Sig 226 Legion SAO First Look. Best 226 out there?
Вставка
- Опубліковано 16 лют 2023
- My links to help the channel grow
My Amazon Store: amzn.to/3zAR64c
Lighted 22lr scope amzn.to/3tGVHyl
Treaded barrel protector amzn.to/3stt2Ms
My Phone amzn.to/3aVyz6F
My KeyBoard amzn.to/3hxogXE
My Monitor amzn.to/2LgDTXC
My Mic amzn.to/3vNvLj
EKWB FLT 360 res amzn.to/3t5qaGD
EKWB FLT 360 with pump httpamzn.to/3G3LwIls://amzn.to/3F...
Corsair 7000D Case amzn.to/333zXlL
EKWB Velocity CPU Block amzn.to/3neLsy8
EK CryoFuel amzn.to/3tam945
AlphaCool Pump amzn.to/3q42IIe
Samsung 970 evo NVME SSD - Наука та технологія
I've got the P229 Legion SAO and love the feel in hand. Slide weight tempers the recoil gained from the higher bore axis and it runs like a dream! Just waiting on my Vedder Lighttuck holster for it to come in!
I bought the same Sig. 4 months ago at Auction, new in box, for $808. I love this Sig. just as much as my many Berettas. Super Pistol. :)
Use grease instead of oil on the rails- I use Brian Enos Slide Glide Lite, and it takes the slide action from smooth, to SMOOOTH. ;-) makes a big difference! I have both the P226 and P229 Legion. I went DA/SA, then to both added a Gray Guns flat adjustable trigger, Gray Guns custom strut, with 17 or 19 lb mainspring and competition sear spring kit- takes the already great trigger and makes it AMAZING. The single action now is very close to the SAO, and the double action is smooth and with a greatly reduced pull weight. Perfect. Combine that with the fact that the optics ready legions now have the new R2 optics cut underneath the plate, which allow you to mount and RMR/Holosun without plate adaptors, and suddenly these Legions are really a solid buy and not as cringe as they used to be with the “Legion club”. Plus I LOVE the grey/green finish- black is so 2010. . . ;-)
It is a true masterpiece of a gun great job and spot on brother
please make a short on how often you should clean rifles/pistols. love the content!!
Thanks for all the great content buddy
Thanks for the video...
Just got the baby 226, P229SAO and I love it. Slide release is almost impossible to activate without a hammer but that will change just like my P220.
Love it. The SAO system is the best that there is out of the box, and SIG does it right! However, ouch on the slide stop being used as a slide release on a empty chamber. Yikes
Just got. Legion 229 dasa. Ordering a new slide with Romeo 1 pro red dot. Did all new springs from sig guy and flat trigger. It was great out of box. Now it’s perfect.
Get the Sig Armorer improved hammer strut if you didnt already.
Great video even though y Sig 226 SAO RX isn't a Legion but I like it a lot, I do have 3 Sig Legion guns 229, P320 X5 and P320 X Carry are all very nice guns.
I find this SAO model VERY interesting.
Rented one last week at the range. Sweet shooter. One thing to watch for. The safeties on that one were loose and I was able to make the hammer drop without the safety being fully down.
If it was a range gun then it will have had many thousands of rounds through it so not entirely surprising it might be beat up. On top of that, there is a well documented but not widely known problem with 226 SAOs where the hammer strut contacts the safety bar between the 2 switches when the slide goes all the way back and over time will loosen or even break the safety bar between the 2 switches. Both GrayGuns and the Sig Armorer have come out with an aftermarket improved hammer strut that solves the issue as well as slightly smoothing trigger pull and allowing the hammer spring to compress more perfectly. It is effective for both DA/SA and SAO p22X models.
I have the Legion P-238(380) and it's a great gun. I want the P-938 but yeah, expensive..
Great review what’s your thoughts on the sig p226 pro cut?
Right on sig site they have the slide you want my friend. With or without optic
You carry a 1911. I can see why you did the SAO on the 226. Maybe I should have done the same. When I purchase my 229 DA SA and for someone who really loves 1911. But I couldn't help myself. I had to have it.
there is a well documented but not widely known problem with 226 SAOs where the hammer strut contacts the safety bar when the slide goes all the way back and over time will loosen or even break the safety bar between the 2 switches. Both GrayGuns and the Sig Armorer have come out with an aftermarket improved hammer strut that solves the issue as well as slightly smoothing trigger pull and allowing the hammer spring to compress more perfectly. It is effective for both DA/SA and SAO p22X models.
How easy is the sig armorer superstrut install on the p226 legion sao? I have heard the safety needs to be disassembled because the superstrut can't clear it?
@@ToddKojack Its not the easiest install, there is a fair amount of disassembly involved. Sig Guy here on YT has videos of the breakdown I believe.
@@RikkiTikkiTavi290 okay thank you. I just purchased the p226 legion sao and I'm going to upgrade to the sig armorer superstrut immediately. I don't want any issue with the known safety interference with the original strut
@@ToddKojack I have had zero problems with it, definitely removed the safery crossbar contact.
@@RikkiTikkiTavi290 Did you have to remove the safety assembly in order to install the superstrut? I read the safety needs to be removed first
I 100% agree with you they should’ve stick with Sig P226 legion single action variant* I’m more into metal frame guns then polymer the Legion SAO should’ve been the main firearm for the US Army
Is this video about DWX, or SIG SAUER P226 SAO?
As a Legion owner, what's the point of sending in for the case and coin?
Because it is cool. That is it.
@@alrbredwallso you special and a part of a club. Like cub scouts. 😂😂😂
@a.d.c7941 yes. Exactly like that.
So, you've recently reviewed the Beretta 92X and now this high-feature Sig P226. Which do you prefer and why?
I prefer the Sig as it fits my hand extremely well. One of the biggest factors is the placement of the the safety. It is in a 1911 position and a great spot for my thumbs. Also I prefer single action. I do carry the 90-two every now and then tho.
@@TheJimminiShow I've never shot the Beretta 92, but the Sig fits me well too. However, I like the look of the Beretta over the Sig. The obvious solution is to own one of each. :)
So you carry this cocked and locked ? 1911 style ?
Corse it’s 700 bucks for new slide and optic
This is the oldest version of the 226 Legion with the older gray PVD finish.
Are sigs worth the money? Like a 320 is $400-$500 which is a good price. But all of the 226's, 229's, and 220's are all north of $800.
Full metal guns are almost always 40 percent or more expebsive than a polymer gun. More expensive to manufacture i think.
i love the all metal sigs, i bought my p226 legion new, would i do that again? Probably not, so i regret getting this p226 in sao? HELL NO
Just bought mine used but in good condition. Glad I went that route. Love the SAO trigger.
Why do you not like the beretta or the p320?
I still like em, i just like wkat I like.
why not send it back to Sig to get it optic cut?
Because I dont use Optics on my carry.
Sig smig
P226 Elite instead for me. That gray... i have a P220 Legion (10mm). I love it, it shoots well, it's heavy and rugged enough that I could cave in a bear skull if I missed all my shots, but that gray is so off putting to me.
That DWX is terrible looking . Just saying, also the Beretta was not a mistake. Still a very reliable great gun. Yes my Sig p226 I prefer but don’t dog the beretta M9 for being a great pistol. Just my opinio
English is not my 3rd language lol😂
The military should have used the G17 over the Beretta 92 back in the day. The G19X should have been chosen over the P320.
My baby 👌