I am using yamaha fz150i from 2013 until now with top set modification bore up to 65mm from 57mm (stock bore) with 19ex/22in head, throttle body 32mm, 160cc injector and tuned by Tuneboss, and the topspeed i got over 170gps with 25hp, So far I felt this is the best ecu I ever use with modification, it can handle more than a stock bike, with many features that we can control by using an apps named Tuneboss Manager Pro. For me worth to buy for stock bike and for modified bike because for stock bike I can feel that the throttle response and the speed increase about 10-15% power on road and more power will increase with topset modification.. I also have yamaha R25 and already converted to Yamaha R3 spec which is changing the R3 topset, exhaust AHM Z1, and Tuneboss for R25 with tuning (45hp) , so far I got 178kmh on gps compared to 171kmh gps (35hp) on R25 with exhaust, and Tuneboss only.. perhaps I need to drop a little bit spocket ratio to gain more speed.. Tuneboss is the best ecu. I ever use compared to others because it is not a piggyback or only fuel adjustment it is more than that, for stock bike default map is enough, but if your bike is changing spec like upgrade bore to 57mm, camshaft, head, throttle body or other parts best tuning will give a better result..
Can you link the site where they sell the ecu? I tried for months and I couldn't find any (I'm european too, if the site is from an european shop link it anyway) Thanks
Wow! That is nice! How much did it cost and where did You get it from? The tuneboss website does not have one for YZF R125... Please, I need one sooooo bad!
@@LegendsGarage Thank You! This ECU is probably from R15 or R25/R3, it is very important to know which one before ordering for R125. Do You still have the box for this ECU? If yes could You please check for any indications or marking what type/model of Yamaha Your Tune Boss was originally designed for? It should be written somewhere on the box or instruction manual. And can You please chceck the markings on the device itself? It surely has to have some markings besides the logo. Please, this is very important. And thank You again!
TuneBoss only do r25/3 at the moment, however PVTech do an R125 ECU; it comes with software for your computer and a cable to connect, but it costs 449€ so it'll set you back a bit just for a 125.
Leuke intro! Ben van plan om voor het A1 rijbewijs te gaan en dan oftewel te gaan voor de Yamaha MT125 of de Yamaha YZF R125. Welke denk je dat beter gaat zijn wetende dat ik dagelijks van Aalst naar Brussel ga moeten rijden aangezien ik op universiteit zit en ook rekening houden met het feit dat het mijn eerste bike gaat zijn. Zou super zijn als ik feedback kan krijgen :)
Hey Risutro, de MT125 en R125 zijn redelijk gelijk, beide hebben veel de zelfde onderdelen en zelfde motorblok dus qua power ga je weinig verschil merken. Het grootste verschil zit hem in de rij positie en looks. De r125 heeft over het algemeen wel een iets hogere top snelheid aangezien die iets aero dynamischer is. Ik raad je aan om eens op beide te zitten bij een dealer en kijken wat je zelf het leukste vind.
the 2019-2023 versions are pretty similar, I would go for the 2023 version just because of the looks :D it is beautiful but almost 6500€ (switzerland) is just too much.
With the setup we are running it should be pretty safe, we got our tune and settings from a trusted Tuneboss distributor and researcher, but there is always a risk.
Yo bro please tell me when I buy tuneboss I look everywhere and I can't find it please let me know I only have option buy powertronic but really don't believe it's work
Hi I have a 2018 Yamaha MT 125. I know theyre the same engine so assume same ECU... where did you buy this? And how straight forward was it remapping it for your exhaust. Not too fussy about changing rev limiter, just interested in fuel remapping for a aftermarket exhaust, any info from anyone would be appreciated :)
Hey, I bought my Tuneboss at a local shop here in Belgium. Remapping it is easy and straight forward, just enter the new values in the fuel and ignition table through the app.
Having full control over the bike, being able to set the spark table and fuel table, safety features, moving the rpm limiter,... it has a lot of features. too many to list in a comment.
Bro ik kom uit Nederland waar kan je die ecu vinden kan hem nergens vinden? Raad je powercommander 5 ook aan samne met die ecu en nog een 180 kit en KN luchtfilter
I think looking that your gears are short ,, I'm very happy with 16/52 but it looses out in 6th , I wonder if the ECU power addition would fix that I strongly suggest you spend the couple of pennies on a 16t sprocket to try , I swear you'll think your riding a big bike To get 93mph on my totally stock bike I ran 15/52 (stock is 14/52) on a high way with slingshot clean air drag reduction
Usually there is one headlight on the motorcycles. Another light wich is not on at the end is called "pass" light and you can use it but you have to hold it
Hey, nice Video! Like it and subscribed you;) Can you say me, if it's sure that the ECU of the R25 fits perfectly fine? Worked it without any trouble? How much Kilometer is this ECU now installed? And last question: Which map did you use? Can I use all R25 Maps in the App or how did you do that?
