mph would be very ideal
Hey you just motivate me I just picked up a z1 today ... can you work on my bike please!!!!! Hahahahaha help me hit 50 I’m located in Brooklyn too
Well now the super RX does 33mph with no mods...scary lol
Around how much $ would a toy like this run me?:)
Jack Sent about $1200 for the bike + $1500 for the mods
fire your audio mixer
cyblur I wish I had an audio mixer to fire!
No offense but no one wants to see someone yap about a bike we want to know how you did it. To you, that may be easy to understand but for others who know nothing about E bikes a detailed explanation will do.
Shame you couldn't put that motor in the frame like a proper cafe racer, looks awful where it is and not very well protected, and a gaping empty whole in the middle of the bike🤔🤔
👌👌👌
I live in NYC how to
Meet you I want the same thing in my bike chrislukusa__ on Instagram
Its not the fastest bike. Stealth bikes are much more faster than this thing
Artur Privat fastest Super73 bike ;)
@@johnnypuetz I can live with that 😌
Kill the background music dude!
Fastest 🤣I ride with people that hit 100mph
Sorry your music was too annoying, couldn't watch the video.
Is overvolting this bike an option? For example instead of 72V, maybe a 96V Battery with a new ESC.
any link for the motor? Thank you!
Κωστας Σχοιναρακης lunacycle.com/cyclone-mid-drive-3000w-planetary-kit/
@@johnnypuetz Thank You!