You explain things so well Justin. I'm no mechanic but have always been interested in knowing more about it. I'm always surprising people by attempting to do mechanic work on my car myself by learning from You Tube videos. I've even been successful a few times. I need videos like this. You are so easy to understand. I feel the confidence to do it myself with your instruction.
23:30 NO! The stock threads are not pipe thread, they are M10x1.0. If you thread an NPT gauge into it you can damage the threads and cause an oil leak.
I've watched a whole bucketfull of VW videos and this is way above all the rest. Justin, thanks. I am inspired by your knowledge, preparation and thoroughness.
Justin pretty good information!!, Just wondering about those sumps added on I made the pick up tube drop lower inside the screen filter wondering is neasary to do that and used adjustable oil pressure relief valve to this at the time was a 1835 build engine?!
Great video. I have a couple of questions for you. I need to change my valve guides and was wondering how many thousandths loose do you ream the guides. Should I purchase adjustable reamers or the drill bit type reamer? Once I remove the old guides and mic them, should I replace them with .001 or .002 over? Thanks
QUESTION PLEASE i watched a video from drag racing tv here on utube and they are saying on a dual case 1600 oil pressure relief in the front NOT TO USE A GROOVED PISTON ? do you know why not ? thank you october 2020 thanks in advance ,,,,
Amazing video 😮you made the most sense and I learnt more in this video than anything else I have read.👍👍 I have a 1981 puma gti from Brazil and I have lack of power at different rpm’s. I am new at this but thank you 🙏
Justin I realise that this video has been on UA-cam for two years now. However I have only just stumbled across your video. I need to say that this is the most informative video that I have ever seen on compression and leak-down testing. Really well delivered and it gives me the confidence to start carrying out these tests for myself. Kind Regards Barry
Watched this again after about a year, makes more sense to me now. Really great info vid, but not sure how much of this could be done before buying the motor
now that my 1600 engine is out and i am going to replace the passenger side head due to a stripped plug thread....do i have to remove the fan shroud to gain access to the upper nuts on the head ?
I bought a new set of Pacino's from CB performance heads and I live in Sacramento CA. The first two months seem to be great. Now the car runs really sluggish and it's summertime. I'm curious is there a shortcut to finding out if the heads are cracked. Without taking the heads off the heads off ?.....
hi justin great video! only 1 question! can you do a compression test on the engine by cranking it over yourself? im building a type 4 2257cc stroker vw engine but i only have a engine stand NO GEARBOX AND STARTER or do i need a special RPM to get ik goinG? i have new /rework heads and pistons en liners but no good compression! do you need to oil the liners and pistons first to get compression? thanks joris de vet // the netherlands
Concise and to the point. I’ve been building internal combustion engines for the better part of 45 years. You hit every nail on the head. I hope the business in the background is yours. You’re going to do excellent! I enjoyed your movie thoroughly. Take care!
Excellent video. I used a compression tester last year and didn't know the throttle had to be opened.I know now.In future could you do a common bolt on upgrade comparison for stock,before and after for exhaust vs quietpack,1.25 rocker vs 1.4,single carb vs dual.That would take the guesswork out of buying parts!
Seriously you kick major butt .I don't have a mechanical background but I enjoy VW bugs and you made working on them so so easy. Thank you for sharing your knowledge
Very nicely done Justin. The cleanliness in your shop speaks volumes about the quality of work you provide. Your explanations are clear and concise. Thanks for doing this video...
Enjoyed your detailed Engine Check. I will be checking in and watching more as you post! Thanks! It is good to see a young man that knows what is going on with Mechanical and Technical diagnosis. Great Job!
Great video, Justin explains the process and what to be aware of very well. Think many of my friends who have aircooled VW's could benefit from this. Going to subscribe...
Thanks Justin, Great info for testing that engine. We just picked up a 72 VW dune Buggy and I will be sure to check these things out when we start on the engine.
If it ran beforehand and all you did was a compression test then most likely the problem will be with spark plug wires installed on the wrong plugs. Also make sure you have a rotor in the distributor.
Really thorough video. Lots of high level mechanical details about sophisticated testing. Thanks for sharing your expertise. Hope you will do more VW engine videos.
You explain things so well Justin. I'm no mechanic but have always been interested in knowing more about it. I'm always surprising people by attempting to do mechanic work on my car myself by learning from You Tube videos. I've even been successful a few times. I need videos like this. You are so easy to understand. I feel the confidence to do it myself with your instruction.
Very clear and down to the point I have learned a lot and this will help me to complete my 66 vw.
One of the best videos Ive ever watched on any topic. Top notch. Thanks!
23:30 NO! The stock threads are not pipe thread, they are M10x1.0.
If you thread an NPT gauge into it you can damage the threads and cause an oil leak.
I've watched a whole bucketfull of VW videos and this is way above all the rest. Justin, thanks. I am inspired by your knowledge, preparation and thoroughness.
Justin pretty good information!!, Just wondering about those sumps added on I made the pick up tube drop lower inside the screen filter wondering is neasary to do that and used adjustable oil pressure relief valve to this at the time was a 1835 build engine?!
Great video. I have a couple of questions for you. I need to change my valve guides and was wondering how many thousandths loose do you ream the guides. Should I purchase adjustable reamers or the drill bit type reamer?
Once I remove the old guides and mic them, should I replace them with .001 or .002 over?
Thanks
Can you do this if you drained the oil?
QUESTION PLEASE i watched a video from drag racing tv here on utube and they are saying on a dual case 1600 oil pressure relief in the front NOT TO USE A GROOVED PISTON ? do you know why not ? thank you october 2020 thanks in advance ,,,,
This video is 8 years old and I'm just now seeing it!?