This was recommended by VanHove Motors, head importer and tester for Tuneboss EU. However running the engine for long periods of time at 11K RPM for example on the highway would not be recommended.
just get a better buy jeez. All these mods are just a waste of money and labour most you should get on a 125 is an exhaust. Its gunna make it harder to sell and you are gunna lose a bunch of money as well as you said its a bit risky.
It's my bike and I don't worry about the money and I like tuning shit up and see how far I can go with it and next year I have the Z650 and the gxr600 in de garage and 2020 de R6
I am using yamaha fz150i from 2013 until now with top set modification bore up to 65mm from 57mm (stock bore) with 19ex/22in head, throttle body 32mm, 160cc injector and tuned by Tuneboss, and the topspeed i got over 170gps with 25hp, So far I felt this is the best ecu I ever use with modification, it can handle more than a stock bike, with many features that we can control by using an apps named Tuneboss Manager Pro. For me worth to buy for stock bike and for modified bike because for stock bike I can feel that the throttle response and the speed increase about 10-15% power on road and more power will increase with topset modification.. I also have yamaha R25 and already converted to Yamaha R3 spec which is changing the R3 topset, exhaust AHM Z1, and Tuneboss for R25 with tuning (45hp) , so far I got 178kmh on gps compared to 171kmh gps (35hp) on R25 with exhaust, and Tuneboss only.. perhaps I need to drop a little bit spocket ratio to gain more speed.. Tuneboss is the best ecu. I ever use compared to others because it is not a piggyback or only fuel adjustment it is more than that, for stock bike default map is enough, but if your bike is changing spec like upgrade bore to 57mm, camshaft, head, throttle body or other parts best tuning will give a better result..
I totally agree!
Legends Garage when u dont bother reading, you just answer short😆😆
Bro where I gone buy tuneboss I look everywhere bro please let me know thank you
wait a second you called me "illegal" yet you installed an ECU to add HP (which is also illegal) HMMM
I didn't install it on my bike tho :P
But your friend did lmao, nice video btw yet again.
@@plumestuning cause I do illegal shit
So do i so, have fun with your new ECU C:
Btw you could do a subscriber spotlight where you show off the motorcycle of a subscriber that you get through discord, snapchat, instagram, etc
If you feel it still has power at redline you should up the sprocket in the front
Yeah I'm still going to do that
+10 in the back !
+10 in the back?!?! That will be slow as hell!
@@lukearmsby5507wouldn’t make a difference in that regard because it’s asking for longer gearing to support the higher top end
But is it possible at the next projext to show us and the instalation part a lit bit more? Thanks, and nice vid
The install is VERY easy just plug and play, I will make more videos about the ECU n the future!
Oh, not very into this projects thats why
That's okay.
in Malaysia there are many tuneboss ecu sales. Recently there is the launch of a new quick shifter which is ShiftBoss 2.0 also can connect phone
What is difference between the factory condition and when you installed it?
İf you know, Just say it to me i dont wanna waste my time and my money
Can You do this on Younger bikes !!
I know for sure this can be done in the 2014-2018 models. I suggest contacting TuneBoss if you have an older model.
What one did you buy, can't find the r125 one anywhere
Hey, for what I understood you need to buy the r25/r3 one, and then on the app you need to map it to your 125
On the box it said R125, but in the app it said R25. Sadly the store where I bought mine has stopped selling them.
What it's the model of ecu, in the web of tune boss don't see model for yzf r125
Can you link the site where they sell the ecu? I tried for months and I couldn't find any (I'm european too, if the site is from an european shop link it anyway)
Thanks
And if you can link the map also, my bike has the same engine
Sadly the store where I bought the Tuneboss doesn't sell them anymore.
Wich ecu model is it in particular, I’m looking forward to buy one
It said R125 on the box but R25/R3 in the tuneboss app. Perhaps they are the same? I suggest double-checking by contacting tuneboss directly.
Wow! That is nice! How much did it cost and where did You get it from? The tuneboss website does not have one for YZF R125... Please, I need one sooooo bad!
It was 280 euro, I got it at a local shop.
@@LegendsGarage Thank You! This ECU is probably from R15 or R25/R3, it is very important to know which one before ordering for R125. Do You still have the box for this ECU? If yes could You please check for any indications or marking what type/model of Yamaha Your Tune Boss was originally designed for? It should be written somewhere on the box or instruction manual. And can You please chceck the markings on the device itself? It surely has to have some markings besides the logo. Please, this is very important. And thank You again!
On the box it says R125.
TuneBoss only do r25/3 at the moment, however PVTech do an R125 ECU; it comes with software for your computer and a cable to connect, but it costs 449€ so it'll set you back a bit just for a 125.
I don't have any experience with PVtech, I looked into it, it looks like it is not as easy to use as a Tuneboss but it should do the trick.
Leuke intro! Ben van plan om voor het A1 rijbewijs te gaan en dan oftewel te gaan voor de Yamaha MT125 of de Yamaha YZF R125. Welke denk je dat beter gaat zijn wetende dat ik dagelijks van Aalst naar Brussel ga moeten rijden aangezien ik op universiteit zit en ook rekening houden met het feit dat het mijn eerste bike gaat zijn. Zou super zijn als ik feedback kan krijgen :)
Hey Risutro, de MT125 en R125 zijn redelijk gelijk, beide hebben veel de zelfde onderdelen en zelfde motorblok dus qua power ga je weinig verschil merken. Het grootste verschil zit hem in de rij positie en looks. De r125 heeft over het algemeen wel een iets hogere top snelheid aangezien die iets aero dynamischer is. Ik raad je aan om eens op beide te zitten bij een dealer en kijken wat je zelf het leukste vind.
Oke, bedankt voor de snelle reactie ! Subscribed :)
Geen probleem.
Zelfde
@@kreterta welke heb je genomen uiteindelijk ?
Hi would like to know where you got your ECU from if you could let me know would be good my bike is 2015
I got the ECU at a local bike shop.
There is not one listed for yzfr125 on there website!? Is that the one for the fz150i?
according to the TuneBoss app, it is an R25 ECU, however, we got it at a local shop so I'm not 100% sure.
@@LegendsGarage ok thanks for letting me kno!
@@LegendsGarage How much did it cost?
300 euro shipped.
My YZFR125 is stock limited to 137kmh
no its just the top speed😂😂
hi bro im from england and i have a yzf r125 2016 race blue where i buy a tune boss for my bike bro
I'm not sure if there is a TuneBoss distributor in the UK. I suggest sending an e-mail to TuneBoss.
What was the ecu called which model ?? I want one for me yzfr125
Tuneboss ECU for R125.
@@LegendsGarage Hi! There isn't any ECU for R125 on the Tuneboss website, where I can buy it?
@@Matt_2991 same where can I get one
The TuneBoss app says it's the R25 model.
Thats a nice hoodie papa
Thanks papi
would this r25 ECU work on my 2014 Yamaha mt 125 ???
I'm not sure to be honest, but i assume the r125 ECU would also work in the MT125.
is the 2023 version the fastest? because i’m going to buy a new one from the dealer, any tips please?
the 2019-2023 versions are pretty similar, I would go for the 2023 version just because of the looks :D it is beautiful but almost 6500€ (switzerland) is just too much.
So I have a yzf125r and was looking on tuneoas websites and can’t see one for my bike can you tell me which one it is you got please
I bought mine locally and just asked for a R125 ECU. The box said R125 but in the app it said R25 so I'm assuming they are using the same connector.
It makes better performance maybe. But isn't it decrease the engines lifetime?
I don't really worry about it, next year I have a maby a Z650 and a gxr600 in the garage and in 2020 the R6
With the setup we are running it should be pretty safe, we got our tune and settings from a trusted Tuneboss distributor and researcher, but there is always a risk.
@@Z9charlie so did u get an r6
@@Z9charlie so did you get an r6
how did you make them to ship it to you? it says that i only can buy it in thailand, vietnam, malaysia, mexico and the philippines..
I bought mine in a local dealership. They since have stopped selling tuneboss products.
Will this TuneBoss R25 model fit R125 2010?
I assume it does, to be sure you should check with Tuneboss.
Yo bro where is the limiter hiding on this bike swear I'm gonna take it apart bolt for bolt in a minute
The bike is limited through the ECU which can be found under the passenger seat.