Awesome video! Extremely informative! Thanks!
Amazing video 😮you made the most sense and I learnt more in this video than anything else I have read.👍👍
I have a 1981 puma gti from Brazil and I have lack of power at different rpm’s.
I am new at this but thank you 🙏
Best video I have seen on the subject of engine engine testing ever
Amazing film Justin, good to see Blackline Racing is still active, "Good Road"
Justin I realise that this video has been on UA-cam for two years now. However I have only just stumbled across your video. I need to say that this is the most informative video that I have ever seen on compression and leak-down testing. Really well delivered and it gives me the confidence to start carrying out these tests for myself. Kind Regards Barry
Do you rebuild engines . I've got a bare block made in Mexico.?
Watched this again after about a year, makes more sense to me now. Really great info vid, but not sure how much of this could be done before buying the motor
now that my 1600 engine is out and i am going to replace the passenger side head due to a stripped plug thread....do i have to remove the fan shroud to gain access to the upper nuts on the head ?
You explained yourself very well and you’re very good at what you , thank you for taking time to to share with us .
very good video justin thanks broseph
do a tutorial on all types and mods of the air cooled vw oiling systems.
Great informative video top shelf thank you very much I'm doing all of it on my 69 beetle today
Excellent video and very good delivery.
Stethoscope used... Subscribed and notifications engaged.
Is it okay to use a striker crank on a original magnesium case thanks
Awesome video thanks for the detailed information
how come you did not follow a career in music like your dad ?
Great video! Great info, Sorry to see that you haven't made more of them..
Great vid, thanks for all the valuable information! :)
Great video Justin! 👍
I bought a new set of Pacino's from CB performance heads and I live in Sacramento CA. The first two months seem to be great. Now the car runs really sluggish and it's summertime. I'm curious is there a shortcut to finding out if the heads are cracked. Without taking the heads off the heads off ?.....
hi justin great video! only 1 question! can you do a compression test on the engine by cranking it over yourself? im building a type 4 2257cc stroker vw engine but i only have a engine stand NO GEARBOX AND STARTER or do i need a special RPM to get ik goinG? i have new /rework heads and pistons en liners but no good compression! do you need to oil the liners and pistons first to get compression? thanks joris de vet // the netherlands
Cool thanks buddy
FANTASTIC MAN!!! More, more, more! Excellent job. Well spoken and great video job!
You just got a follow 👍👍
Concise and to the point. I’ve been building internal combustion engines for the better part of 45 years. You hit every nail on the head. I hope the business in the background is yours. You’re going to do excellent! I enjoyed your movie thoroughly. Take care!
I own a 78 convertible. I don't have the first clue what you're explaining. I'm trying to learn from scratch.
Excellent video. I used a compression tester last year and didn't know the throttle had to be opened.I know now.In future could you do a common bolt on upgrade comparison for stock,before and after for exhaust vs quietpack,1.25 rocker vs 1.4,single carb vs dual.That would take the guesswork out of buying parts!
Seriously you kick major butt .I don't have a mechanical background but I enjoy VW bugs and you made working on them so so easy. Thank you for sharing your knowledge
Even though this video is 6 years old it was the most informative video I have seen yet. Good job!!
Very nicely done Justin. The cleanliness in your shop speaks volumes about the quality of work you provide. Your explanations are clear and concise. Thanks for doing this video...
Enjoyed your detailed Engine Check. I will be checking in and watching more as you post! Thanks! It is good to see a young man that knows what is going on with Mechanical and Technical diagnosis. Great Job!
Great video, Justin explains the process and what to be aware of very well. Think many of my friends who have aircooled VW's could benefit from this. Going to subscribe...
Fantastic explanations. Clear and easy to understand with no irrelevant bs. Great job
EXCELLENT VIDEO!!! This is extremely helpful!!
Thanks Justin, Great info for testing that engine. We just picked up a 72 VW dune Buggy and I will be sure to check these things out when we start on the engine.
Great work Justin .I have built VW motors for 3 years , still learning thanks for Your time.
Can someone please explain the hot maroon color stuff that's on the head where the manifold and exhaust bolt??????
You guys should do more videos...this one and the IDF float levels video are both awesome
Great video, very valuable information, thank you
One of the best informative videos. To help you buy a motor.
I done a compression test on my 1835 and now it won't start.
If it ran beforehand and all you did was a compression test then most likely the problem will be with spark plug wires installed on the wrong plugs. Also make sure you have a rotor in the distributor.
Mate, that was a great and super informative video..many thanks!
Thank you for this video! Very helpful!
how about some videos on vw front beam work any good vids worth listening to ? like the death wobble and cure !
Very informative and to the point . Thank you
Well done video, straight to the point...will be watching your other vids as well !
Amazing explanatory video! thanks
Justin, where is your location?
I can watch this kid talk all day. Gonna learn today!
Brilliant video,no BS.JUST STRAIGHT FORWARD INFORMATION.WELL DONE. :)
Well done young man. Thanks for the clear info.
great vid. other ideas? anything you've got!
Great “movie” very helpful.
good to learn , thanks Justin.
one of t he best videos out there good info
Thanks
Great video. Does the engine have to be cold or warm when doing the compression test?
Good question, i hope u got the answer
But in my opinion, it's not that hard not to test twice, cold and hot .
Great job Justin.
come to my house do my Porsche 911 😀👍
Phenomenal video. Easy to follow and understand. Thanks for a ton of great info Justin!
Really thorough video. Lots of high level mechanical details about sophisticated testing. Thanks for sharing your expertise. Hope you will do more VW engine videos.
Great testing, top job
man.. you need a woman
Well done is all I can say
great video
Great info man