Yo bro please tell me when I buy tuneboss I look everywhere and I can't find it please let me know I only have option buy powertronic but really don't believe it's work
Yeah they only sell in Asia
Which ecu did you buy? There is many typed to different bikes an yzf r125 is not there. And I cant buy it on internet?
I bought mine at local shop. The app said it was the R25 ECU.
Sir you bought the ecu for R15 or for rhe Y15ZR?
It says R15 in the Tuneboss app.
Hi I have a 2018 Yamaha MT 125. I know theyre the same engine so assume same ECU...
where did you buy this? And how straight forward was it remapping it for your exhaust. Not too fussy about changing rev limiter, just interested in fuel remapping for a aftermarket exhaust, any info from anyone would be appreciated :)
I believe is the same, tho the r125 is faster
Hey, I bought my Tuneboss at a local shop here in Belgium. Remapping it is easy and straight forward, just enter the new values in the fuel and ignition table through the app.
@@LegendsGarage which ecu you needed?
@@LegendsGaragehey, ik ben ook van belgië, waar heb je het gehaald?
Does it help at hp?
What is the acceleration from 0 to 100?
The acceleration did not change since we kept the stock sprockets.
@@LegendsGarage So what are the advantages (benefits)? (Im sorry for my english xd)
Having full control over the bike, being able to set the spark table and fuel table, safety features, moving the rpm limiter,... it has a lot of features. too many to list in a comment.
Does it works for mt 125?
I assume it does since the engine is the same as the R125 engine.
On the website I can’t find the ecu for the yzfr 125
It's very hard to get them for the R125 sadly.
Is it still fast with exhaust and ECU with out taken off the limiter
I did not get the chance to test that. I did a test run with the limiter set at 11200 and 11700.
What the price for this ecu??
This ECU was 300EUR
Whats the LINK for this ECU i need to buy it, since my 2015 engine is running lean from the black widow exhaust ive fitted
A link to the manufacturer's website should be in the description.
@@LegendsGarage the link does not work
同じYZF R125 ですが何用ですか？
Where i can buy?
Bro ik kom uit Nederland waar kan je die ecu vinden kan hem nergens vinden? Raad je powercommander 5 ook aan samne met die ecu en nog een 180 kit en KN luchtfilter
Geen idee waar hij momenteel nog beschikbaar is. Ik denk niet dat er nog een importeur is op dit moment.
How much is it? Been looking for upgrades on my mt
This one was 300EUR
Don't matter you vid just answered my question
Hi mate is you speedo in mph or kph
km/h
I think looking that your gears are short ,, I'm very happy with 16/52 but it looses out in 6th , I wonder if the ECU power addition would fix that
I strongly suggest you spend the couple of pennies on a 16t sprocket to try , I swear you'll think your riding a big bike
To get 93mph on my totally stock bike I ran 15/52 (stock is 14/52) on a high way with slingshot clean air drag reduction
If you fancy lending me that ECU .... I'd love to try it ,,
I sold my R125 over 2 years ago 😅 I always ran the stock sprocket sizes. With the ECU i found it was a good mix of acceleration and top speed.
How fast that gomafter that?
+/- 150km/h
How much this ECU? They have for 2013?
300 EUR, yes they have it for 2013 yzf r125
my 50cc sm with a 70cc bore kit looks like it has way more power and seed than your 125??? ;)
It might have, but my kawasaki ZZR has way more power than your 70cc sm ;) apples and oranges.
And the Yamaha looks and sound better
Its probably a 2 stroke
Can you do this with 2021 ?
I am not sure if this ECU will work with the new models. I suggest you contact Tuneboss directly to make sure.
Since when your bike was blue !
Its charles bike
It's my bike
it's his bike!
If I'm 5'9 can i ride this bike without having height problems? (1.77m)
I'm 1.70cm and I have no problems, I would suggest going to the dealership and sitting on one, that's the best way to see if you like the bike.
Well im going to in the near future but i guess 7cm isn't that big of a difference, right?
7cm is about 3 inches I think so not a big difference.
can you do this with the 2020 model?
I'm not sure if an aftermarket ECU is already available for the new models.
Can you get the tune boss ecu in the UK??
There are currently no distributors in the EU, If you want one you will have to order one from Asia.
Why do you have the high beam on
Because the lights are messed up, we are fixing them as soon as possible!
Hello, do you have the exact reference of your ECU? thanks
On the box it says R125, in the app it says R25.
Hoeveel kostte de ECU en waar heb je hem vandaan? Voor een 125cctje is het denk ik niet zo heel spannend haha. Ik heb zelf de mt125 nu
Deze ECU kwam op 300 euro en komt van een moto winkel hier in de buurt.
does it fit on the wr125x / r too?
Considering they use the same engine, I am guessing that it would fit on the wr125x aswell. Don't quote me on that tho.
What exhaust do you have
Blackwidow exhaust
Hallo, zou u mij kunnen zeggen waar u deze heeft aangekocht. Mvg, Dave.
Een lokale motor winkel maar deze is helaas gestopt met de verkoop van Tuneboss ECUs.
Make a Dyno test 😀
We might do one in the future :)
Why is there only one headlight on at the end??
Usually there is one headlight on the motorcycles. Another light wich is not on at the end is called "pass" light and you can use it but you have to hold it
One is low beam and one is high beam.
@@detsiedi161 aaahh thnx !!
@@LegendsGarage aahhh thnx man!
No problem !
Available for 2009 ecu ?
I think so but I'm not sure, I recommend contacting tune boss to make sure it works.
Hi man, have you gota facebook?
I want to You something about r125
All my social media is in the description.
Can I get one for the 2012 yzf 125?
I think so, Not 100% sure.
@@LegendsGarage do you have a link for where to buy these? Thanks
Mine has 151kmh stock except exhaust
But you are a dick 😂
Haha
But it sounds like shit tho.
@@LegendsGarage no full system on mine 😂😂
Can i get ECU on the r125 2018?
I am pretty sure you can.
Top speed?
+/- 150km/h (on the speedo)
Omg
Could You tell me what do You do with this Ecu?
plug and play?
Just plug it in and it works, ofcourse you have to change the settings u want. for example spark timing, fuel map,...
Is this legal to do it?
No, This is intended for use on a race track.
Why not put it on your bike?
Cause my bike has become a test bike to see if it's safe
And because he paid for it.
What ecu?
Tuneboss ECU for R125
I was looking at tuneboss Webstore and I non of the ECU's said specifically r125, which one did u get?
I would assume you used the one for the r15
On the box it said R125. However in the app it said R3.
Топ
Hi man!
I want to buy this ecu, it is for yamaha yzf-r125 2014-2018?
This bike is from 2014?
The bike in the video is a 2014 r125
@@LegendsGarage Are You sure this is r25 ecu?
On the box it says R125.
Could You give me link because this isn't r25 ecu tune boss.
R25 Ecu tune boss is bigger than this.
@@LegendsGarage I think this is r15 tune boss. I want to buy it but I have to be sure.
could you maybe send me that map that you used? i just got one but i cant find a database with maps and im not experienced with fuelmapping.
Old video. I think he has lost the map.
Old video indeed, I have the map anymore. I also don't have the bike anymore so I can't connect to the ECU to check.
Does the same tuneboss work on a yzf 125 2008 model?
I think so, not 100% sure tho
Hey, nice Video! Like it and subscribed you;) Can you say me, if it's sure that the ECU of the R25 fits perfectly fine? Worked it without any trouble? How much Kilometer is this ECU now installed? And last question: Which map did you use? Can I use all R25 Maps in the App or how did you do that?
Hey, In the tuneboss app it said R25 yes. Did 5000 km with it so far no problems. We got a map from a local shop.
You mean 1k extra, combined over all the gears 😅👍
Yes, Rev limiter was moved up from +/- 10k to +/- 11k
Legend's Garage how do u do that ??
It's a built-in feature of the Tuneboss ECU.
@@LegendsGarage isnt that bad for the engine
This was recommended by VanHove Motors, head importer and tester for Tuneboss EU. However running the engine for long periods of time at 11K RPM for example on the highway would not be recommended.
Waste of time XD
That's subjective. XD
just get a better buy jeez. All these mods are just a waste of money and labour most you should get on a 125 is an exhaust. Its gunna make it harder to sell and you are gunna lose a bunch of money as well as you said its a bit risky.
It's my bike and I don't worry about the money and I like tuning shit up and see how far I can go with it and next year I have the Z650 and the gxr600 in de garage and 2020 de R6
I don;t think it is going to be hard to sell, I get offers almost everyday :)
Does this ecu fit on the yamaha wr125x?
It's the same engine
I'm not sure, I suggest contacting tuneboss before you buy one.
Do you know if this works on 125cc mt 2020 or yzf 2020?
I'm not sure.